Genetic mapping of ovary colour and quantitative trait loci for carotenoid content in the fruit of <Emphasis Type="Italic">Cucurbita maxima</Emphasis> Duchesne

The high content of carotenoids, sugars, dry matter, vitamins and minerals makes the fruit of winter squash (Cucurbita maxima Duchesne) a valuable fresh-market vegetable and an interesting material for the food industry. Due to their nutritional value, long shelf-life and health protective properties, winter squash fruits have gained increased interest from researchers in recent years. Despite these advantages, the genetic and genomic resources available for C. maxima are still limited. The aim of this study was to use the genetic mapping approach to map the ovary colour locus and to identify the quantitative trait loci (QTLs) for high carotenoid content and flesh colour. An F₆ recombinant inbred line (RIL) mapping population was developed and used for evaluations of ovary colour, carotenoid content and fruit flesh colour. SSR markers and DArTseq genotyping-by-sequencing were used to construct an advanced genetic map that consisted of 1824 molecular markers distributed across linkage groups corresponding to 20 chromosomes of C. maxima. Total map length was 2208 cM and the average distance between markers was 1.21 cM. The locus affecting ovary colour was mapped at the end of chromosome 14. The identified QTLs for carotenoid content in the fruit and fruit flesh colour shared locations on chromosomes 2, 4 and 14. QTLs on chromosomes 2 and 4 were the most meaningful. A correlation was clearly confirmed between fruit flesh colour as described by the chroma value and carotenoid content in the fruit. A high-density genetic map of C. maxima with mapped loci for important fruit quality traits is a valuable resource for winter squash improvement programmes.     

Mapping of QTLs for lycopene and other fruit traits in a Lycopersicon esculentum × L. pimpinellifolium cross and comparison of QTLs across tomato species

Quantitative trait loci (QTLs) for several fruit traits in tomato were mapped and characterized in a backcross population of an interspecific cross between Lycopersicon esculentum fresh-marker breeding line NC84173 and L. pimpinellifolium accession LA722. A molecular linkage map of this cross that was previously constructed based on 119 BC1 individuals and 151 RFLP markers was used for the QTL mapping. The parental lines and 119 BC1S1 families (self-pollinated progeny of BC1 individuals) were grown under field conditions at two locations, Rock Spring, PA, and Davis, CA, and fruits were scored for weight (FW), polar (PD) and equatorial diameters (ED), shape (FS), total soluble solids content (SSC), pH and lycopene content (LYC). For each trait, between 4 and 10 QTLs were identified with individual effects ranging between 4.4% and 32.9% and multilocus QTL effects ranging between 39% and 75% of the total phenotypic variation. Most QTL effects were predictable from the parental phenotypes, and several QTLs were identified that affected more than one trait. A few pairwise epistatic interactions were detected between QTL-linked and QTL-unlinked markers. Despite great differences between PA and CA growing conditions, the majority of FW QTLs (78%) and SSC QTLs (75%) in the two locations shared similar genomic positions. Almost all of the QTLs that were identified in the present study for FW and SSC were previously identified in six other studies that used different interspecific crosses of tomato; this indicates conservation of QTLs for fruit traits across tomato species. Altogether, the seven studies identified at least 28 QTLs for FW and 32 QTLs for SSC on the 12 tomato chromosomes. However, for each trait a few major QTLs were commonly identified in 4 or more studies; such ‘popular’ QTLs should be of considerable interest for breeding purposes as well as basic research towards cloning of QTLs. Notably, a majority of QTLs for increased SSC also contributed to decreased fruit size. Therefore, to significantly increase SSC of the cultivated tomato, some compromise in fruit size may be unavoidable. This revised version was published online in June 2006 with corrections to the Cover Date.     

Mapping of quantitative trait loci for flesh colour and growth traits in Atlantic salmon (Salmo salar)

Background

Flesh colour and growth related traits in salmonids are both commercially important and of great interest from a physiological and evolutionary perspective. The aim of this study was to identify quantitative trait loci (QTL) affecting flesh colour and growth related traits in an F2 population derived from an isolated, landlocked wild population in Norway (Byglands Bleke) and a commercial production population.

