Extrachromosomal DNA isolated from tomato big bud and Candidatus Phytoplasma australiense phytoplasma strains

The nucleotide sequences of two extrachromosomal elements from tomato big bud (TBB) and one extrachromosomal element from Candidatus Phytoplasma australiense (Ca. P. australiense) phytoplasmas were determined. Both TBB plasmids (3319 and 4092 bp) contained an open reading frame ( approximately 570 bp) with homology to the rolling circle replication initiator protein (Rep). This gene was shorter than the rep genes identified from other phytoplasma plasmids, geminiviruses and bacterial plasmids. Both TBB extrachromosomal DNAs (eDNAs) encoded a putative DNA primase (dnaG) gene, a chromosomal gene required for DNA replication and which contains the conserved topoisomerase/primase domain. We speculate that the replication mechanism for the TBB phytoplasma eDNA involves the dnaG gene instead of the rep gene. The Ca. P. australiense eDNA (3773 bp) was shown to be circular and contained four open reading frames. The rep gene was encoded on ORF 1 and had homology to both plasmid (pLS1) and geminivirus-like domains.     

Nucleotide sequence analysis of small cryptic plasmid pGP2 from <Emphasis Type="Italic">Acetobacter estunensis</Emphasis>

Complete nucleotide sequence of plasmid pGP2 from Acetobacter estunensis GP2 was identified after initial cloning of EcoRI fragment followed by preparation of deletion derivatives. Its size was defined to 2,797 bp and several sites for several restriction enzymes were revealed by DNA sequencing. Sequence analysis predicts three putative open reading frames (ORFs). ORF1 shows significant identity with the bacterial excinuclease α-subunit, ORF2 is a putative replication protein with low similarity with other Acetobacter plasmid’s replication proteins, and ORF3 encodes a class B acid phosphatase/phosphotransferase. The replication module comprises a DnaA box like sequence, direct repeats, a potential prokaryotic promoter and a rep gene. The rep module is similar with several θ-replicating, iteron-containing modules from plasmids, suggesting pGP2 replication may follow the same course. Any phenotypic character determinant gene is absent in pGP2, suggesting this plasmid to be cryptic. However, a pGP2 derivative plasmid, containing the putative pGP2 rep region, can replicate and is stably maintained in Acetobacter and Escherichia coli strains; it can also carry foreign DNA fragments. Thus, pGP2-X could serve as a cloning shuttle vector between these bacteria. Prepared deletion derivatives of plasmid pGP2 suggested that Rep protein is essential for plasmid replication in host bacteria. In its natural host, A. estunensis GP2, pGP2 maintains a four-times lower copy number than in E. coli.     

Two enhancer elements for DNA replication of pSC101, par and a palindromic binding sequence of the Rep protein.

The minimal replication origin (ori) of the plasmid pSC101 has been previously defined as an approximately 220-bp region by using plasmids defective in the par region, which is a cis-acting determinant of plasmid stability. This ori region contains the DnaA binding sequence, three repeated sequences (iterons), and an inverted repeat (IR) element (IR-1), one of the binding sites of an initiator protein, Rep (or RepA). In the present study, we show that plasmids containing par can replicate at a nearly normal copy number in the absence of IR-1 but still require a region (the downstream region) between the third iteron and IR-1. Because par is dispensable in plasmids retaining IR-1, par and IR-1 can compensate each other for efficient replication. The region from the DnaA box to the downstream region can support DNA replication at a reduced frequency, and it is designated "core-ori." Addition of either IR-1 or par to core-ori increases the copy number of the plasmid up to a nearly normal level. However, the IR-1 element must be located downstream of the third iteron (or upstream of the rep gene) to enhance replication of the plasmid, while the par region, to which DNA gyrase can bind, functions optimally regardless of its location. Furthermore, the enhancer activity of IR-1 is dependent on the helical phase of the DNA double helix, suggesting that the Rep protein bound to IR-1 stimulates the activation of ori via its interaction with another factor or factors capable of binding to individual loci within ori.     

