Tannase production by Bacillus licheniformis

Bacillus licheniformis KBR 6 produced maximum extracellular tannase activity at 0.21 U ml^–1 with 1.5% (w/v) tannic acid either in the absence or presence of glucose (1 g l^–1) after 18–21 h growth though the organism did not attain maximum growth until 36 h.     

Optimisation of extracellular tannase production from <Emphasis Type="Italic">Paecilomyces variotii</Emphasis>

The tannase production by Paecilomyces variotii was confirmed by high performance thin layer chromatography (HPTLC), and substrate specificity of the tannase was determined by zymogram analysis in sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS–PAGE). A clear band of activity observed after electrophoresis of culture filtrate in non-denaturing gels indicated the production of extracellular tannase by P. varoitii. HPTLC analysis revealed that gallic acid was the enzymatic degradation product of tannic acid during the fermentation process. The optimum condition for tannase production was at 72 h of incubation in shaking condition and addition of 1.5% tannic acid, 1% glucose and 0.2% sodium nitrate at temperature of 35°C and pH of 5–7. The production of extracellular tannase from Paecilomyces variotii was investigated under optimized conditions in solid-state fermentation (SSF), submerged fermentation (SmF) and liquid surface fermentation (LSF) processes. The maximum extracellular tannase production was obtained within 60 h of incubation under SSF followed by SmF and LSF.     

Tannase production by Aspergillus aculeatus DBF9 through solid-state fermentation

Tannase an industrially important enzyme was produced by Aspergillus aculeatus DBF9 through a solid-state fermentation (SSF). The organism produced good amount of enzyme and gallic acid in wheat bran among the solid substrate used in SSF. Maximum enzyme and gallic acid production occurred in 5% tannic acid after 72 h. Eighty percent initial substrate moisture and 30 degrees C temperature was found suitable for tannase production.     

Pestalotiopsis mangiferae isolated from cocoa leaves and concomitant tannase and gallic acid production

The enzyme tannase is of great industrial and biotechnological importance for the hydrolysis of vegetable tannins, reducing their undesirable effects and generating products for a wide range of processes. Thus, the search for new microorganisms that permit more stable tannase production is of considerable importance. A strain of P. mangiferae isolated from cocoa leaves was selected and investigated for its capacity to produce tannase enzymes and gallic acid through submerged fermentation. The assessment of the variables affecting tannase production by P. mangiferae showed that tannic acid, ammonium nitrate and temperature were the most significant (8.4 U/mL). The variables were analyzed using Response Surface Methodology - RSM (Box-Behnken design), with the best conditions for tannase production being: 1.9% carbon source, 1% nitrogen source and temperature of 23 °C. Tannase activity doubled (16.9 U/mL) after the optimization process when compared to the initial fermentation. A pH of 7.0 was optimal for the tannase and it presented stability above 80% with pH between 4.0 and 7.0 after 2h of incubation. The optimal temperature was 30 °C and activity remained at above 80% at 40–60 °C after 1 h. Production of gallic acid was achieved with 1% tannic acid (0.9 mg/mL) and P. mangiferae had not used up the gallic acid produced by tannic acid hydrolysis after 144 h of fermentation. A 5% tannic acid concentration was the best for gallic acid production (1.6 mg/mL). These results demonstrate P. mangiferae’s potential for tannase and gallic acid production for biotechnological applications.     

Co-production of tannase and gallic acid by a novel Penicillium rolfsii (CCMB 714)

Abstract

A novel tannase and gallic acid-producing Penicillium rolfsii (CCMB 714) was isolated from cocoa leaves from the South of Bahia. The influence of nutritional sources and the simultaneous effect of parameters involved in the fermentation process were available. Tannase (9.97 U?mL^?1) and gallic acid (9?mg mL^?1) production were obtained in 48?h by submerged fermentation in non-optimized conditions. Among the carbon sources, tested gallic acid and tannic acid showed the highest tannase production (p<.05) when compared with methyl gallate and glucose. After optimization using the temperature and tannic acid concentration as variables with the Central Compound Rotational Design (CCRD), the maximal tannase production (25.6?U mL^?1) was obtained at 29.8?°C and 12.7%, respectively, which represents an increase of 2.56 times in relation to the initial activity. The parameters optimized for the maximum production of gallic acid (21.51?mg mL^?1) were 30?°C and 10% tannic acid. P. rolfsii CCMB 714 is a new strain with a high tannase and gallic acid production and the gallic acid produced is very important, mainly for its applications in the food and pharmaceutical industry.     

Production of tannase by solid-state fermentation

An attempt has been made to optimize the production of enzyme tannase by solid state fermentation (SSF) using the organism Rhizopus oryzae. The best favourable conditions for enzyme production include initial pH 5 with 4 days of incubation period at 40°C and 72% humidity, and 10 g wheat bran soaked in 2.5% tannic acid.     

