Mechanism for aldose-ketose interconversion by D-xylose isomerase involving ring opening followed by a 1,2-hydride shift

The active site and mechanism of D-xylose isomerase have been probed by determination of the crystal structures of the enzyme bound to various substrates, inhibitors and cations. Ring-opening is an obligatory first step of the reaction and is believed to be the rate-determining step for the aldose to ketose conversion. The structure of a complex with a cyclic thio-glucose has been determined and it is concluded that this is an analogue of the Michaelis complex. At -10 degrees C substrates in crystals are observed in the extended chain form. The absence of an appropriately situated base for either the cyclic or extended chain forms from the substrate binding site indicates that the isomerisation does not take place by an enediol or enediolate mechanism. Binding of a trivalent cation places an additional charge at the active site, producing a substrate complex that is analogous to a possible transition state. Of the two binding sites for divalent cations, [1] is permanently occupied under catalytic conditions and is co-ordinated to four carboxylate groups. In the absence of substrate it is exposed to solvent, and in the Michaelis complex analogue, site [1] is octahedrally coordinated, with ligands to O-3 and O-4 of the thiopyranose. In the complex with an open-chain substrate it remains octahedrally co-ordinated, with ligands to O-2 and O-4. Binding at a second cation site [2] is also necessary for catalysis and this site is believed to bind Co2+ more strongly than site [1]. This site is octahedrally co-ordinated to three carboxylate groups (bidentate co-ordination to one of them), an imidazole and a solvent molecule. It is proposed that during the hydride shift the C-O-1 and C-O-2 bonds of the substrate are polarized by the close approach of the site [2] cation. In the transition-state analogue this cation is observed at a site [2'], 1.0 A from site [2] and about 2.7 A from O-1 and O-2 of the substrate. It is likely that co-ordination of the cation to O-1 and O-2 would be concomitant with ionisation of the sugar hydroxyl group. The polarisation of C-O-1 and C-O-2 is assisted by the co-ordination of O-2 to cation [1] and O-1 to a lysine side-chain.(ABSTRACT TRUNCATED AT 400 WORDS)     

A metal-mediated hydride shift mechanism for xylose isomerase based on the 1.6 A Streptomyces rubiginosus structures with xylitol and D-xylose

The crystal structure of recombinant Streptomyces rubiginosus D-xylose isomerase (D-xylose keto-isomerase, EC 5.3.1.5) solved by the multiple isomorphous replacement technique has been refined to R = 0.16 at 1.64 A resolution. As observed in an earlier study at 4.0 A (Carrell et al., J. Biol. Chem. 259: 3230-3236, 1984), xylose isomerase is a tetramer composed of four identical subunits. The monomer consists of an eight-stranded parallel beta-barrel surrounded by eight helices with an extended C-terminal tail that provides extensive contacts with a neighboring monomer. The active site pocket is defined by an opening in the barrel whose entrance is lined with hydrophobic residues while the bottom of the pocket consists mainly of glutamate, aspartate, and histidine residues coordinated to two manganese ions. The structures of the enzyme in the presence of MnCl2, the inhibitor xylitol, and the substrate D-xylose in the presence and absence of MnCl2 have also been refined to R = 0.14 at 1.60 A, R = 0.15 at 1.71 A, R = 0.15 at 1.60 A, and R = 0.14 at 1.60 A, respectively. Both the ring oxygen of the cyclic alpha-D-xylose and its C1 hydroxyl are within hydrogen bonding distance of NE2 of His-54 in the structure crystallized in the presence of D-xylose. Both the inhibitor, xylitol, and the extended form of the substrate, D-xylose, bind such that the C2 and C4 OH groups interact with one of the two divalent cations found in the active site and the C1 OH with the other cation. The remainder of the OH groups hydrogen bond with neighboring amino acid side chains. A detailed mechanism for D-xylose isomerase is proposed. Upon binding of cyclic alpha-D-xylose to xylose isomerase, His-54 acts as the catalytic base in a ring opening reaction. The ring opening step is followed by binding of D-xylose, involving two divalent cations, in an extended conformation. The isomerization of D-xylose to D-xylulose involves a metal-mediated 1,2-hydride shift. The final step in the mechanism is a ring closure to produce alpha-D-xylulose. The ring closing is the reverse of the ring opening step. This mechanism accounts for the majority of xylose isomerase's biochemical properties, including (1) the lack of solvent exchange between the 2-position of D-xylose and the 1-pro-R position of D-xylulose, (2) the chemical modification of histidine and lysine, (3) the pH vs. activity profile, and (4) the requirement for two divalent cations in the mechanism.     

