Kinetics of refolding of reduced ribonuclease

The kinetics of disulphide bond formation in reduced ribonuclease have been determined by following electrophoretically the appearance and disappearance of protein molecules with one, two, three or four intramolecular disulphide bonds. Each successive protein disulphide bond was observed to be formed much less readily than the preceding one, and the resulting species are increasingly unstable to reduction of their disulphide bonds. Most of the species formed directly, even those with four disulphide bonds, do not have the electrophoretic mobility of native protein.Protein molecules apparently refolded correctly are formed by slow intramolecular interconversion of molecules with three disulphide bonds and by thiolcatalyzed interchange of incorrect disulphide bonds in three-or four-disulphide species.These observations are compared with the properties of the folding pathway elucidated for pancreatic trypsin inhibitor under the same conditions and are contrasted with those often envisaged as to how proteins might fold.     

On the relevance of non-random polypeptide conformations for protein folding

The possibility that any non-random conformation in reduced bovine pancreatic trypsin inhibitor (BPTI) and ribonuclease A might be significant for folding has been considered, using the experimental data available on forming the first disulphide bond in each. It is a thermodynamic necessity that whatever conformation stabilises a particular disulphide bond be stabilised to the same extent by the presence of the disulphide. The stabilising effects of disulphides are known approximately, so the stability of any non-random conformation found in a one-disulphide intermediate can be estimated in the absence of the disulphide bond. The non-random conformation in the BPTI intermediates is sufficiently labile to indicate that it would be expected to be present in no more than 5% of the reduced BPTI molecules. There is much less non-random conformation apparent in ribonuclease A. Whatever conformations are represented in the bulk of these two reduced proteins cannot favour disulphide formation and further productive folding.     

Multiple interactions of a DNA-binding protein in vivo. II. Effects of host mutations on DNA replication of phage T4 gene 32 mutants.

A quantitative analysis has been made of the kinetics of disulphide bond formation, breakage, and rearrangement which occur during the folding and unfolding of the pancreatic trypsin inhibitor. The results have been used to infer the energetics of the protein conformational transitions which accompany each step.The folding transition is shown to be a co-operative process in which all intermediate states with one or two disulphide bonds are unstable relative to the unfolded, reduced protein and that in the fully folded conformation with three disulphide bonds. The approximate two-state nature of the transition at equilibrium was demonstrated experimentally. The folding transition of the inhibitor which has been determined kinetically is therefore analogous to that observed generally with other globular proteins.     

The single-disulphide intermediates in the refolding of reduced pancreatic trypsin inhibitor

The intermediate species with one disulphide bond in the renaturation of reduced pancreatic trypsin inhibitor have been trapped, isolated, and the Cys residues involved in the disulphide bonds determined. Approximately half the intermediate species had the disulphide bond between Cys-30 and 51, a disulphide bond also present in the native inhibitor. The next most predominant species, representing one-quarter of the total, had a disulphide bond between Cys-5 and 30, and two more minor species involving Cys-30 and 55 and Cys-5 and 51 were detected; these disulphide bonds are not present in the native inhibitor.The nature of the disulphide bonds present are concluded to reflect primarily the conformational forces acting at this stage of folding, which may be primarily interactions between segments with propensities for secondary structure, either helices or β-sheet. The general importance of such interactions in protein folding is discussed.     

Intermediates in the refolding of reduced ribonuclease A.

The intermediates with one, two, three or four disulphide bonds which accumulate during unfolding of native ribonuclease and refolding of the reduced protein have been trapped by rapid alkylation with iodoacetate and separated by ionexchange chromatography. They have been characterized to varying extents by their enzymic activity, electrophoretic mobility through polyacrylamide gels, disulphide bonds between cysteine residues, the environments of the six tyrosine residues as indicated by ultraviolet absorption and fluorescence spectra, interaction with antibodies directed against either the trapped unfolded reduced protein or the native folded protein, and for the disruption by urea of any stable conformation producing a change in molecular shape.Correctly refolded ribonuclease was indistinguishable from the original native protein, but virtually all the intermediates with up to four disulphide bonds formed directly from the reduced protein were enzymically inactive and unfolded by these criteria. Unfolding of native ribonuclease was an all-or-none transition to the fully reduced protein, with no accumulation of disulphide intermediates. The intermediates in refolding are separated from the fully folded state by the highest energy barrier in the folding transition; they may be considered rapidly interconvertible, relatively unstable microstates of the unfolded protein. The measured elements of the final conformation are not acquired during formation of the first three disulphide bonds, but appear simultaneously with formation of the fourth native disulphide bond.These observations with ribonuclease are qualitatively similar to those made previously in greater detail with pancreatic trypsin inhibitor and suggest a possible general pattern for the kinetic process of protein unfolding and refolding.     

