The Neurospora crassa CYT-18 protein C-terminal RNA-binding domain helps stabilize interdomain tertiary interactions in group I introns

The Neurospora crassa mitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) promotes the splicing of group I introns by stabilizing the catalytically active RNA structure. To accomplish this, CYT-18 recognizes conserved structural features of group I intron RNAs using regions of the N-terminal nucleotide-binding fold, intermediate alpha-helical, and C-terminal RNA-binding domains that also function in binding tRNA(Tyr). Curiously, whereas the splicing of the N. crassa mitochondrial large subunit rRNA intron is completely dependent on CYT-18's C-terminal RNA-binding domain, all other group I introns tested thus far are spliced efficiently by a truncated protein lacking this domain. To investigate the function of the C-terminal domain, we used an Escherichia coli genetic assay to isolate mutants of the Saccharomyces cerevisiae mitochondrial large subunit rRNA and phage T4 td introns that can be spliced in vivo by the wild-type CYT-18 protein, but not by the C-terminally truncated protein. Mutations that result in dependence on CYT-18's C-terminal domain include those disrupting two long-range GNRA tetraloop/receptor interactions: L2-P8, which helps position the P1 helix containing the 5'-splice site, and L9-P5, which helps establish the correct relative orientation of the P4-P6 and P3-P9 domains of the group I intron catalytic core. Our results indicate that different structural mutations in group I intron RNAs can result in dependence on different regions of CYT-18 for RNA splicing.     

Structure and assembly of group I introns

Self-splicing group I introns have served as a model for RNA catalysis and folding for over two decades. New three-dimensional structures now bring the details into view. Revelations include an unanticipated turn in the RNA backbone around the guanosine-binding pocket. Two metal ions in the active site coordinate the substrate and phosphates from all three helical domains.     

Analyzing the evolution of RNA secondary structures in vertebrate introns using Kimura's model of compensatory fitness interactions

Previous studies have shown that splicing efficiency, and thus maturation of pre-mRNA, depends on the correct folding of the RNA molecule into a secondary or higher order structure. When disrupted by a mutation, aberrant folding may result in a lower splicing efficiency. However, the structure can be restored by a second, compensatory mutation. Here, we present a logistic regression approach to analyze the evolutionary dynamics of RNA secondary structures. We apply our approach to a set of computationally predicted RNA secondary structures in vertebrate introns. Our results are consistent with the hypothesis of a negative influence of the physical distance between pairing nucleotides on the occurrence of covariations, as predicted by Kimura's model of compensatory evolution. We also confirm the hypothesis that longer local secondary structure elements (helices) can accommodate a larger number of covariations, wobbles, and mismatches. Furthermore, we find that wobbles and mismatches are more frequent in the middle of a helix, whereas covariations occur preferentially at the helix ends. The GC content is a major determinant of this pattern.     

The antiquity of group I introns.

The recent discovery of self-splicing introns in cyanobacteria has given renewed interest to the question of whether introns may have been present in the ancestor of all living things. The properties of introns in genes of bacteria and bacteriophages are discussed in the context of their possible origin and biological function.     

The natural history of group I introns

There are four major classes of introns: self-splicing group I and group II introns, tRNA and/or archaeal introns and spliceosomal introns in nuclear pre-mRNA. Group I introns are widely distributed in protists, bacteria and bacteriophages. Group II introns are found in fungal and land plant mitochondria, algal plastids, bacteria and Archaea. Group II and spliceosomal introns share a common splicing pathway and might be related to each other. The tRNA and/or archaeal introns are found in the nuclear tRNA of eukaryotes and in archaeal tRNA, rRNA and mRNA. The mechanisms underlying the self-splicing and mobility of a few model group I introns are well understood. By contrast, the role of these highly distinct processes in the evolution of the 1500 group I introns found thus far in nature (e.g. in algae and fungi) has only recently been clarified. The explosion of new sequence data has facilitated the use of comparative methods to understand group I intron evolution in a broader context and to generate hypotheses about intron insertion, splicing and spread that can be tested experimentally.     

