Cell wall proteins of Aquaspirillum serpens.

The Triton X-100-insoluble wall fraction of Aquaspirillum serpens VHA contained three major proteins: the regularly structured (RS) superficial protein (molecular weight 140,000) and two peptidoglycan-associated proteins (molecular weights, 32,000 and 33,000). The molecular arrangement and interactions of the outer membrane and RS proteins were examined with the use of bifunctional cross-linking reagents. The peptidoglycan-associated and RS proteins were not readily cross-linked in either homo- or heteropolymers. This suggests that the free amino groups are not suitably disposed for cross-linking. Some high-molecular-weight multimers of the RS protein were produced, but the subunit structure of the RS array was not stabilized by cross-linking. The peptidoglycan-associated proteins were cross-linked to high-molecular-weight multimers, but no dimers or trimers were produced. This result suggests that these proteins exist in the outer membrane as multimers larger than trimers.     

Proteins from the prokaryotic nucleoid. A protein-protein cross-linking study on the quaternary structure of Escherichia coli DNA-binding protein NS (HU)

Escherichia coli DNA-binding proteins NS1, NS2 and NS (NS1 + NS2) react with the protein-protein bifunctional cross-linking reagents dimethylsuberimidate and dimethyladipimidate to yield oligomers up to hexamers. The former reagent, with the longer arm, is more efficient than the other shorter one. Both one- and two-dimensional gel electrophoreses show that the cross-linked trimers are homogeneous, while the dimers appear heterogeneous, suggesting that at least two types of dimers but geometrically equivalent trimers are formed. In the presence of DNA, the cross-linking reaction with either reagent yields fewer dimers and more of the larger products. The yield of cross-linked products of various sizes was determined for NS1, NS2 and NS as a function of the protein concentration (0.03-3000 microM). From the results obtained in these experiments, we derived a model of quaternary structure in which dimers and tetramers are predominant in very solutions of the proteins. Above a critical concentration (10-50 microM), interactions among tetramers become increasingly important, yielding octamers and perhaps larger products. Our data do not support a recently proposed model in which the DNA is packaged around a protein disc consisting of 8-10 NS dimers.     

Factors affecting gamma-chain multimer formation in cross-linked fibrin.

The major covalently linked multimolecular D fragments found in plasmic digests of factor XIIIa cross-linked fibrin formed under physiological pH and ionic strength conditions consist of D dimers, D trimers, and D tetramers. These fragments are linked by epsilon-amino-gamma-glutamyllysine bonds in the carboxy-terminal regions of their gamma chains, which had originated in the cross-linked fibrin as gamma dimers, gamma trimers, and gamma tetramers, respectively. In this study, factors affecting the degree and rate of formation of these three classes of cross-linked gamma chains were determined by analyzing the D-fragment content of plasmic digests of cross-linked fibrin that had been sampled after all gamma-chain monomers had been consumed in the cross-linking process. D trimers and D tetramers, expressed as a proportion of the total D-fragment content, both increased at the expense of the D-dimer population as a function of increasing factor XIII concentration, the time of cross-linking, or the CaCl2 concentration. Their levels decreased as the ionic strength was raised by NaCl addition. However, the ionic strength effect could be reversed by concomitantly raising the CaCl2 concentration. Digests of clots prepared from recalcified fresh citrated plasma also contained each type of cross-linked D fragment, and the proportion of D trimers and D tetramers in the digest increased with increasing clot incubation time. These results indicate that gamma-trimer and gamma-tetramer formation is a dynamic physiological process.(ABSTRACT TRUNCATED AT 250 WORDS)     

Oligomeric state of the colon carcinoma-associated glycoprotein GA733-2 (Ep-CAM/EGP40) and its role in GA733-mediated homotypic cell-cell adhesion