Plasmid transformation of Azotobacter vinelandii OP

Azotobacter vinelandii OP which had been naturally induced to competence by growth in iron- and molybdenum-limited medium was transformed with the broad-host-range cloning vector pKT210. However, the transformation frequency at nearly saturating levels of DNA was 1000-fold lower for pKT210 than for a single chromosomal DNA marker (nif+). Plasmid- and chromosomal-DNA-mediated transformation events were competitive, magnesium-dependent, 42 degrees C-sensitive processes specific to double-stranded DNA, suggesting a common mechanism of DNA binding and uptake. The low frequency of plasmid transformation was not related to restriction of transforming DNA or to the growth period allowed for phenotypic expression. Covalently-closed-circular and open-circular forms of pKT210 transformed cells equally well whereas EcoRI- or HindIII-linearized pKT210 transformed cells with two to three times greater efficiency. Genetic transformation was enhanced 10- to 50-fold when pKT210 contained an insert fragment of A. vinelandii nif DNA, indicating that A. vinelandii possessed a homology-facilitated transformation system. However, all transformants failed to maintain the plasmid-encoded antibiotic resistance determinants, and extrachromosomal plasmid DNA was not recovered from these cells. Flush-ended pKT210 was not active in transformation; however, competent cells were transformed to Nif+ by HincII-digested plasmid DNA containing the cloned A. vinelandii nif-10 marker.     

A 37 X 10(3) molecular weight plasmid-encoded protein is required for replication and copy number control in the plasmid pSC101 and its temperature-sensitive derivative pHS1

Nucleotide sequences were determined for a region essential for autonomous replication and partitioning of pSC101, a plasmid whose replication is dependent on the Escherichia coli dnaA gene product. The essential replication region contains one long coding sequence, rep101 , for a protein composed of 316 amino acids, and a polypeptide approximately 37 X 10(3) Mr in size was identified as the rep101 gene product. rep101 is preceded by two inverted repeat sequences, three directly repeated sequences and a region of high A + T content containing a sequence similar to the E. coli oriC consensus sequence. Because the lesions in seven replication-deficient insertion mutants, four mutants with increased copy number and one temperature-sensitive replication mutant occur within rep101 , the rep101 gene product must control pSC101 replication and copy number. par, a region adjacent to the replication region, which functions in stable plasmid inheritance, contains several inverted repeat sequences.     

Identification of a plasmid-coded protein required for initiation of ColE2 DNA replication.

The product of the rep gene of ColE2 is required for initiation of ColE2 DNA replication. The rep gene was placed under the control of the promoters, PL and PR, and the heat-labile cl857 repressor of bacteriophage lambda. The Rep protein was identified as a 35 Kd protein by the maxicell method in combination with heat-induced expression. The protein was efficiently expressed from these promoters in unirradiated cells and accumulated up to a few per cent of the total cellular proteins. It was partially purified (about 80% pure) and its properties examined. The amino acid sequence of the amino terminal portion of the partially purified protein agreed well with that predicted from the nucleotide sequence of the rep gene. One of the characteristic features of the rep gene is frequent usage of rare codons, especially those for arginine. The protein specifically stimulated replication of ColE2 DNA but not that of ColE3 DNA in crude cell extracts of Escherichia coli. Specific binding of the protein to plasmid DNA containing the origin region of ColE2 was demonstrated by the filter binding method. Neither endonuclease activity nor topoisomerase activity was detected by using ColE2 DNA.     

DNA sequence analysis of a putative primary replicon from a cryptic plasmid pNM214 of a hydrocarbon utilizing marine <Emphasis Type="Italic">Bacillus</Emphasis> strain NM21

Marine Bacillus strain NM21 isolated from hydrocarbon-contaminated site at Naval Harbour, Mumbai grows on high-speed diesel as a source of carbon and energy. This bacterium harbours four plasmids in it. The smallest plasmid, pNM214 was digested with EcoRI enzyme and cloned in pUC19 vector. The clone Om4 containing largest insert of >3.5 kb was sequenced by primer walking. DNA sequence analysis showed this fragment to be homologous to replication initiation protein (rep) gene and dso (double strand origin) of different plasmids from Bacillus subtilis and Bacillus pumilus species. The putative rep gene sequence of pNM214 showed 74.3–91.6% DNA identity to B. subtilis plasmids (pTA1015, pTA1060 and pTA1040) and 86.3% to 88.9% DNA identity to B. pumilus plasmids (pPL7065, pPL10 and pSH1452). The translated amino acid sequence of rep shows that it contains all the three conserved motifs present in the Rep protein of pC194 family of plasmids. DNA sequence comparison of putative dso of pNM214 with other bacillus plasmids belonging to pC194 group shows that it contains highly conserved nick site sequence 5′-TCTTTTCTTATCTTGATA-3′ and surrounding inverted repeats. Thus, it indicates that pNM214 to be a rolling circle replicating plasmid belonging to the pC194 group. The presence of rep and dso like sequences in the sequenced EcoRI fragment indicate that the cloned fragment contain putative primary replicon of pNM214.     

