The use of streptavidin-biotin interaction for preparation of reagents for complement-dependent liposome immunoassay of proteins: detection of latrotoxin.

We have developed liposome sensitization by a protein, latrotoxin (LT), using immobilization of biotinylated LT via streptavidin with biotinylated phosphatidylethanolamine contained in liposomes. The use of such liposomes in the complement-dependent homogeneous liposome immune lysis assay (LILA) has allowed us to detect in the test sample as little as 2 micrograms/ml of polyclonal and 50-100 ng/ml of monoclonal IgG and IgM antibodies to LT. LT concentration in solution was determined by inhibition of immune lysis by free LT. The sensitivity of the LT assay varied from 1 x 10(-9) to 5-50 x 10(-9) M when antiserum (polyclonal antibodies) and monoclonal antibodies to LT were correspondingly used. The results show that a streptavidin-biotin spacer can be used to immobilize protein antigens on liposomes for a subsequent application in LILA. The suggested technique greatly simplifies the sensitization procedure and extends the applicability of the LILA.     

A new hydrophobic anchor for the attachment of proteins to liposomal membranes

The model enzyme alpha-chymotrypsin covalently modified by a phosphatidylethanolamine derivative has been attached to liposomal membranes in high yield. A maximal protein/lipid ratio of 5.4 X 10(-3) mol enzyme/mol lipid was achieved.     

Comparative studies of the preparation of immunoliposomes with the use of two bifunctional coupling agents and investigation of in vitro immunoliposome-target cell binding by cytofluorometry and electron microscopy

The two coupling agents SPDP (N-succinimidyl-3-(2-pyridyldithio)propionate) and SATA (N-succinimidyl-S-acetylthioacetate) were compared in their efficiency and feasibility to couple monoclonal antibodies (Abs) via thioether linkage to liposomes functionalized by various lipophilic maleimide compounds like N-(3-maleimidopropionyl)-N2-palmitoyl-L-lysine methyl ester (MP-PL), N-(3-maleimidopropionyl)phosphatidylethanolamide (MP-PE), N6-(6-maleimidocaproyl)-N2-palmitoyl-L-lysine methyl ester (EMC-PL), and N-(6-maleimidocaproyl)phosphatidylethanolamine (EMC-PE). The composition of the liposomes was soy phosphatidylcholine (SPC), cholesterol, maleimide compounds and alpha-tocopherol (1:0.2:0.02:0.01, mol parts), plus N4-oleylcytosine arabinoside (NOAC) as cytostatic prodrug (0.2 mol parts) and a new, lipophilic and highly fluorescent dye N,N'-bis(1-hexylhfetyl)-3,4:9,10-perylenebis(dicarboximid ) (BHPD, 0.006 mol parts). From the maleimide derivatives MP-PL was the most effective in terms of preservation of the coupling activity in dependence of liposome storage. The coupling of the monoclonal A B8-24.3 (mouse IgG2b, MHC class I, anti H-2kb) and IB16-6 (rat IgG2a, anti B16 mouse melanoma) to the drug carrying liposomes was more effective and easier to accomplish with SATA as compared to SPDP. Coupling rates of 60-65% were obtained with SATA at molar ratios of 12 SATA:1 Ab:40 maleimide spacer groups on the surface of one liposome. The highest coupling rates with SPDP were obtained at the ratio of 24 SPDP:1 Ab:40 liposomal maleimide groups, with an Ab binding efficiency of only 20-25%. The optimal in vitro binding conditions to specific target cells (EL4 for B8-24.3-liposomes and B16-F10 for IB16-6-liposomes) were determined by cytofluorometric measurement of the liposomal BHPD fluorescence with SATA linked Abs. Optimal immunoliposome binding to specific epitopes on the target cells was achieved with 1-2 Ab molecules coupled to one liposome, with immunoliposome concentrations of 20-130 nM and with a small incubation volume of 0.3-0.4 ml. The specificity of the binding of B8-24.3-liposomes to EL4 target cells was visualized by scanning electron microscopy. Antibody mediated endocytic uptake of immunoliposomes could be demonstrated by transmission electron microscopy.     