Colorimetric assay method for determination of the tannin acyl hydrolase (EC 3.1.1.20) activity

A new colorimetric method of tannase (tannin acyl hydrolase, EC 3.1.1.20) assay has been developed using its specific substrate tannic acid. It is based on the changes in optical density of substrate tannic acid after enzymatic reaction at 530 nm. The residual tannic acid was measured by a modified BSA precipitation method. This assay is very simple, reproducible, and very convenient, and with it tannase activity can be measured in relation to the growth of the organism.     

Optimization of culture medium for novel cell-associated tannase production from Bacillus massiliensis using response surface methodology

Naturally immobilized tannase (tannin acyl hydrolase, E.C. 3.1.1.20) has many advantages, as it avoids the expensive and laborious operation of isolation, purification, and immobilization, plus it is highly stable in adverse pH and temperature. However, in the case of cell-associated enzymes, since the enzyme is associated with the biomass, separation of the pure biomass is necessary. However, tannic acid, a known inducer of tannase, forms insoluble complexes with media proteins, making it difficult to separate pure biomass. Therefore, this study optimizes the production of cell-associated tannase using a "protein-tannin complex" free media. An exploratory study was first conducted in shake-flasks to select the inducer, carbon source, and nitrogen sources. As a result it was found that gallic acid induces tannase synthesis, a tryptose broth gives higher biomass, and lactose supplementation is beneficial. The medium was then optimized using response surface methodology based on the full factorial central composite design in a 3 l bioreactor. A 2(3) factorial design augmented by 7 axial points (alpha = 1.682) and 2 replicates at the center point was implemented in 17 experiments. A mathematical model was also developed to show the effect of each medium component and their interactions on the production of cell-associated tannase. The validity of the proposed model was verified, and the optimized medium was shown to produce maximum cell-associated tannase activity of 9.65 U/l, which is 93.8% higher than the activity in the basal medium, after 12 h at pH 5.0, 30 degrees C. The optimum medium consists of 38 g/l lactose, 50 g/l tryptose, and 2.8 g/l gallic acid.     

A new process for simultaneous production of tannase and phytase by <Emphasis Type="Italic">Paecilomyces variotii</Emphasis> in solid-state fermentation of orange pomace

The production of enzymes such as tannases and phytases by solid-state fermentation and their use in animal feed have become a subject of great interest. In the present work, Paecilomyces variotii was used to produce tannase and phytase simultaneously. Solid-state fermentation, a process initially designed for tannase production, was implemented here using orange pomace as substrate. Orange pomace is the waste product of the large orange juice industry in Brazil, and it has also been used as an ingredient in animal feed. In addition to enzymatic production, biotransformation of the phenolic content and antioxidant capacity of the orange pomace were analyzed after fermentation. Fermentation conditions, namely moisture level and tannic acid concentration rate, were studied using CCD methodology. The response surface obtained indicated that the highest tannase activity was 5,000 U/gds after 96 h at 59% (v/w) and 3% (w/w) and that of phytase was 350 U/gds after 72 h at 66% (v/w) and 5.8% (w/w) of moisture level and tannic acid concentration, respectively. The amount of tannase production was similar to the levels achieved in previous studies, but this was accomplished with a 7% (w/w) reduction in the amount of supplemental tannic acid required. These results are the first to show that P. variotii is capable of producing phytase at significant levels. Moreover, the antioxidant capacity of orange pomace when tested against the free radical ABTS was increased by approximately tenfold as a result of the fermentation process.     

Tannase production by Paecilomyces variotii

Surface response methodology was applied to the optimization of the laboratory scale production of tannase using a lineage of Paecilomyces variotii. A preliminary study was conducted to evaluate the effects of variables, including temperature ( degrees C), residue (%) (coffee husk:wheat bran), tannic acid (%) and salt solutions (%) on the production of tannase during 3, 5 and 7 days of fermentation. Among these variables, temperature, residues and tannic acid had significant effects on tannase production. The variables were optimized using surface response methodology. The best conditions for tannase production were: temperature (29-34 degrees C); tannic acid (8.5-14%); % residue (coffee husk:wheat bran 50:50) and incubation time of 5 days. The supplementation of external nitrogen and carbon sources at 0.4%, 0.8% and 1.2% concentration on tannase production were studied in the optimized medium. Three different nitrogen sources included yeast extract, ammonia nitrate and sodium nitrate along with carbon source (starch) were studied. Only ammonia nitrate showed a significant effect on tannase production. After the optimization process, the tannase activity increased 8.6-fold.     