Xylose isomerase in substrate and inhibitor michaelis states: atomic resolution studies of a metal-mediated hydride shift

Xylose isomerase (E.C. 5.3.1.5) catalyzes the interconversion of aldose and ketose sugars and has an absolute requirement for two divalent cations at its active site to drive the hydride transfer rates of sugar isomerization. Evidence suggests some degree of metal movement at the second metal site, although how this movement may affect catalysis is unknown. The 0.95 A resolution structure of the xylitol-inhibited enzyme presented here suggests three alternative positions for the second metal ion, only one of which appears positioned in a catalytically competent manner. To complete the reaction, an active site hydroxyl species appears appropriately positioned for hydrogen transfer, as evidenced by precise bonding distances. Conversely, the 0.98 A resolution structure of the enzyme with glucose bound in the alpha-pyranose state only shows one of the metal ion conformations at the second metal ion binding site, suggesting that the linear form of the sugar is required to promote the second and third metal ion conformations. The two structures suggest a strong degree of conformational flexibility at the active site, which seems required for catalysis and may explain the poor rate of turnover for this enzyme. Further, the pyranose structure implies that His53 may act as the initial acid responsible for ring opening of the sugar to the aldose form, an observation that has been difficult to establish in previous studies. The glucose ring also appears to display significant segmented disorder in a manner suggestive of ring opening, perhaps lending insight into means of enzyme destabilization of the ground state to promote catalysis. On the basis of these results, we propose a modified version of the bridged bimetallic mechanism for hydride transfer in the case of Streptomyces olivochromogenes xylose isomerase.     

Crystal structure of rabbit phosphoglucose isomerase complexed with its substrate D-fructose 6-phosphate.

Phosphoglucose isomerase (PGI, EC 5.3.1.9) catalyzes the interconversion of D-glucose 6-phosphate (G6P) and D-fructose 6-phosphate (F6P) and plays important roles in glycolysis and gluconeogenesis. Biochemical characterization of the enzyme has led to a proposed multistep catalytic mechanism. First, the enzyme catalyzes ring opening to yield the open chain form of the substrate. Then isomerization proceeds via proton transfer between C2 and C1 of a cis-enediol(ate) intermediate to yield the open chain form of the product. Catalysis proceeds in both the G6P to F6P and F6P to G6P directions, so both G6P and F6P are substrates. X-ray crystal structure analysis of rabbit and bacterial PGI has previously identified the location of the enzyme active site, and a recent crystal structure of rabbit PGI identified Glu357 as a candidate functional group for transferring the proton. However, it was not clear which active site amino acid residues catalyze the ring opening step. In this paper, we report the X-ray crystal structure of rabbit PGI complexed with the cyclic form of its substrate, D-fructose 6-phosphate, at 2.1 A resolution. The location of the substrate relative to the side chains of His388 suggest that His388 promotes ring opening by protonating the ring oxygen. Glu216 helps to position His388, and a water molecule that is held in position by Lys518 and Thr214 accepts a proton from the hydroxyl group at C2. Comparison to a structure of rabbit PGI with 5PAA bound indicates that ring opening is followed by loss of the protonated water molecule and conformational changes in the substrate and the protein so that a helix containing amino acids 513-520 moves in toward the substrate to form additional hydrogen bonds with the substrate.     