The GA733-2 antigen (GA733) is a homotypic calcium-independent cell adhesion molecule (CAM) present in most normal human epithelial cells and gastrointestinal carcinomas. Because oligomerization of some CAMs regulates cell adhesion and signal transduction, the correlation between GA733 oligomeric state and cell-cell adhesion was investigated. Sedimentation equilibrium studies showed that full-length (-FL) GA733 exists as dimers and tetramers in solution, whereas the GA733 extracellular domain (-EC) is a monomer. The Kd of GA733-FL is less than 10 nm for the monomer-dimer association, whereas the dimer-tetramer association is about 1000-fold weaker (Kd approximately 10 microm). Chemical cross-linking of purified GA733-FL in solution resulted in a major product corresponding to GA733 dimers, and minor amounts of trimers and tetramers. However, GA733-EC cross-linked under the same conditions was consistently a monomer. Chemical cross-linking of dissociated colon carcinoma cells produced predominantly GA733 dimers, whereas cross-linking of cells in monolayers yielded some tetramers as well. GA733-FL retained its cell-cell adhesion function as shown by inhibition of cell aggregation, whereas monomeric GA733-EC was inactive. These data show that GA733 exists predominantly as high affinity noncovalent cis-dimers in solution and on dissociated colon carcinoma cells. The lower affinity association of dimers to form tetramers is most likely the head-to-head interaction between GA733 cis-dimers on opposing cells that represents its cell-cell adhesion activity.     

Dimeric, trimeric and tetrameric complexes of immunoglobulin G fix complement.

The binding of pure dimers, trimers and tetramers of randomly cross-linked non-immune rabbit immunoglobulin G to the first component and subcomponent of the complement system, C1 and C1q respectively, was studied. These oligomers possessed open linear structures. All three oligomers fixed complement with decreasing affinity in the order: tetramer, trimer, dimer. Complement fixation by dimeric immunoglobulin exhibited the strongest concentration-dependence. No clear distinction between a non-co-operative and a co-operative binding mechanism could be achieved, although the steepness of the complement-fixation curves for dimers and trimers was better reflected by the co-operative mechanism. Intrinsic binding constants were about 10(6)M-1 for dimers, 10(7)M-1 for trimers and 3 X 10(9)M-1 for tetramers, assuming non-co-operative binding. The data are consistent with a maximum valency of complement component C1 for immunoglobulin G protomers in the range 6-18. The binding of dimers to purified complement subcomponent C1q was demonstrated by sedimentation-velocity ultracentrifugation. Mild reduction of the complexes by dithioerythritol caused the immunoglobulin to revert to the monomeric state (S20,w = 6.2-6.5S) with concomitant loss of complement-fixing ability.     

Cutting edge: LFA-1 integrin-dependent T cell adhesion is regulated by both ag specificity and sensitivity

Ab stimulation of the TCR rapidly enhances the functional activity of the LFA-1 integrin. Although TCR-mediated changes in LFA-1 activity are thought to promote T cell-APC interactions, the Ag specificity and sensitivity of TCR-mediated triggering of LFA-1 is not clear. We demonstrate that peptide/MHC (pMHC) tetramers rapidly enhance LFA-1-dependent adhesion of OT-I TCR transgenic CD8(+) T cells to purified ICAM-1. Inhibition of src family tyrosine kinase or PI3K activity blocked pMHC tetramer- and anti-CD3-stimulated adhesion. These effects are highly specific because partial agonist and antagonist pMHC tetramers are unable to stimulate OT-I T cell adhesion to ICAM-1. The Ag thresholds required for T cell adhesion to ICAM-1 resemble those of early T cell activation events, because optimal LFA-1 activation occurs at tetramer concentrations that fail to induce maximal T cell proliferation. Thus, TCR signaling to LFA-1 is highly Ag specific and sensitive to low concentrations of Ag.     