Both the stroma and thylakoid lumen of tobacco chloroplasts are competent for the formation of disulphide bonds in recombinant proteins

Plant chloroplasts are promising vehicles for recombinant protein production, but the process of protein folding in these organelles is not well understood in comparison with that in prokaryotic systems, such as Escherichia coli . This is particularly true for disulphide bond formation which is crucial for the biological activity of many therapeutic proteins. We have investigated the capacity of tobacco ( Nicotiana tabacum ) chloroplasts to efficiently form disulphide bonds in proteins by expressing in this plant cell organelle a well-known bacterial enzyme, alkaline phosphatase, whose activity and stability strictly depend on the correct formation of two intramolecular disulphide bonds. Plastid transformants have been generated that express either the mature enzyme, localized in the stroma, or the full-length coding region, including its signal peptide. The latter has the potential to direct the recombinant alkaline phosphatase into the lumen of thylakoids, giving access to this even less well-characterized organellar compartment. We show that the chloroplast stroma supports the formation of an active enzyme, unlike a normal bacterial cytosol. Sorting of alkaline phosphatase to the thylakoid lumen occurs in the plastid transformants translating the full-length coding region, and leads to larger amounts and more active enzyme. These results are compared with those obtained in bacteria. The implications of these findings on protein folding properties and competency of chloroplasts for disulphide bond formation are discussed.     

Intermediates in the refolding of reduced pancreatic trypsin inhibitor

The thiol-disulphide exchange reaction used to renature the reduced pancreatic trypsin inhibitor has been rapidly quenched by acidification or by the addition of iodoacetate or iodoacetamide. The species so trapped at various times during the renaturation of the inhibitor have been analysed by acrylamide gel electrophoresis, which resolved the reduced and renatured inhibitors and several transient species with intermediate electrophoretic mobilities. The intermediates have been tentatively assigned contents of either one or two disulphide bonds by their relative electrophoretic mobilities when free Cys residues were carboxymethylated.The kinetic properties of the species have been determined during renaturation with varying concentrations of several disulphide reagents. The three separable intermediate species with one disulphide bond appear to be in rapid equilibrium via an intramolecular transition and fulfil the kinetic criteria for alternative intermediates on the folding pathway. Several species with two disulphide bonds accumulate under some circumstances. Their kinetic roles have not been fully elucidated, but at least some of them seem to be kinetically trapped species not on the main folding pathway. They appear to be particularly unstable species, one disulphide bond being readily broken.     

Intramolecular disulphide bond arrangements in nonhomologous proteins

The presence and location of intramolecular disulphide bonds are a key determinant of the structure and function of proteins. Intramolecular disulphide bonds in proteins have previously been analyzed under the assumption that there is no clear relationship between disulphide arrangement and disulphide concentration. To investigate this, a set of sequence nonhomologous protein chains containing one or more intramolecular disulphide bonds was extracted from the Protein Data Bank, and the arrangements of the bonds, Protein Data Bank header, and Structural Characterization of Proteins fold were analyzed as a function of intramolecular disulphide bond concentration. Two populations of intramolecular disulphide bond-containing proteins were identified, with a naturally occurring partition at 25 residues per bond. These populations were named intramolecular disulphide bond-rich and -poor. Benefits of partitioning were illustrated by three results: (1) rich chains most frequently contained three disulphides, explaining the plateaux in extant disulphide frequency distributions; (2) a positive relationship between median chain length and the number of disulphides, only seen when the data were partitioned; and (3) the most common bonding pattern for chains with three disulphide bonds was based on the most common for two, only when the data were partitioned. The two populations had different headers, folds, bond arrangements, and chain lengths. Associations between IDSB concentration, IDSB bonding pattern, loop sizes, SCOP fold, and PDB header were also found. From this, we found that intramolecular disulphide bond-rich and -poor proteins follow different bonding rules, and must be considered separately to generate meaningful models of bond formation.     

