Human fibroblast culture on a crosslinked dermal porcine collagen matrix

The use of a novel porcine-derived collagen biomaterial as a dermal tissue engineering matrix was examined. The matrix is derived from porcine dermis, and is processed to retain the native collagen (Type 1) and elastin structure. Human primary fibroblasts were cultured on the matrix to examine its potential for creating a dermal replacement. Attachment of fibroblasts on the collagen was compared to tissue culture plastic and PET membranes. Cell proliferation was assessed using the MTT assay and DAPI staining. For seeding densities of 5×10⁴ and 1×10⁵ cells cm⁻², PET and plastic demonstrated >95% attachment of seeded numbers after 3 h. The collagen matrix reached levels >80% after 3–4 h with no influence of the seeding density. Matrix samples with perforating pores of 40 μm diameter were also studied. After 216 h culture in static culture, with media replacement every 3 days, the final cell numbers reached 2.1×10⁵ (perforated) and 2.0×10⁵ cells cm⁻² (unperforated). In comparison fibroblast culture in a perfusion bioreactor, with continuous media replacement, reached 2.3×10⁵ (unperforated) and 2.5×10⁵ cells cm⁻² (perforated) after 216 h.     

Kinetics of laccase-catalysed TEMPO oxidation

The oxidation of TEMPO (2,2,6,6-tetramethyl-piperidine-1-oxyl radical) has been studied in the presence of recombinant laccases (benzenediol:oxygen oxidoreductase, EC 1.10.3.2) from Polyporus pinsitus (rPpL), Myceliophthora thermophila (rMtL), Coprinus cinereus (rCcL) and Rhizoctonia solani (rRsL) in buffer solution pH 4.5–7.3 and at 25 °C. At pH 5.5 the oxidation constant calculated from the initial rate of TEMPO oxidation was 1.7 × 10⁴, 1.4 × 10³, 7.8 × 10² and 5.2 × 10² M⁻¹ s⁻¹ for rPpL, rRsL, rCcL and rMtL, respectively. The maximal activity of rPpL-catalysed TEMPO oxidation was at pH 5.0. The pK_a obtained in neutral pH range was 6.2. The reactivity of laccases is in a good agreement with laccases copper type I redox potential.

TEMPO oxidation rate increased 541 times in the presence of 10-(3-propylsulfonate) phenoxazine (PSPX). The model of synergistic TEMPO and PSPX oxidation was proposed. Experimentally obtained rate constants for rPpL-catalysed PSPX oxidation were in a good agreement with those calculated from the synergistic model, therefore confirming the feasibility of the model. The acceleration of TEMPO oxidation with high reactive laccase substrates opens new possibilities for TEMPO application as a mediator.     

Estradiol inhibits the estrone sulfatase activity in normal and cancerous human breast tissues

It is well accepted that estradiol (E₂) plays an important role in the genesis and evolution of breast cancer. Quantitative evaluation indicates that in human breast tumor, estrone sulfate (E₁S) ‘via sulfatase’ is a much more likely precursor for E₂ than is androstenedione ‘via aromatase’. In previous studies, it was demonstrated that in isolated MCF-7 and T-47D breast cancer cell lines, estradiol can block estrone sulfatase activity. In the present study, the effect of E₂ was explored using total normal and cancerous breast tissues. This study was carried out with post-menopausal patients with breast cancer. None of the patients had a history of endocrine, metabolic or hepatic diseases or had received treatment in the previous 2 months. Each patient received local anaesthetic (lidocaine 1%) and two regions of the mammary tissue were selected: (A) the tumoral tissue and (B) the distant zone (glandular tissue) which was considered as normal. Samples were placed in liquid nitrogen and stored at –80 °C until enzyme activity analysis. Breast cancer histotypes were ductal and post-menopausal stages were T2. Homogenates of tumoral or normal breast tissues (45–75 mg) were incubated in 20 mM Tris–HCl, pH 7.2 with physiological concentrations of [³H]-E₁S (5 × 10⁻⁹ M) alone or in the presence of E₂ (5 × 10⁻⁵ to 5 × 10⁻⁷ M) during 30 min or 3 h. E₁S, E₁ and E₂ were characterized by thin layer chromatography and quantified using the corresponding standard. The sulfatase activity is significantly more intense with the breast cancer tissue than normal tissue, since the concentration of E₁ was 3.20 ± 0.15 and 0.42 ± 0.07 pmol/mg protein, respectively after 30 min incubation. The values were 27.8 ± 1.8 and 3.5 ± 0.21 pmol/mg protein, respectively after 3 h incubation. Estradiol at the concentration of 5 × 10⁻⁷ M inhibits this conversion by 33% and 31% in cancerous and normal breast tissues, respectively and by 53% and 88% at the concentration of 5 × 10⁻⁵ M after 30 min incubation. The values were 24% and 18% for 5 × 10⁻⁷ M and 49% and 42% for 5 × 10⁻⁵ M, respectively after 3 h incubation. It was observed that [³H]-E₁S is only converted to [³H]-E₁ and not to [³H]-E₂ in normal or cancerous breast tissues, which suggests a low or no 17β-hydroxysteroid dehydrogenase (17β-HSD) Type 1 reductive activity in these experimental conditions. In conclusion, estradiol is a strong anti-sulfatase agent in cancerous and normal breast tissues. This data can open attractive perspectives in clinical trials using this hormone.     