Molecular characterization of peripherin-2 and rom-1 mutants responsible for digenic retinitis pigmentosa

Peripherin-2 and Rom-1 are homologous tetraspanning membrane proteins that assemble into noncovalent tetramers and higher order disulfide-linked oligomers implicated in photoreceptor disc morphogenesis. Individuals who coinherit a L185P peripherin-2 mutation and a null or G113E rom-1 mutation are afflicted with retinitis pigmentosa, whereas individuals who inherit only one defective gene are normal. We examined the expression, subunit assembly, and disulfide-mediated oligomerization of L185P and L185A peripherin-2 and L188P Rom-1 by velocity sedimentation, co-immunoprecipitation, and cross-linking. These mutants formed noncovalent dimers under disulfide-reducing conditions but failed to assemble into core tetramers. Under nonreducing conditions, L185P dimers formed disulfide-linked tetramers but not higher order oligomers. L185P coassembled with wild-type peripherin-2 and Rom-1 to form tetramers and higher order disulfide-linked oligomers characteristic of the wild-type proteins. The G113E Rom-1 mutant expressed 20-fold lower than wild-type Rom-1, indicating that it behaves mechanistically as a null allele. We conclude that Leu(185) of peripherin-2 (Leu(188) of Rom-1) is critical for tetramer but not dimer formation and that the core tetramer has 2-fold symmetry. Peripherin-2-containing tetramers are required for higher order disulfide-linked oligomer formation. The level of these oligomers is critical for stable photoreceptor disc formation and the digenic retinitis pigmentosa disease phenotype.     

Production of supercoiled multimeric plasmid DNA for biopharmaceutical application

Production of nucleic acids as an active pharmaceutical ingredient (API) in gene therapy and genetic vaccination is gaining more and more importance. Non-viral vectors like plasmid DNA are currently investigated in various clinical trials. Supercoiled multimeric plasmids are of particular interest for pharmaceutical purpose because they contain multiple copies of a therapeutic gene and can therefore be more efficient vectors. A process for the preparation of Escherichia coli strains replicating dimers, trimers, and tetramers of a 4.6 kb plasmid is presented. Cultivation of these clones on semi-defined glycerol medium in a 7 l bioreactor shows structural stability of dimers and trimers during the whole cultivation process. Plasmid concentrations and selectivities are compared to the corresponding cultivation with the plasmid monomer. Cultivation of the tetramer replicating strain shows a disintegration of the plasmid multimer and reconstitution of the monomer and smaller multimers.     

The composition of EphB2 clusters determines the strength in the cellular repulsion response

Trans interactions of erythropoietin-producing human hepatocellular (Eph) receptors with their membrane-bound ephrin ligands generate higher-order clusters that can form extended signaling arrays. The functional relevance of the cluster size for repulsive signaling is not understood. We used chemical dimerizers and fluorescence anisotropy to generate and visualize specific EphB2 cluster species in living cells. We find that cell collapse responses are induced by small-sized EphB2 clusters, suggesting that extended EphB2 arrays are dispensable and that EphB2 activation follows an ON–OFF switch with EphB2 dimers being inactive and trimers and tetramers being fully functional. Moreover, the strength of the collapse response is determined by the abundance of multimers over dimers within a cluster population: the more dimers are present, the weaker the response. Finally, we show that the C-terminal modules of EphB2 have negative regulatory effects on ephrin-induced clustering. These results shed new light on the mechanism and regulation of EphB2 activation and provide a model on how Eph signaling translates into graded cellular responses.     

Oligomeric structure and the anion transport function of human erythrocyte band 3 protein

Conclusions Evidence from many laboratories using several different techniques strongly suggests that, in the intact red cell, band 3 exists as dimers which can associate with other dimers to form tetramers. The kinetics of anion transport inhibition by stilbenedisulfonates indicate that irreversible inhibition of one subunit does not detectably affect anion transport by the other subunit. This does not imply that monomeric band 3 could necessarily transport anions; the native conformation of each subunit may require stabilizing interactions with another subunit, as indicated by the recent work of Boodhoo and Reithmeier [10]. A more detailed understanding of the structure of the band 3 dimer/tetramer will require information on which specific segments of the primary structure are involved in subunit-subunit contact. The combination of chemical cross-linking with proteolysis [136] is a promising approach to this problem.     