Statistical optimization for tannase production from <Emphasis Type="Italic">Aspergillus niger</Emphasis> under submerged fermentation

Statistically based experimental design was employed for the optimization of fermentation conditions for maximum production of enzyme tannase from Aspergillus niger. Central composite rotatable design (CCRD) falling under response surface methodology (RSM) was used. Based on the results of ‘one-at-a-time’ approach in submerged fermentation, the most influencing factors for tannase production from A. niger were concentrations of tannic acid and sodium nitrate, agitation rate and incubation period. Hence, to achieve the maximum yield of tannase, interaction of these factors was studied at optimum production pH of 5.0 by RSM. The optimum values of parameters obtained through RSM were 5% tannic acid, 0.8% sodium nitrate, 5.0 pH, 5 × 10⁷ spores/50mL inoculum density, 150 rpm agitation and incubation period of 48 h which resulted in production of 19.7 UmL⁻¹ of the enzyme. This activity was almost double as compared to the amount obtained by ‘one-at-a-time’ approach (9.8 UmL⁻¹).     

Purification,structural characterization and biotechnological potential of tannase enzyme produced by Enterobacter cloacae strain 41

Tannase production by Enterobacter cloacae strain 41 was investigated under submerged fermentation which was optimized at various circumstances such as pH, temperature, substrate, and agitation, carbon, and nitrogen sources. Tannase was purified by a two-step approach comprising of ion exchange and size exclusion chromatography, respectively. The maximum tannase production was achieved at 1.0% tannic acid concentration, incubation temperature of 50 °C, and initial pH 6.0. The molecular weight of purified tannase was 45 kDa on 10% SDS-PAGE, and it was confirmed by matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry (MS). The enzymatic products of purified tannase were characterized by HPLC, TLC and FT-IR spectroscopy which showed the functional groups such as OH, CO, and CC. The purified tannase retained the activity up to 90% under the condition at 50 °C and pH 6.0 after 1 h incubation. Enzyme kinetics and inhibition studies were also investigated. Cytotoxicity studies showed that the tannase has no cytotoxic effects on Vero cell line. The results indicated the E. cloacae strain 41 would give a potential source for the efficient production of tannase and can be used in tannery effluent degradation, food, and pharmaceutical industrial applications.     

Optimization of tannase biosynthesis by a newly isolated Rhizopus oryzae

A strain isolated locally and identified as Rhizopus oryzae (RO, IIT KGP) was found to synthesise an extracellular enzyme, tanin acyl hydrolase, showing its degradability of tannic acid to gallic acid. For maximizing the enzyme secretion in the fermented broth, the influencing parameters were optimized in shake flask culture. Experiments showed that modified Czapek dox medium with 2% tannic acid, 1% glucose, 0.05% sodium nitrate incubated for 4 days with 2 days old inoculum was the optimum for the synthesis of tannase by Rhizopus oryzae (RO, IIT KGP). Maximum enzyme activity was found to be 6.12 U/ml.     

Production and characterization of tannase from Bacillus cereus KBR9

A tannase-producing soil bacteria has been isolated and identified as Bacillus cereus. It can degrade tannic acid and produce maximum tannase (0.22 U/ml) at stationary phases of growth (24 h). Maximum growth and enzyme production occurred with initial medium pH of 4.5-5.0. Partial purified tannase showed optimum activity at pH 4.5 and 40 degrees C. It remains stable up to 30 degrees C and pH 4.5 to 5.0. The enzyme is salt tolerant, stable up to 2 m of NaCl and retains 82% original activity in 3 m.     

Tamarind seed powder and palm kernel cake: two novel agro residues for the production of tannase under solid state fermentation by Aspergillus niger ATCC 16620

Palm kernel cake (PKC), the residue obtained after extraction of palm oil from oil palm seeds and tamarind seed powder (TSP) obtained after removing the fruit pulp from tamarind fruit pod were tested for the production of tannase under solid-state fermentation (SSF) using Aspergillus niger ATCC 16620. The fungal strain was grown on the substrates without any pretreatment. In PKC medium, a maximum enzyme yield of 13.03 IU/g dry substrate (gds) was obtained when SSF was carried out at 30 degrees C, 53.5% initial substrate moisture, 33 x 10(9) spores/5 g substrate inoculum size and 5% tannic acid as additional carbon source after 96 h of fermentation. In TSP medium, maximum tannase yield of 6.44 IU/gds was obtained at 30 degrees C, 65.75% initial substrate moisture, 11 x 10(9) spores/5 g substrate inoculum, 1% glycerol as additional carbon source and 1% potassium nitrate as additional nitrogen source after 120 h of fermentation. Results from the study are promising for the economic utilization and value addition of these important agro residues, which are abundantly available in many tropical and subtropical countries.     

