An Interspecific Backcross of Lycopersicon Esculentum X L. Hirsutum: Linkage Analysis and a Qtl Study of Sexual Compatibility Factors and Floral Traits

A BC(1) population of the self-compatible tomato Lycopersicon esculentum and its wild self-incompatible relative L. hirsutum f. typicum was used for restriction fragment length polymorphism linkage analysis and quantitative trait loci (QTL) mapping of reproductive behavior and floral traits. The self-incompatibility locus, S, on chromosome 1 harbored the only QTL for self-incompatibility indicating that the transition to self-compatibility in the lineage leading to the cultivated tomato was primarily the result of mutations at the S locus. Moreover, the major QTL controlling unilateral incongruity also mapped to the S locus, supporting the hypothesis that self-incompatibility and unilateral incongruity are not independent mechanisms. The mating behavior of near-isogenic lines carrying the L. hirsutum allele for the S locus on chromosome 1 in an otherwise L. esculentum background support these conclusions. The S locus region of chromosome 1 also harbors most major QTL for several floral traits important to pollination biology (e.g., number and size of flowers), suggesting a gene complex controlling both genetic and morphological mechanisms of reproduction control. Similar associations in other flowering plants suggest that such complex may have been conserved since early periods of plant evolution or else reflect a convergent evolutionary process.     

The genetic basis of pear-shaped tomato fruit

Molecular-marker analysis of a cross between yellow pear, a tomato variety bearing small, pear-shaped fruit, and the round-fruited, wild species, Lycopersicon pimpinellifolium LA1589, revealed that pear-shaped fruit is determined largely by a major QTL on chromosome 2 and, to a lesser extent, a minor QTL on chromosome 10. The locus on chromosome 2 was also detected in a cross between yellow pear and the round-fruited introgression line (IL2–5) which carried the distal portion of chromosome 2 from the Lycopersicon pennellii genome. Based on its map position, we propose that the locus detected on chromosome 2 is the same as a locus referred to as ovate in the early tomato literature (Linstrom 1926, 1927). The fruit-shape index (length/diameter) and neck constriction were highly correlated in both populations suggesting that ovate exerts control over both traits or that the genes for these traits are tightly linked on chromosome 2. Using two-way ANOVA test, the minor QTL on chromosome 10 showed no significant interaction with the ovate locus on chromosome 2 with respect to the fruit-shape index. For ovate round fruit was dominant to elongated fruit in the L. pimpinellifolium populations, but additive in the IL2–5 population. Thus far, no genes controlling fruit shape have been cloned. The molecular mapping of the ovate locus may ultimately lead to its isolation via map-based cloning. Received: 8 January 1999 / Accepted: 30 January 1999     

Tristyly in the endangered Mascarene Island endemic Hugonia serrata (Linaceae)

Tristyly is a rare floral polymorphism known to occur in only five flowering plant families. One unresolved and potential additional case of tristyly concerns the genus Hugonia in the Linaceae. Here we confirm the existence of tristyly in the genus by reporting floral measurements made on Hugonia serrata Lam., an extremely rare species endemic to the Mascarene Islands of La Réunion and Mauritius in the southern Indian Ocean. We conducted an extensive search of all natural habitats on La Réunion Island where the species had been previously reported. Twenty-eight individuals were found, of which nine were in flower. Of the nine flowering individuals five had long-styled flowers with the stigmas placed above the two levels of anthers, three had intermediate length styles with the stigmas placed between the two anther levels, and one had stigmas placed below the two anther levels, i.e., three floral morphs could be identified based on the sequence of stigma and anther positions. Reciprocity and precision indices calculated for sexual organ length in each morph confirm that this variation is well within the range of values observed by previous workers on other tristylous species in other families. Our empirical data confirm the existence of tristyly in the genus Hugonia, thereby raising the number of known families in which tristyly occurs to six. Pollen size, pollen number, and anther length increased slightly with stamen length, but the low number of plants precludes statistical tests of these trends. A bibliographic survey suggests that tristyly may occur in several other species of the genus.     