Purified lymphocyte function-associated antigen-3 (LFA-3) activates human thymocytes via the CD2 pathway

Defining the cellular and molecular mechanisms of interaction of developing thymocytes with nonlymphoid cells of the thymic microenvironment is critical for understanding normal thymus function. We have previously shown that the CD2/LFA-3 adhesion pathway is important in the interaction of thymocytes with a variety of LFA-3+ nonlymphoid thymic microenvironment cell types. Moreover, T cell activation via the CD2 (alternative, Ag independent) pathway is considered an important mechanism for intrathymic T cell proliferation. To study the relevance of CD2/LFA-3 interactions to human thymocyte activation, we have used purified LFA-3 Ag in several in vitro assays of thymocyte proliferation. Whereas LFA-3 Ag alone did not induce thymocyte proliferation, LFA-3 Ag in combination with the anti-CD2 antibody, CD2.1, and rIL-2 induced marked thymocyte proliferation. Additionally, the anti-CD28 antibody, Kolt2, could substitute for rIL-2, resulting in thymocyte activation induced by LFA-3 Ag in combination with antibodies CD2.1 and Kolt2. In both triggering systems, LFA-3 induced thymocyte activation was dependent upon the concentration of LFA-3 Ag. LFA-3 Ag-dependent thymocyte activation was directed primarily toward CD1-, mature thymocytes. Finally, intact SRBC that express the sheep homolog of LFA-3, T11TS, in combination with antibody CD2.1 and rIL-2 could also induce thymocyte activation. These data suggest that interaction of LFA-3 molecules with thymocyte CD2 molecules may provide a component of the stimulus for normal intrathymic thymocyte activation leading to thymocyte proliferation.     

Cross-linking and O-acetylation of peptidoglycan in Staphylococcus aureus (strains H and MR-1) grown in the presence of sub-growth-inhibitory concentrations of beta-lactam antibiotics

Staphylococcus aureus H was grown for 4 generation times with various sub-growth-inhibitory concentrations of beta-lactam antibiotics specific for particular penicillin-binding proteins (PBPs) - PBP2, clavulanic acid; PBP3, methicillin; PBP4, cefoxitin - and also with the non-specific benzylpenicillin. Isolated cell walls were digested with Chalaropsis muramidase and the resulting peptidoglycan fragments were fractionated by HPLC into disaccharide-peptide monomers and cross-linked dimers, trimers, tetramers and greater oligomers. The pattern of relative fragment concentrations with increasing amounts of drug was roughly the same regardless of the antibiotic used, monomers and dimers increasing while trimers and tetramers changed little and oligomers decreased rapidly. The patterns resembled closely those predicted by the 'random addition' model for multiple cross-link formation and not at all those predicted by the 'monomer addition' model. The O-acetylation of the peptidoglycan remained essentially unaffected under all these conditions. S. aureus MR-1, a constitutive producer of PBP2', gave similar results when treated with methicillin.     

Mutation-Directed Chemical Cross-Linking of Human Immunodeficiency Virus Type 1 gp41 Oligomers