Radical-scavenging activity of butylated hydroxytoluene (BHT) and its metabolites

To clarify the radical-scavenging activity of butylated hydroxytoluene (BHT), a food additive, stoichiometric factors (n) and inhibition rate constants (k_inh) were determined for 2,6-di-tert-butyl-4-methylphenol (BHT) and its metabolites 2,6-di-tert-butyl-p-benzoquinone (BHT-Q), 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHA-CHO) and 3,5-di-tert-butyl-4-hydroperoxy-4-methyl-2,5-cyclohexadiene-1-one (BHT-OOH). Values of n and k_inh were determined from differential scanning calorimetry (DSC) monitoring of the polymerization of methyl methacrylate (MMA) initiated by 2,2′-azobis(isobutyronitrile) (AIBN) or benzoyl peroxide (BPO) at 70 °C in the presence or absence of antioxidants (BHT-related compounds). The n values declined in the order BHT (1–2) > BHT-CHO, BHT-OOH (0.1–0.3) > BHT-Q (0). The n value for BHT with AIBN was approximately 1.0, suggesting dimerization of BHT. The k_inh values declined in the order BHT-Q ((3.5–4.6)×10⁴ M⁻¹ s⁻¹) > BHT-OOH (0.7–1.9×10⁴ M⁻¹ s⁻¹) > BHT-CHO ((0.4–1.7)×10⁴ M⁻¹ s⁻¹) > BHT ((0.1–0.2)×10⁴ M⁻¹ s⁻¹). The k_inh for metabolites was greater than that for the parent BHT. Growing MMA radicals initiated by BPO were suppressed much more efficiently by BHT or BHT-Q compared with those initiated by AIBN. BHT was effective as a chain-breaking antioxidant.     

Detection of Mycobacterium immunogenum by real-time quantitative Taqman PCR

A quantitative real-time 5′-nuclease (Taqman) PCR technique was developed to specifically detect Mycobacterium immunogenum. rpoB-specific primers and Taqman probe were evaluated for detection of M. immunogenum DNA extracted from pure cultures and from industrial metal working fluids (MWFs). Specificity was confirmed and the sensitivity of detection of M. immunogenum genomic DNA was shown to be approximately 9 fg (2 cell equivalents). When tested on industrial metal working fluids from the UK and USA from which no M. immunogenum CFU were recovered, the assay detected between 3.4 × 10¹ and 1.9 × 10⁴ cell equivalents (CE) per ml, and increased the detection rate over culture to 37.5% (12 of 32 samples). This assay provides a specific, sensitive and rapid method for the detection of M. immunogenum and is applicable within industry for the early detection of this human pathogen and to the possible prevention of hypersensitivity pneumonitis (HP) in workers.     