Methods

One hundred and twenty-eight informative microsatellite loci distributed across all 29 linkage groups in Atlantic salmon were genotyped in individuals from four F2 families that were selected from the ends of the flesh colour distribution. Genotyping of 23 additional loci and two additional families was performed on a number of linkage groups harbouring putative QTL. QTL analysis was performed using a line-cross model assuming fixation of alternate QTL alleles and a half-sib model with no assumptions about the number and frequency of QTL alleles in the founder populations.

Results

A moderate to strong phenotypic correlation was found between colour, length and weight traits. In total, 13 genome-wide significant QTL were detected for all traits using the line-cross model, including three genome-wide significant QTL for flesh colour (Chr 6, Chr 26 and Chr 4). In addition, 32 suggestive QTL were detected (chromosome-wide P < 0.05). Using the half-sib model, six genome-wide significant QTL were detected for all traits, including two for flesh colour (Chr 26 and Chr 4) and 41 suggestive QTL were detected (chromosome-wide P < 0.05). Based on the half-sib analysis, these two genome-wide significant QTL for flesh colour explained 24% of the phenotypic variance for this trait.

Conclusions

A large number of significant and suggestive QTL for flesh colour and growth traits were found in an F2 population of Atlantic salmon. Chr 26 and Chr 4 presented the strongest evidence for significant QTL affecting flesh colour, while Chr 10, Chr 5, and Chr 4 presented the strongest evidence for significant QTL affecting growth traits (length and weight). These QTL could be strong candidates for use in marker-assisted selection and provide a starting point for further characterisation of the genetic components underlying flesh colour and growth.     

Mapping of chromosome loci determined manifestation of morphological and biochemical traits of quality in <Emphasis Type="Italic">Brassica rapa</Emphasis> L. crops

Mapping chromosomal loci responsible for seven morphological and five biochemical traits of quality in populations of doubled haploid lines of leafy, rooted, and oilseed crops of Brassica rapa L. species was performed for the first time. In total, 140 quantitative trait loci (QTLs) were mapped determining manifestation of the studied morphological and biochemical economically important traits of quality under field and greenhouse conditions; the control of the same traits under different growth conditions or simultaneous control of several traits by one locus were noted. Molecular markers genetically linked with the selected QTLs were detected. The block genomic structure of the genetic components (chromosomal loci and linkage groups) determining manifestation of morphological and biochemical traits of quality that make B. rapa plants nutritionally valuable is discussed for the first time. The conclusion is drawn that the revealed QTLs and identified molecular markers may be of interest for the forthcoming study of genetic control by them of economically important characters and for the marker assisted selection in B. rapa.     

Genetic mapping of yield traits using RIL population derived from Fuchuan Dahuasheng and ICG6375 of peanut (<Emphasis Type="Italic">Arachis hypogaea</Emphasis> L.)

The genetic architecture determinants of yield traits in peanut (Arachis hypogaea L.) are poorly understood. In the present study, an effort was made to map quantitative trait loci (QTLs) for yield traits using recombinant inbred lines (RIL). A genetic linkage map was constructed containing 609 loci, covering a total of 1557.48 cM with an average distance of 2.56 cM between adjacent markers. The present map exhibited good collinearity with the physical map of diploid species of Arachis. Ninety-two repeatable QTLs were identified for 11 traits including height of main stem, total branching number, and nine pod- and seed-related traits. Of the 92 QTLs, 15 QTLs were expressed across three environments and 65 QTLs were newly identified. Twelve QTLs for the height of main stem and the pod- and seed-related traits explaining more than 10 % of phenotypic variation showed a great potential for marker-assisted selection in improving these traits. 相似文献   

Construction of the First High-Density Genetic Linkage Map and Analysis of Quantitative Trait Loci for Growth-Related Traits in <Emphasis Type="Italic">Sinonovacula constricta</Emphasis>

The razor clam (Sinonovacula constricta) is an important aquaculture species, for which a high-density genetic linkage map would play an important role in marker-assisted selection (MAS). In this study, we constructed a high-density genetic map and detected quantitative trait loci (QTLs) for Sinonovacula constricta with an F₁ cross population by using the specific locus amplified fragment sequencing (SLAF-seq) method. A total of 315,553 SLAF markers out of 467.71 Mreads were developed. The final linkage map was composed of 7516 SLAFs (156.60-fold in the parents and 20.80-fold in each F₁ population on average). The total distance of the linkage map was 2383.85 cM, covering 19 linkage groups with an average inter-marker distance of 0.32 cM. The proportion of gaps less than 5.0 cM was on average 96.90%. A total of 16 suggestive QTLs for five growth-related traits (five QTLs for shell height, six QTLs for shell length, three QTLs for shell width, one QTL for total body weight, and one QTL for soft body weight) were identified. These QTLs were distributed on five linkage groups, and the regions showed overlapping on LG9 and LG13. In conclusion, the high-density genetic map and QTLs for S. constricta provide a valuable genetic resource and a basis for MAS.     