Quantitative trait loci for floral morphology in Arabidopsis thaliana

A central question in biology is how genes control the expression of quantitative variation. We used statistical methods to estimate genetic variation in eight Arabidopsis thaliana floral characters (fresh flower mass, petal length, petal width, sepal length, sepal width, long stamen length, short stamen length, and pistil length) in a cosmopolitan sample of 15 ecotypes. In addition, we used genome-wide quantitative trait locus (QTL) mapping to evaluate the genetic basis of variation in these same traits in the Landsberg erecta x Columbia recombinant inbred line population. There was significant genetic variation for all traits in both the sample of naturally occurring ecotypes and in the Ler x Col recombinant inbred line population. In addition, broad-sense genetic correlations among the traits were positive and high. A composite interval mapping (CIM) analysis detected 18 significant QTL affecting at least one floral character. Eleven QTL were associated with several floral traits, supporting either pleiotropy or tight linkage as major determinants of flower morphological integration. We propose several candidate genes that may underlie these QTL on the basis of positional information and functional arguments. Genome-wide QTL mapping is a promising tool for the discovery of candidate genes controlling morphological development, the detection of novel phenotypic effects for known genes, and in generating a more complete understanding of the genetic basis of floral development.     

The making of a bell pepper-shaped tomato fruit: identification of loci controlling fruit morphology in Yellow Stuffer tomato

The heirloom tomato cultivar Yellow Stuffer produces fruit that are similar in shape and structure to fruit produced by the bell pepper varieties of garden pepper. To determine the genetic basis of this extreme fruit type in tomato, quantitative trait loci (QTL) analysis was performed on an F(2) population derived from a cross between Yellow Stuffer and the related species, Lycopersicon pimpinellifolium, which produces a small, round fruit typical of most wild species. F(2) plants were analyzed for both fruit size and the degree to which their fruit resembled the bell pepper. Three QTL were determined to influence bell pepper shape and seven QTL influenced fruit mass. The map positions of all three bell shape and six out of seven fruit size QTL appear to be allelic to components of fruit morphology analyzed in this population and to major fruit morphology QTL reported previously, adding support to the hypothesis that the majority of fruit size and shape variation in cultivated tomato is attributable to allelic variation at a limited number of loci. However, novel loci controlling components of fruit morphology, such as elongated fruit shape, bumpiness, number of seed per fruit and flowers per inflorescence were identified in this study as well. The three bell shape loci involved are: bell2.1, bell2.2 and bell8.1, and appear to correspond to locule number2.1 ( lcn2.1) and fruit weight 2.2 ( fw2.2) and fruit shape 8.1 ( fs8.1), respectively. The Yellow Stuffer alleles at lcn2.1 and fw2.2 increase locule number and fruit size, respectively, hence contributing to the overall bell pepper shape. The Yellow Stuffer allele at fs8.1 causes convex locule walls, giving the extended, bumpy shape characteristic of bell peppers. In addition, most fruit size QTL correspond to loci controlling number of flowers per inflorescence and/or stem-end blockiness. Comparisons among previously identified fruit morphology loci in tomato, eggplant and pepper suggest that loci affecting several aspects of fruit morphology may be due to pleiotrophic effects of the same, orthologous loci in these species. Moreover, it appears that the evolution of bell pepper-shaped tomato fruit may have proceeded through mutations of some of the same genes that led to bell pepper-type fruit in garden pepper.     

