Stabilizing nonpolar/polar side-chain interactions in the alpha-helix.

A simplistic, yet often used, view of protein stability is that amino acids attract other amino acids with similar polarity, whereas nonpolar and polar side chains repel. Here we show that nonpolar/polar interactions, namely Val or Ile bonding to Lys or Arg in alpha-helices, can in fact be stabilizing. Residues spaced i, i + 4 in alpha-helices are on the same face of the helix, with potential to favorably interact and stabilize the structure. We observe that the nonpolar/polar pairs Ile-Lys, Ile-Arg, and Val-Lys occur in protein helices more often than expected when spaced i, i + 4. Partially helical peptides containing pairs of nonpolar/polar residues were synthesized. Controls with i, i + 5 spacing have the residues on opposite faces of the helix and are less helical than the test peptides with the i, i + 4 interactions. Experimental circular dichroism results were analyzed with helix-coil theory to calculate the free energy for the interactions. All three stabilize the helix with DeltaG between -0.14 and -0.32 kcal x mol(-1). The interactions are hydrophobic with contacts between Val or Ile and the alkyl groups in Arg or Lys. Side chains such as Lys and Arg can thus interact favorably with both polar and nonpolar residues.     

Addition of side chain interactions to modified Lifson-Roig helix-coil theory: application to energetics of phenylalanine-methionine interactions.

We introduce here i, i + 3 and i, i + 4 side chain interactions into the modified Lifson-Roig helix-coil theory of Doig et al. (1994, Biochemistry 33:3396-3403). The helix/coil equilibrium is a function of initiation, propagation, capping, and side chain interaction parameters. If each of these parameters is known, the helix content of any isolated peptide can be predicted. The model considers every possible conformation of a peptide, is not limited to peptides with only a single helical segment, and has physically meaningful parameters. We apply the theory to measure the i, i + 4 interaction energies between Phe and Met side chains. Peptides with these residues spaced i, i + 4 are significantly more helical than controls where they are spaced i, i + 5. Application of the model yields delta G for the Phe-Met orientation to be -0.75 kcal.mol-1, whereas that for the Met-Phe orientation is -0.54 kcal.mol-1. These orientational preferences can be explained, in part, by rotamer preferences for the interacting side chains. We place Phe-Met i, i + 4 at the N-terminus, the C-terminus, and in the center of the host peptide. The model quantitatively predicts the observed helix contents using a single parameter for the side chain-side chain interaction energy. This result indicates that the model works well even when the interaction is at different locations in the helix.     

Anticooperativity in a Glu-Lys-Glu salt bridge triplet in an isolated alpha-helical peptide

Salt bridges between oppositely charged side chains are well-known to stabilize protein structure, though their contributions vary considerably. Here we study Glu-Lys and Lys-Glu salt bridges, formed when the residues are spaced i, i + 4 surface of an isolated alpha-helix in aqueous solution. Both are stabilizing by -0.60 and -1.02 kcal/mol, respectively, when the interacting residues are fully charged. When the side chains are spaced i, i + 4, i + 8, forming a Glu-Lys-Glu triplet, the second salt bridge provides no additional stabilization to the helix. We attribute this to the inability of the central Lys to form two salt bridges simultaneously. Analysis of these salt bridges in protein structures shows that the Lys-Glu interaction is dominant, with the side chains of the Glu-Lys pair far apart.     

Cooperative helix stabilization by complex Arg-Glu salt bridges

Among the interactions that stabilize the native state of proteins, the role of electrostatic interactions has been difficult to quantify precisely. Surface salt bridges or ion pairs between acidic and basic side chains have only a modest stabilizing effect on the stability of helical peptides or proteins: estimates are roughly 0.5 kcal/mol or less. On the other hand, theoretical arguments and the occurrence of salt bridge networks in thermophilic proteins suggest that multiple salt bridges may exert a stronger stabilizing effect. We show here that triads of charged side chains, Arg(+)-Glu(-)-Arg(+) spaced at i,i+4 or i,i+3 intervals in a helical peptide stabilize alpha helix by more than the additive contribution of two single salt bridges. The free energy of the triad is more than 1 kcal/mol in excess of the sum of the individual pairs, measured in low salt concentration (10 mM). The effect of spacing the three groups is severe; placing the charges at i,i+4 or i,i+3 sites has a strong effect on stability relative to single bridges; other combinations are weaker. A conservative calculation suggests that interactions of this kind between salt bridges can account for much of the stabilization of certain thermophilic proteins.     

