Studies on the interaction of C1q, a subcomponent of the first component of complement, with porins from Salmonella minnesota incorporated into artificial membranes.

Purified outer membrane proteins (OMP) of Salmonella minnesota, Re-form, were incorporated into liposomes. These induced in macrophages a chemiluminescence signal identical to that of the intact Re-form. This signal was abolished by preincubation of porin-containing liposomes with purified C1q. Incorporation of isolated OMP into black lipid membranes (BLM) resulted in channel-formation which could not be inhibited by isolated C1q. Additionally, incubation of OMP-containing liposomes with BLM resulted in pore-formation within the BLM. This was amplified when lipid A was present within the liposomes. Preincubation of OMP-containing liposomes with purified C1q abolished pore-formation within the BLM.     

Fluorimetric detection of phospholipid vesicles bound to planar phospholipid membranes.

The first step in the fusion of two phospholipid membranes culminates in the aggregation of the two lipid bilayers. We have used a custom-built fluorimeter to detect multilamellar vesicles (liposomes) containing the fluorescent dye, 6-carboxyfluorescein (6-CF), bound to a planar lipid bilayer (BLM). Liposomes were added to one side of the BLM, and unbound vesicles were perfused out. This left a residual fluorescence from the BLM, but only when the membranes contained anionic lipids, and then only when millimolar levels of calcium were present. This residual fluorescence was consistently detected only when calcium was included in the buffer during the perfusion. This residual fluorescence originated from liposomes bound to the BLM. Breaking the BLM or lysing the adsorbed vesicles with distilled water abolished it. free 6-CF and/or calcium in the absence of liposomes resulted in no residual fluorescence. No residual fluorescence was detected when both the liposomes and the BLM were composed entirely of zwitterionic lipids. This was found to result from the insensitivity of the fluorimeter to a small number of liposomes adsorbed to the BLM. For this system, we conclude that calcium is necessary for both the initiation and maintenance of the state in which the vesicle membrane is bound to the planar bilayer when the membranes contain negatively charged lipids. This attachment is stronger than the interaction between zwitterionic membranes.     

Efficient introduction of contents of liposomes into cells using HVJ (Sendai virus)

The conditions for efficient introduction of the contents of liposomes into cells were examined using fragment A of diphtheria toxin (DA) as a marker; one molecule of DA can kill a cell when introduced into the cytoplasm. Liposomes containing DA (DA liposomes) were toxic to cells treated with HVJ (Sendai virus) at 4 degrees C just before exposure to DA liposomes at 37 degrees C, but were not toxic to untreated cells. This toxicity was temperature-dependent. DA outside of liposomes was not toxic to HVJ-treated cells. Results also showed that liposomes could fuse with HVJ at 37 degrees but not at 4 degrees C and that liposomes preincubated with HVJ at 37 degrees C could associate with cells. DA liposomes preincubated with HVJ at 37 degrees C were highly toxic to cells. This toxicity was dependent on the duration of preincubation with HVJ and the dose of HVJ. When plasmid DNA coded herpes simplex virus thymidine kinase was trapped in liposomes and fused with Ltk- cells with HVJ, the thymidine kinase activity was expressed in about 10% of the cells. These data show that naked liposomes fuse efficiently with cells with HVJ and that the contents of the liposomes can be introduced into the cytoplasm 100-10 000 times more efficiently by treatment of the cells or liposomes with HVJ.     

hERG ion channel pharmacology: cell membrane liposomes in porous-supported lipid bilayers compared with whole-cell patch-clamping

The purpose of this study was to obtain functional hERG ion channel protein for use in a non-cell-based ion channel assay. hERG was expressed in Sf9 insect cells. Attempts to solubilise the hERG protein from Sf9 insect cell membranes using non-ionic detergents (NP40 and DDM) were not successful. We therefore generated liposomes from the unpurified membrane fraction and incorporated these into porous Teflon-supported bilayer lipid membranes. Macroscopic potassium currents (1 nA) were recorded that approximated those in whole-cell patch-clamping, but the channels were bidirectional in the bilayer lipid membrane (BLM). Currents were partially inhibited by the hERG blockers E4031, verapamil, and clofilium, indicating that the protein of interest is present at high levels in the BLM relative to endogenous channels. Cell liposomes produced from Sf9 insect cell membranes expressing voltage-gated sodium channels also gave current responses that were activated by veratridine and inhibited by saxitoxin. These results demonstrate that purification of the ion channel of interest is not always necessary for liposomes used in macro-current BLM systems.     