Molecular characterization of the minimal replicon and the unidirectional theta replication of pSCM201 in extremely halophilic archaea

A 3,463-bp plasmid, pSCM201, was isolated from a halophilic archaeon, Haloarcula sp. strain AS7094. The minimal replicon that is essential and sufficient for autonomous replication and stable maintenance in Haloarcula hispanica was determined by deletion analysis of the plasmid. This minimal replicon ( approximately 1.8 kb) consisted of only two functionally related segments: (i) a putative origin (ori201) containing an AT-rich region and sets of repeats and (ii) an adjacent gene encoding a putative replication initiation protein (Rep201). Electron microscopic observation and Southern blotting analysis demonstrated that pSCM201 replicates via a theta mechanism. Precise mapping of the putative origin suggested that the replication initiated from a fixed site close to the AT-rich region and proceeded unidirectionally toward the downstream rep201 gene, which was further confirmed by electron microscopic analysis of the ClaI-digested replication intermediates. To our knowledge, this is the first unidirectional theta replication plasmid experimentally identified in the domain of archaea. It provides a novel plasmid system to conduct research on archaeal DNA replication.     

Characterization of the gene encoding the beta-lactamase of the psychrophilic marine bacterium Moritella marina strain MP-1

The beta-lactamase gene (mbla) of the psychrophilic marine bacterium Moritella marina strain MP-1 was identified in a previously isolated genomic DNA fragment and it was expressed in Escherichia coli cells. The mbla gene encoded a protein consisting of 287 amino acid residues. Its predicted amino acid sequence showed approximately 50% identity with that of a number of class A beta-lactamases, especially with that of CARB/PSE type of beta-lactamases (carbenicillinases). E. coli transformed with the plasmid containing mbla grew on an ampicillin-containing plate at 37 degrees C but not at 42 degrees C, suggesting that the beta-lactamase of this bacterium is heat-labile.     

Isolation and characterization of a plasmid from Treponema denticola

Agarose gel electrophoresis of whole genomic DNA of the oral spirochaete Treponema denticola has revealed a plasmid-like fraction. Purification and restriction enzyme analysis has confirmed the presence of a 2.6-kb circular plasmid, which has been mapped for restriction sites and cloned into the Escherichia coli plasmid pUC18. Southern blot analysis of genomic T. denticola DNA, using the plasmid as a probe, has shown that the plasmid is present only as an extra-chromosomal element. No plasmid-coded recombinant gene product from a PstI insert in pUC18 has been detected in host cells of E. coli by SDS-PAGE or immunoblotting with polyclonal immune rabbit serum to T. denticola. The discovery of this plasmid may provide a useful tool in the application of new molecular approaches in spirochaetal biology.     

Molecular structure of the replication origin of a Bacillus subtilis (natto) plasmid, pUH1.

The structure of a 2.0-kb BstEII DNA sequence necessary and sufficient for the replication of a 5.7-kb Natto plasmid, pUH1, which is responsible for gamma-polyglutamate production by Bacillus subtilis (natto), has been characterized by using a trimethoprim resistance gene derived from B. subtilis chromosomal DNA as a selective marker. The 2.0-kb DNA sequence contains an open reading frame, rep, stretching for 999 bp; a promoter region for rep expression; and a possible replication origin for the plasmid upstream of the promotor. The predicted Rep protein has highly homologous amino acid sequences with rep14 of pFTB14 in B. amyloliquefaciens, RepB of pUB110, and protein A, which is necessary for pC194 replication in staphylococci throughout the protein molecule, but is not homologous with RepC of staphylococcal plasmid pT181.     

Molecular structure of the replication origin of a Bacillus subtilis (natto) plasmid, pUH1.