Identification of quantitative trait loci for plant height, lodging, and maturity in a soybean population segregating for growth habit

The use of molecular markers to identify quantitative trait loci (QTLs) has the potential to enhance the efficiency of trait selection in plant breeding. The purpose of the present study was to identify additional QTLs for plant height, lodging, and maturity in a soybean, Glycine max (L.) Merr., population segregating for growth habit. In this study, 153 restriction fragment length polymorphisms (RFLP) and one morphological marker (Dt1) were used to identify QTLs associated with plant height, lodging, and maturity in 111 F₂-derived lines from a cross of PI 97100 and Coker 237. The F₂-derived lines and two parents were grown at Athens, Ga., and Blackville, S.C., in 1994 and evaluated for phenotypic traits. The genetic linkage map of these 143 loci covered about 1600 cM and converged into 23 linkage groups. Eleven markers remained unlinked. Using interval-mapping analysis for linked markers and single-factor analysis of variance (ANOVA), loci were tested for association with phenotypic data taken at each location as well as mean values over the two locations. In the combined analysis over locations, the major locus associated with plant height was identified as Dt1 on linkage group (LG) L. The Dt1 locus was also associated with lodging. This locus explained 67.7% of the total variation for plant height, and 56.4% for lodging. In addition, two QTLs for plant height (K007 on LG H and A516b on LG N) and one QTL for lodging (cr517 on LG J) were identified. For maturity, two independent QTLs were identified in intervals between R051 and N100, and between B032 and CpTI, on LG K. These QTLs explained 31.2% and 26.2% of the total variation for maturity, respectively. The same QTLs were identified for all traits at each location. This consistency of QTLs may be related to a few QTLs with large effects conditioning plant height, lodging, and maturity in this population.     

Mapping QTLs for morpho-agronomic traits in proso millet (<Emphasis Type="Italic">Panicum miliaceum</Emphasis> L.)

Proso millet (Panicum miliaceum L.) is the cereal crop with the low water requirement and increasingly being used for human consumption. It is the most common rotational crop within wheat-based dryland production systems in the semiarid High Plains of the USA. However, there is no published genetic map for this species, which prevents the identification of quantitative trait loci (QTL). The objectives of the present study were (1) construction of a genetic linkage map and (2) identification of DNA markers linked to QTLs for morpho-agronomic traits. A total of 93 recombinant inbred lines derived from a single F₁ (“Huntsman” × “Minsum”) were genotyped with GBS-SNP markers and phenotyped for nine morpho-agronomic traits in the field during 2013 and 2014 at Scottsbluff and Sidney, NE. IciMapping v.4.0.6.0 was used for constructing a genetic linkage map and mapping QTL. The RILs exhibited significant variation for a wide range of traits, and several traits showed evidence of genotype × environment interactions. A total of 833 GBS-SNP markers formed 18 major and 84 minor linkage groups, whereas 519 markers remained ungrouped. A total of 117 GBS-SNP markers were distributed on the 18 major linkage groups spanning a genome length of 2137 cM of proso millet with an average distance of 18 cM between markers. The length and number of markers in each of the 18 major linkage groups ranged from 54.6 to 236 cM and 4 to 12, respectively. A total of 18 QTLs for eight morpho-agronomic traits were detected on 14 linkage groups, each of which explained 13.2–34.7 % phenotypic variance. DNA markers flanking the QTLs were identified, which will aid in marker-assisted selection of these traits. To our knowledge, this is the first genetic linkage map and QTL mapping in proso millet, which will support further genetic analysis and genomics-assisted genetic improvement of this crop.     

