Thermally induced denaturation and aggregation of BLG-A: effect of the Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> metal ions

There is growing evidence that metal ions can accelerate the aggregation process of several proteins. This process, associated with several neuro-degenerative diseases, has been reported also for non-pathological proteins. In the present work, the effects of copper and zinc ions on the denaturation and aggregation processes of β-lactoglobulin A (BLG-A) are investigated by differential scanning calorimetry (DSC), fluorescence, electron paramagnetic resonance (EPR) and optical density. The DSC profiles reveal that the thermal behaviour of BLG-A is a complex process, strongly dependent on the protein concentration. For concentrations ≤0.13 mM, the thermogram shows an endothermic peak at 84.3°C, corresponding to denaturation; for concentrations >0.13 mM an exothermic peak also appears, above 90°C, related to the aggregation of the denaturated BLG-A molecules. The thioflavin T fluorescence indicates that the thermally induced aggregates show fibrillar features. The presence of either equimolar Cu²⁺ or Zn²⁺ ions in the protein solution has different effects. In particular, copper binds to the protein in the native state, as evidenced by EPR experiments, and destabilizes BLG-A by decreasing the denaturation temperature by about 10°C, whereas zinc ions probably perturb the partially denaturated state of the protein. The kinetics of BLG-A aggregation shows that both metal ions abolish the lag phase before the aggregation starts. Moreover, the rate of the process is 4.6-fold higher in the presence of copper, whereas the effect of zinc is negligible. The increase of the aggregation rate, induced by copper, may be due to a site-specific binding of the metal ion on the protein.     

A new benzimidazole‐based selective and sensitive ‘on–off’ fluorescence chemosensor for Cu2+ ions and application in cellular bioimaging

Two new twinborn benzimidazole derivates ( L and A ), which bonded pyridine via the ester space on the opposite and adjacent positions of the benzene ring of benzimidazole respectively, were designed and synthesized. Compound L displayed fluorescence quenching response only towards copper(II) ions (Cu²⁺) in acetonitrile solution with high selectivity and sensitivity. However, compound A presented ‘on–off’ fluorescence response towards a wide range of metal ions to different degrees and did not have selectivity. Furthermore, compound L formed a 1:1 complex with Cu²⁺ and the binding constant between sensor L and Cu²⁺ was high at 6.02 × 10⁴ M^?1. Job's plot, mass spectra, IR spectra, ¹H‐NMR titration and density functional theory (DFT) calculations demonstrated the formation of a 1:1 complex between L and Cu²⁺. Chemosensor L displayed a low limit of detection (3.05 × 10^?6 M) and fast response time (15 s) to Cu²⁺. The Stern–Volmer analysis illustrated that the fluorescence quenching agreed with the static quenching mode. In addition, the obvious difference of L within HepG2 cells in the presence and absence of Cu²⁺ indicated L had the recognition capability for Cu²⁺ in living cells.     

Fluorescent probe for detection of Cu2+ using core‐shell CdTe/ZnS quantum dots

Core‐shell CdTe/ZnS quantum dots capped with 3‐mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu²⁺ has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu²⁺ in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu²⁺ in the range from 2.5 × 10^–9 M to 17.5 × 10^–7 M with the limit of 1.5 × 10^–9 M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30–102.75%. Copyright © 2015 John Wiley & Sons, Ltd.     

A new Schiff base as a turn‐off fluorescent sensor for Cu2+ and its photophysical properties

A new Schiff base receptor 1 was synthesized and its photophysical properties were investigated by absorption, emission and excitation techniques. Furthermore, its chromogenic and fluorogenic sensing abilities towards various metal ions were examined. Receptor 1 selectively detects Cu²⁺ ion through fluorescence quenching and detection was not inhibited in the presence of other metal ions. From fluorescence titration, the limit of detection of receptor 1 as a fluorescent ‘turn‐off’ sensor for the analysis of Cu²⁺ was estimated to be 0.35 μM.     

