Substrate radical intermediates in soluble methane monooxygenase

EPR spin-trapping experiments were carried out using the three-component soluble methane monooxygenase (MMO). Spin-traps 5,5-dimethyl-1-pyrroline N-oxide (DMPO), alpha-4-pyridyl-1-oxide N-tert-butylnitrone (POBN), and nitrosobenzene (NOB) were used to investigate the possible formation of substrate radical intermediates during catalysis. In contrast to a previous report, the NADH-coupled oxidations of various substrates did not produce any trapped radical species when DMPO or POBN was present. However, radicals were detected by these traps when only the MMO reductase component and NADH were present. DMPO and POBN were found to be weak inhibitors of the MMO reaction. In contrast, NOB is a strong inhibitor for the MMO-catalyzed nitrobenzene oxidation reaction. When NOB was used as a spin-trap in the complete MMO system with or without substrate, EPR signals from an NOB radical were detected. We propose that a molecule of NOB acts simultaneously as a substrate and a spin-trap for MMO, yielding the long-lived radical and supporting a stepwise mechanism for MMO.     

Desaturation reactions catalyzed by soluble methane monooxygenase

Soluble methane monooxygenase (MMO) is shown to be capable of catalyzing desaturation reactions in addition to the usual hydroxylation and epoxidation reactions. Dehydrogenated products are generated from MMO-catalyzed oxidation of certain substrates including ethylbenzene and cyclohexadienes. In the reaction of ethylbenzene, desaturation of ethyl C-H occurred along with the conventional hydroxvlations of ethyl and phenyl C-Hs. As a result, styrene is formed together with ethylphenols and phenylethanols. Similarly, when 1,3- and 1,4-cyclohexadienes were used as substrates, benzene was detected as a product in addition to the corresponding alcohols and epoxides. In all cases, reaction conditions were found to significantly affect the distribution among the different products. This new activity of MMO is postulated to be associated with the chemical properties of the substrates rather than fundamental changes in the nature of the oxygen and C-H activation chemistries. The formation of the desaturated products is rationalized by formation of a substrate cationic intermediate, possibly via a radical precursor. The cationic species is then proposed to partition between recombination (alcohol formation) and elimination (alkene production) pathways. This novel function of MMO indicates close mechanistic kinship between the hydroxylation and desaturation reactions catalyzed by the nonheme diiron clusters.     

Differential inhibition in vivo of ammonia monooxygenase, soluble methane monooxygenase and membrane-associated methane monoxygenase by phenylacetylene

Phenylacetylene was investigated as a differential inhibitor of ammonia monooxygenase (AMO), soluble methane monooxygenase (sMMO) and membrane-associated or particulate methane monooxygenase (pMMO) in vivo. At phenylacetylene concentrations > 1 microM, whole-cell AMO activity in Nitrosomonas europaea was completely inhibited. Phenylacetylene concentrations above 100 microM inhibited more than 90% of sMMO activity in Methylococcus capsulatus Bath and Methylosinus trichosporium OB3b. In contrast, activity of pMMO in M. trichosporium OB3b, M. capsulatus Bath, Methylomicrobium album BG8, Methylobacter marinus A45 and Methylomonas strain MN was still measurable at phenylacetylene concentrations up to 1,000 microM. AMO of Nitrosococcus oceanus has more sequence similarity to pMMO than to AMO of N. europaea. Correspondingly, AMO in N. oceanus was also measurable in the presence of 1,000 microM phenylacetylene. Measurement of oxygen uptake indicated that phenylacetylene acted as a specific and mechanistic-based inhibitor of whole-cell sMMO activity; inactivation of sMMO was irreversible, time dependent, first order and required catalytic turnover. Corresponding measurement of oxygen uptake in whole cells of methanotrophs expressing pMMO showed that pMMO activity was inhibited by phenylacetylene, but only if methane was already being oxidized, and then only at much higher concentrations of phenylacetylene and at lower rates compared with sMMO. As phenylacetylene has a high solubility and low volatility, it may prove to be useful for monitoring methanotrophic and nitrifying activity as well as identifying the form of MMO predominantly expressed in situ.     