QTLs for tomato powdery mildew resistance (Oidium lycopersici) in Lycopersicon parviflorum G1.1601 co-localize with two qualitative powdery mildew resistance genes

Tomato (Lycopersicon esculentum) is susceptible to the powdery mildew Oidium lycopersici, but several wild relatives such as Lycopersicon parviflorum G1.1601 are completely resistant. An F2 population from a cross of Lycopersicon esculentum cv. Moneymaker x Lycopersicon parviflorum G1.1601 was used to map the O. lycopersici resistance by using amplified fragment length polymorphism markers. The resistance was controlled by three quantitative trait loci (QTLs). Ol-qtl1 is on chromosome 6 in the same region as the Ol-1 locus, which is involved in a hypersensitive resistance response to O. lycopersici. Ol-qtl2 and Ol-qtl3 are located on chromosome 12, separated by 25 cM, in the vicinity of the Lv locus conferring resistance to another powdery mildew species, Leveillula taurica. The three QTLs, jointly explaining 68% of the phenotypic variation, were confirmed by testing F3 progenies. A set of polymerase chain reaction-based cleaved amplified polymorphic sequence and sequence characterized amplified region markers was generated for efficient monitoring of the target QTL genomic regions in marker assisted selection. The possible relationship between genes underlying major and partial resistance for tomato powdery mildew is discussed.     

Marker-assisted selection and evaluation of the QTL for stigma exsertion under japonica rice genetic background

Stigma exsertion is one of the important traits which contribute to the efficient improvement of commercial seed production in hybrid rice. In order to understand the genetic factors involved in the stigma exsertion of an indica variety—IR24—a QTL analysis was conducted using the F₂ population between a japonica variety—Koshihikari—and a breeding line showing exserted stigma selected from the backcross population between IR24 as a donor and japonica varieties. As a result, a highly significant QTL (qES3), which had been predicted in the recombinant inbred population of IR24, was confirmed at the centromeric region on chromosome 3. qES3 increases about 20% of the frequency of the exserted stigmas at the IR24 allele and explains about 32% of the total phenotypic variance. A QTL near-isogenic line for qES3 increased the frequency of the exserted stigma by 36% compared to that of Koshihikari in a field evaluation, which suggests that qES3 is a promising QTL for the development of a maternal line for hybrid rice. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users. Maiko Miyata and Toshio Yamamoto contributed equally to this study.     

Genetic analysis of traits distinguishing outcrossing and self-pollinating forms of currant tomato,Lycopersicon pimpinellifolium (Jusl.) Mill

The evolution of inbreeding is common throughout the angiosperms, although little is known about the developmental and genetic processes involved. Lycopersicon pimpinellifolium (currant tomato) is a self-compatible species with variation in outcrossing rate correlated with floral morphology. Mature flowers from inbreeding and outcrossing populations differ greatly in characters affecting mating behavior (petal, anther, and style lengths); other flower parts (sepals, ovaries) show minimal differences. Analysis of genetic behavior, including quantitative trait locus (QTL) mapping, was performed on representative selfing and outcrossing plants derived from two contrasting natural populations. Six morphological traits were analyzed: flowers per inflorescence; petal, anther, and style lengths; and lengths of the fertile and sterile portions of anthers. All traits were smaller in the selfing parent and had continuous patterns of segregation in the F(2). Phenotypic correlations among traits were all positive, but varied in strength. Quantitative trait locus mapping was done using 48 RFLP markers. Five QTL total were found involving four of the six traits: total anther length, anther sterile length, style length, and flowers per inflorescence. Each of these four traits had a QTL of major (>25%) effect on phenotypic variance.     

Fine mapping of quantitative trait loci for improved fruit characteristics from Lycopersicon chmielewskii chromosome 1.