The human immunodeficiency virus type 1 transmembrane protein gp41 oligomer anchors the attachment protein, gp120, to the viral envelope and mediates viral envelope-cell membrane fusion following gp120-CD4 receptor-chemokine coreceptor binding. We have used mutation-directed chemical cross-linking with bis(sulfosuccinimidyl)suberate (BS³) to investigate the architecture of the gp41 oligomer. Treatment of gp41 with BS³ generates a ladder of four bands on sodium dodecyl sulfate-polyacrylamide gels, corresponding to monomers, dimers, trimers, and tetramers. By systematically replacing gp41 lysines with arginine and determining the mutant gp41 cross-linking pattern, we observed that gp41 N termini are cross-linked. Lysine 678, which is close to the transmembrane sequence, was readily cross-linked to Lys-678 on other monomers within the oligomeric structure. This arrangement appears to be facilitated by the close packing of membrane-anchoring sequences, since the efficiency of assembly of heterooligomers between wild-type and mutant Env proteins is improved more than twofold if the mutant contains the membrane-anchoring sequence. We also detected close contacts between Lys-596 and Lys-612 in the disulfide-bonded loop/glycan cluster of one monomer and lysines in the N-terminal amphipathic α-helical oligomerization domain (Lys-569 and Lys-583) and C-terminal α-helical sequence (Lys-650 and Lys-660) of adjacent monomers. Precursor-processing efficiency, gp120-gp41 association, soluble recombinant CD4-induced shedding of gp120 from cell surface gp41, and acquisition of gp41 ectodomain conformational antibody epitopes were unaffected by the substitutions. However, the syncytium-forming function was most dependent on the conserved Lys-569 in the N-terminal α-helix. These results indicate that gp160-derived gp41 expressed in mammalian cells is a tetramer and provide information about the juxtaposition of gp41 structural elements within the oligomer.     

Assembly of nematode cuticle: role of hydrophobic interactions in CUT-2 cross-linking

CUT-2 is a component of cuticlin, the highly cross-linked, insoluble residue of the cuticle of the nematode Caenorhabditis elegans. A recombinant fragment of CUT-2, produced in E. coli, can be cross-linked in vitro by horse radish peroxidase via dityrosine formation to give large molecular species [1]. In this paper it is shown that the formation of CUT-2 polymers is greatly favoured over that of CUT-2 oligomers as no low molecular weight intermediates, dimers or trimers can be detected even when the cross-linking reaction is slowed or interrupted before completion. This suggests that recombinant CUT-2 forms large non-covalent complexes that are the only competent substrate for cross-linking. The inhibition of cross-linking by urea and the behavior of recombinant CUT-2 in size-exclusion chromatography under a variety of conditions suggest that hydrophobic interactions are important in the formation and stabilization of these complexes. The complexes are excellent substrates for cross-linking but react poorly with free tyrosine. In contrast, a soluble recombinant CUT-2 is a poor substrate for cross-linking but can efficiently react with free tyrosine.     

Predicting oligomeric assemblies: N-mers a primer

Multi-protein complexes play key roles in many biological processes. However, since the structures of these assemblies are hard to resolve experimentally, the detailed mechanism of how they work cooperatively in the cell has remained elusive. Similarly, recent advances on in silico prediction of protein-protein interactions have so far avoided this difficult problem. In this paper, we present a general algorithm to predict molecular assemblies of homo-oligomers. Given the number of N-mers and the 3D structure of one monomer, the method samples all the possible symmetries that N-mers can be assembled. Based on a scoring function that clusters the low free energy structures at each binding interface, the algorithm predicts the complex structure as well as the symmetry of the protein assembly. The method is quite general and does not involve any free parameters. The algorithm has been implemented as a public server and integrated to the protein-protein complex prediction server ClusPro. Using this application, we validated predictions for trimers, tetramers (discriminating between dimer of dimers and 4-fold symmetry structures), pentamers and hexamers (discriminating between trimer of dimers, dimer of trimers, and 6-fold symmetry structures), for a total of 107 assemblies. For 85% of the multimers, the server predicts the complex structure within an average rms deviation of 2A from the full crystal. For complexes that involve more than one binding interface, the cluster size at each surface provides a strong indication as to which interface forms first. With improving scoring functions and computer power, our multimer docking approach could be used as a framework to address the more general problem of multi-protein assemblies.     