From Ca2+ in muscle contraction to IP3 receptor/Ca2+ signaling In memory of Setsuro Ebashi

The red fluorescent protein, DsRed, and a few of its mutants have been shown to bind copper ions resulting in quenching of its fluorescence. The response to Cu²⁺ is rapid, selective, and reversible upon addition of a copper chelator. DsRed has been employed as an in vitro probe for Cu²⁺ determination by us and other groups. It is also envisioned that DsRed can serve as an intracellular genetically encoded indicator of Cu²⁺ concentration, and can be targeted to desired subcellular locations for Cu²⁺ determination. However, no information has been reported yet regarding the mechanism of the fluorescence quenching of DsRed in the presence of Cu²⁺. In this work, we have performed spectroscopic investigations to determine the mechanism of quenching of DsRed fluorescence in the presence of Cu²⁺. We have studied the effect of Cu²⁺ addition on two representative mutants of DsRed, specifically, DsRed-Monomer and DsRed-Express. Both proteins bind Cu²⁺ with micromolar affinities. Stern-Volmer plots generated at different temperatures indicate a static quenching process in the case of both proteins in the presence of Cu²⁺. This mechanism was further studied using absorption spectroscopy. Stern-Volmer constants and quenching rate constants support the observation of static quenching in DsRed in the presence of Cu²⁺. Circular dichroism (CD)-spectroscopic studies revealed no effect of Cu²⁺-binding on the secondary structure or conformation of the protein. The effect of pH changes on the quenching of DsRed fluorescence in the presence of copper resulted in pK_a values indicative of histidine and cysteine residue involvement in Cu²⁺-binding.     

A new principle for activity measurement of ADP or ATP dependent enzymes: fluorescence quenching of epsilon-ADP and epsilon-ATP by divalent metal ions.

The divalent metal ions Cu²⁺, Co²⁺, Mn²⁺, and Zn²⁺ form complexes with the fluorescent etheno analogs of the adenine nucleotides. The fluorescence intensity is thereby diminished. The binding strength of the metals to etheno-adenosine triphosphate is higher than to etheno-adenosine di- and monophosphate. The quenching effect of the divalent metal ions can be exploited as a simple routine activity measurement for various kinases and phosphohydrolases.     

Naked eye sensing of toxic metal ions in aqueous medium using thiophene‐based ligands and its application in living cells

Thiophene‐based diimine (R1) and monoimine (R2) were synthesized in a single step, and their cation binding affinity was tested using colorimetric and UV–vis spectral studies. R1 selectively shows a colorimetric turn‐on response for Pb²⁺, Hg²⁺ ions and colorimetric turn‐off with Sn²⁺ ions, and R2 shows visual response for Cu²⁺ and Hg²⁺ over other examined metal ions in aqueous medium. R1 forms 1:1 complex with Pb²⁺, Hg²⁺, and Sn²⁺ and exhibits fluorescence quenching, whereas R2 shows 2:1 complex with Hg²⁺, Cu²⁺ and shows fluorescence enhancement. The structural and electronic properties of the sensors and their metal complexes were also investigated using Density Functional Theory calculations. R2 was also successfully demonstrated as a fluorescent probe for detecting Cu²⁺ ions in living cells. Copyright © 2014 John Wiley & Sons, Ltd.     

SDS-capped 1-pyrenecarboxaldehyde nanoprobe for selective detection of Cu2+ ion from water samples: Spectroscopic approach

Sodium dodecyl sulfate (SDS)-capped 1-pyrenecarboxaldehyde nanoparticles (PyalNPs) were prepared using a reprecipitation method in an aqueous medium and exhibited red-shifted aggregation-induced enhanced emission (AIEE). The dynamic light scattering (DLS) examination showed narrower particle size distribution with an average particle size of 41 nm, whereas −34.5 mV zeta potential value indicate the negative surface charge and good stability of nanoparticles (NPs) in an aqueous medium. The AIEE was seen at λ_max = 473 nm in a fluorescence spectrum of a PyalNP suspension. In the presence of Cu²⁺ ions, the fluorescence of PyalNPs quenches very significantly, even in the presence of other metal ions like Ba²⁺, Ca²⁺, Cd²⁺, Co²⁺, Al³⁺, Fe²⁺, Hg²⁺, Ni²⁺ and Mg²⁺. The changes in the fluorescence lifetime of PyalNPs in the presence of Cu²⁺ ions suggested that the type of quenching was dynamic. The fluorescence quenching data for the NPs suspension fitted well into a typical Stern–Volmer relationship in the concentration range 1.0–25 μg/ml of Cu²⁺ ions. The estimated value of the correlation coefficient R² = 0.9877 was close to 1 and showed the linear relationship between quenching data and Cu²⁺ ion concentration. The limit of detection (LOD) was found to be 0.94 ng/ml and is far below the tolerable intake limit value of 1.3 μg/ml accepted by the World Health Organization for Cu²⁺ ions in drinking water. The fluorescence quenching approach for a SDS-capped Pyal nanosuspension for copper ion quantification is of high specificity and coexisting ions were found to interfere very negligibly. The developed method was successfully applied for the estimation of copper ions in river water samples.     