The mechanism of sugar phosphate isomerization by glucosamine 6-phosphate synthase

Glucosamine 6-phosphate synthase converts fructose-6P into glucosamine-6P or glucose-6P depending on the presence or absence of glutamine. The isomerase activity is associated with a 40-kDa C-terminal domain, which has already been characterized crystallographically. Now the three-dimensional structures of the complexes with the reaction product glucose-6P and with the transition state analog 2-amino-2-deoxyglucitol-6P have been determined. Glucose-6P binds in a cyclic form whereas 2-amino-2-deoxyglucitol-6P is in an extended conformation. The information on ligand-protein interactions observed in the crystal structures together with the isotope exchange and site-directed mutagenesis data allow us to propose a mechanism of the isomerase activity of glucosamine-6P synthase. The sugar phosphate isomerization involves a ring opening step catalyzed by His504 and an enolization step with Glu488 catalyzing the hydrogen transfer from C1 to C2 of the substrate. The enediol intermediate is stabilized by a helix dipole and the epsilon-amino group of Lys603. Lys485 may play a role in deprotonating the hydroxyl O1 of the intermediate.     

Dissection of a metal-ion-mediated conformational change in Tetrahymena ribozyme catalysis

Conformational changes are often required for the biological function of RNA molecules. In the Tetrahymena group I ribozyme reaction, a conformational change has been suggested to occur upon binding of the oligonucleotide substrate (S) or the guanosine nucleophile (G), leading to stronger binding of the second substrate. Recent work showed that the two substrates are bridged by a metal ion that coordinates both the nonbridging reactive phosphoryl oxygen of S and the 2'-OH of G. These results suggest that the energy from the metal ion substrate interactions is used to drive the proposed conformational change. In this work, we provide an experimental test for this model. The results provide strong support for the proposed conformational change and for a central role of the bridging metal ion in this change. The results from this work, combined with previous data, allow construction of a two-state model that quantitatively accounts for all of the observations in this and previous-work. This model provides a conceptual and quantitative framework that will facilitate understanding and further probing of the energetic and structural features of this conformational change and its role in catalysis.     

Computational studies of the farnesyltransferase ternary complex part II: the conformational activation of farnesyldiphosphate

Studies aimed at elucidating the reaction mechanism of farnesyltransferase (FTase), which catalyzes the prenylation of many cellular signaling proteins including Ras, has been an active area of research. Much is known regarding substrate binding and the impact of various catalytic site residues on catalysis. However, the molecular level details regarding the conformational rearrangement of farnesyldiphosphate (FPP), which has been proposed via structural analysis and mutagenesis studies to occur prior to the chemical step, is still poorly understood. Following on our previous computational characterization of the resting state of the FTase ternary complex, the thermodynamics of the conformational rearrangement step in the absence of magnesium was investigated for the wild type FTase and the Y300Fbeta mutant complexed with the peptide CVIM. In addition, we also explored the target dependence of the conformational activation step by perturbing isoleucine into a leucine (CVLM). The calculated free energy profiles of the proposed conformational transition confirm the presence of a stable intermediate state, which was identified only when the diphosphate is monoprotonated (FPP2-). The farnesyl group in the computed intermediate state assumes a conformation similar to that of the product complex, particularly for the first two isoprene units. We found that Y300beta can readily form hydrogen bonds with either of the phosphates of FPP. Removing the hydroxyl group on Y300beta does not significantly alter the thermodynamics of the conformational transition, but shifts the location of the intermediate farther away from the nucleophile by 0.5 A, which suggests that Y300beta facilitate the reaction by stabilizing the chemical step. Our results also showed an increased transition barrier height for CVLM (1.5 kcal/mol higher than that of CVIM). Although qualitatively consistent with the findings from the recent kinetic isotope experiments by Fierke and co-workers, the magnitude is not large enough to affect the rate-limiting step.     