Side chain-side chain interactions of arginine with tyrosine and aspartic acid in Arg/Gly/Tyr-rich domains within plant glycine-rich RNA binding proteins

Plant glycine-rich RNA-binding proteins (GRRBPs) contain a glycine-rich region at the C-terminus whose structure is quite unknown. The C-terminal glycine-rich part is interposed with arginine and tyrosine (arginine/glycine/tyrosine (RGY)-rich domain). Comparative sequence analysis of forty-one GRRBPs revealed that the RGY-rich domain contains multiple repeats of Tyr-(Xaa)h-(Arg)k-(Xaa)l, where Xaa is mainly Gly, "k" is 1 or 2, and "h" and "l" range from 0 to 10. Two peptides, 1 (G1G2Y3G4G5G6R7R8D9G10) and 2 (G1G2R3R4D5G6G7Y8G9G10), corresponding to sections of the RGY-rich domain in Zea mays RAB15, were selected for CD and NMR experiments. The CD spectra indicate a unique, positive band near 228 nm in both peptides that has been ascribed to tyrosine residues in ordered structures. The pH titration by NMR revealed that a side chain-side chain interaction, presumably an H-Nepsilon...O=Cgamma hydrogen bonding interaction in the salt bridge, occurs between Arg (i) and Asp (i + 2). 1D GOESY experiments indicated the presence of NOE between the aromatic side chain proton and the arginine side chain proton in the two peptides suggesting strongly that the Arg (i) aromatic side chain interacts directly with the Tyr (i +/- 4 or i +/- 5) side chain.     

Helicity of short E-R/K peptides

Understanding the secondary structure of peptides is important in protein folding, enzyme function, and peptide‐based drug design. Previous studies of synthetic Ala‐based peptides (>12 a.a.) have demonstrated the role for charged side chain interactions involving Glu/Lys or Glu/Arg spaced three (i, i + 3) or four (i, i + 4) residues apart. The secondary structure of short peptides (<9 a.a.), however, has not been investigated. In this study, the effect of repetitive Glu/Lys or Glu/Arg side chain interactions, giving rise to E‐R/K helices, on the helicity of short peptides was examined using circular dichroism. Short E‐R/K–based peptides show significant helix content. Peptides containing one or more E‐R interactions display greater helicity than those with similar E‐K interactions. Significant helicity is achieved in Arg‐based E‐R/K peptides eight, six, and five amino acids long. In these short peptides, each additional i + 3 and i + 4 salt bridge has substantial contribution to fractional helix content. The E‐R/K peptides exhibit a strongly linear melt curve indicative of noncooperative folding. The significant helicity of these short peptides with predictable dependence on number, position, and type of side chain interactions makes them an important consideration in peptide design.     

Amino acid type-selective backbone 1H-15N-correlations for Arg and Lys

Four novel amino acid type-selective triple resonance experiments to identify the backbone amino proton and nitrogen resonances of Arg and Lys and of their sequential neighbors in (¹³C,¹⁵N)-labeled proteins are presented: the R(i+1)-HSQC and R(i,i+1)-HSQC select signals originating from Arg side chains, the K(i+1)-HSQC and K(i,i+1)-HSQC select signals originating from Lys side chains. The selection is based on exploiting the characteristic chemical shifts of a pair of carbon atoms in Arg and Lys side chains using selective 90° pulses. The new experiments are recorded as two-dimensional ¹H-¹⁵N-correlations and their performance is demonstrated with the application to a protein domain of 83 amino acids.     