The near-isogenic line (NIL) TA1150 contains a 56-cM introgression from Lycopersicon chmielewskii chromosome 1 and has several interesting phenotypic characteristics including fruit with orange color, high levels of soluble solids, thick pericarp, small stem scars, and good firmness. A set of overlapping recombinant lines (subNILs) was developed and field tested to fine map the quantitative trait loci (QTL) controlling these traits. The results indicated that the solids, pericarp thickness, and firmness QTL are distinct from the color locus. Several of the QTL mapped in this study, including the soluble-solids QTL, probably correspond to QTL mapped in other wild species of tomato. However, analysis of a set of TA523 subNILs containing complementary introgressions from Lycopesicon hirsutum chromosome 1 suggests that this wild species may contain a different locus for improved soluble solids. Thus, it might be possible to combine the L. chmielewskii and L. hirsutum alleles for these loci in a single line with the potential for extremely highly soluble solids. The TA1150 subNIL TA1688 contains the smallest introgression of the solids locus (approximately 19 cM), as well as the pericarp thickness and firmness QTL, with a yield that was equivalent to two of the three control lines. Isolation of recombinant subNILs from TA1688 should break the linkage between orange color and high solids and provide a small introgressed segment for marker-assisted breeding and genetic improvement of processing tomato.     

Quantitative trait locus analysis in crosses between outbred lines with dominance and inbreeding

In an effort to determine the genetic basis of exceptionally large tomato fruits, QTL analysis was performed on a population derived from a cross between the wild species Lycopersicon pimpinellifolium (average fruit weight, 1 g) and the L. esculentum cultivar var. Giant Heirloom, which bears fruit in excess of 1000 g. QTL analysis revealed that the majority (67%) of phenotypic variation in fruit size could be attributed to six major loci localized on chromosomes 1-3 and 11. None of the QTL map to novel regions of the genome-all have been reported in previous studies involving moderately sized tomatoes. This result suggests that no major QTL beyond those already reported were involved in the evolution of extremely large fruit. However, this is the first time that all six QTL have emerged in a single population, suggesting that exceptionally large-fruited varieties, such as Giant Heirloom, are the result of a novel combination of preexisting QTL alleles. One of the detected QTL, fw2.2, has been cloned and exerts its effect on fruit size through global control of cell division early in carpel/fruit development. However, the most significant QTL detected in this study (fw11.3, lcn11.1) maps to the bottom of chromosome 11 and seems to exert its effect on fruit size through control of carpel/locule number. A second major locus, also affecting carpel number (and hence fruit size), was mapped to chromosome 2 (fw2.1, lcn2.1). We propose that these two carpel number QTL correspond to the loci described by early classical geneticists as fasciated (f) and locule number (lc), respectively.     

QTLs mapping for fruit size and shape in chromosomes 2 and 4 in pepper and a comparison of the pepper QTL map with that of tomato

Quantitative trait locus (QTL) mapping for fruit weight and shape in pepper (Capsicum spp.) was performed using C. chinense and C. frutescens introgression lines of chromosomes 2 and 4. In chromosome 2, a single major fruit-weight QTL, fw2.1, was detected in both populations that explained 62% of the trait variation. This QTL, as well as a fruit-shape QTL, fs2.1, which had a more minor effect, were localized to the tomato fruit-shape gene ovate. The cloned tomato fruit-weight QTL, fw2.2, did not play a major role in controlling fruit size variations in pepper. In chromosome 4, two fruit-weight QTLs, fw4.1 and fw4.2, were detected in the same genomic regions in both mapping populations. In addition, a single fruit-shape QTL was detected in each of the mapping populations that co-localized with one of the fruit-weight QTLs, suggesting pleiotropy or close linkage of the genes controlling size and shape. fw2.1 and fw4.2 represent major fruit-weight QTLs that are conserved in the three Capsicum species analyzed to date for fruit-size variations. Co-localization of the pepper QTLs with QTLs identified for similar traits in tomato suggests that the pepper and tomato QTLs are orthologous. Compared to fruit-shape QTLs, fruit-weight QTLs were more often conserved between pepper and tomato. This implies that different modes of selection were employed for these traits during domestication of the two Solanaceae species.S. Zygier and A. Ben Chaim contributed equally to this work.     