A highly selective fluorescence and absorption sensor for rapid recognition and detection of Cu2+ ions in aqueous solution and film

A fluorescence and absorption chemosensor (SAAT) based on 5-(hydroxymethyl)-salicylaldehyde (SA) and o-aminothiophenol (AT) was designed and synthesized. SAAT in DMSO–HEPES (20.0 mM, v/v, 1:99, pH = 7.0) solution shows a highly selective and sensitive absorption and an ‘on–off’ fluorescence response to Cu²⁺ ions in aqueous solutions over all other competitive metal ions including Na⁺, Ag⁺, Ba²⁺, Ca²⁺, Cd²⁺, Mg²⁺, Zn²⁺, Cr³⁺, Al³⁺, Hg²⁺, K⁺, Mn²⁺, Ni²⁺, Sr²⁺, Tb³⁺ and Co²⁺. SAAT exhibits ratiometric absorption sensing ability for Cu²⁺ ions. Importantly, SAAT also can sense Cu²⁺ ions using fluorescence quenching, the fluorescence intensity of SAAT showed a good linear relationship with Cu²⁺ concentration, and the detection limit of Cu²⁺ was 0.34 μM. The results of Job's plot, Benesi–Hildebrand plot, mass spectra, and density functional theory calculations confirmed that the selective absorption and fluorescence response were attributed to the formation of a 1:1 complex between SAAT and Cu²⁺. SAAT in test film could identify Cu²⁺ in water samples using the intuitive fluorescence colour change under a UV lamp. SAAT has great application value as a selective and sensitive chemosensor to discriminate and detect Cu²⁺ ions.     

Evidence for the Cd<Superscript>2+</Superscript> Activation of the Aryl Sulfatase from <Emphasis Type="Italic">Helix pomatia</Emphasis>

Often used to remove sulfate groups from carbohydrates, the regulatory properties of the aryl sulfatase from Helix pomatia remain little characterized. As many hydrolytic enzymes utilize exogenous metal ions in catalysis, the effect of various divalent metal ions on the sulfatase was investigated. Evidence for metal ion activation was collected, with Cd²⁺ being notable for effective activation. The enzyme was inhibited by Cu²⁺. The response of other common hydrolases to divalent metal ions was characterized. Activation by Cd²⁺ was not observed for chymotrypsin, rabbit liver esterase, or β-galactosidase. Instead, Cd was found to inhibit both the esterase and the galactosidase. Inhibition by Cu²⁺ and Zn²⁺ was also observed for some of these hydrolases.     

Types of interaction of meso‐tetraphenylporphyrin with alkali and alkaline‐earth metal ions

The cavity in a porphyrin can accommodate metal ions through electron donor–acceptor (EDA) interaction in acetonitrile media without any specially designed fabrication with the porphyrin subunit. Alkali metal ion forms a complex with meso‐tetraphenylporphyrin (TP) in 2:1 stoichiometry, while the bivalent Mg²⁺ ion follows a 1:1 stoichiometry. A fluorescence interaction study indicated that TP can behave like a chemosensor for these ions present in the blood electrolytes. Specifically, for the alkali metal ions intensity‐based sensing was observed, due to inhibition of photoinduced electron transfer (PET), entailing enhancement of fluorescence intensity, and for the alkaline‐earth Mg²⁺ a mixed quenching was observed. Na⁺ and K⁺ ions can be differentiated depending upon the extent of fluorescence enhancement. Copyright © 2011 John Wiley & Sons, Ltd.     