Theobroma cacao L.: a genetic linkage map and quantitative trait loci analysis

A genetic linkage map of Theobroma cacao (cocoa) has been constructed from 131 backcross trees derived from a cross between a single tree of the variety Catongo and an F1 tree from the cross of Catongo by Pound 12. The map comprises 138 markers: 104 RAPD loci, 32 RFLP loci and two morphologic loci. Ten linkage groups were found which cover 1068 centimorgans (cM). Only six (4%) molecular-marker loci show a significant deviation from the expected 11 segregation ratio.The average distance between two adjacent markers is 8.3 cM. The final genome-size estimates based on two-point linkage data ranged from 1078 to 1112 cM for the cocoa genome. This backcross progeny segregates for two apparently single gene loci controlling (1) anthocyanidin synthesis (Anth) in seeds, leaves and flowers and (2) self-compatibility (Autoc). The Anth locus was found to be 25 cM from Autoc and two molecular markers co-segregate with Anth. The genetic linkage map was used to localize QTLs for early flowering, trunk diameter, jorquette height and ovule number in the BC₁ generation using both single-point ANOVA and interval mapping. A minimum number of 2–4 QTLs (P<0.01) involved in the genetic expression of the traits studied was detected. Coincident map locations of a QTL for jorquette height and trunk diameter suggests the possibility of pleiotropic effects in cocoa for these traits. The combined estimated effects of the different mapped QTLs explained between 11.2% and 25.8% of the phenotypic variance observed in the BC₁ population.     

Quantitative trait locus mapping under irrigated and drought treatments based on a novel genetic linkage map in mungbean (<Emphasis Type="Italic">Vigna radiata</Emphasis> L.)

Key message

A novel genetic linkage map was constructed using SSR markers and stable QTLs were identified for six drought tolerance related-traits using single-environment analysis under irrigation and drought treatments.

Abstract

Mungbean (Vigna radiata L.) is one of the most important leguminous food crops. However, mungbean production is seriously constrained by drought. Isolation of drought-responsive genetic elements and marker-assisted selection breeding will benefit from the detection of quantitative trait locus (QTLs) for traits related to drought tolerance. In this study, we developed a full-coverage genetic linkage map based on simple sequence repeat (SSR) markers using a recombinant inbred line (RIL) population derived from an intra-specific cross between two drought-resistant varieties. This novel map was anchored with 313 markers. The total map length was 1010.18 cM across 11 linkage groups, covering the entire genome of mungbean with a saturation of one marker every 3.23 cM. We subsequently detected 58 QTLs for plant height (PH), maximum leaf area (MLA), biomass (BM), relative water content, days to first flowering, and seed yield (Yield) and 5 for the drought tolerance index of 3 traits in irrigated and drought environments at 2 locations. Thirty-eight of these QTLs were consistently detected two or more times at similar linkage positions. Notably, qPH5A and qMLA2A were consistently identified in marker intervals from GMES5773 to MUS128 in LG05 and from Mchr11-34 to the HAAS_VR_1812 region in LG02 in four environments, contributing 6.40–20.06% and 6.97–7.94% of the observed phenotypic variation, respectively. None of these QTLs shared loci with previously identified drought-related loci from mungbean. The results of these analyses might facilitate the isolation of drought-related genes and help to clarify the mechanism of drought tolerance in mungbean.

     

QTL Mapping of Wood FT-IR Chemotypes Shows Promise for Improving Biofuel Potential in Short Rotation Coppice Willow (<Emphasis Type="Italic">Salix</Emphasis> spp.)

An increasing interest to convert lignocellulosic biomass into biofuels has highlighted the potential of using willows for this purpose, due to its fast growth in short rotation coppice systems. Here, we use a mapping population of 463 individuals of a cross between Salix viminalis and S. viminalis × S. schwerinii to investigate the genetic background of different wood chemical traits, information of importance for breeding towards different uses of wood. Furthermore, using a subset of the mapping population, the correlation between biogas production and chemical traits was investigated. The phenotyping of wood was carried by Furrier-transformed-Infrared spectrometry (FT-IR) and water content analysis. Quantitative trait loci (QTLs) analysis was used to identify regions in the genome of importance for the phenotypic variation of these chemical traits. We found 27 QTLs for various traits. On linkage group (LG) VI-1, QTLs for signals assigned to G-lignin, lignin, and the S/G ratio were collocated and on LG XIV we found a cluster of QTLs representing signals assigned to lignin, cellulose, hemicellulose, and water. The QTLs explained from 3.4 to 6.9% of the phenotypic variation indicating a quantitative genetic background where many genes influence the traits. For the biogas production, a positive and negative correlation was seen with the signals assigned to acetyl and lignin, respectively. This study represents a first step in the understanding of the genetic background of wood chemical traits for willows, information needed for complementary studies, mapping of important genes, and for breeding of varieties for biofuel production purposes.     