The structure of a 2.0-kb BstEII DNA sequence necessary and sufficient for the replication of a 5.7-kb Natto plasmid, pUH1, which is responsible for gamma-polyglutamate production by Bacillus subtilis (natto), has been characterized by using a trimethoprim resistance gene derived from B. subtilis chromosomal DNA as a selective marker. The 2.0-kb DNA sequence contains an open reading frame, rep, stretching for 999 bp; a promoter region for rep expression; and a possible replication origin for the plasmid upstream of the promotor. The predicted Rep protein has highly homologous amino acid sequences with rep14 of pFTB14 in B. amyloliquefaciens, RepB of pUB110, and protein A, which is necessary for pC194 replication in staphylococci throughout the protein molecule, but is not homologous with RepC of staphylococcal plasmid pT181.     

Atypical location of double-strand origin of replication (nic site) on the plasmid pGA1 from Corynebacterium glutamicum

The double-strand origin of replication (dso) of the rolling-circle-replicating (RC) plasmid pGA1 from Corynebacterium glutamicum was analyzed using the runoff DNA synthesis assay. The site- and strand-specific breakage of double-stranded plasmid DNA, representing the nic site of dso, was localized precisely within the sequence 5'-CTGG decreases AT-3' in the distal part of the pGA1 rep gene. This location of dso differs from the dso positions found on other RC plasmids and is in agreement with the classification of the plasmid pGA1 into a new group of RC plasmids.     

The Effect of a Continuous Supply of Betaine on the Degradation of Betaine in the Rumen of Dairy Cows

The β-lactamase gene (mbla) of the psychrophilic marine bacterium Moritella marina strain MP-1 was identified in a previously isolated genomic DNA fragment and it was expressed in Escherichia coli cells. The mbla gene encoded a protein consisting of 287 amino acid residues. Its predicted amino acid sequence showed approximately 50% identity with that of a number of class A β-lactamases, especially with that of CARB/PSE type of β-lactamases (carbenicillinases). E. coli transformed with the plasmid containing mbla grew on an amplicillin-containing plate at 37°C but not at 42°C, suggesting that the β-lactamase of this bacterium is heat-labile.     

Biocontrol of the sugarcane borer Eldana saccharina by expression of the Bacillus thuringiensis cry1Ac7 and Serratia marcescens chiA genes in sugarcane-associated bacteria

The cry1Ac7 gene of Bacillus thuringiensis strain 234, showing activity against the sugarcane borer Eldana saccharina, was cloned under the control of the tac promoter. The fusion was introduced into the broad-host-range plasmid pKT240 and the integration vector pJFF350 and without the tac promoter into the broad-host-range plasmids pML122 and pKmM0. These plasmids were introduced into a Pseudomonas fluorescens strain isolated from the phylloplane of sugarcane and the endophytic bacterium Herbaspirillum seropedicae found in sugarcane. The ptac-cry1Ac7 construct was introduced into the chromosome of P. fluorescens using the integration vector pJFF350 carrying the artificial interposon Omegon-Km. Western blot analysis showed that the expression levels of the integrated cry1Ac7 gene were much higher under the control of the tac promoter than under the control of its endogenous promoter. It was also determined that multicopy expression in P. fluorescens and H. seropedicae of ptac-cry1Ac7 carried on pKT240 caused plasmid instability with no detectable protein expression. In H. seropedicae, more Cry1Ac7 toxin was produced when the gene was cloned under the control of the Nm(r) promoter on pML122 than in the opposite orientation and bioassays showed that the former resulted in higher mortality of E. saccharina larvae than the latter. P. fluorescens 14::ptac-tox resulted in higher mortality of larvae than did P. fluorescens 14::tox. An increased toxic effect was observed when P. fluorescens 14::ptac-tox was combined with P. fluorescens carrying the Serratia marcescens chitinase gene chiA, under the control of the tac promoter, integrated into the chromosome.     

Analysis of replication region of the cryptic plasmid pAG20 from Acetobacter aceti 3620

The DNA sequence of small cryptic plasmid pAG20 in Acetobacter aceti was determined at 3064 bp with 51.6% GC pairs. The plasmid encoded a 186 amino acid protein which is important for plasmid replication in Gram-negative bacteria except Escherichia coli. Two 21 bp large direct repeat sequence 1 and two 13 bp direct repeat sequence 2 were determined in the regulation region upstream from gene encoded Rep protein. Vector pAG24 with kanamycin gene and two deletion derivatives pAG25 and pAG26 without rep gene from plasmid pAG20 were constructed. Plasmid pAG24 was replicated in a broad host range like E. coli, Acetobacter pasteurianus, A. aceti, Comanomonas spp., Serratia marcescens, and Shigella spp.     