Analysis of disulphide bond connectivity patterns in protein tertiary structure

The analysis of disulphide bond containing proteins in the Protein Data Bank (PDB) revealed that out of 27,209 protein structures analyzed, 12,832 proteins contain at least one intra-chain disulphide bond and 811 proteins contain at least one inter-chain disulphide bond. The intra-chain disulphide bond containing proteins can be grouped into 256 categories based on the number of disulphide bonds and the disulphide bond connectivity patterns (DBCPs) that were generated according to the position of half-cystine residues along the protein chain. The PDB entries corresponding to these 256 categories represent 509 unique SCOP superfamilies. A simple web-based computational tool is made freely available at the website http://www.ccmb.res.in/bioinfo/dsbcp that allows flexible queries to be made on the database in order to retrieve useful information on the disulphide bond containing proteins in the PDB. The database is useful to identify the different SCOP superfamilies associated with a particular disulphide bond connectivity pattern or vice versa. It is possible to define a query based either on a single field or a combination of the following fields, i.e., PDB code, protein name, SCOP superfamily name, number of disulphide bonds, disulphide bond connectivity pattern and the number of amino acid residues in a protein chain and retrieve information that match the criterion. Thereby, the database may be useful to select suitable protein structural templates in order to model the more distantly related protein homologs/analogs using the comparative modeling methods.     

Reduction of ribonuclease by glutathione at elevated temperatures: the molecular mechanism

1. The mechanism of the reaction between ribonuclease and GSH at elevated temperatures has been studied by using N-(4-dimethylamino-3,5-dinitrophenyl)-maleimide to label the reduced ribonuclease. 2. After incubation for 2hr. at 35 degrees , enzymically active ribonuclease was recovered; at 50.8 degrees half of the initial ribonuclease was recovered as enzymically active ribonuclease and half as reduced labelled ribonuclease; at 55 degrees all of the initial ribonuclease was recovered in the labelled form. 3. It was inferred that the rate-limiting step was the reduction of the first disulphide bond in any one molecule. This was followed by rapid reduction of the other bonds in the same molecule.     

The unswapped chain of bovine seminal ribonuclease: Crystal structure of the free and liganded monomeric derivative

Bovine seminal ribonuclease, a homodimeric enzyme joined covalently by two interchain disulphide bonds, is an equilibrium mixture of two conformational isomers, MxM and M=M. The major form, MxM, whose crystal structure has been previously determined at 1.9 A resolution, presents the swapping of the N-terminal segments (residues 1-15) and composite active sites formed by residues of different chains. The three-dimensional domain swapping does not occur in the M=M form. The different fold of each N-terminal tail is directed by the hinge loop (residue 16-22) connecting the swapping domain to the body of the protein. Reduction and alkylation of interchain disulphide bridges produce a monomeric derivative and a noncovalent swapped dimer, which are both active. The free and nucleotide-bound forms of the monomer have been crystallized at an alkaline pH and refined at 1.45 and 1.65 A resolution, respectively. In both cases, the N-terminal fragment is folded on the main body of the protein to produce an intact active site and a chain architecture very similar to that of bovine pancreatic ribonuclease. In this new fold of the seminal chain, the hinge loop is disordered. Despite the difference between the tertiary structure of the monomer and that of the chains in the MxM form, the active sites of the two enzymes are virtually indistinguishable. Furthermore, the structure of the liganded enzyme represents the first example of a ribonuclease complex studied at an alkaline pH and provides new information on the binding of a nucleotide when the catalytic histidines are deprotonated.     

Analycys: a database for conservation and conformation of disulphide bonds in homologous protein domains

Disulphide bonds in proteins are known to play diverse roles ranging from folding to structure to function. Thorough knowledge of the conservation status and structural state of the disulphide bonds will help in understanding of the differences in homologous proteins. Here we present a database for the analysis of conservation and conformation of disulphide bonds in SCOP structural families. This database has a wide range of applications including mapping of disulphide bond mutation patterns, identification of disulphide bonds important for folding and stabilization, modeling of protein tertiary structures and in protein engineering. The database can be accessed at: http://bioinformatics.univ-reunion.fr/analycys/.     