Screening of obligate methanotrophs for soluble methane monooxygenase genes

A 5.8 kb fragment of chromosomal DNA from Methylococcus capsulatus (Bath) containing genes encoding the soluble methane monooxygenase enzyme complex was used as a probe for the detection of soluble monooxygenase genes in a number of representative strains of obligate methanotrophs. Only type II methanotrophs of the genus Methylosinus were found to contain homologues to the Methylococcus gene probe. This probe was also used successfully to detect soluble methane monooxygenase genes in a variety of methanotrophs by colony hybridizations.     

Substrate specificity of soluble methane monooxygenase. Mechanistic implications

Following the example set by studies of the mechanistic aspects of the substrate specificity of various cytochrome P-450 enzymes, we have undertaken a parallel investigation of the soluble methane monooxygenase from Methylococcus capsulatus (Bath). Soluble methane monooxygenase is a multicomponent enzyme with a broad substrate specificity. Using substrates previously tested with cytochrome P-450 enzymes and using purified enzyme preparations, this work indicates that soluble methane monooxygenase has a similar oxidative reaction mechanism to cytochrome P-450 enzymes. The evidence suggests that soluble methane monooxygenase oxidizes substrates via a nonconcerted reaction mechanism (hydrogen abstraction preceding hydroxylation) with radical or carbocation intermediates. Aromatic hydroxylation proceeds by epoxidation followed by an NIH shift.     

A rapid fluorescence-based assay for detecting soluble methane monooxygenase

A fluorescence-based assay was developed to estimate soluble methane monooxygenase (sMMO) activity in solution. Whole cells of Methylosinus trichosporium OB3b expressing sMMO were used to oxidize various compounds to screen for fluorescent products. Of the 12 compounds tested, only coumarin yielded a fluorescent product. The UV absorbance spectrum of the product matches that of 7-hydroxycoumarin, and this identification was confirmed by 13C-NMR spectroscopy. The dependence of the fluorescent reaction on sMMO activity was investigated by pre-incubation with acetylene, a known inhibitor of sMMO activity. Apparent kinetic parameters for whole cells were determined to be Km(app)=262 microM and Vmax(app)=821 nmol 7-hydroxycoumarin min(-1) mg protein(-1). The rate of coumarin oxidation by sMMO correlates well with those of trichloroethylene degradation and naphthalene oxidation. Advantages of the fluorescence-based coumarin oxidation assay over the naphthalene oxidation assay include a more stable product, direct detection of the product without additional reagents, and greater speed and convenience.     

Substrate binding and C-H bond activation in the soluble methane monooxygenase hydroxylase

 The selective oxidation of CH₄ to CH₃OH is a conceptually simple, yet functionally difficult, chemical transformation. In nature, this reaction is performed by methane monooxygenases, the soluble class of which employ carboxylate-bridged dinuclear iron centers to activate dioxygen. The process by which small molecules access the active site of the sMMO hydroxylase, the structures of intermediates in the catalytic reaction cycle, and mechanistic details about the attack on the C–H bond are subjects of intense investigation. In this commentary, we present our current views on exogenous ligand binding and dioxygen activation at the active site and the mechanism of alkane hydroxylation. Received: 20 October 1997 / Accepted: 26 February 1998     

Applications of a colorimetric plate assay for soluble methane monooxygenase activity

[This corrects the article on p. 2235 in vol. 58.].     