Origin of the different strengths of the (i,i+4) and (i,i+3) leucine pair interactions in helices

Pairs of leucine side chains, spaced either (i,i+3) or (i,i+4), are known to stabilize alanine-based peptide helices, Experiments with new peptide sequences confirm that the (i,i+4) pair interaction is markedly stronger than the (i,i+3) pair interaction. This result is not expected from reported Monte Carlo simulations, which predict that the (i,i+3) interaction is slightly stronger. The interaction strength can be predicted from recently reported measurements of buried non-polar surface area, obtained from structures in the Protein Data Bank: the agreement is reasonable for the (i,i+3) LL interaction but underestimates the (i,i+4) LL interaction. Solvation of peptide groups in the helix backbone may contribute to the different strengths of the two LL pair interactions because different chi(1) leucine rotamers are used and the (i,i+3) pair shields two peptide groups whereas the (i,i+4) pair shields only one. A rough estimate of the backbone solvation effect, based on the difference between the helix propensities of leucine and alanine, agrees with the size of the difference between the (i,i+3) and (i,i+4) leucine pair interactions.     

Stabilization of Helical Peptides by Mixed Spaced Salt Bridges

Abstract

Whether or not surface salt bridges have a strong stabilizing effect on the native structure in proteins remains uncertain. Previous studies of model peptides have shown that salt bridges spaced at i,i+4 along the chain are more stabilizing than those spaced at i,i+3, with a preference for the order acid-base rather than base-acid from N to C terminus. An analysis of the effect of spacing the ion pairs in short helical peptides is presented, in which acidic and basic side chains spaced two or three residues apart alternate along the chain. The mixed spacing proves to be stabilizing relative to pure spacings. A control peptide in which salt bridges were spaced uniformly three residues apart proved to form a β-sheet structure rather than a-helix. This is due to formation of a silk-like apolar face consisting of alanine side chains; the mesoscopic structure formed by these sheets can be imaged by scanning microscopy.     

Tests for helix-stabilizing interactions between various nonpolar side chains in alanine-based peptides.

Straight-chain, non-natural, nonpolar amino acids norleucine, norvaline, and alpha-amino-n-butyric acid at various spacings do not interact with themselves to stabilize helix formation in alanine-based peptides, but do interact with a Tyr spaced i, i + 4 to stabilize alanine helices, similar to the helix-stabilizing i, i + 4 Tyr-Leu and Tyr-Val interactions reported earlier (Padmanabhan S, Baldwin RL, 1994, J Mol Biol 241:706-713). Leu spaced i, i + 4 from another Leu is measurably helix-stabilizing relative to the corresponding i, i + 3 pair, but less so than for i, i + 4 Val-Leu, Ile-Leu, or Phe-Leu pairs (relative to the corresponding i, i + 3 pairs) when Leu is C-terminal to the other nonpolar amino acid. Our results indicate that limited side-chain flexibility in an alpha-helix strongly favors the interaction between 2 nonpolar residues to stabilize an isolated alpha-helix.     

Molecular dynamics simulations of pentapeptides at interfaces: salt bridge and cation-pi interactions

Peptide-membrane interactions are important for understanding the binding, partitioning, and folding of membrane proteins; the activity of antimicrobial and fusion peptides; and a number of other processes. We describe molecular dynamics simulations (10-25 ns) of two pentapeptides Ace-WLXLL (with X = Arg or Lys side chain) (White, S. H., and Wimley, W.C. (1996) Nat. Struct. Biol. 3, 842-848) in water and three different membrane mimetic systems: (i) a water/cyclohexane interface, (ii) water-saturated octanol, and (iii) a solvated dioleoylphosphatidylcholine bilayer. A salt bridge is found between the protonated Arg or Lys side chains with the carboxyl terminus at the three interfaces. In water/cyclohexane, the salt bridge is most exposed to the water phase and least stable. In water/octanol and the lipid bilayer systems, the salt bridge once formed persists throughout the simulations. In the lipid bilayer, the salt bridge is more stable when the peptide penetrates deeper into the bilayer. In one of two peptides, a cation-pi interaction between the Arg and the Trp side chains is stable in the lipid bilayer for about 15 ns before breaking. In all cases, the conformations of the peptides are restricted by their presence at the interface and can be assigned to a few major conformational clusters. Side chains facing the water phase are most mobile. In the lipid bilayer, the peptides remain in the interface area, where they overlap with the carbonyl area of the lipid bilayer and perturb the local density profile of the bilayer. The tryptophan side chain remains in the water-lipid interface, where it interacts with the lipid choline group and forms hydrogen bonds with the ester carbonyl of the lipid and with water in the interface.     