QTL analysis of root traits as related to phosphorus efficiency in soybean

Background and Aims

Low phosphorus (P) availability is a major constraint to soybean growth and production, especially in tropical and subtropical areas. Root traits have been shown to play critical roles in P efficiency in crops. Identification of the quantitative trait loci (QTLs) conferring superior root systems could significantly enhance genetic improvement in soybean P efficiency.

Methods

A population of 106 F₉ recombinant inbred lines (RILs) derived from a cross between BD2 and BX10, which contrast in both P efficiency and root architecture, was used for mapping and QTL analysis. Twelve traits were examined in acid soils. A linkage map was constructed using 296 simple sequence repeat (SSR) markers with the Kosambi function, and the QTLs associated with these traits were detected by composite interval mapping and multiple-QTL mapping.

Key Results

The first soybean genetic map based on field data from parental genotypes contrasting both in P efficiency and root architecture was constructed. Thirty-one putative QTLs were detected on five linkage groups, with corresponding contribution ratios of 9·1–31·1 %. Thirteen putative QTLs were found for root traits, five for P content, five for biomass and five for yield traits. Three clusters of QTLs associated with the traits for root and P efficiency at low P were located on the B1 linkage group close to SSR markers Satt519 and Satt519-Sat_128, and on the D2 group close to Satt458; and one cluster was on the B1 linkage group close to Satt519 at high P.

Conclusions

Most root traits in soybean were conditioned by more than two minor QTLs. The region closer to Satt519 on the B1 linkage group might have great potential for future genetic improvement for soybean P efficiency through root selection.     

Genetic mapping of QTLs controlling horticultural traits in diploid roses

A segregating progeny set of 96 F₁ diploid hybrids (2n=2x=14) between Blush Noisette (D10), one of the first seedlings from the original Champneys Pink Cluster, and Rosa wichurana (E15), was used to construct a genetic linkage map of the rose genome following a pseudo-testcross mapping strategy. A total of 133 markers (130 RAPD, one morphological and two microsatellites) were located on the 14 linkage groups (LGs) of the D10 and E15 maps, covering total map lengths of 388 and 260 cM, respectively. Due to the presence of common biparental markers the homology of four LGs between parental maps (D10-1/E15-1 to D10-4/E15-4) could be inferred. Four horticulturally interesting quantitative traits, flower size (FS), days to flowering (DF), leaf size (LS), and resistance to powdery mildew (PM) were analysed in the progeny in order to map quantitative trait loci (QTLs) controlling these traits. A total of 13 putative QTLs (LOD>3.0) were identified, four for FS, two for flowering time, five for LS, and two for resistance to PM. Possible homologies between QTLs detected in the D10 and E15 maps could be established between Fs1 and Fs3, Fs2 and Fs4, and Ls1 and Ls3. Screening for pairwise epistatic interactions between loci revealed additional, epistatic QTLs (EQTLs) for DF and LS that were not detected in the original QTL analysis. The genetic maps developed in this study will be useful to add new markers and locate genes for important traits in the genus providing a practical resource for marker-assisted selection programs in roses.     

Genetic mapping and QTL analysis of agronomic traits in Indian <Emphasis Type="Italic">Mucuna pruriens</Emphasis> using an intraspecific F<Subscript>2</Subscript> population

Mucuna pruriens is a well-recognized agricultural and horticultural crop with important medicinal use. However, antinutritional factors in seed and adverse morphological characters have negatively affected its cultivation. To elucidate the genetic control of agronomic traits, an intraspecific genetic linkage map of Indian M. pruriens has been developed based on amplified fragment length polymorphism (AFLP) markers using 200 F ₂ progenies derived from a cross between wild and cultivated genotypes. The resulting linkage map comprised 129 AFLP markers dispersed over 13 linkage groups spanning a total distance of 618.88 cM with an average marker interval of 4.79 cM. For the first time, three QTLs explaining about 6.05–14.77% of the corresponding total phenotypic variation for three quantitative (seed) traits and, eight QTLs explaining about 25.96% of the corresponding total phenotypic variation for three qualitative traits have been detected on four linkage groups. The map presented here will pave a way for mapping of genes/QTLs for the important agronomic and horticultural traits contrasting between the parents used in this study.     