Rate-limiting steps and role of active site Lys443 in the mechanism of carbapenam synthetase

Carbapenam synthetase (hereafter named CPS) catalyzes the formation of the beta-lactam ring in the biosynthetic pathway to (5R)-carbapen-2-em-3-carboxylate, the simplest of the carbapenem antibiotics. Kinetic studies showed remarkable tolerance to substrate stereochemistry in the turnover rate but did not distinguish between chemistry and a nonchemical step such as product release or conformational change as being rate-determining. Also, X-ray structural studies and modest sequence homology to beta-lactam synthetase, an enzyme that catalyzes the formation of a monocyclic beta-lactam ring in a similar ATP/Mg2+-dependent reaction, implicate K443 as an essential residue for substrate binding and intermediate stabilization. In these experiments, we use pH-rate profiles, deuterium solvent isotope effects, and solvent viscosity measurements to examine the rate-limiting step in this complex overall process of substrate adenylation and intramolecular ring formation. Mutagenesis and chemical rescue demonstrate that K443 is the general acid visible in the pH-rate profile of the wild-type CPS-catalyzed reaction. On the basis of these results, we propose a mechanism in which the rate-limiting step is beta-lactam ring formation coupled to a protein conformational change and underscore the role of K443 throughout the reaction.     

Cyclic peptides — Small and big and their conformational aspects

Cyclic peptides form an interesting class of compounds for study by conformational analysis, by virtue of their unique conformational features and biological properties. The small cyclic peptides having 3-6 peptide units in their ring, show a variety of conformational characteristics such as occurrence ofcis peptide units, flexibility of peptide dimension and variety in hydrogen bonding. The different possible conformations of cyclic tri- and hexa-peptides are given and certain specific conformational features are discussed for cyclic tetra and pentapeptides. For higher cyclic peptides, the hydrogen bonding requirement for stability of the backbone of the ring, is seen to be kept to a minimum. These various features and their significance are examined and discussed in the light of energy minimization studies and analysis of available experimental data.     

Kinetics of inactivation of green crab (Scylla Serrata) alkaline phosphatase during removal of zinc ions by ethylenediaminetetraacetic acid disodium

Green crab (Scylla Serrata) alkaline phosphatase (EC 3.1.3.1.) is a metalloenzyme, the each active site in which contains a tight cluster of two zinc ions and one magnesium ion. The kinetic theory of the substrate reaction during irreversible inhibition of enzyme activity previously described by Tsou has been applied to a study on the kinetics of the course of inactivation of the enzyme by ethylenediaminetetraacetic acid disodium (EDTA). The kinetics of the substrate reaction with different concentrations of the substrate p-nitrophenyl phosphate (PNPP) and inactivator EDTA suggested a complexing mechanism for inactivation by, and substrate competition with, EDTA at the active site. The inactivation kinetics are single phasic, showing the initial formation of an enzyme-EDTA complex is a relatively rapid reaction, followed a slow inactivation step that probably involves a conformational change of the enzyme. Zinc ions are finally removed from the enzyme. The presence of metal ions apparently stabilizes an active-site conformation required for enzyme activity.     

Anomeric specificity of D-xylose isomerase.

Crystal structures of complexes of D-xylose isomerase with deoxysugars have been determined. Deoxynojirimycin is a structural analogue of alpha-pyranose and mimics the binding of these aldose substrates. The structure of this complex supports the hypothesis that an imidazole group catalyzes ring opening of the pyranose. The steric restrictions in the active site of the enzyme prevent a beta-pyranose from binding in the same way. For the reverse reaction with ketoses, the anomeric specificity is less certain. Dideoxyimino-D-glucitol is a structural analogue of the ketose alpha-D-furanose. The binding of the inhibitor dideoxyimino-D-glucitol to the crystals of the enzyme does not mimic the binding of the reactive alpha-D-fructofuranose. Superposition of the nonphysiological substrate alpha-D-fructofuranose onto the atomic positions of dideoxyimino-D-glucitol is not possible due to the steric restrictions of the active site. However, by utilizing the approximate 2-fold symmetry of the sugar, a stereochemically sensible model is produced which is consistent with other data. In addition to reaction with alpha-D-furanose, the enzyme probably reacts with open ring keto sugars which are present at significant concentrations. Other sugars which resemble furanoses either do not inhibit significantly or are not observed in the crystals bound in a single conformation.     