Two-step concerted mechanism for methane hydroxylation on the diiron active site of soluble methane monooxygenase

A new concerted mechanism is proposed for the conversion of methane to methanol on intermediate Q of soluble methane monooxygenase (sMMO), the active site of which is considered to involve an Fe2(mu-O)2 diamond core. A hybrid density functional theory (DFT) method is used for our mechanistic study on the important reactivity of the bare FeO+ complex and a diiron model of intermediate Q. The reaction pathway for the methane hydroxylation on the diiron complex is essentially identical to that for the gas-phase reaction by the bare FeO+ complex. Methane is highly activated on the dinuclear iron model through the formation of a methane complex, in which a coordinatively unsaturated iron plays a central role in the bonding interaction between the diiron model and substrate methane. A H atom abstraction via a four-centered transition state and a recombination of the OH and CH3 groups via a three-centered transition state successively occur on the dinuclear iron-oxo species, leading to the formation of a methanol complex that corresponds to intermediate T. These electronic processes take place in a concerted manner. Our mechanism for methane hydroxylation by sMMO is different from the radical mechanism that has been widely accepted for enzymatic hydrocarbon hydroxylation, especially by cytochrome P450.     

Use of allylthiourea to produce soluble methane monooxygenase in the presence of copper

Methanotrophs expressing soluble methane monooxygenase (sMMO) may find use in a variety of industrial applications. However, sMMO expression is strongly inhibited by copper, and the growth rate may be limited by the aqueous solubility of methane. In this study, addition of allylthiourea decreased intracellular copper in Methylosinus trichosporium OB3b, allowing sMMO production at Cu/biomass ratios normally not permitting sMMO synthesis. The presence of about 1.5 μmoles intracellular Cu g⁻¹ dry biomass resulted in sMMO activity of about 250 μmoles 1-napthol formed per hour gram dry biomass whether this intracellular Cu concentration was achieved by Cu limitation or by allylthiourea addition. No loss of sMMO activity occurred when the growth substrate was switched from methane to methanol when allylthiourea had been added to growth medium containing copper. Addition of copper to medium that was almost copper-free increased the yield of dry biomass from methanol from 0.20 to 0.36 g g⁻¹, demonstrating that some copper was necessary for good growth. This study demonstrated a method by which sMMO can be produced by M. trichosporium OB3b while growing on methanol in copper-containing medium.     

Applications of a colorimetric plate assay for soluble methane monooxygenase activity.

A straightforward method is described for screening methanotrophic colonies for soluble methane monooxygenase (sMMO) activity on solid media. Such activity results in the development of a colored complex between 1-naphthol, which is formed when sMMO reacts with naphthalene, and o-dianisidine (tetrazotized). Methanotrophic colonies expressing sMMO turned deep purple when exposed successively to naphthalene and o-dianisidine. The method was evaluated within the contexts of two potential applications. The first was for the enumeration of Methylosinus trichosporium OB3b in a methane-amended, unsaturated soil column dedicated to vinyl chloride treatment. The second application was for the isolation and enumeration of sMMO-bearing methanotrophs from sanitary landfill soils. The technique was effective in both applications.     

Production of soluble methane monooxygenase during growth of Methylosinus trichosporium on methanol

Soluble methane monooxygenase (sMMO) can degrade many chlorinated and aromatic pollutants. It is produced by certain methanotrophs such as Methylosinus trichosporium when grown on methane under copper limitation but, due to its low aqueous solubility, methane cannot support dense biomass growth. Since it is water soluble, methanol may be a more attractive growth substrate, but it is widely believed that sMMO is not produced on methanol. In this study, when the growth-limiting substrate was switched from methane to methanol, in the presence of the particulate MMO inhibitor, allylthiourea, growth of M. trichosporium OB3b continued unabated and sMMO activity was completely retained. When allylthiourea was then removed, sMMO activity was maintained for an additional 24 generations, albeit at a slightly lower level due to the presence of 0.70 microM of Cu(2+) in the feed medium. While a biomass density of only 2 g l(-1) could be obtained on methane, 7.4 g l(-1) was achieved by feeding methanol exponentially, and 29 g l(-1) was obtained using a modified feeding strategy employing on-line carbon dioxide production measurement. It was concluded that methanol can be employed to produce large amounts of M. trichosporium biomass containing sMMO.     