Partition of unit-copy miniplasmids to daughter cells. I. P1 and F miniplasmids contain discrete, interchangeable sequences sufficient to promote equipartition

Hybrids formed by insertion of the plasmid maintenance regions of P1 or F into a lambda delta att vector form stable unit-copy plasmids in their Escherichia coli host. They must therefore both be substrates for an accurate cellular partition apparatus that ensures that all daughter cells inherit a plasmid copy. Analysis of deletion mutants of both types of hybrid showed that, although the P1 and F plasmid maintenance regions differ in sequence and specificity, they are similar in general organization. Each contains an approximately 3 X 10(3) base-pair region that is essential for replication (rep) and an adjacent but separable 3 X 10(3) base-pair region that is essential for the stability of plasmid maintenance (par). Each par region is thought to specify the recognition of the plasmid as a substrate for equipartition. The deletion mutants provide sources of isolated rep and par sequences from both P1 and F DNA. These elements were then used to construct composite plasmids with novel combinations and arrangements of rep and par sequences. Heterologous constructions containing P1 rep and F par or F rep and P1 par sequences were maintained faithfully. We conclude that par regions are both necessary and sufficient to promote equipartition of replicating plasmid DNA. This activity is exerted only in cis but otherwise seems to be independent of the position or orientation of the par sequences within the DNA. Both P1 and F par regions include DNA sequences (incB of P1, incD of F) that we propose are analogues of the centromeres of eukaryotic chromosomes. The remaining portions of the par regions are known to encode protein products that, we believe, act at the inc sites. Extra copies of these inc sites appear to exert incompatibility by competition for the cellular partition apparatus.     

Characteristics and transformation of Zymomonas mobilis with plasmid pKT230 by electroporation

Transformation of Zymomonas mobilis with plasmid pKT230 by electroporation was achieved with a transformation efficiency of 9.0?±?1.8?×?10³ per μg plasmid DNA. The growing state of the host cells before transformation, the RC time constant for pulsing at the optimal electric field strength (7.5?kV/cm), the plasmid concentration and the post-incubation time prior to outgrowth in RM medium were the sensitive factors influencing the efficiency of the transformation. The data from batch cultures revealed that the plasmid-harboring cells, Z. mobilis (pKT230), had the same growth pattern as plasmid-free cells. The yield factors of biomass production and ethanol formation by Z. mobilis were nearly unchanged after being transformed and grown in the selective medium where the gene for antibiotic resistance was expressed. The results suggested that the plasmid pKT230 was stable in Z. mobilis and qualified for being a cloning vector in the construction of a recombinant ethanol-producer.     

Genetic and physical map of a P1 miniplasmid

The prophage form of bacteriophage P1 is a unit-copy plasmid which is maintained with great fidelity in its Escherichia coli host. The plasmid maintenance functions of P1 are clustered in one region of the genome. An 11.5-kilobase fragment from this region has been cloned into a lambda delta att vector and promotes stable unit-copy plasmid maintenance. The properties of the lambda vector facilitated the isolation of deletion mutants affecting the P1 DNA. Twenty-eight deletion mutants were isolated, and their lesions were mapped by physical techniques. The genetic properties of the mutants with respect to plasmid replication, stability of plasmid maintenance, and ability to exert incompatibility effects against P1 and P7 plasmids were determined. These properties, along with those of several subfragments of the P1 insert cloned into high-copy-number plasmid vectors, allow the construction of an unambiguous genetic and physical map of the maintenance functions. A region of less than 3 kilobases, the rep region, is essential for plasmid replication and contains the incA incompatibility determinant within an 800-base-pair segment. Immediately adjacent to rep is a second region of approximately 3 kilobases which is required for stable plasmid maintenance, but not replication. This region, par, contains a second incompatibility element incB which is approximately 1 kilobase in size. The par region appears to specify equipartition of plasmid copies to daughter cells during cell division.