Octamer-primed sequencing technology: effects of dNTP supplementation

Octamer-primed sequencing is a directed DNA sequencing strategy that employs the use of a presynthesized octamer primer library. Together with electronic octamer sequencing technology (eOST) it provides a faster, less expensive way to obtain DNA sequence information and can be used as a valuable tool for gap closure in large-scale genomic sequencing. In this paper we discuss the effect of dGTP/TTP supplementation on octamer sequencing. We show that addition of 75 µM dGTP and 5 µM TTP can improve the sequencing success rate by increasing the length and accuracy of generated sequence information. We also discuss the effect of template base composition immediately downstream of the octamer primer on the outcome of octamer sequencing.     

Octamer-primed cycle sequencing using dye-terminator chemistry.

Octamer Sequencing Technology, OST, is a method of DNA sequencing using single octamer oligonucleotides to prime cycle sequencing reactions. This sequencing strategy is faster than a traditional primer-walking strategy, since access to this optimized octamer library eliminates delays associated with designing and synthesizing gene specific primers. In this report, OST has been optimized for fluorescent, dye-terminator cycle sequencing reactions to facilitate parallel processing of samples. The successful adaptation of OST to an automated sequencing platform and the design of and access to an octamer library are critical steps towards developing an efficient 'closed-loop' DNA sequencing system.     

Simultaneous amplification of exons 18 to 21 of the EGFR gene using 5′ tailed primers and a two-stage protocol

Objective: Reduction of non-specific amplification and achievement of efficient amplification of multiple gene fragments under the same reaction condition is the basic goal of PCR diagnosis; however, this is often difficult. This study was conducted to establish a highly specific and effective amplification of the epidermal growth factor receptor (EGFR) gene's exons, 18–21, simultaneously. Methods: The 5′-tailed primers were synthesized by adding 10 to 20 bp of a non-specific sequence to the 5′-terminus of sequence-specific primers (tailless primers). The two-stage protocol consisted of 5–10 cycles of a conventional 3-step cycling, which was then followed by 30–35 cycles of two-step cycling. The exons 18–21 of EGFR gene were amplified in 28 non-small cell lung cancer (NSCLC) patients using an optimized PCR that combined 5′ tailed primers with a two-stage protocol. Results: The 5′ tailed primers exhibited a wider range of suitable annealing temperatures, similar range of primer concentration, similar sensitivity, specificity, and reproducibility, as well as a reduced, non-specific amplification compared with the corresponding tailless primers. The amplification of exons 18–21 of EGFR gene in NSCLC patients revealed that a combination of 5′ tailed primers with two-stage protocol (optimized PCR) had a similar PCR success rate (P = 0.873) but had significantly reduced non-specific amplification (P <0.001) compared to conventional PCR. Conclusion: 5′ tailed primers exhibited a wider range of suitable annealing temperatures and improved specificity compared with conventional PCR primers. An optimized PCR was established with 5′ tailed primers and a two-stage protocol to amplify exons 18–21 of the EGFR gene in NSCLC patients.     

Octamer-primed sequencing technology: development of primer identification software

Octamer sequencing technology (OST) is a primer-directed sequencing strategy in which an individual octamer primer is selected from a pre-synthesized octamer primer library and used to sequence a DNA fragment. However, selecting candidate primers from such a library is time consuming and can be a bottleneck in the sequencing process. To accelerate the sequencing process and to obtain high quality sequencing data, a computer program, electronic OST or eOST, was developed to automatically identify candidate primers from an octamer primer library. eOST integrates the base calling software PHRED to provide a quality assessment for target sequences and identifies potential primer binding sites located within a high quality target region. To increase the sequencing success rate, eOST includes a simple dynamic folding algorithm to automatically calculate the free energy and predict the secondary structure within the template in the vicinity of the octamer-binding site. Several parameters were found to be important, including base quality threshold, the window size of the template sequence segment, and the threshold ΔG value. OST, coupled with the eOST software, can be used to sequence short DNA fragments or in the finishing assembly stage of large-scale sequencing of genomic DNA.     