Mechanics of Biomimetic Liposomes Encapsulating an Actin Shell

Cell-shape changes are insured by a thin, dynamic, cortical layer of cytoskeleton underneath the plasma membrane. How this thin cortical structure impacts the mechanical properties of the whole cell is not fully understood. Here, we study the mechanics of liposomes or giant unilamellar vesicles, when a biomimetic actin cortex is grown at the inner layer of the lipid membrane via actin-nucleation-promoting factors. Using a hydrodynamic tube-pulling technique, we show that tube dynamics is clearly affected by the presence of an actin shell anchored to the lipid bilayer. The same force pulls much shorter tubes in the presence of the actin shell compared to bare membranes. However, in both cases, we observe that the dynamics of tube extrusion has two distinct features characteristic of viscoelastic materials: rapid elastic elongation, followed by a slower elongation phase at a constant rate. We interpret the initial elastic regime by an increase of membrane tension due to the loss of lipids into the tube. Tube length is considerably shorter for cortex liposomes at comparable pulling forces, resulting in a higher spring constant. The presence of the actin shell seems to restrict lipid mobility, as is observed in the corral effect in cells. The viscous regime for bare liposomes corresponds to a leakout of the internal liquid at constant membrane tension. The presence of the actin shell leads to a larger friction coefficient. As the tube is pulled from a patchy surface, membrane tension increases locally, leading to a Marangoni flow of lipids. As a conclusion, the presence of an actin shell is revealed by its action that alters membrane mechanics.     

The Role of Membrane Lateral Tension in Calcium-Induced Membrane Fusion

Calcium-induced fusion of liposomes was studied with a view to understand the role of membrane tension in this process. Lipid mixing due to fusion was monitored by following fluorescence of rhodamine-phosphatidyl-ethanolamine incorporated into liposomal membrane at a self-quenching concentration. The extent of lipid mixing was found to depend on the rate of calcium addition: at slow rates it was significantly lower than when calcium was injected instantly. The vesicle inner volume was then made accessible to external calcium by adding calcium ionophore A23187. No effect on fusion was observed at high rates of calcium addition while at slow rates lipid mixing was eliminated. Fusion of labeled vesicles with a planar phospholipid membrane (BLM) was studied using fluorescence microscopy. Above a threshold concentration specific for each ion, Ca²⁺, Mg²⁺, Cd²⁺ and La³⁺ induce fusion of both charged and neutral membranes. The threshold calcium concentration required for fusion was found to be dependent on the vesicle charge, but not on the BLM charge. Pretreatment of vesicles with ionophore and calcium inhibited vesicle fusion with BLM. This effect was reversible: chelation of calcium prior to the application of vesicle to BLM completely restored their ability to fuse. These results support the hypothesis that tension in the outer monolayer of lipid vesicle is a primary reason for membrane destabilization promoting membrane fusion. How this may be a common mechanism for both purely lipidic and protein-mediated membrane fusion is discussed. Received: 27 September 1999/Revised: 22 March 2000     

Dopamine-induced exocytosis of Na,K-ATPase is dependent on activation of protein kinase C-epsilon and -delta