Tetramer protein complex interface residue pairs prediction with LSTM combined with graph representations

MotivationProtein-protein interactions are important for many biological processes. Theoretical understanding of the structurally determining factors of interaction sites will help to understand the underlying mechanism of protein-protein interactions. Taking advantage of advanced mathematical methods to correctly predict interaction sites will be useful. Although some previous studies have been devoted to the interaction interface of protein monomer and the interface residues between chains of protein dimers, very few studies about the interface residues prediction of protein multimers, including trimers, tetramer and even more monomers in a large protein complex. As we all know, a large number of proteins function with the form of multibody protein complexes. And the complexity of the protein multimers structure causes the difficulty of interface residues prediction on them. So, we hope to build a method for the prediction of protein tetramer interface residue pairs.ResultsHere, we developed a new deep network based on LSTM network combining with graph to predict protein tetramers interaction interface residue pairs. On account of the protein structure data is not the same as the image or video data which is well-arranged matrices, namely the Euclidean Structure mentioned in many researches. Because the Non-Euclidean Structure data can't keep the translation invariance, and we hope to extract some spatial features from this kind of data applying on deep learning, an algorithm combining with graph was developed to predict the interface residue pairs of protein interactions based on a topological graph building a relationship between vertexes and edges in graph theory combining multilayer Long Short-Term Memory network. First, selecting the training and test samples from the Protein Data Bank, and then extracting the physicochemical property features and the geometric features of surface residue associated with interfacial properties. Subsequently, we transform the protein multimers data to topological graphs and predict protein interaction interface residue pairs using the model. In addition, different types of evaluation indicators verified its validity.     

Production of multimeric forms of CD4 through a sugar-based cross-linking strategy

We have developed a three-step cross-linking procedure that is specifically targeted at the carbohydrate on a protein and applied it to CD4 as a model system for studying the role of multivalent interactions in function. In the first step CD4 was oxidized with periodate, creating aldehydes that served as targets for the subsequent chemistry. Next the aldehydes were modified with cystamine, converting the reactive group into a thiol. Finally cross-linking through the thiol moiety was generated with the homobifunctional cross-linker bismaleimidohexane. With this procedure, approximately 60% of the CD4 was converted into higher molecular weight complexes that were soluble and retained function as assessed by glycoprotein gp120 binding activity. CD4 dimers and tetramers by mass were 4 and 15 times as active as CD4 monomer in blocking virus infection with HTLV-IIIB in an in vitro cellular assay. The cross-linking chemistry provides an efficient method for producing homomultimers of a glycoprotein.     

Elucidation of the ribonuclease A aggregation process mediated by 3D domain swapping: a computational approach reveals possible new multimeric structures

By lyophilization from 40% acetic acid solutions, bovine pancreatic ribonuclease A forms several three-dimensional (3D) domain-swapped oligomers: dimers, trimers, tetramers, pentamers, hexamers, and traces of high-order oligomers, purifiable by cation-exchange chromatography. Each oligomeric species consists of at least two conformers displaying different basicity density, and/or exposure of positive charges. The structures of the two dimers and one trimer have been solved. Plausible models have been proposed for a second RNase A trimer and four tetramers, but not all the models are certainly assignable to the tetramers purified. Further studies have also been made on the pentameric and hexameric species, again without reaching structurally clear-cut results. This work is focused on the detailed modeling of the tetrameric RNase A species, using four different approaches to possibly clarify unknown structural aspects. The results obtained do not confirm the validity of one tetrameric model previously proposed, but allow the proposal of a novel tetrameric structure displaying new interfaces that are absent in the other known conformers. New details concerning other tetrameric structures are also described. RNase A multimers larger than tetramers, i.e., pentamers, hexamers, octamers, nonamers, up to dodecamers, are also modeled, with the proposal of novel domain-swapped structures, and the confirmation of what had previously been inferred. Finally, the propensity of RNase A to possibly form high-order supramolecular multimers is analyzed starting from the large number of domain-swapped RNase A conformers modeled.