StarD7 behaves as a fusogenic protein in model and cell membrane bilayers

StarD7 is a surface active protein, structurally related with the START lipid transport family. So, the present work was aimed at elucidating a potential mechanism of action for StarD7 that could be related to its interaction with a lipid-membrane interface. We applied an assay based on the fluorescence de-quenching of BD-HPC-labeled DMPC-DMPS 4:1 mol/mol SUVs (donor liposomes) induced by the dilution with non-labeled DMPC-DMPS 4:1 mol/mol LUVs (acceptor liposomes). Recombinant StarD7 accelerated the dilution of BD-HPC in a concentration-dependent manner. This result could have been explained by either a bilayer fusion or monomeric transport of the labeled lipid between donor and acceptor liposomes. Further experiments (fluorescence energy transfer between DPH-HPC/BD-HPC, liposome size distribution analysis by dynamic light scattering, and the multinuclear giant cell formation induced by recombinant StarD7) strongly indicated that bilayer fusion was the mechanism responsible for the StarD7-induced lipid dilution. The efficiency of lipid dilution was dependent on StarD7 electrostatic interactions with the lipid-water interface, as shown by the pH- and salt-induced modulation. Moreover, this process was favored by phosphatidylethanolamine which is known to stabilize non-lamellar phases considered as intermediary in the fusion process. Altogether these findings allow postulate StarD7 as a fusogenic protein.     

脂质体通透性与脂多型性关系的研究

本文以TPE和TPE/DOPE(1:1.mol:mol)制成包裹荧光分子calcein的脂质体,通过测量荧光强度随扫描温度的变化,探讨了脂质体通透性与脂多型性之间的关系.结果表明,在不发生双层相(L)变成六角形Ⅱ相(H)相转变时,脂质体悬液的荧光强度不增加;当发生该转变时,脂质体悬液的荧光强度开始增加;完成该相转变后,脂质体悬液的荧光强度仍继续增加.据此,我们认为:脂质体的通透性与脂的多型性密切相关,当发生L→HⅡ相转变时,脂质体的通透性增加.由于荧光强度的变化对相变非常敏感,我们建议用测量脂质体荧光强度随温度的变化来监测脂质体稀悬液中脂的多型性.     

Interactions of antigen-sensitized liposomes with immobilized antibody: a homogeneous solid-phase immunoliposome assay

Dioleoyl phosphatidylethanolamine (DOPE) does not form stable bilayer liposomes at room temperature and neutral pH. However, stable unilamellar liposomes could be prepared by mixing DOPE with a minimum of 12% of a haptenated lipid, N-(dinitrophenylaminocaproyl)-phosphatidylethanolamine (DNP-cap-PE). When the liposomes bound to rabbit anti-DNP IgG that had been adsorbed on a glass surface, lysis of the liposome occurred with the release of the contents into the medium as judged by the fluorescence enhancement of an entrapped self-quenching dye, calcein. On the other hand, incubation of the same liposomes with glass surfaces coated with normal rabbit IgG had little effect. In addition, free anti-DNP IgG induced aggregation of the liposomes but did not cause any dye release. Liposomes composed of dioleoyl phosphatidylcholine (DOPC) and DNP-cap-PE did not lyse when added to the glass surfaces coated with either anti-DNP IgG or normal IgG. A likely mechanism for liposome lysis is that the DNP-cap-PE laterally diffuse to the contact area between the liposome and the glass. Binding of the haptenated lipid with the immobilized and multivalent antibody trap the haptenated lipids in the contact area. As a result of lateral phase separation, lipids may undergo the bilayer to hexagonal phase transition, leading to the leakage of the entrapped dye. Because both the free hapten and the free antibody inhibited the liposome leakage, this process could be used to assay for the free hapten or antibody. We have shown that inhibition assays performed by using this principle can easily detect 10 pmol of free DNP-glycine in 40 microliter. Furthermore, by substituting human glycophorin A, a transmembrane glycoprotein, for the lipid hapten, we have demonstrated that this assay system is also applicable to detect protein antigen with a sensitivity of sub-nanogram level.     