A strong quantitative trait locus for wing length on chromosome 2 in a wild population of great reed warblers

Wing length is a key character for essential behaviours related to bird flight such as migration and foraging. In the present study, we initiate the search for the genes underlying wing length in birds by studying a long-distance migrant, the great reed warbler (Acrocephalus arundinaceus). In this species wing length is an evolutionary interesting trait with pronounced latitudinal gradient and sex-specific selection regimes in local populations. We performed a quantitative trait locus (QTL) scan for wing length in great reed warblers using phenotypic, genotypic, pedigree and linkage map data from our long-term study population in Sweden. We applied the linkage analysis mapping method implemented in GridQTL (a new web-based software) and detected a genome-wide significant QTL for wing length on chromosome 2, to our knowledge, the first detected QTL in wild birds. The QTL extended over 25 cM and accounted for a substantial part (37%) of the phenotypic variance of the trait. A genome scan for tarsus length (a body-size-related trait) did not show any signal, implying that the wing-length QTL on chromosome 2 was not associated with body size. Our results provide a first important step into understanding the genetic architecture of avian wing length, and give opportunities to study the evolutionary dynamics of wing length at the locus level.     

Temporal and multiple quantitative trait loci analyses of resistance to bacterial wilt in tomato permit the resolution of linked loci

Ralstonia solanacearum is a soil-borne bacterium that causes the serious disease known as bacterial wilt in many plant species. In tomato, several QTL controlling resistance have been found, but in different studies, markers spanning a large region of chromosome 6 showed strong association with the resistance. By using two different approaches to analyze the data from a field test F3 population, we show that at least two separate loci approximately 30 cM apart on this chromosome are most likely involved in the resistance. First, a temporal analysis of the progression of symptoms reveals a distal locus early in the development of the disease. As the disease progresses, the maximum LOD peak observed shifts toward the proximal end of the chromosome, obscuring the distal locus. Second, although classical interval mapping could only detect the presence of one locus, a statistical "two-QTL model" test, specifically adapted for the resolution of linked QTL, strongly supported the hypothesis for the presence of two loci. These results are discussed in the context of current molecular knowledge about disease resistance genes on chromosome 6 and observations made by tomato breeders during the production of bacterial wilt-resistant varieties.     

FLORAL BIOLOGY OF MAGNOLIA

The floral biology of eight species of Magnolia native to the United States is described. The flowers are protogynous. They are pollinated by several species of beetles that enter buds as well as closed and open flowers to feed on nectar, stigmas, pollen, and secretions of the petals. Individual flowers persist from two to four days and undergo a series of petal, stigma, and stamen movements that assure pollination by beetles. It is suggested that the flowers of Magnolia are highly specialized for exclusive pollination by beetles. These specialization mechanisms produce large quantities of food for the beetles and deny other types of insects (bees, moths, etc.) access to the flowers at critical stages in the pollination process, i.e., when stigmas are mature and pollen is shed.     

A comparative study of the genetic bases of natural variation in tomato leaf,sepal, and petal morphology

In an effort to better understand the dramatic differences in vegetative and floral morphology that differentiate species within the genus Lycopersicon, quantitative trait loci (QTL) for leaflet and perianth size and shape characters were mapped in an interspecific F₂ population of tomato (Lycopersicon esculentum × L. pennellii). Thirty-six highly significant (P0.001) QTL were associated with 18 separate traits. QTL for correlated traits were generally not colocalized in the genome unless there was a clear codependence between the traits (e.g., organ length and area). Little or no overlap in QTL positioning between different organs was observed, suggesting that the genes determining the size and shape of leaflets, sepals, and petals are organ specific. Thus, while leaves are considered the developmental and evolutionary precursors to floral organs, genes acting late in development to determine certain aspects of morphology (namely shape and size) must have specialized to exert control over individual organs. Five of the leaflet-trait QTL map to analogous regions in the genome of eggplant, and therefore it appears there has been some conservation in the genes controlling leaf morphology within the Solanaceae.     