Solid state fermentation of Bacillus gottheilii M2S2 in laboratory-scale packed bed reactor for tannase production

Abstract

Production of tannase was performed in packed bed reactor filled with an inert support polyurethane foam (PUF) using Bacillus gottheilii M2S2. The influence of process parameters such as fermentation time (24–72?h), tannic acid concentration (0.5–2.5% w/v), inoculum size (7–12% v/v), and aeration rate (0–0.2?L/min) on tannase production with PUF were analyzed using one variable at a time (OVAT) approach. The outcome of OVAT was optimized by central composite design. Based on the statistical investigation, the proposed mathematical model recommends 1% (w/v) of tannic acid, 10% (v/v) of inoculum size and 0.13?L/min of aeration rate for maximum production (76.57?±?1.25?U/L). The crude enzyme was purified using ammonium sulfate salt precipitation method followed by dialysis. The biochemical properties of partially purified tannase were analyzed and found the optimum pH (4.0), temperature (40?°C) for activity, and K_m (1.077?mM) and V_max (1.11?µM/min) with methyl gallate as a substrate. Based on the SDS-PAGE analysis, tannase exhibited two bands with molecular weights of 57.5 and 42.3?kDa. Briefly, the partially purified tannase showed 4.2 fold increase (63?±?1.60?U/L) in comparison to the submerged fermentation and the production of tannase was validated by using NMR spectrometer.     

1株产单宁酶细菌的分离鉴定及产酶条件研究

从富含单宁酸的土壤中分离筛选出1株产单宁酶的细菌,经过菌落形态观察和16S rDNA分子生物学鉴定,该细菌为肺炎克雷伯菌。对该菌所产胞外单宁酶的发酵条件进行了初步研究,得出最佳产酶条件：培养温度37℃,培养时间36 h,培养转速180 r/min,单宁酸含量2 g/L,最佳碳源为葡萄糖,最佳氮源为氯化铵,此时所产单宁酶活力为0.8 U/mL。     

Effects of inoculum concentration,temperature, and carbon sources on tannase production during solid state fermentation of cashew apple bagasse

In this study, the optimization of tannase production by solid state fermentation was investigated using cashew apple bagasse (CAB), an inexpensive residue produced by the cashew apple agroindustry, as a substrate. To accomplish this, CAB was enriched with 2.5% (w/w) tannic acid and 2.5% (w/w) ammonium sulphate and then moistened with water (60 mL/100 g of dry CAB). The influence of inoculum concentration (10⁴ to 10⁷ spores/g), temperature (20, 25, 30, and 35°C) and several additional carbon sources (glucose, starch, sucrose, maltose, analytical grade glycerol, and glycerol produced during biodiesel production) on enzyme production by Aspergillus oryzae was then evaluated. Supplementation with maltose and glycerol inhibited tannase synthesis, which resulted in lower enzyme activity. Starch and sucrose supplementation increased enzyme production, but decreased the enzyme productivity. The maximum tannase activity (4.63 units/g of dry substrate) was obtained at 30°C, using 10⁷ spores/g and 1.0% (w/v) sucrose as an additional carbon source.     

Optimization of cultural conditions for tannase production by Pseudomonas aeruginosa IIIB 8914 under submerged fermentation

A tannase yielding bacterial strain was isolated from soil sample collected from the area situated nearby small-scale tannery. It was identified as Pseudomonas aeruginosa IIIB 8914. The bacterial strain produced extra-cellular tannase under sub-merged fermentation (Smf) using amla (Phyllanthus emblica), keekar (Acacia nilotica), jamoa (Eugenia cuspidate) and jamun (Syzygium cumini) leaves. Among different substrates, amla and keekar leaves resulted in maximal extra-cellular production of tannase. Various process parameters were studied to optimize the extra-cellular yield of tannase under Smf. Maximum yield of tannase i.e., 13.65 and 12.90 U/ml was obtained when Smf was carried out using amla and keekar leaves (2% w/v) respectively in minimal media supplemented with MgSO₄·7H₂O (amla)/HgCl₂ (keekar), NH₄NO₃ and 0.2% Tween 80; inoculated with 2% cell suspension, and incubated at 37°C for 24 h. The bacterial strain produced about 2 times (13.65 U/ml) higher yield of tannase than the highest reported yield of tannase (6 U/ml). Our finding suggests that agro residues in the form of amla and keekar leaves can be one of the best and cost effective alternatives to the costly pure tannic acid for industrial production of microbial tannase.     

Distribution of tannic acid degrading microorganisms in the soil and comparative study of tannase from two fungal strains

A quantitative survey on microbial population including tannase producing organisms have been made from different soil samples. Most of the samples harbour negligible number of tannase producers in comparison to total microbial flora. Among the tannase producers, fungal members are more frequent than bacteria. Tannase production and tannic acid degradation have been studied in two newly isolated potent fungal strains. Both the strains produce maximum tannase at their stationary phases of growth. Enzymes produced by both the strains remain active within pH 3.5-6.0 and temperature 30-60 degrees C.