Lateral diffusion of lipids and glycophorin in solid phosphatidylcholine bilayers. The role of structural defects

The lateral mobility of the lipid analog N-4-nitrobenzo-2-oxa-1,3 diazole phosphatidylethanolamine and of the integral protein glycophorin in giant dimyristoylphosphatidylcholine vesicles was studied by the photobleaching technique. Above the temperature of the chain-melting transition (Tm = 23 degrees C), the diffusion coefficient, Dp, of the protein [Dp = (4 +/- 2) X 10(-8) cm2/s at 30 degrees C] was within the experimental errors equal to the corresponding values DL of the lipid analog. In the P beta 1 phase the diffusion of lipid and glycophorin was studied as a function of the probe and the protein concentration. (a) At low lipid-probe content (cL less than 5 mmol/mol of total lipid), approximately 20% of the probe diffuses fast (D approximately equal to 10(-8) - 10(-9) cm2/s), while the mobility of the rest is strongly reduced (D less than 10(-10) cm2/s). At a higher concentration (cp approximately 20 mmol), all probe is immobilized (D less than 10(-10) cm2/s). (b) Incorporation of glycophorin up to cp = 0.4 mmol/mol of total lipid leads to a gradual increase of the fraction of mobile lipid probe due to the lateral-phase separation into a pure P beta 1 phase and a fraction of lipid that is fluidized by strong hydrophilic lipid-protein interaction. (c) The diffusion of the glycophorin molecules is characterized by a slow and a fast fraction. The latter increases with increasing protein content, which is again due to the lateral-phase separation caused by the hydrophilic lipid-protein interaction. The results are interpreted in terms of a fast transport along linear defects in the P beta 1 phase, which form quasi-fluid paths for a nearly one dimensional and thus very effective transport. Evidence for this interpretation of the diffusion measurements is provided by freeze-fracture electron microscopy.     

再生丝素固定的酶标免疫传感器的研究

所研究的酶标免疫传感器是采用再生丝素将待测抗原 (兔IgG)固定在石墨电极表面 ,选用抗体 (山羊抗兔IgG HRP)与其识别结合。利用H₂O₂ 将抗原抗体结合的电位响应信号放大采用直接电位法检测IgG的浓度。该传感器测定IgG的最低浓度可达 1.2×10^-10 mol/L ,标准曲线的线形范围在4.1×10^-7～1.2×10^-10 mol/L ,回归方程为: E=-1049+721g[IgG],响应时间为 15s。通过电泳的方法加速抗原抗体的识别结合 ,反应时间由原来的 90min缩短到 3 0min。这种以固定化抗原结合酶标抗体量的多少作为检测抗原标准的新型酶标免疫传感器 ,在临床检测、环境监测、HLA个人身份鉴定等领域都有着广阔的应用前景。     

Amperometric hydrogen peroxide biosensor based on the immobilization of HRP on nano-Au/Thi/poly (p-aminobenzene sulfonic acid)-modified glassy carbon electrode

A novel hydrogen peroxide biosensor was fabricated for the determination of H(2)O(2). The precursor film was first electropolymerized on the glassy carbon electrode with p-aminobenzene sulfonic acid (p-ABSA) by cyclic voltammetry (CV). Then thionine (Thi) was adsorbed to the film to form a composite membrane, which yielded an interface containing amine groups to assemble gold nanoparticles (nano-Au) layer for immobilization of horseradish peroxidase (HRP). The electrochemical characteristics of the biosensor were studied by CV and chronoamperometry. The factors influencing the performance of the resulting biosensor were studied in detail. The biosensor responded to H(2)O(2) in the linear range from 2.6 x 10(-6) mol/L to 8.8 x 10(-3) mol/L with a detection limit of 6.4 x 10(-7) mol/L. Moreover, the studied biosensor exhibited good accuracy and high sensitivity. The proposed method was economical and efficient, making it potentially attractive for the application to real sample analysis.     

Comparison of 9-aminoacridine and atebrine induced changes in optical, electrical and mechanical characteristics of lipid bilayers.