The purpose of this study was to define mechanisms by which dopamine (DA) regulates the Na,K-ATPase in alveolar epithelial type 2 (AT2) cells. The Na,K-ATPase activity increased by twofold in cells incubated with either 1 μM DA or a dopaminergic D₁ agonist, fenoldopam, but not with the dopaminergic D₂ agonist quinpirole. The increase in activity paralleled an increase in Na,K-ATPase α1 and β1 protein abundance in the basolateral membrane (BLM) of AT2 cells. This increase in protein abundance was mediated by the exocytosis of Na,K-pumps from late endosomal compartments into the BLM. Down-regulation of diacylglycerol-sensitive types of protein kinase C (PKC) by pretreatment with phorbol 12-myristate 13-acetate or inhibition with bisindolylmaleimide prevented the DA-mediated increase in Na,K-ATPase activity and exocytosis of Na,K-pumps to the BLM. Preincubation of AT2 cells with either 2-[1-(3-dimethylaminopropyl)-5-methoxyindol-3-yl]-3-(1H-indol-3-yl)maleimide (Gö6983), a selective inhibitor of PKC-δ, or isozyme-specific inhibitor peptides for PKC-δ or PKC-ε inhibited the DA-mediated increase in Na,K-ATPase. PKC-δ and PKC-ε, but not PKC-α or -β, translocated from the cytosol to the membrane fraction after exposure to DA. PKC-δ– and PKC-ε–specific peptide agonists increased Na,K-ATPase protein abundance in the BLM. Accordingly, dopamine increased Na,K-ATPase activity in alveolar epithelial cells through the exocytosis of Na,K-pumps from late endosomes into the basolateral membrane in a mechanism-dependent activation of the novel protein kinase C isozymes PKC-δ and PKC-ε.     

Interaction of human immunodeficiency virus (HIV-1) fusion peptides with artificial lipid membranes

The interaction of 11 overlapping synthetic peptides corresponding to N-terminal segment of HIV transmembrane glycoprotein gp41 (fusion domain) with artificial lipid membranes has been studied. For this purpose the increase of a bilayer lipid membrane (BLM) conductivity and the changes in ESR spectra of spin-labelled liposomes were registrated. Peptide fragment 523-532 gp160 (BRU strain) had the critical length with regard to channel-forming activity on BLM. The degree of such membranotropic action increased simultaneously with the growth of peptide length and the temperature in the cell. Peptides 518-532 and 517-532 lysed TEMPOcholine-containing liposomes at 37 degrees C. The significance of observed effects for explanation of the mechanism of HIV-induced membrane fusion is discussed.     

Interaction between filamentous actin and lipid bilayer causes the increase of syringomycin E channel-forming activity

The effect of filamentous (F) actin on the channel-forming activity of syringomycin E (SRE) in negatively charged and uncharged bilayer lipid membranes (BLM) was studied. F-actin did not affect the membrane conductance in the absence of SRE. No changes in SRE-induced membrane conductance were observed when the above agents were added to the same side of BLM. However, the opposite side addition of F-actin and SRE provokes a multiple increase in membrane conductance. The similar voltage dependence of membrane conductance, equal values of single channel conductance and the effective gating charge of the channels upon F-actin action suggests that the actin-dependent increase in BLM conductance may result from an increase in the number of opened SRE-channels. BLM conductance kinetics depends on the sequence of SRE and F-actin addition, suggesting that actin-dependent rise of conductance may be induced by BLM structural changes that follow F-actin adsorption. F-actin exerted similar effect on membrane conductance of both negatively charged and uncharged bilayers, as well as on conductance of BLM with high ionic strength bathing solution, suggesting the major role for hydrophobic interactions in F-actin adsorption on lipid bilayer.     