Function of P11, a tertiary base pairing in self-splicing introns of subgroup IA

There is phylogenetic evidence for the existence of a new pairing in subgroup IA1 self-splicing introns. This tertiary interaction, called P11, which is extraneous to the catalytic centre of these ribozymes was modelled after a "pseudoknot" and grafted by computer modelling on the common core structure of group I introns that was recently proposed by Michel & Westhof. In order to probe the function of the P11 pairing, we mutated the P11 helix in the intron of the large ribosomal precursor of Saccharomyces cerevisiae mitochondria (Sc.LSU). Our experimental data show that the P11 pairing plays a role in stabilizing the overall fold of the RNA molecule. While P11 is not essential for self-splicing activity in vitro, mutants with disrupted P11 require higher concentration of MgCl2 for self-splicing. By contrast, mutants with a reinforced P11 pairing (via introduction of several G.C base-pairs) self-splice more efficiently than the wild-type at 55 degrees C. Based on this work, the possible engineering of new stable versions of the ribozyme is discussed.     

RNA tertiary interactions mediate native collapse of a bacterial group I ribozyme

Large RNAs collapse into compact intermediates in the presence of counterions before folding to the native state. We previously found that collapse of a bacterial group I ribozyme correlates with the formation of helices within the ribozyme core, but occurs at Mg2+ concentrations too low to support stable tertiary structure and catalytic activity. Here, using small-angle X-ray scattering, we show that Mg2+-induced collapse is a cooperative folding transition that can be fit by a two-state model. The Mg2+ dependence of collapse is similar to the Mg2+ dependence of helix assembly measured by partial ribonuclease T1 digestion and of an unfolding transition measured by UV hypochromicity. The correspondence between multiple probes of RNA structure further supports a two-state model. A mutation that disrupts tertiary contacts between the L9 tetraloop and its helical receptor destabilized the compact state by 0.8 kcal/mol, while mutations in the central triplex were less destabilizing. These results show that native tertiary interactions stabilize the compact folding intermediates under conditions in which the RNA backbone remains accessible to solvent.     

Molecular genetics of group I introns: RNA structures and protein factors required for splicing--a review

In vivo and in vitro genetic techniques have been widely used to investigate the structure-function relationships and requirements for splicing of group-I introns. Analyses of group-I introns from extremely diverse genetic systems, including fungal mitochondria, protozoan nuclei, and bacteriophages, have yielded results which are complementary and highly consistent. In vivo genetic studies of fungal mitochondrial systems have served to identify cis-acting sequences within mitochondrial introns, and trans-acting protein products of mitochondrial and nuclear genes which are important for splicing, and to show that some mitochondrial introns are mobile genetic elements. In vitro genetic studies of the self-splicing intron within the Tetrahymena thermophila nuclear large ribosomal RNA precursor (Tetrahymena LSU intron) have been used to examine essential and nonessential RNA sequences and structures in RNA-catalyzed splicing. In vivo and in vitro genetic analysis of the intron within the bacteriophage T4 td gene has permitted the detailed examination of mutant phenotypes by analyzing splicing in vivo and self-splicing in vitro. The genetic studies combined with phylogenetic analysis of intron structure based on comparative nucleotide sequence data [Cech 73 (1988) 259-271] and with biochemical data obtained from in vitro splicing experiments have resulted in significant advances in understanding the biology and chemistry of group-I introns.     

Fidelity of secondary and tertiary interactions in tRNA.

Contingency table analysis has previously been used to detect sequence correlations in RNAs caused by either secondary or tertiary interactions. An approach known as matrix reduction is developed here as an alternative to the usual Chi square test. This approach is especially sensitive to covariation between equivalent positions and is effective at detecting tertiary interactions that exhibit such covariation. Matrix reduction was also effective at detecting Watson-Crick base-pairs that exhibit a high degree of pairing fidelity. The method was applied to five closely related structural classes of tRNA and a number of tertiary interactions were detected in each class.     