The effects of fluorescent probes 9-aminoacridine (9AA) and atebrine (AT) on physical properties of liposomes and planar bilayer lipid membranes (BLM) were studied. The method of fluorescence spectroscopy and the electrostriction method based on measurement of higher current harmonics were used. At low concentrations (10(-5)-5 x 10(-5) mol/l), 9AA increased fluorescence intensity, while in liposomes from soybean phosphatidylcholine fluorescence quenching occurred at higher probe concentration. Fluorescence quenching occurred over the entire concentration range tested (10(-5)-10(-4) mol/l) in liposomes made from a mixture of egg phosphatidylcholine and cardiolipin. In contrast to 9AA, AT, thanks to its hydrophobic chain, penetrates deeper into the hydrophobic membrane moiety; thus, immobilization of the molecule and an increase in fluorescence intensity was always observed. Probes adsorbed to membranes, leaving their electric capacitance effectively unchanged. Adsorption of charged dye particles induced small changes in transmembrane potential. In the presence of 10(-5) mol/l AT, the modulus of elasticity E perpendicular increased somewhat for soft membranes (E perpendicular approximately 2.5 x 10(7) Pa), whereas it decreased for hard membranes (E perpendicular approximately 5 x 10(7) Pa). pH gradient present on the membrane affected the ability of the dyes to incorporate into the membranes. Our results provide evidence against the proposed model of the quenching mechanism introduced by Rottenberg and Lee (1975).     

The role of interchain disulphide bridges in the conformational stability of human immunoglobulin G1 subclass. Hydrogen-deuterium exchange studies.

The hydrogen-deuterium exchange data of human immunoglobulin G1 (IgG1) are interpreted by assuming fast fluctuations of the protein conformation, through which the peptide groups become exposed to the solvent. The probability of solvent exposure of peptide hydrogens reflects a rather loose conformation for native IgG in comparison with other globular proteins. The probability of solvent exposure is greater than 10(-3) for half of the peptide groups, which shows that the conformational transitions by which these groups are exposed to the solvent are accompanied by changes in standard free energy less than 17 kJ/mol (4 kcal/mol). In the range of pH 6.2-8.45, at 25 degrees C no gross conformational changes are reflected in the hydrogen-deuterium exchange behaviour of the native, the reduced-nonalkylated-reassociated and the reduced-S-alkylated-reassociated IgG1. No difference could be detected in the conformational stability of the native and reoxidised reassociated IgG1 proteins. The lack of inter-subunit disulphide bridges in S-alkylated-reassociated molecules results in an increased conformational motility. This destabilization of protein conformation affects about 90% of the peptide groups covered by the measurements, and corresponds to changes in standard free energy of 8 kJ/mol on the average.     

A spectrophotometric method for determination of fluorophore-to-protein ratios in conjugates of the blue fluorophore 7-amino-4-methylcoumarin-3-acetic acid (AMCA)

7-Amino-4-methylcoumarin-3-acetic acid (AMCA) has been found to be a useful fluorophore for immunofluorescence. The present study describes a spectrophotometric method for determining the ratio of moles AMCA to moles protein (or the f/p ratio) in an AMCA-conjugated IgG. The concentration of a substance absorbing light can be determined spectrophotometrically using Beer's Law: Absorbance = Concentration x Extinction coefficient. From Beer's law, one can derive the following formula for determining the f/p ratio of AMCA-IgG conjugates: f/p = (epsilon 280IgG).A350 - (epsilon 350IgG).A280/(epsilon 350AMCA).A280 - (epsilon 280AMCA).A350 where A is the optical density of the conjugate at the given wavelength and epsilon is the extinction coefficient of a substance at the wavelength specified. Using conjugates of model proteins, it was found that the extinction coefficients of the AMCA moiety of AMCA-conjugated protein were 1.90 x 10(4) at 350 nm and 8.29 x 10(3) at 280 nm. Similarly, it was found that the extinction coefficients of swine IgG were 1.56 x 10(3) at 350 nm and 1.26 x 10(5) at 280 nm. Thus, for AMCA-conjugated swine IgG: f/p = (1.26 x 10(5)).A350 - (1.56 x 10(3)).A280/(1.47 x 10(4)).A280 - (6.42 x 10(3)).A350 [corrected]. Based on this formula, the f/p ratios of some AMCA-IgG conjugates useful for immunohistochemistry have been found to range between 6 and 24.     