Electrochemical impedance spectroscopy for study of aptamer-thrombin interfacial interactions

A simple and highly sensitive electrochemical impedance spectroscopy (EIS) biosensor based on a thrombin-binding aptamer as molecular recognition element was developed for the determination of thrombin. The signal enhancement was achieved by using gold nanoparticles (GNPs), which was electrodeposited onto a glassy carbon electrode (GCE), as a platform for the immobilization of the thiolated aptamer. In the measurement of thrombin, the change in interfacial electron transfer resistance of the biosensor using a redox couple of [Fe(CN)₆]^3−/4− as the probe was monitored. The increase of the electron transfer resistance of the biosensor is linear with the concentration of thrombin in the range from 0.12 nM to 30 nM. The association and dissociation rate constants of the immobilized aptamer–thrombin complex were 6.7 × 10³ M⁻¹ s⁻¹ and 1.0 × 10⁻⁴ s⁻¹, respectively. The association and dissociation constants of three different immobilized aptamers binding with thrombin were measured and the difference of the dissociation constants obtained was discussed. This work demonstrates that GNPs electrodeposited on GCE used as a platform for the immobilization of the thiolated aptamer can improve the sensitivity of an EIS biosensor for the determination of protein. This work also demonstrates that EIS method is an efficient method for the determination of association and dissociation constants on GNPs modified GCE.     

Structure of Co2(CO)6(dppm) and Co2(CO)5(CHCO2Et)(dppm) (dppm = Ph2PCH2PPh2) and exchange reaction with CO: An experimental and computational study

Crystal structures of Co₂(CO)₆(dppm) (1) and Co₂(CO)₅(CHCO₂Et)(dppm) (2) (dppm = Ph₂PCH₂PPh₂) show asymmetry with respect to the orientation of the phenyl groups in 1 and owing to the bridging ethoxycarbonylcarbene ligand in 2. The effect of this asymmetry was recognized in the solid-state ³¹P NMR spectra of 1 and 2 and in the solid-state and solution ¹³C NMR spectra of 2 as well, but not in the solid-state and solution ¹³C NMR spectra of 1. In CH₂Cl₂ solution under an atmosphere of ¹³CO, the CO ligands of both complexes exchange with ¹³CO. The overall rate of ¹³CO exchange at 10 °C was found to be k_obs = 0.107 × 10⁻³ s⁻¹ for 1 and k_obs = 0.243 × 10⁻³ s⁻¹ for 2. Two-layered ONIOM(B3LYP/6-31G(d):LSDA/LANL2MB) studies revealed fluxional behavior of 1 with rather small barriers of activation of the rearrangements. Four possible isomers have been computed for 2, close to each other energetically.     

Effects of environmental factors, age and genotype on sperm production and semen quality in Bos indicus and Bos taurus AI bulls in Brazil

The effects of ambient temperature and humidity, month, age and genotype on sperm production and semen quality in AI bulls in Brazil were evaluated. Data from two consecutive years were analyzed separately. Seven Bos indicus and 11 Bos taurus bulls from one artificial insemination (AI) center were evaluated in Year 1 and 24 B. indicus and 16 B. taurus bulls from three AI centers were evaluated in Year 2. Ambient temperature and humidity did not significantly affect sperm production and semen quality, probably because there was little variation in these variables. Month accounted for less than 2% of the variation in sperm production and semen quality. Increased bull age was associated with decreased sperm motility (P<0.10) and increased minor sperm defects (P<0.001) in Year 1. B. indicus bulls had greater (P<0.005) sperm concentration than B. taurus bulls in both years (1.7×10⁹/ml versus 1.2×10⁹/ml in Year 1 and 1.6×10⁹/ml versus 1.2×10⁹/ml in Year 2, respectively). Ejaculate volume was not significantly affected by genotype in Year 1 (6.6 ml versus 6.9 ml in B. indicus and B. taurus bulls, respectively), but B. indicus bulls had greater (P<0.05) total (11.4×10⁹ versus 8.2×10⁹) and viable (6.7×10⁹ versus 4.9×10⁹) numbers of spermatozoa in the ejaculate than B. taurus bulls. In Year 2, B. taurus bulls had greater (P<0.05) ejaculate volume than B. indicus bulls (8.2 ml versus 6.7 ml, respectively) and total and viable number of spermatozoa in the ejaculate were not significantly different between genotypes (10.3×10⁹ versus 9.1×10⁹ and 6.1×10⁹ versus 5.4×10⁹ in B. indicus and B. taurus bulls, respectively). Sperm motility was not significantly affected by genotype (mean, 59%). In Year 1, B. indicus bulls tended (P<0.10) to have more major sperm defects and had more (P<0.05) total sperm defects than B. taurus bulls (11.8% versus 8.7% and 13.6% versus 10.0%, respectively). In Year 2, B. indicus bulls tended (P<0.10) to have more total sperm defects than B. taurus bulls (16.2% versus 13.3%, respectively). In conclusion, neither ambient temperature and humidity nor month (season) significantly affected sperm production and semen quality. B. indicus bulls had significantly greater sperm concentration and B. taurus bulls had significantly fewer morphologically defective spermatozoa.     