Linkage Analysis with Multiplexed Short Tandem Repeat Polymorphisms Using Infrared Fluorescence and M13 Tailed Primers

The use of short tandem repeat polymorphisms (STRPs) as marker loci for linkage analysis is becoming increasingly important due to their large numbers in the human genome and their high degree of polymorphism. Fluorescence-based detection of the STRP pattern with an automated DNA sequencer has improved the efficiency of this technique by eliminating the need for radioactivity and producing a digitized autoradiogram-like image that can be used for computer analysis. In an effort to simplify the procedure and to reduce the cost of fluorescence STRP analysis, we have developed a technique known as multiplexing STRPs with tailed primers (MSTP) using primers that have a 19-bp extension, identical to the sequence of an M13 sequencing primer, on the 5′ end of the forward primer in conjunction with multiplexing several primer pairs in a single polymerase chain reaction (PCR) amplification. The banding pattern is detected with the addition of the M13 primer-dye conjugate as the sole primer conjugated to the fluorescent dye, eliminating the need for direct conjugation of the infrared fluorescent dye tn the STRP primers. The use of MSTP for linkage analysis greatly reduces the number of PCR reactions. Up to five primer pairs can be multiplexed together in the same reaction. At present, a set of 148 STRP markers spaced at an average genetic distance of 28 cM throughout the autosomal genome can be analyzed in 37 sets of multiplexed amplification reactions. We have automated the analysis of these patterns for linkage using software that both detects the STRP banding pattern and determines their sizes. This information can then be exported in a user-defined format from a database manager for linkage analysis.     

小尾寒羊微卫星与RAPD标记的研究

小尾寒羊是世界上具有非季节性发情和多胎特性的高繁殖率绵羊品种之一。选择4个位于绵羊6号染色体上且与FecB基因紧密连锁的微卫星标记,对小尾寒羊基因组进行PCR扩增后,采用最小二乘法估计各等位基因片段对产羔数的影响。分析结果表明,等位基因OarJIA-5、OarJIA-10、BM143-12和OarHH55-11可以作为小尾寒羊多胎位点的分子标记。从100条随机引物中筛选出18条引物,对小尾寒羊、大尾寒羊、洼地绵羊、滩羊等4个绵羊品种和鲁北山羊的基因组进行扩增,共扩增出146条带,其中94条表现出多态性,占64．60%,同时扩增出每个品种的特异性条带。采用Nei氏标准距离和NJ聚类分析对不同品种的遗传关系进行分析,结果表明,4个绵羊品种亲缘关系很近,提示它们可能起源于共同的原始祖先。     

Site-directed, Ligase-Independent Mutagenesis (SLIM): a single-tube methodology approaching 100% efficiency in 4 h

Site-directed, Ligase-Independent Mutagenesis (SLIM) is a novel PCR-mediated mutagenesis approach that can accommodate all three sequence modification types (insertion, deletion and substitution). The method utilizes an inverse PCR amplification of the template by two tailed long primers and two short primers in a single reaction with all steps carried out in one tube. The tailed primers are designed to contain the desired mutation on complementary overhangs at the terminus of PCR products. Upon post-amplification denaturation and re-annealing, heteroduplex formation between the mixed PCR products creates the desired clonable mutated plasmid. The technique is highly robust and suitable for applications in high-throughput gene engineering and library constructions. In this study, SLIM was employed to create sequence insertions, deletion and substitution within bacteriophage T7 gene 5. The overall efficiency for obtaining the desired product was >95%.     

Ligation mediated fluorescent labeling of DNA sequencing primers.

Automated DNA sequencing utilizing fluorescently labeled primers is a proven methodology for generating quality sequence data. However, for directed primer walking strategies this necessitates synthesis and labeling of a unique primer for each sequencing reaction. Here, we describe a rapid ligation-based method of generating labeled sequencing primers. An unlabeled 5'-phosphorylated sequencing primer is ligated to a fluorescent oligonucleotide by use of a bridge primer which is complementary to portions of the previous two oligonucleotides, thus aligning them properly for ligation. The resulting fluorescent hybrid primer can be utilized directly in cycle sequencing reactions without any prior purification.     

小鼠肝脏MicroRNA的提取与分离

本文对小鼠肝脏microRNA进行分离制备及相关性功能研究.采用poly(A)加尾方法,分离提取小鼠肝脏中的microRNA;利用T4 RNA连接酶,在microRNA两端加上连接引物,通过RT PCR制备microRNA的cDNA文库;经过对cDNA文库的质粒连接,克隆测序获得microRNA. 结果显示：获得4条有效序列,其中包括2条已知序列miR 122和2条未知小分子RNA序列.经查证, 2条microRNA片段在miRBase库中未有记录,在二级结构分析中可形成茎环结构,符合microRNA的特征. BLAST比对显示： 2个序列位于小鼠载脂蛋白B基因和小鼠28S核糖体RNA上,可能与基因调控有关,其功能有待进一步研究.     