Fluorometric immunoassay based on pH-sensitive dye-encapsulating liposomes and gramicidin channels

This article describes a new method for direct fluorometric immunoassay with a liposome array using pH-sensitive dye (BCECF [2',7'-bis(carboxyethyl)-4 or 5-carboxyfluorescein])-encapsulating liposomes immobilized on an avidin slip and gramicidin channels. The liposomes were composed of phosphatidylcholine (PC), cholesterol (Chol), biotinylated phosphatidylethanolamine (B-cap-PE), and recognition sites (1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(2,4-dinitrophenyl) [DNP-PE], Fab' fragment of anti-substance P, and Fab' of anti-neurokinin A). The addition of gramicidin induced release of H(+) ions from the inner solution (pH 5.5) to the outer one (pH 7.8), enhancing fluorescence of BCECF (1.0mM) encapsulated in liposome. The binding of an analyte (anti-dinitrophenyl [anti-DNP], avidin, substance P, or neurokinin A) to the membrane-bound recognition sites caused further enhancement of fluorescence of BCECF due to a local distortion of the bilayer structure that affects the channel kinetics of gramicidin. The intensity of fluorescence from the immobilized liposomes 60 min after the addition of gramicidin (10 ng/ml) increased with an increase in the concentration of anti-DNP ranging from 1.2 x 10(-8) to 1.2 x 10(-6)g/ml, avidin ranging from 1.0 x 10(-8) to 1.0 x 10(-6)g/ml, substance P ranging from 1.0 x 10(-8) to 1.0 x 10(-6)g/ml, and neurokinin A ranging from 1.0 x 10(-8) to 1.0 x 10(-6)g/ml. The direct fluorometric immunoassay with a liposome array is simple and easy to carry out. The intensity of fluorescence emitted from the immobilized liposomes is directly measured after incubation with a sample solution and a gramicidin solution in sequence without washing steps. The assay allows simultaneous quantification of multiple components without labeling of antibody or antigen with a fluorescent tag. The liposome-based assay is discussed in terms of principle, sensitivity, and selectivity.     

Screen-printed electrodes with electropolymerized Meldola Blue as versatile detectors in biosensors

Electropolymerization of Meldola Blue was carried out by cyclic voltammetry in the range from -0.6 to +1.4 V vs. Ag/AgCl, thus defining a new immobilization procedure of the phenoxazine mediator on screen-printed graphite electrodes. Evidence of polymer formation was provided by electrochemical and Fourier transform infrared spectroscopy (FTIR) data. Following polymerization, Meldola Blue preserved the ability to catalyze NADH oxidation allowing to achieve a detection limit of 2.5 x 10(-6) mol l(-1) and a sensitivity of 3713 microA l mol(-1) in amperometric determinations at 0 V vs. Ag/AgCl. In addition, the polymeric mediator was found to facilitate the reduction of hydrogen peroxide in the absence of peroxidase. Typical calibration at -0.1 V vs. Ag/AgCl shows a detection limit of 8.5 x 10(-5) mol l(-1), a sensitivity of 494 microA l mol(-1) and a linear range from 2.5 x 10(-4) to 5 x 10(-3) mol l(-1) hydrogen peroxide.     

The binding of lipid to the lipid-free adenosine triphosphatase protein of sarcoplasmic reticulum.