QTL mapping of flag leaf-related traits in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Key message

QTL controlling flag leaf length, flag leaf width, flag leaf area and flag leaf angle were mapped in wheat.

Abstract

This study aimed to advance our understanding of the genetic mechanisms underlying morphological traits of the flag leaves of wheat (Triticum aestivum L.). A recombinant inbred line (RIL) population derived from ND3331 and the Tibetan semi-wild wheat Zang1817 was used to identify quantitative trait loci (QTLs) controlling flag leaf length (FLL), flag leaf width (FLW), flag leaf area (FLA), and flag leaf angle (FLANG). Using an available simple sequence repeat genetic linkage map, 23 putative QTLs for FLL, FLW, FLA, and FLANG were detected on chromosomes 1B, 2B, 3A, 3D, 4B, 5A, 6B, 7B, and 7D. Individual QTL explained 4.3–68.52% of the phenotypic variance in different environments. Four QTLs for FLL, two for FLW, four for FLA, and five for FLANG were detected in at least two environments. Positive alleles of 17 QTLs for flag leaf-related traits originated from ND3331 and 6 originated from Zang1817. QTLs with pleiotropic effects or multiple linked QTL were also identified on chromosomes 1B, 4B, and 5A; these are potential target regions for fine-mapping and marker-assisted selection in wheat breeding programs.

     

SSR-based genetic linkage map construction in pistachio using an interspecific F<Subscript>1</Subscript> population and QTL analysis for leaf and shoot traits

Pistachio is one of the most commercially important nut trees in the world. To characterize the genetic controls of horticultural traits and facilitate marker-assisted breeding in pistachio, we constructed an SSR-based linkage map using an interspecific F₁ population derived from a cross between the cultivar “Siirt” (Pistacia vera L.) and the monoecious Pa-18 genotype of Pistacia atlantica Desf. This population was also used for the first QTL analysis in pistachio on leaf and shoot characters. In total, 1312 SSR primers were screened, and 388 loci were successfully integrated into parental linkage maps. The Siirt maternal map contained 306 markers, while the “Pa-18” paternal map included 285 markers along the 15 linkage groups. The Siirt map spanned 1410.4 cM, with an average marker distance of 4.6 cM; the Pa-18 map covered 1362.5 cM with an average marker distance of 4.8 cM. Phenotypic data were collected during the growing seasons of 2015 and 2016 for four traits: leaf length (LL), leaf width (LW), leaf length/leaf width ratio (LWR), number of leaflet pairs (NLL), and young shoot color (YSC). A total of 17 QTLs were identified in the parental maps. Four QTLs for LL and LW were located on LG2 and LG4, while four QTLs for LWR ratio on LG13 and LG14, two QTLs for NLL and two QTLs for YSC were on LG7 and LG9, respectively, with similar positions in both parental maps. The SSR markers, linkage maps, and QTLs reported here will provide a valuable resource for future molecular and genetic studies in pistachio.     

On the genetic control of heterosis for fruit shape in melon (Cucumis melo L.)

The objective of the present work is to study the genetic basis of heterosis for fruit shape (FS) in melon observed in a cross between the Spanish cultivar "Piel de Sapo" (PS) and the Korean accession PI 161375 (Songwang Charmi [SC]) using a set of near-isogenic lines (NILs) with contrasting phenotypes for FS, each carrying a single chromosomal introgression from SC within the genetic background of PS. We investigated the FS of homozygous NILs, hybrids NIL x PS, and all 2-way crosses between NILs to test the main heterosis hypotheses (dominance, overdominance, and epistatic interactions). Gene action of alleles of quantitative trait loci inducing fruit enlargement was dominance, whereas those inducing rounder fruit were additive or recessive. Only minor epistatic interactions were found. Therefore, the most plausible explanation for FS heterosis in this cross is in agreement with the dominance complementation hypothesis. Over 70% of the hybrid heterosis could be achieved by combining just 2 loci, indicating that the genetic control of FS heterosis in this cross is relatively simple. FS is proposed as a reproductive trait in melon because of the high correlation to the number of seeds produced along the fruit longitudinal axis.     