A rhodamine-based "turn-on" fluorescent chemodosimeter for Cu2+ and its application in living cell imaging

A new fluorescent probe 1, N-(Rhodamine-6G)lactam-hydrazinecarbothioamide, was synthesized as a fluorescent and colorimetric chemodosimeter in aqueous solution for Cu²⁺. Following Cu²⁺-promoted ring opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu²⁺; this suggests that chemodosimeter 1 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu²⁺. Importantly, 1 can selectively recognize Cu²⁺ in aqueous media in the presence of other trace metal ions in organisms, abundant cellular cations and the prevalent toxic metal ions in the environment with high sensitivity (detection limit < 3 ppb) and a rapid response time (< 2 min). In addition, the biological imaging study has demonstrated that 1 can detect Cu²⁺ in the living cells.     

Effects of Ketamine on the Balance of Ions Ca<Superscript>2+</Superscript>, Mg<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> in the Ischemia-reperfusion Affected Spinal Cord Tissues in Rabbits

To test the effects of ketamine on metal ion balance in the spinal cord tissues after ischemic reperfusion (I/R), 24 white adult Japanese rabbits were randomly assigned to sham operation group, I/R group or ketamine-treated I/R group. Spinal cord injuries in I/R group and ketamine-treated I/R group were induced by aortic occlusions. Rabbits in ketamine-treated I/R group were intravenously infused 10 mg/kg ketamine twice: once at 10 min before aortic clamping and once at the onset of reperfusion. Post-operative neurological functions and concentrations of ions Ca²⁺, Mg²⁺, Cu²⁺ and Zn²⁺ in the spinal cord were assessed. Compared with the sham operation group, rabbits in the I/R group showed significantly worsened neurological functions as scored with the modified Tarlov criteria and altered concentrations of ions Ca²⁺, Mg²⁺, Cu²⁺ and Zn²⁺. These unfavorable changes were significantly reversed in the ketamine-treated I/R group, suggesting that the potent protective effects of ketamine against the I/R-induced spinal cord injuries may be due to its ability to maintain ion balance in the I/R affected tissues.     

A N‐(2‐hydroxyethyl)piperazine dangled 2,5‐diphenyl‐1,3,4‐oxadiazole‐based fluorescent sensor for selective relay recognition of Cu2+ and sulfide in water

A new 2,5‐diphenyl‐1,3,4‐oxadiazole‐based derivative (L) was synthesized and applied as a highly selective and sensitive fluorescent sensor for relay recognition of Cu²⁺ and S^2? in water (Tris–HCl 10 mM, pH = 7.0) solution. L exhibits an excellent selectivity to Cu²⁺ over other examined metal ions with a prominent fluorescence ‘turn‐off’ at 392 nm. L interacts with Cu²⁺ through a 1:2 binding stoichiometry with a detection limit of 4.8 × 10^–7 M. The on‐site formed L–2Cu²⁺ complex exhibits excellent selectivity to S^2? with a fluorescence ‘off–on’ response via a Cu²⁺ displacement approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Multifunctional organic–inorganic composite luminescent nanospheres

A simple general strategy was successfully developed for the preparation of magnetic–luminescent multifunctional nanocomposites by incorporating fluorescent (pyrene) and magnetic (Fe₃O₄) components simultaneously into a poly(styrene‐co‐methacrylic acid) [poly(St‐co‐MAA)] copolymer matrix. The nanospheres so prepared were characterized using scanning electron microscopy (SEM), powder X‐ray diffraction (XRD) and Fourier transform infrared (FTIR) analysis. The prepared magnetic–fluorescent inorganic–organic nanocomposites have excellent magnetic and photoluminescent properties. They can be used in magnetic separation of trace amounts of sample, fluorescence detection and imaging applications, including magnetic resonance imaging (MRI) and fluorescence imaging. The fluorescence quenching of the nanospheres in the presence of different amounts of Cu²⁺ ions was also investigated. Under optimal experimental conditions, the relative fluorescence intensity of the composite nanosphere colloidal solution is proportional to the concentration of Cu²⁺ ions, which indicates that these multifunctional nanocomposites can be used for the magnetic separation and fluorescence detection of Cu²⁺ ions. Copyright © 2011 John Wiley & Sons, Ltd.     