Dinitrophenylated dipalmitoyl phosphatidylethanolamine and its lyso derivative have been shown to bind to the lipid-free ATPase protein derived from the sarcoplasmic reticulum. The binding of these lipids is accompained by the quenching of up to 95% of the tryptophyl fluorescence of the protein. This effect is reversed by 9-10 mM deoxycholate. The solubility of the lipid-free ATPase protein in the absence of deoxycholate and the solubility of submillimolar concentrations of the dinitrophenylated monopalmitoyl phosphatidylethanolamine anion in aqueous media allowed binding experiments using this lipid ligand to be carried out in a simple buffer system. It is shown that in the case of this lipid the initial phase of the binding process displays an apparent positive co-operatively. Data from the second phase in the saturation of the protein with this lipid is consistent with binding to independent, equivalent, non-interacting sites with a microscopic (intrinsic) association constant of 1.63 x 10(6) M-1, the fluorescence being quenched in the geometric fashion. Altogether a total of about 15 molecules of this lipid may be bound by the protein.     

Dynamics of lipid-protein interactions. Interaction of apolipoprotein A-II from human plasma high density lipoproteins with dimyristoylphosphatidylcholine

ApoA-II and dimyristoylphosphatidylcholine (DMPC) spontaneously associate to give three different complexes whose structures are determined by the initial reactant concentration and by the reaction temperature with respect to Tc (23.9 degrees C), the gel to liquid crystalline transition temperature of DMPC. At an initial lipid to protein ratio of 45/1, a single complex (2.29 x 10(5) daltons) is quantitatively formed at all temperatures between Tc - 4 degrees C and Tc + 6 degrees C. When the 45/1 complex is mixed with DMPC liposomes there is lipid exchange but no net transfer of lipid, so that the structure of the complex remains unaltered. At an initial molar ratio of 100 to 300:1, the reaction scheme is more complex. At 24 degrees C a 240/1 complex (1.5 x 10(6) daltons) is formed from a precursor 75/1 complex (3.43 x 10(5) daltons) if excess (approximately 300 mol/mol) lipid is present. The 75/1 complex exhibits lipid exchange in the presence of added DMPC liposomes at 24 degrees C, and both the 75/1 and the 240/1 complex can be converted to smaller protein-rich complexes in the presence of added apoA-II. These results suggest that the initial lipid/protein ratio and the physical state of a lipid or lipid . protein complex determines the composition and structure of the resulting complex and support the view that lipid-protein interactions are stronger than protein-protein or lipid-lipid interactions.     

Reconstitution of transferrin receptor in mixed lipid vesicles. An example of the role of elastic and electrostatic forces for protein/lipid assembly

We studied the interaction of transferrin receptors (of cell line Molt-4) with mixed model membranes as a function of lipid chain length (phospholipids with C14:0 and C18:1 hydrocarbon chains) and of the surface charge of the membrane using mixtures of C14:0 lecithin (DMPC) with C14:0 phosphatidylglycerol (DMPG) and C14:0 phosphatidylserine (DMPS). Spontaneous self-assembly of receptors and lipids was achieved by freeze-thaw cycles of a codispersion of mixed vesicles and receptors in buffer and subsequent separation of receptor-loaded and receptor-free vesicles by density gradient centrifugation. Information on specific lipid/protein interaction mechanisms was obtained by evaluation of protein-induced shifts of phase boundaries of lipid mixtures by calorimetry and by FTIR spectroscopy of partially deuterated lipid mixtures. The important role (1) of minimizing the elastic forces caused by the mismatch of the lengths of hydrophobic cores of the protein (lp) and the bilayer (lL) and (2) of the electrostatic coupling of protein head groups with the charged membrane/water interface for the lipid/protein self-assembly is established. The electrostatic interaction energy per receptor is about 10(3) kBT (by coupling to about 1000 charged lipids) which is sufficient to overcompensate the elastic energy associated with a mismatch of lp - lL approximately 1.0 nm. The maximum receptor concentration incorporated was measured as a function of membrane surface charge and lipid chain length. The maximum receptor molar fraction varied from xpmax = 5 x 10(-5) for DMPC to xpmax = 4 x 10(-4) for 1:1 DMPC/DMPG; moreover xpmax is higher for DMPS than for DMPG as charged component. For the long-chain lipids, xpmax is higher for a 9:1 DEPE/DEPC mixture [(4.2-9) x 10(-4)] than for pure DEPC (ca. 3.5 x 10(-4)). By decomposition of reconstituted receptors with proteases, we demonstrated the homogeneous orientation of the receptor with its extracellular head group pointing to the convex side of the vesicles.(ABSTRACT TRUNCATED AT 250 WORDS)     