An innovative SNP genotyping method adapting to multiple platforms and throughputs

Key message

An innovative genotyping method designated as semi-thermal asymmetric reverse PCR (STARP) was developed for genotyping individual SNPs with improved accuracy, flexible throughputs, low operational costs, and high platform compatibility.

Abstract

Multiplex chip-based technology for genome-scale genotyping of single nucleotide polymorphisms (SNPs) has made great progress in the past two decades. However, PCR-based genotyping of individual SNPs still remains problematic in accuracy, throughput, simplicity, and/or operational costs as well as the compatibility with multiple platforms. Here, we report a novel SNP genotyping method designated semi-thermal asymmetric reverse PCR (STARP). In this method, genotyping assay was performed under unique PCR conditions using two universal priming element-adjustable primers (PEA-primers) and one group of three locus-specific primers: two asymmetrically modified allele-specific primers (AMAS-primers) and their common reverse primer. The two AMAS-primers each were substituted one base in different positions at their 3′ regions to significantly increase the amplification specificity of the two alleles and tailed at 5′ ends to provide priming sites for PEA-primers. The two PEA-primers were developed for common use in all genotyping assays to stringently target the PCR fragments generated by the two AMAS-primers with similar PCR efficiencies and for flexible detection using either gel-free fluorescence signals or gel-based size separation. The state-of-the-art primer design and unique PCR conditions endowed STARP with all the major advantages of high accuracy, flexible throughputs, simple assay design, low operational costs, and platform compatibility. In addition to SNPs, STARP can also be employed in genotyping of indels (insertion–deletion polymorphisms). As vast variations in DNA sequences are being unearthed by many genome sequencing projects and genotyping by sequencing, STARP will have wide applications across all biological organisms in agriculture, medicine, and forensics.

     

Multiplex random priming of internal restriction fragments for DNA sequencing.

An approach for DNA sequencing is described that circumvents the need for synthetic oligonucleotide primers, which seriously restrict the progress of DNA sequencing in the commonly used protocol. The method is based on the use of short restriction fragments as primers randomly distributed along single-stranded templates. Premapping of target DNA is eliminated and subcloning manipulation is minimized. This method has been used successfully for sequencing genes in the range of 2 kb, for which about 10 restriction fragment primers per kilobase were sufficient to generate a continuous overlapping sequence in alignment. The approach has also been readily applied for an automated sequencing system with the fluorescent chain-terminating dideoxynucleotides, thus implying its potential for sequencing large genomic DNAs.     

3-Nitropyrrole and 5-nitroindole as universal bases in primers for DNA sequencing and PCR.

3-Nitropyrrole and 5-nitroindole have been assessed as universal bases in primers for dideoxy DNA sequencing and in the polymerase chain reaction (PCR). In contrast to a previous report, we have found that the introduction of more than one 3-nitropyrrole residue at dispersed positions into primers significantly reduced their efficiency in PCR and sequencing reactions. Primers containing 5-nitroindole at multiple dispersed positions were similarly affected; for both bases only a small number of substitutions were tolerated. In PCR experiments neither base, when incorporated into primers in codon third positions, was as effective as hypoxanthine, which was incorporated in six codon third positions in a 20mer oligomer. However, primers containing up to four consecutive 5-nitroindole substitutions performed well in both PCR and sequencing reactions. Consecutive 3-nitropyrrole substitutions were tolerated, but less well in comparable reactions.     

DPSN：扩增子测序引物标准化命名数据库

扩增子测序是目前用来衡量微生物多样性时使用最广泛的测序手段。因为其扩增的需要,所以选择合适的特定引物是必需的,且其对结果影响甚大。probeBase是目前最常用的记录了人工校正后的rRNA探针和引物的数据库。然而,我们发现probeBase中63.58%的引物存在不同程度的注释错误,包括命名重复、命名无规律以及匹配位置错误等。更严重的是,目前主流的短命名方式不具有唯一性,导致对应关系模糊不清。因此,我们定义了更简单可行的短命名标准并开发了新的引物科学命名数据库（DPSN）,并对probeBase里的所有173个引物进行了校正,并新加入了4个新的改良引物以及38个针对大亚基的新引物。新的短命名规则包含3个基本要素：在正链5''端的位置、版本号和方向。此外在前面加入了识别大/小亚基以及主要针对的菌界的标志。使用DPSN,可以快速查找感兴趣区域对应的引物并比较不同版本的差异选择合适的引物。同时还能建立命名与序列的明确一一对应关系,避免歧义。     

CircumVent thermal cycle sequencing and alternative manual and automated DNA sequencing protocols using the highly thermostable VentR (exo-) DNA polymerase.