Lack of effect of the nematophagous fungus Duddingtonia flagrans on the development of the dung beetle, Aphodius constans

The nematode-trapping fungus Duddingtonia flagrans may be used as a biological control agent of gastro-intestinal nematode larvae of ruminants by feeding the hosts with fungal spores. This trial was intended to search an eventual detrimental impact of the presence of spores of D. flagrans in high numbers in goat feces on the common dung beetle, Aphodius constans (Coleoptera: Aphodiidae). A. constans eggs were settled in feces derived from grazing goats fed spores at daily dose rates of 0, 0.25 × 10⁶, 0.5 × 10⁶ or 10⁶ spores/kg BW. At the end of the incubation period, the number of adults that have emerged from eggs were counted and compared between dose rates. No difference in emergence rate between treatments can be seen. The presence of D. flagrans spores in goat feces, even in large numbers, did not alter the development of A. constans.     

Detection of Campylobacter jejuni in poultry samples using an enzyme-linked immunoassay coupled with an enzyme electrode.

An enzyme-linked immunoassay coupled with a tyrosinase modified enzyme electrode was used for rapid detection of Campylobacter jejuni. The immunomagnetic separation (IMS) method was investigated to achieve optimal isolation of C. jejuni cells. Eight types of beads with three different sizes and function groups were coated with anti-C. jejuni to isolate C. jejuni from the sample solution. Bead size and coating methods were found to be major factors that influenced the capture efficacy. Streptavidin-labeled beads (2.8 μm) provided the greatest capture ability. Three blocking reagents were tested to minimize non-specific binding. Bovine serum albumin (BSA) showed the best blocking capability. Two IMS formats were tested. Competitive immunoassay cut the detection time to 1.5 h, but the detection limit was relatively high (10⁶ CFU/ml). This system was evaluated using C. jejuni pure culture and poultry samples inoculated with C. jejuni. This detection method for C. jejuni could be completed within 2.5 h and had a detection limit of 2.1×10⁴ CFU/ml. No significant difference was found between pure culture samples and poultry samples (P>0.01). A linear relationship was found between C. jejuni cell numbers and the peak current ratio in a range of 10²–10⁷ CFU/ml (R²=0.94).     

Recurrent Pseudo-nitzschia calliantha (Bacillariophyceae) and Alexandrium insuetum (Dinophyceae) winter blooms induced by agricultural runoff

A winter bloom dominated by Pseudo-nitzschia calliantha Lundholm, Moestrup et Hasle (Bacillariophyceae), a potential domoic acid producer, is reported for the first time in the Aegean Sea, Greece, in a semi-enclosed embayment (Kalloni Gulf) surrounded by agricultural land and drained by intermittent rivers. Abundances of this species in the inner part of the Gulf during February were extremely high (max 1.1 × 10⁷ cells l⁻¹). The species Alexandrium insuetum Balech (Dinophyceae) was also found in considerable cell numbers (max 1.4 × 10⁵ cells l⁻¹) during the bloom and reached up to 40% of the total biovolume. This study demonstrates an evident cause and effect relationship between nutrient inflows originating from agricultural activities in the watershed and the development of a potential HAB. The massive bloom formation was observed soon after an episodic rainfall event during the fertilizer application period (December to February). A bloom was also observed the following year, but it was less pronounced due to the fact that rainfalls were more evenly spaced in time and were of moderate intensity.     