Luminescent sensor for Cd2+, Hg2+ and Ag+ in water based on a sulphur‐containing receptor: quantitative binding–softness relationship

A water‐soluble, high‐output fluorescent sensor, based on a lumazine ligand with a thiophene substituent for Cd²⁺, Hg²⁺ and Ag⁺ metal ions, is reported. The sensor displays fluorescence enhancement upon Cd²⁺ binding (log  β = 2.79 ± 0.08) and fluorescence quenching by chelating with Ag⁺ and Hg²⁺ (log β = 4.31 ± 0.15 and 5.42 ± 0.1, respectively). The mechanism of quenching is static and occurs by formation of a ground‐state non‐fluorescent complex followed by rapid intersystem crossing. The value of the Stern–Volmer quenching rate constant (k_q) by Ag⁺ ions is close to 6.71 × 10¹² mol/L/s at 298 K. The thermodynamic parameters (ΔG, ΔH and ΔS) were also evaluated and indicated that the complexation process is spontaneous, exothermic and entropically favourable. The quantitative linear relationship between the softness values of Klopman (σ_K) or Ahrland (σ_A) and the experimental binding constants (β) being in the order of Hg²⁺ > Ag⁺ > Cd²⁺ suggests that soft–soft interactions are the key for the observed sensitivity and selectivity in the presence of other metal ions, such as: Pb²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Co²⁺, Zn²⁺ and Mg²⁺ ions. Copyright © 2008 John Wiley & Sons, Ltd.     

Application of 2,4,5-tris(2-pyridyl)imidazole as ‘turn-off’ fluorescence sensor for Cu(II) and Hg(II) ions and in vitro cell imaging

The 2,4,5-tris(2-pyridyl)imidazole ( L ) molecule has been evaluated as a probe for dual sensing of Hg²⁺ and Cu²⁺ ions in EtOH/HEPES buffer medium (5 mM, pH = 7.34, 1:1, v/v). Probe L shows a good sensitive and selective turn-off response in the presence of both Hg²⁺ and Cu²⁺ ions, which is comprehensible under long UV light. The probe can detect Cu²⁺ ion in the pH range 3–11 and Hg²⁺ ion in pH 6–8. The limit of detection for Cu²⁺ (0.77 μM) is well under the allowable limit prescribed by the United States Environmental Protection Agency. Two metal (Cu²⁺/Hg²⁺) ions are needed per L for complete fluorescence quenching. The probe shows marked reversibility on treatment with Na₂EDTA, making the protocol more economical for practical purposes. Paper strip coated with the L solution of EtOH can detect the presence of Cu²⁺ and Hg²⁺ ions in the sample using visible quenching of the fluorescence intensity. Density functional theory–time-dependent density functional theory (DFT–TDDFT) calculations support experimental observations, and d-orbitals of Cu²⁺/Hg²⁺ provide a nonradiative decay pathway. Cell imaging study using HDF and MDA-MB-231 cells also supported the viability of L in detecting Cu²⁺ and Hg²⁺ ions in living cells.     

A selective and sensitive fluorescent sensor for cysteine detection based on bi‐8‐carboxamidoquinoline derivative and Cu2+ complex

In this paper, a novel fluorescent sensor 1 for selective and sensitive detection of cysteine was developed based on a complex between bi‐8‐carboxamidoquinoline derivative ligand ( L ) and Cu²⁺. The interaction of Cu²⁺ with the ligand causes a dramatic fluorescence quenching most likely due to its high affinity towards Cu²⁺ and a ligand–metal charge transfer (LMCT) process. The in situ generated L–Cu ² complex was utilized as a chemosensing ensemble for cysteine. In the presence of cysteine, the fluorophore, L , was released from L–Cu ² complex because of the strong affinity of cysteine to Cu²⁺ via the Cu–S bond, leading to the fluorescence recovery of the ligand. The proposed displacement mechanism was confirmed by the results of mass spectrometry (MS) study. Under optimized conditions, the recovered fluorescence intensity is linear with cysteine concentrations in the range 1 × 10^?6 mol/l to 8 × 10^?6 mol/l. The detection limit for cysteine is 1.92 × 10^?7 mol/l. Furthermore, the established method showed a highly sensitive and selective response to cysteine among the 20 fundamental α‐amino acids used as the building blocks of proteins, after Ni²⁺ was used as a masking agent to eliminate the interference of His. The proposed sensor is applicable in monitoring cysteine in practical samples with good recovery rate.     