Applications of a colorimetric plate assay for soluble methane monooxygenase activity.

A straightforward method is described for screening methanotrophic colonies for soluble methane monooxygenase (sMMO) activity on solid media. Such activity results in the development of a colored complex between 1-naphthol, which is formed when sMMO reacts with naphthalene, and o-dianisidine (tetrazotized). Methanotrophic colonies expressing sMMO turned deep purple when exposed successively to naphthalene and o-dianisidine. The method was evaluated within the contexts of two potential applications. The first was for the enumeration of Methylosinus trichosporium OB3b in a methane-amended, unsaturated soil column dedicated to vinyl chloride treatment. The second application was for the isolation and enumeration of sMMO-bearing methanotrophs from sanitary landfill soils. The technique was effective in both applications.     

Component interactions in the soluble methane monooxygenase system from Methylococcus capsulatus (Bath).

The soluble methane monooxygenase system of Methylococcus capsulatus (Bath) includes three protein components: a 251-kDa non-heme dinuclear iron hydroxylase (MMOH), a 39-kDa iron-sulfur- and FAD-containing reductase (MMOR), and a 16-kDa regulatory protein (MMOB). The thermodynamic stability and kinetics of formation of complexes between oxidized MMOH and MMOB or MMOR were measured by isothermal titration calorimetry and stopped-flow fluorescence spectroscopy at temperatures ranging from 3.3 to 45 degrees C. The results, in conjunction with data from equilibrium analytical ultracentrifugation studies of MMOR and MMOB, indicate that free MMOR and MMOB exist as monomers in solution and bind MMOH with 2:1 stoichiometry. The role of component interactions in the catalytic mechanism of sMMO was investigated through simultaneous measurement of oxidase and hydroxylase activities as a function of varied protein component concentrations during steady-state turnover. The partitioning of oxidase and hydroxylase activities of sMMO is highly dependent on both the MMOR concentration and the nature of the organic substrate. In particular, NADH oxidation is significantly uncoupled from methane hydroxylation at MMOR concentrations exceeding 20% of the hydroxylase concentration but remains tightly coupled to propylene epoxidation at MMOR concentrations ranging up to the MMOH concentration. The steady-state kinetic data were fit to numerical simulations of models that include both the oxidase activities of free MMOR and of MMOH/MMOR complexes and the hydroxylase activity of MMOH/MMOB complexes. The data were well described by a model in which MMOR and MMOB bind noncompetitively at distinct interacting sites on the hydroxylase. MMOB manifests its regulatory effects by differentially accelerating intermolecular electron transfer from MMOR to MMOH containing bound substrate and product in a manner consistent with its activating and inhibitory effects on the hydroxylase.     

Electron transfer reactions in the soluble methane monooxygenase of Methylococcus capsulatus (Bath)

Aerobic stopped-flow experiments have confirmed that component C is the methane monooxygenase component responsible for interaction with NADH. Reduction of component C by NADH is not the rate-limiting step for component C in the methane monooxygenase reaction. Removal and reconstitution of the redox centres of component C suggest a correlation between the presence of the FAD and Fe2S2 redox centres and NADH: acceptor reductase activity and methane monooxygenase activity respectively, consistent with the order of electron flow: NADH----FAD----Fe2S2----component A. This order suggests that component C functions as a 2e-1/1e-1 transformase, splitting electron pairs from NADH for transfer to component A via the one-electron-carrying Fe2S2 centre. Electron transfer has been demonstrated between the reductase component, component C and the oxygenase component, component A, of the methane monooxygenase complex from Methylococcus capsulatus (Bath) by three separate methods. This intermolecular electron transfer step is not rate-determining for the methane monooxygenase reaction. Intermolecular electron transfer was independent of component B, the third component of the methane monooxygenase. Component B is required to switch the oxidase activity of component A to methane mono-oxygenase activity, suggesting that the role of component B is to couple substrate oxidation to electron transfer, via the methane monooxygenase components.     