Identification of a family of group II introns encoding LAGLIDADG ORFs typical of group I introns

Group I and group II introns are unrelated classes of introns that each encode proteins that facilitate intron splicing and intron mobility. Here we describe a new subfamily of nine introns in fungi that are group II introns but encode LAGLIDADG ORFs typical of group I introns. The introns have fairly standard group IIB1 RNA structures and are inserted into three different sites in SSU and LSU rRNA genes. Therefore, introns should not be assumed to be group I introns based solely on the presence of a LAGLIDADG ORF.     

Atomic level architecture of group I introns revealed

Twenty-two years after their discovery as ribozymes, the self-splicing group I introns are finally disclosing their architecture at the atomic level. The crystal structures of three group I introns solved at moderately high resolution (3.1-3.8A) reveal a remarkably conserved catalytic core bound to the metal ions required for activity. The structure of the core is stabilized by an intron-specific set of long-range interactions that involves peripheral elements. Group I intron structures thus provide much awaited and extremely valuable snapshots of how these ribozymes coordinate substrate binding and catalysis.     

Conserved sequences and structures of group I introns: building an active site for RNA catalysis--a review

Group I introns fold to form an active site to mediate their own RNA splicing. Sequence elements conserved among the available set of 66 group I introns are compiled. Comparative sequence analysis leads to the prediction of some conserved structural features that have not been widely appreciated. The possible significance of conserved nucleotides within base-paired duplexes is discussed; they might be involved in base triplets or alternate pairing interactions.     

Origin and evolution of chloroplast group I introns in lichen algae

The history of group I introns is characterized by repeated horizontal transfers, even among phylogenetically distant species. The symbiogenetic thalli of lichens are good candidates for the horizontal transfer of genetic material among distantly related organisms, such as fungi and green algae. The main goal of this study was to determine whether there were different trends in intron distribution and properties among Chlorophyte algae based on their phylogenetic relationships and living conditions. Therefore, we investigated the occurrence, distribution and properties of group I introns within the chloroplast LSU rDNA in 87 Chlorophyte algae including lichen and free‐living Trebouxiophyceae compared to free‐living non‐Trebouxiophyceae species. Overall, our findings showed that there was high diversity of group I introns and homing endonucleases (HEs) between Trebouxiophyceae and non‐Trebouxiophyceae Chlorophyte algae, with divergence in their distribution patterns, frequencies and properties. However, the differences between lichen Trebouxiophyceae and free‐living Trebouxiophyceae were smaller. An exception was the cL2449 intron, which was closely related to ω elements in yeasts. Such introns seem to occur more frequently in lichen Trebouxiophyceae compared to free‐living Trebouxiophyceae. Our data suggest that lichenization and maintenance of lichen symbiosis for millions of years of evolution may have facilitated horizontal transfers of specific introns/HEs between symbionts. The data also suggest that sequencing of more chloroplast genes harboring group I introns in diverse algal groups may help us to understand the group I intron/HE transmission process within these organisms.     

Toward predicting self-splicing and protein-facilitated splicing of group I introns

In the current era of massive discoveries of noncoding RNAs within genomes, being able to infer a function from a nucleotide sequence is of paramount interest. Although studies of individual group I introns have identified self-splicing and nonself-splicing examples, there is no overall understanding of the prevalence of self-splicing or the factors that determine it among the >2300 group I introns sequenced to date. Here, the self-splicing activities of 12 group I introns from various organisms were assayed under six reaction conditions that had been shown previously to promote RNA catalysis for different RNAs. Besides revealing that assessing self-splicing under only one condition can be misleading, this survey emphasizes that in vitro self-splicing efficiency is correlated with the GC content of the intron (>35% GC was generally conductive to self-splicing), and with the ability of the introns to form particular tertiary interactions. Addition of the Neurospora crassa CYT-18 protein activated splicing of two nonself-splicing introns, but inhibited the second step of self-splicing for two others. Together, correlations between sequence, predicted structure and splicing begin to establish rules that should facilitate our ability to predict the self-splicing activity of any group I intron from its sequence.     