Ca++-induced fusion of fragmented sarcoplasmic reticulum with artificial planar bilayers

Summary Addition of fragmented sarcoplasmic reticulum (SR) vesicles to the aqueous phase of a black lipid membrane (BLM) causes a large increase in BLM conductance within 10 min. The conductance increase is absolutely dependent on three conditions: The presence of at least 0.5mm Ca⁺⁺, an acidic phospholipid such as phosphatidylserine or diphosphatidylglycerol in the BLM phospholipid mixture, and an osmotic gradient across the SR vesicle membrane, with the internal osmolarity greater than the external. These requirements are identical to conditions under which the fusion of phospholipid vesicles occurs.When the early part of the time course of conductance rise is examined at high sensitivity, the conductance is seen to increase in discrete steps. The probability of a step increases with the concentration of Ca⁺⁺ in the medium, with the fraction of acidic phospholipid in the BLM, and with the size of the osmotic gradient across the SR vesicle membrane. On the other hand, the average conductance change per step is independent of the above parameters, but varies with the type and concentration of ions present in the aqueous phase. For a given ion, the mean specific conductance per step is independent of the ion's concentration between 10 and 100mm.The probability distribution of the step-conductances agrees well with the distribution of SR vesicle surface areas, both before and after sonication of the vesicles.The evidence indicates that SR vesicles fuse with the BLM, thereby inserting SR membrane conductance pathways into it. Each discrete conductance jump appears to be the result of the fusion of a single SR vesicle with the BLM. This technique may serve as a general method for inserting membrane vesicles into an electrically accessible system.     

Electrostatic effects upon adsorption and desorption of polylysines on the surface of lipid membranes of different composition

Electrokinetic measurements are carried out in suspensions of liposomes made from mixtures of charged (cardiolipin, CL) and neutral (phosphatidylcholine, PC) lipids in the presence of lysine and lysine-based polypeptides. Neither monolysine nor polylysines adsorbed on neutral (PC) membranes. In the case of negatively charged membranes (CL/PC) all polypeptides showed a sharp dependence of liposome electrophoretic mobility on the amount of polymer added to the cell. In suspension of cardiolipin liposomes the position of zero charge point coincided for all high-molecular polylysines; thus, pentalysine neutralizes the membrane surface, whereas polycations with a higher polymerization degree change a sign of the surface charge. Electrophoretic mobility of liposomes in plateau range depended on the molecular weight of polylysines and composition of liposomes; for large macromolecules the absolute value came close to its value for the initial liposomes. Adsorption of polycations on planar bilayer lipid membranes (BLM) resulted in alteration of the boundary potential measured by the method of intramembranous field compensation (IFC). The electrokinetic measurements and IFC method gave close results in the case of lysine monomers; their surface concentration could be fitted by an isotherm of the molecule distribution between the membrane surface and solution. Considerable differences of the surface and boundary potentials found in the case of pentalysine, correspond to changes in the dipole component of boundary potential induced by the adsorbed molecules. Using the IFC method, the kinetics of the adsorption process before saturation was studied. The adsorption of polylysines was markedly slower (more than hour) than that of pentalysine (tens of min) or monolysine (minutes). Washout experiments showed that adsorption of penta-and monolysine on planar BLM was reversible, while that of high-molecular polylysines was practically irreversible.     

Morphogenesis of liposomes encapsulating actin depends on the type of actin-crosslinking

To study the morphogenesis of cells caused by the organization of their internal cytoskeletal network, we characterized the transformation of liposomes encapsulating actin and its crosslinking proteins, fascin, alpha-actinin, or filamin, using real-time high-intensity dark-field microscopy. With increasing temperature, the encapsulated G-actin polymerized into actin filaments and formed bundles or gels, depending on the type of actin-crosslinking protein that was co-encapsulated, causing various morphological changes of liposomes. The differences in morphology among transformed liposomes indicate that actin-crosslinking proteins determine liposome shape by organizing their specific actin networks. Morphological analysis reveals that the crosslinking manner, i.e. distance and angular flexibility between adjacent crosslinked actin filaments, is essential for the morphogenesis rather than their binding affinity and stoichiometry to actin filaments.     