Identification of the gene encoding the regulatory protein B of soluble methane monooxygenase

Abstract Purification of the regulatory protein B of the soluble methane monooxygenase complex from Methylococcus capsulatus (Bath) has revealed that the organism contains two forms of this protein, one of which appears to be a carboxy-terminal truncate. Protein sequencing has confirmed the identity of these two proteins and allowed the identification of the gene encoding protein B on the methane monooxygenase gene cluster.     

Optimization and maintenance of soluble methane monooxygenase activity inMethylosinus trichosporium OB3b

Soluble methane monooxygenase (sMMO) maximization studies were carried out as part of a larger effort directed towards the development and optimization of an aqueous phase, multistage, membrane bioreactor system for treatment of polluted groundwater. A modified version of the naphthalene oxidation assay was utilized to determine the effects of methane:oxygen ratio, nutrient supply, and supplementary carbon sources on maximizing and maintaining sMMO activity inMethylosinus trichosporium OB3b.Methylosinus trichosporium OB3b attained peak sMMO activity (275–300 nmol of naphthol formed h^–1 mg of protein^–1 at 25°C) in early stationary growth phase when grown in nitrate mineral salts (NMS) medium. With the onset of methane limitation however, sMMO activity rapidly declined. It was possible to define a simplified nitrate mineral salts (NMS) medium, containing nitrate, phosphate and a source of iron and magnesium, which allowed reasonably high growth rates (_max 0.08 h^–1) and growth yields (0.4–0.5 g cells/g CH₄) and near maximal activities of sMMO. In long term batch culture incubations sMMO activity reached a stable plateau at approximately 45–50% of the initial peak level and this was maintained over several weeks. The addition of d-biotin, pyridoxine, and vitamin B₁₂ (cyanocobalamin) increased the activity level of sMMO in actively growing methanotrophs by 25–75%. The addition of these growth factors to the simplified NMS medium was found to increase the plateau sMMO level in long term batch cultures up to 70% of the original peak activity.Abbreviations sMMO soluble methane monooxygenase - pMMO particulate methane monooxygenase - NMS nitrate mineral salts - TCE trichloroethene - NADH reduced nicotinamide adenine dinucleotide     

Improved system for protein engineering of the hydroxylase component of soluble methane monooxygenase

Soluble methane monooxygenase (sMMO) of Methylosinus trichosporium OB3b is a three-component oxygenase that catalyses the O(2)- and NAD(P)H-dependent oxygenation of methane and numerous other substrates. Despite substantial interest in the use of genetic techniques to study the mechanism of sMMO and manipulate its substrate specificity, directed mutagenesis of active-site residues was previously impossible because no suitable heterologous expression system had been found for expression in a highly active form of the hydroxylase component, which is an (alphabetagamma)(2) complex containing the binuclear iron active site. A homologous expression system that enabled the expression of recombinant wild-type sMMO in a derivative of M. trichosporium OB3b from which the chromosomal copy of the sMMO-encoding operon had been partially deleted was previously reported. Here we report substantial development of this method to produce a system for the facile construction and expression of mutants of the hydroxylase component of sMMO. This new system has been used to investigate the functions of Cys 151 and Thr 213 of the alpha subunit, which are the only nonligating protonated side chains in the hydrophobic active site. Both residues were found to be critical for the stability and/or activity of sMMO, but neither was essential for oxygenation reactions. The T213S mutant was purified to >98% homogeneity. It had the same iron content as the wild type and had 72% wild-type activity toward toluene but only 17% wild-type activity toward propene; thus, its substrate profile was significantly altered. With these results, we have demonstrated proof of the principle for protein engineering of this uniquely versatile enzyme.