Overexpression of the rhodanese PspE, a single cysteine-containing protein, restores disulphide bond formation to an Escherichia coli strain lacking DsbA

Escherichia coli uses the DsbA/DsbB system for introducing disulphide bonds into proteins in the cell envelope. Deleting either dsbA or dsbB or both reduces disulphide bond formation but does not entirely eliminate it. Whether such background disulphide bond forming activity is enzyme-catalysed is not known. To identify possible cellular factors that might contribute to the background activity, we studied the effects of overexpressing endogenous proteins on disulphide bond formation in the periplasm. We find that overexpressing PspE, a periplasmic rhodanese, partially restores substantial disulphide bond formation to a dsbA strain. This activity depends on DsbC, the bacterial disulphide bond isomerase, but not on DsbB. We show that overexpressed PspE is oxidized to the sulphenic acid form and reacts with substrate proteins to form mixed disulphide adducts. DsbC either prevents the formation of these mixed disulphides or resolves these adducts subsequently. In the process, DsbC itself gets oxidized and proceeds to catalyse disulphide bond formation. Although this PspE/DsbC system is not responsible for the background disulphide bond forming activity, we suggest that it might be utilized in other organisms lacking the DsbA/DsbB system.     

Renaturation of recombinant proteins produced as inclusion bodies

Expression of recombinant proteins in Escherichia coli often results in the formation of insoluble inclusion bodies. Within the last few years specific methods and strategies have been developed to prepare active proteins from these inclusion bodies. These methods include (i) isolation of inclusion bodies after disintegration of cells by mechanical forces and purification by washing with detergent solutions or low concentrations of denaturant, (ii) solubilization of inclusion bodies with high concentrations of urea or guanidine-hydrochloride in combination with reducing reagents, and (iii) renaturation of the proteins including formation of native disulphide bonds. Renatured and native disulphide bond formation are accomplished by (a) either air oxidation, (b) glutathione reoxidation starting from reduced material, or (c) disulphide interchange starting from mixed disulphides containing peptides. The final yield of renatured proteins can be increased by adding low concentrations of denaturant during renaturation.     

SP-40,40, a protein involved in the control of the complement pathway, possesses a unique array of disulphide bridges.

SP-40,40 is a two-chain serum protein which acts in vitro as a potent inhibitor of the assembly of the membrane attack complex of human complement. It contains 10 cysteine residues, the numbers and locations of which are conserved in several mammalian species. Evidence is presented that all the cysteine residues are involved in interchain (alpha-beta) disulphide bonds. There are no free cysteine residues. The disulphide bond motif established in this study for SP-40,40 is unique and bears no obvious homology to those complement components whose disulphide bonds have been assigned, nor is there any homology apparent between SP-40,40 and other multi-chain proteins containing disulphide bonds.     

Conformational restrictions on the pathway of folding and unfolding of the pancreatic trypsin inhibitor

The kinetic roles of the partially folded, intermediate protein species with two disulphide bonds in folding and unfolding of the pancreatic trypsin inhibitor have been investigated further. Formation of a second disulphide bond between Cys5 and Cys55 during refolding of the reduced inhibitor, which would yield the species with the 30–51 and 5–55 disulphide bonds and, possibly, the native-like conformation of the protein, is not significant. Instead, three other second disulphide bonds (5–14, 5–38 and 14–38) are formed approximately 10⁵ times more readily, but each of these two-disulphide species then rearranges intramolecularly to the native-like, two-disulphide intermediate. Therefore, the reduced protein does not simply form sequentially the three disulphide bonds of the native state. Unfolding of the native state takes place by the reverse of this process.The kinetic importance for folding and unfolding of this transition between two-disulphide intermediates under the conditions used here was illustrated experimentally by a modified form of the inhibitor in which the thiols of Cys14 and Cys38 were blocked irreversibly. In the folded conformation, this modified protein is more stable to unfolding than normal, but after unfolding cannot readily regain the native-like conformation, because Cys14 or Cys38 are required to be involved in disulphide bonds during the interconversion of the two-disulphide intermediates.Some conception of the conformational transitions that take place at each stage of the folding transition may be inferred from the relative propensities of the six cysteine residues to make or rearrange disulphide bonds. It is concluded that the inhibitor probably does not refold by sequential adoption of the native conformation by the unfolded polypeptide chain. Instead, it appears that essentially all elements of the native conformation are attained simultaneously in the final stage of folding, within an unstable and flexible, yet relatively compact, form of the entire polypeptide chain produced by weak interactions between groups distant in the primary structure.     