Polymerization of actin by positively charged liposomes

By cosedimentation, spectrofluorimetry, and electron microscopy, we have established that actin is induced to polymerize at low salt concentrations by positively charged liposomes. This polymerization occurs only at the surface of the liposomes, and thus monomers not in direct contact with the liposome remain monomeric. The integrity of the liposome membrane is necessary to maintain actin in its polymerized state since disruption of the liposome depolymerizes actin. Actin polymerized at the surface of the liposome is organized into two filamentous structures: sheets of parallel filaments in register and a netlike organization. Spectrofluorimetric analysis with the probe N-pyrenyl-iodoacetamide shows that actin is in the F conformation, at least in the environment of the probe. However, actin assembly induced by the liposome is not accompanied by full ATP hydrolysis as observed in vitro upon addition of salts.     

Actin polymerization serves as a membrane domain switch in model lipid bilayers

The ability of cells to mount localized responses to external or internal stimuli is critically dependent on organization of lipids and proteins in the plasma membrane. Involvement of the actin cytoskeleton in membrane organization has been documented, but an active role for actin networks that directly links internal organization of the cytoskeleton with membrane organization has not yet been identified. Here we show that branched actin networks formed on model lipid membranes enriched with the lipid second messenger PIP(2) trigger both temporal and spatial rearrangement of membrane components. Using giant unilamellar vesicles able to separate into two coexisting liquid phases, we demonstrate that polymerization of dendritic actin networks on the membrane induces phase separation of initially homogenous vesicles. This switch-like behavior depends only on the PIP(2)-N-WASP link between the membrane and actin network, and we find that the presence of a preexisting actin network spatially biases the location of phase separation. These results show that dynamic, membrane-bound actin networks alone can control when and where membrane domains form and may actively contribute to membrane organization during cell signaling.     

Electrophoretic mobility of bimolecular lipid membranes

The floating membrane vesicle is fixed by the counter solution flow in different points along the radius of a cylinder electrophoretic chamber, which permits to measure the vesicle electrophoretic mobility (EM). Close state condition of the chamber is provided for by the capillary system successively connected with the chamber. Relationship between EM of bimolecular lipid membranes (BLM) and pH and ionic concentration of aqueous solution qualitatively coincides with similar relationship for liposomes. The EM value of BLM essentially decreases in solution containing polyene antibiotics nystatine and levorin when derivative of cholesterol having 3betaOH-groups is present in the membrane.     

Bilayer lipid membranes supported on Teflon filters: a functional environment for ion channels

Many ion channel proteins have binding sites for toxins and pharmaceutical drugs and therefore have much promise as the sensing entity in high throughput technologies and biosensor devices. Measurement of ionic conductance changes through ion channels requires a robust biological membrane with sufficient longevity for practical applications. The conventional planar BLM is 100-300 μm in diameter and typically contains fewer than a dozen channels whereas pharmaceutical screening methods in cells use current recordings for many ion channels. We present a new, simple method for the fabrication of a disposable porous-supported bilayer lipid membrane (BLM) ion channel biosensor using hydrated Teflon (polytetrafluoroethylene, PTFE) filter material (pore size 5 μm, filter diameter=1 mm). The lipid layer was monitored for its thickness and mechanical stability by electrical impedance spectroscopy. The results showed membrane capacitances of 1.8±0.2 nF and membrane resistances of 25.9±4.1 GΩ, indicating the formation of lipid bilayers. The current level increased upon addition of the pore-forming peptide gramicidin. Following addition of liposomes containing voltage-gated sodium channels, small macroscopic sodium currents (1-80 pA) could be recorded. By preloading the porous Teflon with sodium channel proteoliposomes, prior to BLM formation, currents of 1-10 nA could be recorded in the presence of the activator veratridine that increased with time, and were inhibited by tetrodotoxin. A lack of rectification suggests that the channels incorporated in both orientations. This work demonstrates that PTFE filters can support BLMs that provide an environment in which ion channels can maintain their functional activity relevant for applications in drug discovery, toxin detection, and odour sensing.     