The phosphorylation sites of troponin T from white skeletal muscle and the effects of interaction with troponin C on their phosphorylation by phosphorylase kinase.

1. The phosphorylation of troponin T from rabbit white sketetal muscle is catalysed by phosphorylase kinase, but not at a significant rate by bovine 3':5'-cyclic AMP-dependent protein kinase. 2. The amino acid sequences adjacent to the three major phosphorylation sites of troponin T were determined. 3. The serine in the N-terminal peptide (Asx,SerP, Glx)Glu-Val-Glu, is that phosphorylated (SerP, phosphoserine) when the troponin complex is isolated. 4. The other two sites of phosphorylation are located in the sequence Ala-Leu-(Ser, SerP)-Met-Gly-Ala-Asn-Tyr(Ser,SerP)Tyr. 5. When troponin T is phosphorylated in the presence of troponin C, the extent of phosphorylation at each site is considerably decreased. 6. CNBr fragments of troponin T are also phosphorylated by phosphorylase kinase, but the rate of phosphorylation at each site in the CNBr fragments is considerably slower than in the native protein. 7. From these studies it is suggested that troponin C interacts with troponin T in the region containing the two closely situated phosphorylation sites.     

Salt bridges do not stabilize polyproline II helices

Interactions between side chains, and in particular salt bridges, have been shown to be important in the stabilization of secondary structure. Here we investigate the contribution of a salt bridge formed between a lysine and a glutamate to the polyproline II (P(II)) helical content of proline-rich peptides. Since this structure has precisely three residues per turn, charged residues spaced three residues apart are on the same side of the helix and are best situated to interact. By contrast, computer simulations show that charged residues spaced four residues apart are both too far apart to interact strongly and are oriented such that interactions are unlikely. We have measured the P(II) content of peptides containing a lysine and glutamate pair spaced three or four residues apart using circular dichroism spectroscopy. Somewhat surprisingly we find that the P(II) content is insensitive to both the spacing and the pH. These findings indicate that i --> i + 3 salt bridges do not stabilize the P(II) helical conformation. The implications of these observations for both P(II) helix formation and denatured protein conformations are discussed.     

Effect of lysine side chain length on intra-helical glutamate--lysine ion pairing interactions

Ion-pairing interactions are important for protein stabilization. Despite the apparent electrostatic nature of these interactions, natural positively charged amino acids Lys and Arg have multiple methylenes linking the charged functionality to the backbone. Interestingly, the amino acids Lys and Orn have positively charged side chains that differ by only one methylene. However, only Lys is encoded and incorporated into proteins. To investigate the effect of side chain length of Lys on ion-pairing interactions, a series of 12 monomeric alpha-helical peptides containing potential Glu-Xaa (i, i+3), (i, i+4) and (i, i+5) (Xaa = Lys, Orn, Dab, Dap) interactions were studied by circular dichroism (CD) spectroscopy at pH 7 and 2. At pH 7, no Glu-Xaa (i, i+5) interaction was observed, regardless of the Xaa side chain length. Furthermore, only Lys was capable of supporting Glu-Xaa (i, i+3) interactions, whereas any Xaa side chain length supported Glu-Xaa (i, i+4) interactions. Side chain conformational analysis by molecular mechanics calculations showed that the side chain length of Lys enables the Glu-Xaa (i, i+3) interaction with lower energy conformations compared to residues with side chain lengths shorter than that of Lys. Furthermore, these calculated low energy conformers were consistent with conformations of intra-helical Glu-Lys salt bridges in a non-redundant protein structure database. Importantly, the CD spectra for peptides with Glu-Lys interactions did not alter significantly upon changing the pH because of a greater contribution to these interactions by forces other than electrostatics. Incorporating side chains just one methylene shorter (Orn) resulted in significant pH dependence or lack of interaction, suggesting that nature has chosen Lys to form durable interactions with negatively charged functional groups.     