A RAPD,AFLP and SSR linkage map,and QTL analysis in European beech (<Emphasis Type="Italic">Fagus sylvatica</Emphasis> L.)

The genetic linkage map of European beech (Fagus sylvatica L.) that we report here is the first to our knowledge. Based on a total of 312 markers (28 RAPDs, 274 AFLPs, 10 SSRs) scored in 143 individuals from a F₁ full-sib family. Two maps (one for each parent) were constructed according to a two-way pseudo-testcross mapping strategy. In the male map 119 markers could be clustered in 11 major groups (971 cM), while in the female map 132 markers were distributed in 12 major linkage groups (844 cM). In addition, four and one minor linkage groups (doublets and triplets) were obtained for the male and female map respectively. The two maps cover about 82% and 78% of the genome. Based on the position of 15 AFLP and 2 SSR loci segregating in both parents, seven homologous linkage groups could be identified. In the same pedigree we investigated the association with genetic markers of several quantitative traits: leaf area, leaf number and shape in 2 different years, specific leaf area, leaf carbon-isotope discrimination and tree height. A composite interval-mapping approach was used to estimate the number of QTLs, the amount of variation explained by each of them, and their position on the genetic linkage maps. Eight QTLs associated with leaf traits were found that explained between 15% and 35% of the trait variation, five on the female map and three on the male map.Communicated by D. B. Neale     

Mapping the genome of rapeseed (Brassica napus L.). I. Construction of an RFLP linkage map and localization of QTLs for seed glucosinolate content

A linkage map of the rapeseed genome comprising 204 RFLP markers, 2 RAPD markers, and 1 phenotypic marker was constructed using a F₁ derived doubled haploid population obtained from a cross between the winter rapeseed varieties Mansholt's Hamburger Raps and Samourai. The mapped markers were distributed on 19 linkage groups covering 1441 cM. About 43% of these markers proved to be of dominant nature; 36% of the mapped marker loci were duplicated, and conserved linkage arrangements indicated duplicated regions in the rapeseed genome. Deviation from Mendelian segregation ratios was observed for 27.8% of the markers. Most of these markers were clustered in 7 large blocks on 7 linkage groups, indicating an equal number of effective factors responsible for the skewed segregations. Using cDNA probes for the genes of acyl-carrier-protein (ACP) and -ketoacyl-ACP-synthase I (KASI) we were able to map three and two loci, respectively, for these genes. The linkage map was used to localize QTLs for seed glucosinolate content by interval mapping. Four QTLs could be mapped on four linkage groups, giving a minimum number of factors involved in the genetic control of this trait. The estimated effects of the mapped QTLs explain about 74% of the difference between both parental lines and about 61.7 % of the phenotypic variance observed in the doubled haploid mapping population.     

Integrated analysis of leaf morphological and color traits in different populations of Chinese cabbage (<Emphasis Type="Italic">Brassica rapa</Emphasis> ssp. <Emphasis Type="Italic">pekinensis</Emphasis>)

Key message

QTLs and candidate gene markers associated with leaf morphological and color traits were identified in two immortalized populations of Brassica rapa, which will provide genetic information for marker-assisted breeding.

Abstract

Brassica rapa is an important leafy vegetable consumed worldwide and morphology is a key character for its breeding. To enhance genetic control, quantitative trait loci (QTLs) for leaf color and plant architecture were identified using two immortalized populations with replications of 2 and 4 years. Overall, 158 and 80 QTLs associated with 23 and 14 traits were detected in the DH and RIL populations, respectively. Among them, 23 common robust-QTLs belonging to 12 traits were detected in common loci over the replications. Through comparative analysis, five crucifer genetic blocks corresponding to morphology trait (R, J&U, F and E) and color trait (F, E) were identified in three major linkage groups (A2, A3 and A7). These might be key conserved genomic regions involved with the respective traits. Through synteny analysis with Arabidopsis, 64 candidate genes involved in chlorophyll biosynthesis, cell proliferation and elongation were co-localized within QTL intervals. Among them, SCO3, ABI3, FLU, HCF153, HEMB1, CAB3 were mapped within QTLs for leaf color; and CYCD3;1, CYCB2;4, AN3, ULT1 and ANT were co-localized in QTL regions for leaf size. These robust QTLs and their candidate genes provide useful information for further research into leaf architecture with crop breeding.