In situ, in-liquid, all-electrical detection of Salmonella typhimurium using lead titanate zirconate/gold-coated glass cantilevers at any dipping depth

Most biosensing techniques are indirect, slow, and require labeling. Even though silicon-based microcantilever sensors are sensitive and label-free, they are not suitable for in-liquid detection. More recently lead zirconate titanate (PZT) thin-film-based microcantilevers are shown to be sensitive and in situ. However, they require microfabrication and must be electrically insulated. In this study, we show that highly sensitive, in situ, Salmonella typhimurium detection can be achieved at 90% relative humidity using a lead zirconate titanate (PZT)/gold-coated glass cantilever 0.7 mm long with a non-piezoelectric 2.7 mm long gold-coated glass tip by partially dipping the gold-coated glass tip in the suspension at any depth without electrically insulating the PZT. In particular, we showed that at 90% relative humidity and with a dipping depth larger than 0.8 mm the PZT/gold-coated glass cantilever showed virtually no background resonance frequency up-shift due to water evaporation and exhibited a mass detection sensitivity of Δm/Δf = −5 × 10⁻¹¹ g/Hz. The concentration sensitivities of this PZT/gold-coated glass cantilever were 1 × 10³ and 500 cells/ml in 2 ml of liquid with a 1 and 1.5 mm dipping depth, respectively, both more than two orders of magnitude lower than the infectious dose and more than one order of magnitude lower than the detection limit of a commercial Raptor sensor.     

Isolation and characterization of soluble sulfated polysaccharide from the red seaweed Gracilaria cornea

The composition, structure and rheological properties of a soluble sulfated polysaccharide from Gracilaria cornea (Brazilian red marine alga) were investigated. Agarocolloid yield, intrinsic viscosity, monosaccharide composition, sulfate and cation content as well as molecular weight were determined. The main polysaccharide components were 3,6-anhydrogalactose (24.7%) and galactose (64.6%). In addition, minor components such as 6-O-methyl-galactose (8.5%), glucose (1.5%), xylose (0.7%) and sulfated groups (4.8%) were detected. Comparison between sulfate contents determined by Fourier transform IR (FT-IR) spectroscopy and microelemental analysis was made. Data from ¹³C NMR and FT-IR provided evidence of sulfation in C-4 and C-6 of galactose. Sodium, calcium, magnesium and potassium cations were detected in the agarocolloid. The intrinsic viscosities were lower than typical values for agar in the same experimental conditions. No gelation in 1.5, 2.0 and 3.0% (w/v) aqueous solution was observed, even by cooling up to 4 °C. Gel permeation chromatography indicated two major polysaccharide fractions of M_pk 7.4×10⁴ and 1.8×10⁴ g/mol and a minor fraction of M_pk 2.1×10⁶ g/mol, probably a protein–polysaccharide complex.     

Graft copolymerization of acrylic acid onto guar gum initiated by vanadium (V)–mercaptosuccinic acid redox pair

Guar gum has been modified by graft copolymerization with acrylic acid in aqueous medium using vanadium (V)–mercaptosuccinic acid redox system. The optimum reaction conditions affording maximum grafting ratio, efficiency, add on and conversion have been determined. The grafting parameters have been found to increase with increase in vanadium (V) concentration upto 1.0 × 10⁻² mol dm⁻³, but these parameters decrease on further increasing the vanadium (V) concentration. On increasing the mercaptosuccinic acid concentration from 1.0 × 10⁻² to 4.0 × 10⁻² mol dm⁻³ grafting ratio, efficiency and add on increase up to 2.0 × 10⁻² mol dm⁻³ but decrease with further increase in mercaptosuccinic acid concentration. On varying the acrylic acid concentration from 5.0 × 10⁻² to 30.0 × 10⁻² mol dm⁻³, maximum grafting ratio, efficiency and add on have been obtained at 20.0 × 10⁻² mol dm⁻³. The grafting ratio, add on and conversion increase, on increasing the H⁺ ion concentration from 1.5 × 10⁻¹ to 6.0 × 10⁻¹ mol dm⁻³. On increasing the guar gum concentration the grafting parameters increase. The grafting ratio, add on and conversion have been found to increase with time period while efficiency started decreasing after 120 min. It has been observed that %G increases on increasing the temperature up to 35 °C. The graft copolymer has been characterized by IR spectroscopy and thermogravimetric analysis.     