Mutational analysis of the human immunodeficiency virus type 1 env gene product proteolytic cleavage site.

The structural requirements for proteolytic cleavage of the human immunodeficiency virus type 1 env gene product, gp160, to gp120 and gp41 have been assessed by specific mutagenesis of the sequence Lys Ala Lys Arg Arg Val Val Glu Arg Glu Lys Arg located between amino acids 500 and 511, i.e., at the putative C terminus of gp120. The basic amino acids underlined have been mutated, individually and in combination, to neutral amino acids, and the cleavability of the mutated env gene products was examined after expression in CV-1 cells. The results show that the replacement of Arg-511 (cleavage presumably occurs C terminal to this amino acid) with Ser completely abolishes recognition and cleavage by the cellular protease(s), i.e., the remaining basic amino acids in the vicinity do not serve as alternative substrates. However, Arg-508 and Lys-510 are important features of the recognition site since, when they are individually changed to neutral amino acids, cleavage is severely impaired. The basic amino acids 500, 502, and 504 are, individually, not important for cleavage, since their individual replacement by neutral amino acids does not impair cleavage. However, when all four basic amino acids 500, 502, 503, and 504 are changed to neutral amino acids, cleavage is almost completely abolished. This shows that the sequence Arg Glu Lys Arg at the cleavage site is alone not sufficient for cleavage but that a contribution of other amino acids is required, whether the other amino acids provide a basic character or a certain structure in the vicinity of the cleavage site. When noncleavable or poorly cleavable mutant env genes are expressed from the infectious plasmid pNL4-3 in CD4+ human lymphoblastoid cells, noninfectious virus, incapable of spread throughout the culture, is produced.     

The relative orientation of the Arg and Asp side chains defined by a pseudodihedral angle as a key criterion for evaluating the structure-activity relationship of RGD peptides.

The ability of an integrin to distinguish between the RGD-containing extracellular matrix proteins is thought to be due partially to the variety of RGD conformations. Three criteria have been proposed for the evaluation of the structure-activity relationship of RGD-containing peptides. These include: (i) the distance between the charged centres, (ii) the distance between the Arg Cbeta and Asp Cbeta atoms, and (iii) the pseudo-dihedral angle defining the Arg and Asp side-chain orientation formed by the Arg Czeta, Arg Calpha, Asp Calpha and Asp Cgamma atoms. A comparative conformation-activity study was performed between linear RGD peptides and strongly constrained cyclic (S,S) -CDC- bearing compounds, which cover a wide range of inhibition potency of platelet aggregation. It is concluded that the fulfilment of the -45 degrees < or = pseudo-dihedral angle < or = +45 degrees criterion is a prerequisite for an RGD compound to exhibit inhibitory activity. Once this criterion is accomplished, the longer the distance between the charged centres and/or between the Arg and Asp Cbeta atoms, the higher is the biological activity. In addition, the stronger the ionic interaction between Arg and Asp charged side chains, the lower the anti-aggregatory activity.     

Solution structure of a bent alpha-helix

We present the solution structure determination of a peptide with sequence Ac-WEAQAREALAKEAQARA-NH2, using NMR data. The peptide has a high population of a stable alpha-helical structure in the middle with fraying ends. In addition, our data are consistent with the presence of several other transient and interconverting conformers. The peptide sequence was designed using amino acids that have propensity for alpha-helix specificity. The presence of E-R/K (i, i + 4) ion pairs was expected to enhance the stability of the alpha-helix by introducing favorable electrostatic interactions at the side chain level, in addition to the characteristic backbone (i, i + 4) hydrogen bonds. The NMR structural ensemble demonstrates competition between E-R/K (i, i + 4) and (i, i - 1) ion pair formation, with the (i, i - 1) interactions being dominant. The relative topologies of the charged side chains demonstrate flexibility and overall compromised favorable medium/long-range electrostatic interactions. The peptide alpha-helix is bent despite the lack of an amphipathic sequence. Bending is introduced by a strong (i, i + 8) hydrophobic interaction between the side chains of N-terminal tryptophan and leucine at the middle of the peptide sequence.     