Research on the mechanism of interaction between actin and membrane lipids

Using an in vitro system involving pure actin and liposomes, we have established that actin may interact with membrane lipids without any intermediate proteins, and that the mechanism of interaction depends upon the concentration of divalent cation. In the absence of divalent cation, actin increases membrane permeability. Low concentrations (1 mM) of divalent cation potentialize this interaction. In the presence of high divalent cation concentration, actin deposits on the surface of liposomes in a crystalline organization and reduces the membrane microviscosity as shown by the polarization of fluorescence of the DPH probe. We propose that actin interacts with lipids by hydrophobic association which is facilitated by initial electrostatic binding.     

Action of calcium channel and beta-adrenergic blocking agents in bilayer lipid membranes

The action of beta-adrenergic blockers (propranolol, exprenolol, metoprolol, sotalol, atenolol, timolol) and calcium-channel blockers (verapamil, diltiazem) on the electrical properties and fluidity of bilayer lipid membranes (BLM and liposomes) has been investigated. When antibiotic ionophore substances were used as a probe, the electrical measurements showed that many of the drugs inhibited the cation transport across the membrane facilitated by the mobile carrier valinomycin, while having no significant effect on the cation transport through channels formed by gramicidin. The ability of the drugs to decrease the carrier-dependent membrane conductance was correlated to their partition into the lipid bilayer and the magnitude of transmembrane potential induced by them. In the TEMPO ESR spectral measurements, a number of beta-adrenergic and calcium blockers showed the fluidizing effect on liposomes composed of different lipids. The drug concentration required for a detectable change in TEMPO spectra parameter (f) was rather high (0.01 M verapamil), and the variation of pH from 6.5 to 3.0 did not affect the fluidizing effect of the drugs.     

Interaction of all-<Emphasis Type="Italic">trans</Emphasis>-Retinal with bilayer lipid membranes

The interaction of all-trans-retinal (hereinafter referred to as retinal) with planar bilayer lipid membranes has been studied. Addition of retinal into aqueous solutions on both sides of the membrane formed from diphytanoilphosphatidylcholine (DPhPC) or its mixture with diphytanoilphosphatidylethanolamine (DPhPC/DPhPE in w/w proportion of 3: 5) led to a change of conductance induced by ionophores nonactin (increase of conductance) or pentachlorophenol (decrease). Increase of nonactin-induced conductance was dependent on the membrane lipid composition and was two times higher in the case of DPhPC/DPhPE mixture. The change of conductance caused by ionophores of different signs (plus or minus) had different direction suggesting the influence of the retinal on the dipole potential upon its incorporation into BLM. The boundary potentials difference measured by the intramembrane field compensation method (IFC) after the retinal addition on one side of the membrane did not exceed 2.5 mV suggesting that its distribution in the bilayer is almost symmetrical. The illumination of the retinal-containing BLM caused a decrease in its lifetime when the membranes were formed from unsaturated lipids. Retinal incorporated into BLM led also to photoinactivation of the gramicidin channels. The process was completely inhibited by a singlet oxygen quencher (sodium azide). These results indicate that retinal accumulated in the membrane can affect both membrane proteins and the unsaturated lipids by their oxidation by the singlet oxygen.     

Effect of glycerol on the capacity and conductivity of lipid bilayer membranes

It is shown that glycerol addition to one side of BLM containing cholesterol leads to a significant decrease of its capacity, and the decrease rate is in indirect proportion to glycerol concentration. Washing out or addition of glycerol to another side results in a full or partial reconstitution of the capacity. The effect of glycerol on the BLM conductivity is manifested in its increase for membranes having specific conductivity above 2.10(-7) Om-1 X cm2. The peculiarity of glycerol is manifested in the fact that during definite period of time (20 +/- 30 min) the membrane is under "stress" condition with the characteristic current fluctuations, which may be compared with its medium meaning. Such condition is preserved up to the moment of BLM rupture. It is supposed that such effects are due to the big-scale reconstructions of membrane structure under the influence of glycerol.