Molecular mechanisms of sugar transport across mammalian and microbial cell membranes

Recent DNA cloning studies have revealed the existence of a large family of homologous sugar transporters in both prokaryotic and eukaryotic organisms. The family includes passive transporters typical of mammalian tissues and active, H(+)-linked sugar transporters from bacteria. Each of these transporters characteristically contains two groups of six putative membrane-spanning alpha-helices separated by a large, hydrophilic, cytoplasmic region. Both the N-terminal and C-terminal regions of the sequence are also predicted to be cytoplasmic. Biophysical and other studies on the human erythrocyte glucose transporter, the only member of the family so far isolated in functional form, suggest that the membrane-spanning alpha-helices associate to form a hydrophilic channel or a substrate-binding cleft extending across the membrane. It is likely that the mechanism of substrate translocation involves alternate exposure of the substrate-binding site to each face of the membrane via a conformational change. Studies in progress on the erythrocyte transporter are beginning to identify regions of the protein involved in substrate binding and the conformational change, and should throw light on the mechanism of sugar translocation in the sugar transporter family as a whole.     

Stepwise analyses of metal ions in RNase H catalysis from substrate destabilization to product release

In two-metal catalysis, metal ion A has been proposed to activate the nucleophile and metal ion B to stabilize the transition state. We recently reported crystal structures of RNase H-RNA/DNA substrate complexes obtained at 1.5-2.2 Angstroms. We have now determined and report here structures of reaction intermediate and product complexes of RNase H at 1.65-1.85 Angstroms. The movement of the two metal ions suggests how they may facilitate RNA hydrolysis during the catalytic process. Firstly, metal ion A may assist nucleophilic attack by moving towards metal ion B and bringing the nucleophile close to the scissile phosphate. Secondly, metal ion B transforms from an irregular coordination in the substrate complex to a more regular geometry in the product complex. The exquisite sensitivity of Mg(2+) to the coordination environment likely destabilizes the enzyme-substrate complex and reduces the energy barrier to form product. Lastly, product release probably requires dissociation of metal ion A, which is inhibited by either high concentrations of divalent cations or mutation of an assisting protein residue.     

The crystal structure of rabbit phosphoglucose isomerase complexed with D-sorbitol-6-phosphate, an analog of the open chain form of D-glucose-6-phosphate

Phosphoglucose isomerase (PGI) catalyzes the isomerization of D-glucose-6-phosphate (G6P) and D-fructose-6-phosphate (F6P) in glycolysis and gluconeogenesis. Analysis of previously reported X-ray crystal structures of PGI without ligand, with the cyclic form of F6P, or with inhibitors that mimic the cis-enediol intermediate led to proposed mechanisms for the ring opening and isomerization steps in the multistep catalytic mechanism. To help complete our model of the overall mechanism, information is needed about the state of PGI between the ring opening and isomerization steps, in other words, a structure of the enzyme complexed with the open form of a substrate or an analog. Here, we report the crystal structure of rabbit PGI complexed with D-sorbitol-6-phosphate (S6P), an analog of the open chain form of G6P, at 2.0 A resolution. As was seen in the PGI/F6P structure, a helix containing amino acid residues 512-520 is found in the "out" position, which provides sufficient space in the active site for a substrate in its cyclic form and which is probably the location of that helix just after ring opening (or just before ring closure). However, the S6P ligand is in an extended conformation, as was seen previously with ligands that mimic the cis-enediol intermediate. The extended conformation enables the ligand to interact with Glu357, which transfers a proton during the isomerization step. The PGI/S6P structure represents the conformation of the enzyme and substrate between the ring opening (or ring closing) step and the isomerization step and helps to complete the model for PGI's catalytic mechanism.     