Formation of disulphide bonds during secretion of proteins through the periplasmic-independent type I pathway

In this work, we have investigated whether the bacterial type I secretion pathway, which does not have a periplasmic intermediate of the secreted protein, allows the formation of disulphide bridges. To this end, the formation of disulphide bonds has been studied in an antibody single-chain Fv (scFv) fragment secreted by the Escherichia coli haemolysin (Hly) transporter (a paradigm of type I secretion). The scFv antibody fragment was used as a disulphide bond and protein-folding reporter, as it contains two disulphide bridges that are required for its correct folding (i.e. to preserve its antigen-binding activity). We show that an scFv-HlyA hybrid secreted by Hly type I transporter (TolC, HlyB, HlyD) is accumulated in the extracellular medium with the disulphide bonds correctly formed. Neither periplasmic and inner membrane-bound Dsb enzymes (e.g. DsbC, DsbG, DsbB and DsbD) nor cytoplasmic thioredoxins (TrxA and TrxC) were required for scFv-HlyA oxidation. However, a mutation of the thioredoxin reductase gene (trxB), which leads to the cytoplasmic accumulation of the oxidized forms of thioredoxins, had a specific inhibitory effect on the Hly-dependent secretion of disulphide-containing proteins. These data suggest that premature cytoplasmic oxidation of the substrate may interfere with the secretion process. Taken together, these results indicate not only that the type I system tolerates secretion of disulphide-containing proteins, but also that disulphide bonds are specifically formed during the passage of the polypeptide through the export conduit.     

Facilitated release of substrate protein from prefoldin by chaperonin

Prefoldin is a chaperone that captures a protein-folding intermediate and transfers it to the group II chaperonin for correct folding. However, kinetics of interactions between prefoldin and substrate proteins have not been investigated. In this study, dissociation constants and dissociation rate constants of unfolded proteins with prefoldin were firstly measured using fluorescence microscopy. Our results suggest that binding and release of prefoldin from hyperthermophilic archaea with substrate proteins were in a dynamic equilibrium. Interestingly, the release of substrate proteins from prefoldin was facilitated when chaperonin was present, supporting a handoff mechanism of substrate proteins from prefoldin to the chaperonin.     

The position of the disulfide bonds in human plasma alpha 2 HS-glycoprotein and the repeating double disulfide bonds in the domain structure

The positions of the inter- and intra-chain disulfide bonds of human plasma alpha 2 HS-glycoprotein were determined. alpha 2 HS-glycoprotein was digested with acid proteinase and then with thermolysin. The disulfide bonds containing peptides were separated by reversed-phase HPLC and detected by SBD-F (7-fluorobenzo-2-oxa-1,3-diasole-4-sulfonic acid ammonium salt) method. One inter-disulfide bond containing peptide and five intra-disulfide bond containing peptides (A-chain) were purified and identified as Cys-18 (B-chain)--Cys-14 (A-chain), Cys-71--Cys-82, Cys-96--Cys-114, Cys-128--Cys-131, Cys-190--Cys-201 and Cys-212--Cys-229, respectively. The location of the intra-disulfide bonds revealed that the A-chain of alpha 2 HS-glycoprotein is composed of three domains. Two domains were shown to possess intramolecular homology judging from the total chain length of the domains, size of the loops formed by the S--S bonds, the location of two disulfide loops near the C-terminal end of domains A and B, the distance between two S--S bonds of each domain, the amino acid sequence homology between these two domains (22.6%), number of amino acid residues between the second S--S loops and the end of domains A and B, and the positions of the ordered structures.     

Interaction of pyridoxal-5-phosphate with human serum albumin and pancreatic ribonuclease

Pyridoxal-5-phosphate (in a lesser degree, pyridoxal) interacts with both non-protonated and protonated exposed epsilon-amino groups of lysine residues and with alpha-amino groups in human serum albumin and pancreatic ribonuclease A. The reaction of Schiff base formation proceeds within a wide pH range--from 3.0 to 12.0. At a great pyridoxal-5-phosphate excess in ribonuclease A in neutral or slightly acidic aqueous media all the ten epsilon-amino groups of lysine residues and the alpha-amino groups of Lys-1 become modified. The formation of aldimine bonds of pyridoxal-5-phosphate with protonated amino groups in acidic media is determined by ionization of its phenol hydroxyl and phosphate residues. Acetaldehyde, propionic aldehyde and pyridine aldehyde interact only with non-protonated amino groups of the proteins. The equilibrium constants of pyridoxal-5-phosphate and other aldehydes binding to proteins and amino acids were determined. The rate constants of Schiff base formation for pyridoxal-5-phosphates with some amino acids and primary sites of proteins for direct and reverse reactions were calculated.