Hydrogen peroxide biosensor based on microperoxidase-11 entrapped in lipid membrane

A highly catalytic activity microperoxidase-11 (MP-11) biosensor for H(2)O(2) was developed to immobilizing the heme peptide in didodecyldimethylammonium bromide (DDAB) lipid membrane. The enzyme electrode thus obtained responded to H(2)O(2) without electron mediator or promoter, at a potential of +0.10 V versus Agmid R:AgCl. A linear calibration curve is obtained over the range from 2.0 x 10(-5) to 2.4 x 10(-3) M. The biosensor responds to hydrogen peroxide in 15 s and has a detection limit of 8 x 10(-7) M (S/N=3) Providing a natural environment with lipid membrane for protein immobilization and maintenance of protein functions is a suitable option for the design of biosensors.     

Monopalmitoylphosphatidylcholine incorporation into human erythrocyte ghost membranes causes protein and lipid immobilization and cholesterol depletion

The effects of lysophosphatidylcholine (lysoPC) on human erythrocyte (RBC) ghost morphology, transmembrane protein and lipid lateral mobilities, and membrane lipid composition were studied in order to elucidate mechanisms by which lysoPC immobilizes ghost membrane components [Golan, D. E., Brown, C. S., Cianci, C. M. L., Furlong, S. T., & Caulfield, J. P. (1986) J. Cell Biol. 103, 819-828]. Under standardized conditions 1.0-1.5 micrograms/mL egg lysoPC lysed 50% of RBCs and induced, in some ghosts, the formation of large patches of wrinkled membrane. Patches exhibited complete immobilization of glycophorin and band 3 and partial immobilization of the phospholipid analogue fluorescein phosphatidylethanolamine (Fl-PE), whereas adjacent smooth membrane areas manifested only partial immobilization of proteins and no immobilization of Fl-PE. Supralytic concentrations of lysoPC induced both progressive, homogeneous wrinkling of RBC ghost membranes and concentration-dependent decreases in the lateral mobilities of glycophorin, band 3, and Fl-PE. Complete immobilization of glycophorin and band 3 occurred at 8.4 micrograms/mL lysoPC and of Fl-PE at 16.8 micrograms/mL lysoPC. Monopalmitoylphosphatidylcholine (MPPC), the major component of egg lysoPC, induced both membrane wrinkling and a concentration-dependent decrease in Fl-PE mobility, with complete immobilization at 10 micrograms/mL. Other synthetic lysoPCs did not completely immobilize Fl-PE, although some caused membrane wrinkling. MPPC was incorporated into ghost membranes with a linear dependence (r = 0.97) on MPPC concentration. Relative to total membrane lipid, the lysoPC mole fraction increased from 0.2 +/- 0.1% at 0 micrograms/mL MPPC to 25 +/- 2% at 16 micrograms/mL MPPC.(ABSTRACT TRUNCATED AT 250 WORDS)     

Quantum dots-bienzyme hybrid system for the sensitive determination of glucose

In this paper, we attempt to develop a sensitive detection method for glucose with the combination of the unique optical property of quantum dots and the specificity of enzymatic reactions. With glucose and hydroquinone as substrates, benzoquinone that intensively quenches the photoluminescence of quantum dots can be produced via the catalysis of bienzyme (glucose oxidase and horseradish peroxidase) system. A relatively low detection limit of 1.0x10(-8)mol/L can be achieved. Two linear ranges from 1.0x10(-6) to 1.5x10(-4)M and from 1.5x10(-4) to 1.0x10(-3)M were obtained. For the detection of 1.0x10(-4)M glucose, six replicative measurements showed the reproducibility (R.S.D.) of 4.43%. The quantum dots-enzymes system possesses advantages of simple procedure without modification of quantum dots or immobilization of enzymes, low cost, high sensitivity and short detection times within several minutes.