Chelatases: distort to select?

Chelatases catalyze the insertion of a specific metal ion into porphyrins, a key step in the synthesis of metalated tetrapyrroles that are essential for many cellular processes. Despite apparent common structural features among chelatases, no general reaction mechanism accounting for metal ion specificity has been established. We propose that chelatase-induced distortion of the porphyrin substrate not only enhances the reaction rate by decreasing the activation energy of the reaction but also modulates which divalent metal ion is incorporated into the porphyrin ring. We evaluate the recently recognized interaction between ferrochelatase and frataxin as a way to regulate iron delivery to ferrochelatase, and thus iron and heme metabolism. We postulate that the ferrochelatase-frataxin interaction controls the type of metal ion that is delivered to ferrochelatase.     

Chaperone activity of a chimeric GroEL protein that can exist in a single or double ring form.

The molecular chaperone GroEL is a protein complex consisting of two rings each of seven identical subunits. It is thought to act by providing a cavity in which a protein substrate can fold into a form that has no propensity to aggregate. Substrate proteins are sequestered in the cavity while they fold, and prevented from diffusion out of the cavity by the action of the GroES complex, that caps the open end of the cavity. A key step in the mechanism of action of GroEL is the transmission of a conformational change between the two rings, induced by the binding of nucleotides to the GroEL ring opposite to the one containing the polypeptide substrate. This conformational change then leads to the discharge of GroES from GroEL, enabling polypeptide release. Single ring forms of GroEL are thus predicted to be unable to chaperone the folding of GroES-dependent substrates efficiently, since they are unable to discharge the bound GroES and unable to release folded protein. We describe here a detailed functional analysis of a chimeric GroEL protein, which we show to exist in solution in equilibrium between single and double ring forms. We demonstrate that whereas the double ring form of the GroEL chimera functions effectively in refolding of a GroES-dependent substrate, the single ring form does not. The single ring form of the chimera, however, is able to chaperone the folding of a substrate that does not require GroES for its efficient folding. We further demonstrate that the double ring structure of GroEL is likely to be required for its activity in vivo.     

Agonist-induced isomerization in a glutamate receptor ligand-binding domain. A kinetic and mutagenetic analysis

Agonist binding to glutamate receptor ion channels occurs within an extracellular domain (S1S2) that retains ligand affinity when expressed separately. S1S2 is homologous to periplasmic binding proteins, and it has been proposed that a Venus flytrap-style cleft closure triggers opening of glutamate receptor ion channels. Here we compare the kinetics of S1S2-agonist binding to those of the periplasmic binding proteins and show that the reaction involves an initial rapid association, followed by slower conformational changes that stabilize the complex: "docking" followed by "locking." The motion detected here reflects the mechanism by which the energy of glutamate binding is converted into protein conformational changes within S1S2 alone. In the intact channel, these load-free conformational changes are harnessed and possibly modified as the agonist binding reaction is used to drive channel opening and subsequent desensitization. Using mutagenesis, key residues in each step were identified, and their roles were interpreted in light of a published S1S2 crystal structure. In contrast to the Venus flytrap proposal, which focuses on motion between the two lobes as the readout for agonist binding, we argue that smaller, localized conformational rearrangements allow agonists to bridge the cleft, consistent with published hydrodynamic measurements.     

Activation of the insulin receptor's kinase domain changes the rate-determining step of substrate phosphorylation

The insulin receptor and many other protein kinases are activated by relief of intrasteric inhibition that is regulated by reversible phosphorylation. The changes accompanying activation of the insulin receptor's kinase domain were analyzed using steady-state kinetics, viscometric analysis, and equilibrium binding measurements. Peptide phosphorylation catalyzed by the unphosphorylated basal-state kinase is limited by a slow rate of the chemical step, and the activated enzyme is limited by product release rates. Underlying these changes were a 36-fold increase in the rate constant for the chemical step of the enzyme-catalyzed reaction, a 5-fold increase in the affinity for MgATP, and an 8-fold increase in the affinity for peptide substrate. This results in binding of substrates that is 2.2 kcal/mol more favorable and a free energy barrier for transition state formation that is lowered by 2.1 kcal/mol in the activated enzyme. Therefore, the change in conformational free energy inherent in the protein after autophosphorylation [Bishop, S. M., Ross, J. B. A., and Kohanski, R. A. (1999) Biochemistry 38, 3079-3089] is equally distributed between formation of the substrate ternary complex and formation of the transition state complex.     