水稻柱头外露率的QTL分析

利用高柱头外露率的籼稻窄叶青8号(ZYQ8)和极低外露率的粳稻京系17(JX17)以及由它们构建的加倍单倍体(DH)群体,在海南对各DH株系的柱头外露率进行调查,并使用该群体的分子连锁图谱进行数量性状座位(QTL)分析。共检测到2个控制水稻柱头外露率的QTL(qPES-2,qPES-3),分别位于第2、第3染色体;并发现控制柱头单边外露率的QTL与柱头外露率完全一致,而控制柱头双边外露率的QTL在第2染色体上检测到;其增效基因均来源于ZYQ8。同时定位的控制穗粒数的QTL位于第6染色体和第8染色体上,与柱头外露率之间没有连锁关系。     

Teosinte Branched1 and the Origin of Maize: Evidence for Epistasis and the Evolution of Dominance

Two quantitative trait loci (QTL) controlling differences in plant and inflorescence architecture between maize and its progenitor (teosinte) were analyzed. Complementation tests indicate that one of these, which is on chromosome arm 1L, is the locus for the maize mutant teosinte branched1 (tb1). This QTL has effects on inflorescence sex and the number and length of internodes in the lateral branches and inflorescences. This QTL has strong phenotypic effects in teosinte background but reduced effects in maize background. The second QTL, which is on chromosome arm 3L, affects the same traits as the QTL on 1L. We identify two candidate loci for this QTL. The effects of this QTL on several traits are reduced in both maize and teosinte background as compared to a maize-teosinte F(2) population. Genetic background appears to affect gene action for both QTL. Analysis of a population in which both QTL were segregating revealed that they interact epistatically. Together, these two QTL substantially transform both plant and inflorescence architecture. We propose that tb1 is involved in the teosinte plant's response to local environment to produce either long or short branches and that maize evolution involved a change at this locus to produce short branches under all environments.     

There is more to tomato fruit colour than candidate carotenoid genes

Determining gene sequences responsible for complex phenotypes has remained a major objective in modern biology. The candidate gene approach is attempting to link, through mapping analysis, sequences that have a known functional role in the measured phenotype with quantitative trait loci (QTL) that are responsible for the studied variation. To explore the potential of the candidate approach for complex traits we conducted a mapping analysis of QTL for the intensity of the red colour of the tomato fruit (mainly lycopene) and for probes associated with the well-characterized carotenoid biosynthesis pathway. Seventy-five tomato introgression lines (ILs), each containing a single homozygous RFLP-defined chromosome segment from the green-fruited species Lycopersicon pennellii delimited 107 marker-defined mapping bins. Three of the bins resolved known qualitative colour mutations for yellow (r) and orange (B and Del) fruits resulting from variation in specific carotenoid biosynthesis genes. Based on trials in different environments, 16 QTL that modified the intensity of the red colour of ripe fruit were assigned to bins. Candidate sequences associated with the carotenoid biosynthesis pathway were mapped to 23 loci. Only five of the QTL co-segregated with the same bins that contained candidate genes - a number that is expected by chance alone. Furthermore, similar map location of a QTL and a candidate is far from a direct causative relationship between a gene and a phenotype. This study highlights the wealth and complexity of the variation present in the genus Lycopersicon that could be employed for basic research and genetic improvement of fruit colour in tomato.     

Active self-pollination in blackberries (Rubus subgen. Rubus, Rosaceae)

Most blackberry species are apomictic but pseudogamous, i.e. embryo development is dependent on prior pollination. Two different types of stamen arrangement were noted in senescing flowers of 18 Swedish species and 2 common cultivars. The stamens of 'cross-pollinating' species seldom touch the stigmas while those of 'self-pollinating' species instead arch over the pistils and dry up in this position. All species set seed well after artificial self-pollination and are thus self-compatible. Isolation experiments were carried out during 3 years. When inflorescences were bagged, seed set was drastically lowered in 'cross-pollinators' but remained almost unaltered in 'self-pollinators'. The different responses to isolation are probably due to the inherent stamen behaviour.