Iron(III)--phosphoprotein chelates: stoichiometric equilibrium constant for interation of iron(III) and phosphorylserine residues of phosvitin and casein.

Estimates of the strength of iron binding to model phosphoproteins were obtained from equilibrium dialysis experiments. Iron-free phosvitin (chicken and frog) or alpha sl-casein (cow) was dialyzed against the iron(III) chelates of nitrilotriacetate (NTA), )ethylenedinitrilo)tetraacetate (EDTA), or citrate. Protein-bound metal was measured at equilibrium; competition of chelator and phosphoprotein for iron(III) was determined by reference to comprehensive equilibrium equations presented in the Appendix. Analysis of the iron-binding data for phosvitin suggested that clusters of di-O-phosphorylserine residues (SerP.SerP) were the most probable iron-binding sites. A stoichiometric equilibrium constant of 10(18.0) was calculated for the formation of the Fe3+(SerP.SerP) chelate. When comared on the basis of phosphate content, casein bound iron more weakly than phosvitin. However, if the stoichiometric equilibrium constant for the formation of the casein Fe3+(SerP.SerP) chelate (10(17.5) was adjusted to account for the fact that a smaller percentage of casein phosphoserines occurs in di-O-phosphorylserine clusters, the affinity of casein and phosvitin for iron was very similar. A theoretical comparison showed that the "strengths" of the ferric chelates can be ranked: EDTA greater than phosphoprotein di-O-phosphorylserine greater than citrate greater than NTA.     

Physiology and Substrate Specificity of Two Closely Related Amino Acid Transporters,SerP1 and SerP2, of Lactococcus lactis

The serP1 and serP2 genes found adjacently on the chromosome of Lactococcus lactis strains encode two members of the amino acid-polyamine-organocation (APC) superfamily of secondary transporters that share 61% sequence identity. SerP1 transports l-serine, l-threonine, and l-cysteine with high affinity. Affinity constants (K_m) are in the 20 to 40 μM range. SerP2 is a dl-alanine/dl-serine/glycine transporter. The preferred substrate appears to be dl-alanine for which the affinities were found to be 38 and 20 μM for the d and l isomers, respectively. The common substrate l-serine is a high-affinity substrate of SerP1 and a low-affinity substrate of SerP2 with affinity constants of 18 and 356 μM, respectively. Growth experiments demonstrate that SerP1 is the main l-serine transporter responsible for optimal growth in media containing free amino acids as the sole source of amino acids. SerP2 is able to replace SerP1 in this role only in medium lacking the high-affinity substrates l-alanine and glycine. SerP2 plays an adverse role for the cell by being solely responsible for the uptake of toxic d-serine. The main function of SerP2 is in cell wall biosynthesis through the uptake of d-alanine, an essential precursor in peptidoglycan synthesis. SerP2 has overlapping substrate specificity and shares 42% sequence identity with CycA of Escherichia coli, a transporter whose involvement in peptidoglycan synthesis is well established. No evidence was obtained for a role of SerP1 and SerP2 in the excretion of excess amino acids during growth of L. lactis on protein/peptide-rich media.     

Reversion of argE3 ochre strain Escherichia coli AB1157 as a tool for studying the stationary-phase (adaptive) mutations

Adaptive (starvation-associated) mutations occur in non-dividing cells and allow growth under the selective conditions imposed. We developed a new method for the determination of adaptive mutations in Escherichia coli. The system involves reversion to prototrophy of the argE3OC mutation and was tested on AB1157 strains mutated in the mutT and/or mutY genes. The bacteria that mutated adaptively grow into colonies on minimal medium plates devoid of arginine (starvation conditions) when incubated longer than 4 days. Using the replica plating method we solved the problem of discrimination between growth-dependent and adaptive argE3-->Arg+ revertants. Phenotype analysis and susceptibility of the Arg+ revertants to a set of T4 phage mutants create an additional possibility to draw a distinction between these two types of Arg+ revertants.