Evaluation of the influence of intermolecular electron-nucleus couplings and intrinsic metal binding sites on the measurement of <Superscript>15</Superscript>N longitudinal paramagnetic relaxation enhancements in proteins by solid-state NMR

Magic-angle spinning solid-state NMR measurements of ¹⁵N longitudinal paramagnetic relaxation enhancements (PREs) in ¹³C,¹⁵N-labeled proteins modified with Cu²⁺-chelating tags can yield multiple long-range electron-nucleus distance restraints up to ~20 Å (Nadaud et al. in J Am Chem Soc 131:8108–8120, 2009). Using the EDTA-Cu²⁺ K28C mutant of B1 immunoglobulin binding domain of protein G (GB1) as a model, we investigate the effects on such measurements of intermolecular electron-nucleus couplings and intrinsic metal binding sites, both of which may potentially complicate the interpretation of PRE data in terms of the intramolecular protein fold. To quantitatively assess the influence of intermolecular ¹⁵N-Cu²⁺ interactions we have determined a nearly complete set of longitudinal ¹⁵N PREs for a series of microcrystalline samples containing ~10, 15 and 25 mol percent of the ¹³C,¹⁵N-labeled EDTA-Cu²⁺-tagged protein diluted in a matrix of diamagnetic natural abundance GB1. The residual intermolecular interactions were found to be minor on the whole and account for only a fraction of the relatively small but systematic deviations observed between the experimental ¹⁵N PREs and corresponding values calculated using protein structural models for residues furthest removed from the EDTA-Cu²⁺ tag. This suggests that these deviations are also caused in part by other factors not related to the protein structure, such as the presence in the protein of intrinsic secondary sites capable of binding Cu²⁺ ions. To probe this issue we performed a Cu²⁺ titration study for K28C-EDTA GB1 monitored by 2D ¹⁵N-¹H solution-state NMR, which revealed that while for Cu²⁺:protein molar ratios of ≤ 1.0 Cu²⁺ binds primarily to the high-affinity EDTA tag, as anticipated, at even slightly super-stoichiometric ratios the Cu²⁺ ions can also associate with side-chains of aspartate and glutamate residues. This in turn is expected to lead to enhanced PREs for residues located in the vicinity of the secondary Cu²⁺ binding sites, and indeed many of these residues were ones found to display the elevated longitudinal ¹⁵N PREs in the solid phase.     

Study of fluorescence quenching of mercaptosuccinic acid‐capped CdS quantum dots in the presence of some heavy metal ions and its application to Hg(II) ion determination

In this study, CdS quantum dots (QDs) capped with mercaptosuccinic acid (MSA) were prepared in one step. The size, shape, component and spectral properties of MSA‐capped CdS QDs were characterized by transmission electron microscopy (TEM), photoluminescence (PL) and infrared (IR) spectrometry. The results showed that the prepared QDs with an average diameter of 6 nm have favorable fluorescence, which is greatly influenced by the pH of the environment. The interaction of some heavy metal ions including Ag⁺, Hg²⁺, Cu²⁺, Ni²⁺ and Co²⁺ with MSA‐capped CdS QDs was investigated in different buffering pH media. Based on the fluorescence quenching of the QDs in the presence of each of the metal ions, the feasibility of their determinations was examined according to the Stern–Volmer equation. The investigations showed that Hg(II) ions can be determined in the presence of many co‐existing metal ions at a buffering pH of 5. This method was satisfactorily applied to the measurement of Hg(II) ions in some environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.