Vertical evolution and intragenic spread of lichen-fungal group I introns

One family within the Euascomycetes (Ascomycota), the lichen-forming Physciaceae, is particularly rich in nuclear ribosomal [r]DNA group I introns. We used phylogenetic analyses of group I introns and lichen-fungal host cells to address four questions about group I intron evolution in lichens, and generally in all eukaryotes: 1) Is intron spread in the lichens associated with the intimate association of the fungal and photosynthetic cells that make up the lichen thallus? 2) Are the multiple group I introns in the lichen-fungi of independent origins, or have existing introns spread into novel sites in the rDNA? 3) If introns have moved to novel sites, then does the exon context of these sites provide insights into the mechanism of intron spread? and 4) What is the pattern of intron loss in the small subunit rDNA gene of lichen-fungi? Our analyses show that group I introns in the lichen-fungi and in the lichen-algae (and lichenized cyanobacteria) do not share a close evolutionary relationship, suggesting that these introns do not move between the symbionts. Many group I introns appear to have originated in the common ancestor of the Lecanorales, whereas others have spread within this lineage (particularly in the Physciaceae) putatively through reverse-splicing into novel rRNA sites. We suggest that the evolutionary history of most lichen-fungal group I introns is characterized by rare gains followed by extensive losses in descendants, resulting in a sporadic intron distribution. Detailed phylogenetic analyses of the introns and host cells are required, therefore, to distinguish this scenario from the alternative hypothesis of widespread and independent intron gains in the different lichen-fungal lineages.     

Molecular phylogeny of phyllopharyngean ciliates and their group I introns

We analyzed small subunit ribosomal DNA (ssu-rDNA) sequences to evaluate both the monophyly of the ciliate class Phyllopharyngea de Puytorac et al. (1974), and relationships among subclasses. Classifications based on morphology and ultrastructure divide the Phyllopharyngea into four subclasses, the Phyllopharyngia, Chonotrichia, Rhynchodia, and Suctoria. Our analyses of ssu-rDNA genealogies derived from sequence data collected from diverse members representing three of the four subclasses of Phyllopharyngea (Suctoria: Ephelota spp., Prodiscophyra collini, Acineta sp.; Phyllopharyngia: Chlamydodon exocellatus, Chlamydodon triquetrus, Dysteria sp.; and Chonotrichia: Isochona sp.) provide strong support for the monophyly of the Phyllopharyngea, and show that the Chonotrichia emerge from within the Phyllopharyngia. Based on this initial sampling, suctorian budding types are monophyletic, and exogenous budding appears to be basal to evaginative and endogenous budding. Further, we report the discovery of a group I intron at position 891 in the Suctoria Acineta sp. and Tokophrya lemnarum, and a second group I intron at position 1506 in T. lemnarum. These introns represent only the second examples of group I introns in a ciliate ribosomal gene, since the discovery of ribozymes in the LSU rRNA gene of Tetrahymena thermophila. Phylogenetic analyses of Group I introns suggest a complex evolutionary history involving either multiple loses or gains of introns within endogenously budding Suctoria.     

The tertiary structure of group II introns: implications for biological function and evolution

Group II introns are some of the largest ribozymes in nature, and they are a major source of information about RNA assembly and tertiary structural organization. These introns are of biological significance because they are self-splicing mobile elements that have migrated into diverse genomes and played a major role in the genomic organization and metabolism of most life forms. The tertiary structure of group II introns has been the subject of many phylogenetic, genetic, biochemical and biophysical investigations, all of which are consistent with the recent crystal structure of an intact group IIC intron from the alkaliphilic eubacterium Oceanobacillus iheyensis. The crystal structure reveals that catalytic intron domain V is enfolded within the other intronic domains through an elaborate network of diverse tertiary interactions. Within the folded core, DV adopts an activated conformation that readily binds catalytic metal ions and positions them in a manner appropriate for reaction with nucleic acid targets. The tertiary structure of the group II intron reveals new information on motifs for RNA architectural organization, mechanisms of group II intron catalysis, and the evolutionary relationships among RNA processing systems. Guided by the structure and the wealth of previous genetic and biochemical work, it is now possible to deduce the probable location of DVI and the site of additional domains that contribute to the function of the highly derived group IIB and IIA introns.