Dehydroquinate synthase: the use of substrate analogues to probe the late steps of the catalyzed reaction

The later steps of the proposed mechanistic pathway for the reaction catalyzed by dehydroquinate synthase have been probed by using three substrate analogues. Each of these analogues is structurally prohibited from undergoing the ring-opening reaction that necessarily precedes the carbon-carbon bond-forming step in the overall conversion of the substrate 3-deoxy-D-arabino-heptulosonate 7-phosphate (1) to dehydroquinate (2). Two of the analogues (the 2-deoxy cyclic compound 3 and the carbacyclic material 4) are locked into a cyclic form, mimicking the pyranose form of the substrate DAHP. The third analogue, 5, contains no carbonyl group at C-2 and may thus resemble the open-chain form of DAHP. Analogues 3 and 4 each bind to the enzyme and are competitive inhibitors having Ki values of 35 and 0.12 microM, respectively. More importantly, however, incubation of these analogues with the enzyme leads to the catalytic production of Pi along with the corresponding exomethylene compounds that are analogous to the enol ether IV postulated for the normal synthase reaction. In contrast to these results, the acyclic analogue 5 is neither a substrate nor an inhibitor of the enzyme. These data suggest that the enzyme recognizes and acts upon the alpha-pyranose form of the natural substrate. The ready release of the exomethylene products from the processing of analogues 3 and 4 is consistent with the suggestion of Bartlett and his group that the enzyme may release the enol ether intermediate IV into solution, where the ring opening and cyclization occur nonenzymically. The use of 3 stereospecifically labeled with deuterium at C-7 allows the sterochemical course of the beta-elimination of phosphate to be established. This step proceeds with syn stereochemistry, which fits the pattern of enzyme-catalyzed elimination from substrates where the proton is lost from a position alpha to a ketone, an aldehyde, or a thiolester. Since the overall stereochemical course of the transformation mediated by dehydroquinate synthase had been shown to be inversion, the present finding of a syn elimination suggests that the transition state for the subsequent intramolecular aldol reaction has a chairlike geometry.     

Molecular dynamics simulations of iron- and aluminum-loaded serum transferrin: protonation of tyr188 is necessary to prompt metal release

Serum transferrin (sTf) carries iron in blood serum and delivers it into cells by receptor-mediated endocytosis. The protein can also bind other metals, including aluminum. The crystal structures of the metal-free and metal-loaded protein indicate that the metal release process involves an opening of the protein. In this process, Lys206 and Lys296 lying in the proximity of each other form the dilysine pair or, so-called, dilysine trigger. It was suggested that the conformational change takes place due to variations of the protonation state of the dilysine trigger at the acidic endosomal pH. In 2003, Rinaldo and Field (Biophys. J. 85, 3485-3501) proposed that the dilysine trigger alone can not explain the opening and that the protonation of Tyr188 is required to prompt the conformational change. However, no evidence was supplied to support this hypothesis. Here, we present several 60 ns molecular dynamics simulations considering various protonation states to investigate the complexes formed by sTf with Fe(III) and Al(III). The calculations demonstrate that only in those systems where Tyr188 has been protonated does the protein undergo the conformational change and that the dilysine trigger alone does not lead to the opening. The simulations also indicate that the metal release process is a stepwise mechanism, where the hinge-bending motion is followed by the hinge-twisting step. Therefore, the study demonstrates for the first time that the protonation of Tyr188 is required for the release of metal from the metal loaded sTf and provides valuable information about the whole process.