A method for the design of 3D scaffolds for high-density cell attachment and determination of optimum perfusion culture conditions

The application of in vitro cultured cells in tissue engineering or drug screening, aimed at complex soft tissues such as liver, requires in vivo physiological function of the cultured cells. For this purpose, the scaffold in which cells are cultured should provide a microenvironment similar to an in vivo one with a three-dimensional extracellular matrix, a high supply capacity of O₂ and nutrients, and high cell density. In this paper, we propose a method to design (1) the geometry of the scaffold, with a surface/volume ratio optimized to allow high-density (5×10⁷ cells/mL) cell culture and (2) culture conditions that will supply optimal quantities of oxygen and nutrients. CFD modeling of mass transport was used to determine the shear stress as well as O₂ and glucose metabolism in the scaffold (20 mm width–35 mm length) for various flow rates. Validation of the model was done through comparison with flow resistance and micro-PIV experiments. CFD analysis showed the maximum metabolic rate densities for this scaffold are 6.04×10⁻³ mol/s/m³ for O₂ at 0.71 mL/min and 1.91×10⁻² mol/s/m³ for glucose at 0.35 mL/min.     

Mutational spectrum of the lacI gene in Escherichia coli K12 induced by low-energy ion beam

The mutational spectrum of the genomic lacI gene induced by low-energy nitrogen ion irradiation in wild type Escherichia coli strain W3110 were compared with the spontaneous and the vacuum controls. The mutant frequency of irradiated group was dose-dependent and reached 26.3 × 10⁻⁶ at dose of 31.2 × 10¹⁴ ions/cm², which was about 18-fold over the background (1.5 × 10⁻⁶) and 10-fold over the vacuum controls (2.6 × 10⁻⁶). This result indicated that the low-energy ion irradiation was one of many effective mutagens, though the vacuum condition of low-energy ions contributed some low-level gene mutations. It was found that the difference between the spontaneous and the vacuum control was the increases of base-pair substitutions in the vacuum control group. The spectra of irradiated group were quite similar to that of oxygen free-radical induced in the same strain, suggesting free-radicals and other adducts generated by low-energy ions might play an important role in the mutagenesis in vivo. When the spontaneous and the vacuum control group were compared, base-pair substitutions, deletions and additions of the irradiated group were significantly increased, and the +TGGC or −TGGC at hot spot was decreased from 82 to 48%. But the remarkable increase in absolute MF of the +TGGC or −TGGC at hot spot in the irradiated group suggested that low-energy ions did induce the mutations of this type. The spectra of our irradiated group had relative low-level base-pair substitutions, high-level ±TGGC and high proportion additions than those of γ-radiation induced, implying there were some different effects or processes between them.     

Optimizing the formulation of a myoglobin molecularly imprinted thin-film polymer--formed using a micro-contact imprinting method

Thin-film myoglobin molecularly imprinted polymers have been fabricated using a micro-contact approach. By initially selecting the cross-linker on the basis of it having a minimal recognition for the template and using this as a starting point for functional monomer selection, we have produced myoglobin imprinted polymers with exceptionally high selectivities.

The affinity of the polymers, for myoglobin, when prepared with a variety of different cross-linkers and no functional monomer was evaluated. Of these, tetraethylene glycol dimethacrylate (TEGDMA) exhibited the lowest affinity for the template species. Methyl methacrylate (MMA) was chosen as the functional monomer as when it was used in conjunction with TEGDMA, it exhibited maximum selectivity for the template compared to polymers made with other functional monomers.

With a MMA to TEGDMA ratio of 1 to 3, the myoglobin molecularly imprinted polymer adsorbed 15.03 ± 0.89 × 10⁻¹¹ mole/cm² of template from a 5.68 × 10⁻⁷ M myoglobin solution, compared to 2.58 ± 0.02 × 10⁻¹¹ mole/cm² for a polymer of similar composition, but formed in the absence of a template. Various washing conditions, using alkaline media to remove the template, were investigated. An extraction solvent comprising 2 wt.% SDS and 0.6 wt.% NaOH used at 80 °C for 30 min was shown to give the highest imprinting factor i.e. 5.83 with 72.82% myoglobin removal.

The saturation kinetics of template binding to the thin-film MIP were examined and found to display a simple two-phase profile typical of non-cooperative binding. A Scatchard binding plot showed the dissociation constant (K_d) for the specific binding phase to be 3.4 × 10⁻⁷ M and the binding site capacity to be 7.24 × 10⁻¹¹ mole/cm². For the non-specific binding phase, K_d was found to be 1.355 × 10⁻⁵ M and the binding site capacity was determined as 9.62 × 10⁻¹⁰ mole/cm².