CircumVent thermal cycle and standard DNA sequencing protocols utilizing the cloned and highly thermostable VentR (exo-) DNA polymerase are described. The thermal cycle sequencing procedures are advantageous because they allow fast and simple semiautomation of the sequencing reaction; make possible the direct DNA sequencing of PCR products, bacterial colonies and phage plaques; require only femtomoles of template DNA; eliminate the requirement of an independent primer annealing step; remove the requirement of denatured plasmids for sequencing double-stranded templates; and use a highly thermostable DNA polymerase for sequencing through potential recalcitrant secondary structure domains and large linear double-stranded DNA templates such as lambda derivatives. More standard methods of DNA sequencing (i.e., a one-step protocol and a labeling-termination protocol) are also presented. For each protocol, alternatives for choice of label and method of labeling are presented, including the use of 5' biotinylated primers for chemiluminescent DNA sequencing and fluorinated primers for automated sequencing using the BaseStation Automated DNA Sequencer.     

Locked nucleic acids in PCR primers increase sensitivity and performance

The incorporation of locked nucleic acids (LNAs) into oligonucleotide primers has been shown to increase template binding strength and specificity for DNA amplification. Real-time PCR and DNA sequencing have been shown to be significantly enhanced by the use of LNAs. Theoretically, increasing primers' binding strength may also increase the sensitivity of conventional PCR, reducing minimum template requirements. We compared LNA-modified PCR primers with their standard DNA counterparts for amplification sensitivity with template amounts as low as 5 pg. Although the results are highly dependent on the design of the LNA primers, large increases in peak height can be achieved from as little as 75 pg, as well as clearer and more complete profiles. Increased amplification success with lower template amounts may also be seen. Additionally, the use of LNAs can enhance multiplexing. Thus, incorporating LNAs into PCR primers can increase amplification success, sensitivity, and performance under a wide range of conditions.     

SOP3: a web-based tool for selection of oligonucleotide primers for single nucleotide polymorphism analysis by Pyrosequencing

SOP3 is a web-based software tool for designing oligonucleotide primers for use in the analysis of single nucleotide polymorphisms (SNPs). Accessible via the Internet, the application is optimized for developing the PCR and sequencing primers that are necessary for Pyrosequencing. The application accepts as input gene name, SNP reference sequence number, or chromosomal nucleotide location. Output can be parsed by gene name, SNP reference number, heterozygosity value, location, chromosome, or function. The location of an individual polymorphism, such as an intron, exon, or 5' or 3' untranslated region is indicated, as are whether nucleotide changes in an exon are associated with a change in an amino acid sequence. SOP3 presents for each entry a set of forward and biotinylated reverse PCR primers as well as a sequencing primer for use during the analysis of SNPs by Pyrosequencing. Theoretical pyrograms for each allele are calculated and presented graphically. The method has been tested in the development of Pyrosequencing assays for determining SNPs and for deletion/insertion polymorphisms in the human genome. Of the SOP3-designed primer sets that were tested, a large majority of the primer sets have successfully produced PCR products and Pyrosequencing data.     

Nitroindoles as Universal Bases

Abstract

Nitroindoles behave as non-discriminatory bases when incorporated into oligodeoxynucleotides, without causing significant destabilisation of the duplex, and exhibit higher melting temperatures than 3-nitropyrrole. When 5-nitroindole and 3-nitropyrrole are incorporated into oligomers for use as primers for sequencing and the polymerase chain reaction, both give products but are not as effective as hypoxanthine.     

Chromosomal Assignment of Short cDNA Sequences by PCR Using Overlapping and Tailed Short Primers

Overlapping primers and tailed short primers are effective agentsfor mapping very short cDNA sequences. By using such primers,human cDNAs as short as 32 nucleotides in length can producePCR bands. Using these and other primers of ordinary size, 44cDNAs were assigned to chromosomes, of which 24 were assignedto single chromosomes, and 2 were assigned to two chromosomesand two were assigned to three chromosomes, respectively. Amongthe 24 cDNAs, all of which matched GenBank entries, 6 cDNAswere observed to map to the same chromosomes as reported previously.