Selectivity experiments were carried out in both single protein and binary protein systems all using a total protein concentration of 5.68 × 10⁻⁷ M. The molar ratio of adsorbed myoglobin to IgG, HSA and hemoglobin was found to 115.5, 230.9 and 2.5, respectively. While, in binary competition systems, myoglobin selectivity to IgG, HSA and hemoglobin was, respectively, 94.18, 98.21 and 61.09%. Rebinding in natural biological matrices, i.e. human serum or urine, showed the imprinted films to have significantly greater uptake than non-imprinted films. Re-binding in undiluted urine was found to be a facile process, with the imprinting factor, i.e. the ratio of MIP to NIP binding, being determined as 37.4.     

Alexandrium catenella and Alexandrium minutum blooms in the Mediterranean Sea: Toward the identification of ecological niches

Annual recurrent blooms of the toxic dinoflagellates Alexandrium catenella and Alexandrium minutum were detected from 2000 to 2003 in harbours along the Catalan coast. The interrelation study between the occurrence of the blooms and specific external conditions at the study sites demonstrated that different factors are required for the bloom of each Alexandrium species. Concentrations higher than 10⁵ cells l⁻¹ of A. catenella were only detected in Tarragona harbour. These blooms were associated with water surface temperature between 21 and 25 °C and salinities of around 34 psu or higher than 37 psu. A. minutum appeared widely spread along the Catalan coast, though the most intensive and recurrent blooms of this species were observed in Arenys de Mar harbour. Concentrations of millions of cells per litre of A. minutum were associated with water temperatures below 14 °C and salinities of around 34–36 psu. A. minutum cell densities showed a positive significant correlation with NO₃ but a negative correlation with NH₄. On the other hand, A. catenella blooms dominated when both NO₃ and NH₄ levels were high. The prevailing inorganic nitrogen form (NO₃ vs. NH₄) could explain why these two species rarely coincide in the same harbours. Accumulation of cysts in the sediment was found to be an important potential factor for the recurrence of these species. The 4.3 × 10³ A. catenella cysts cm⁻³ of wet sediment in Tarragona harbour and the 3.02 × 10³ A. minutum cysts cm⁻³ of wet sediment in Vilanova harbour were the highest concentrations observed from the cyst study. Confined waters such as harbours play an important role as reservoirs for the accumulation of cysts and vegetative cells, which contributes to the expansion of these dinoflagellates in the region. However, the particular environmental conditions are also decisive factors of bloom intensity.     

DNA binding and nuclease activity of a one-dimensional heterometallic nitrosyl complex

The interaction of a structurally characterized Sr–Fe nitrosyl complex with DNA has been studied by UV–vis and fluorescence spectroscopy, viscometric, and gel electrophoresis techniques. From the absorption titration studies the intrinsic binding constant of the complex with DNA was calculated to be 1.6 × 10⁴ M⁻¹. Fluorimetric studies indicate that the complex compete with EB in binding to DNA. The complex shows nuclease activity on pUC19 supercoiled DNA in presence of H₂O₂.     

Synthesis of graft copolymer (k-carrageenan-g-N,N-dimethylacrylamide) and studies of metal ion uptake, swelling capacity and flocculation properties

Graft copolymer of k-carrageenan and N,N-dimethylacrylamide has been synthesized by free radical polymerization using peroxymonosulphate/glycolic acid redox pair in an inert atmosphere. The grafting parameters i.e. grafting ratio, add on and efficiency decrease with increase in concentration of k-carrageenan from 0.6 to 1.4 g dm⁻³ and hydrogen ion from 3 × 10⁻³ to 7 × 10⁻³ mol dm⁻³, but these grafting parameters increase with increase in concentration of N,N-dimethylacrylamide from 16 × 10⁻² to 32 × 10⁻² mol dm⁻³, and peroxymonosulphate from 0.8 × 10⁻² to 2.4 × 10⁻² mol dm⁻³. The metal ion sorption, swelling behaviour and flocculation properties have been studied. The intrinsic viscosity of pure and grafted samples has been measured by using Ubbelohde capillary viscometer. Flocculation capability of k-carrageenan and k-carrageenan-g-N,N-dimethylacrylamide for both coking and non-coking coals has been studied for the treatment of coal mine waste water. The graft copolymer has been characterized by Infrared (IR) spectroscopy and thermogravimetric analysis.