The co-ordination of chitosan and chitin synthesis in Mucor rouxii

Chitin synthetase preparations from cell walls and chitosomes of the fungus Mucor rouxii were tested for their ability to synthesize chitosan when incubated with uridine diphosphate N-acetyl-D-glucosamine in the presence of chitin deacetylase. The most effective chitin synthetase preparation was one dissociated from cell walls with digitonin. The rate of chitosan synthesis by the wall-dissociated chitin synthetase was about three times that of an equivalent amount of cell walls. The chitosan-synthesizing ability of chitosomes was relatively low, but was more than tripled by treatment with digitonin. Presumably, digitonin improves chitosan yields of dissociating chitin synthetase. The dissociated enzyme would produce dispersed chitin chains that could be attacked by chitin deacetylase before they have time to crystallize into microfibrils. The regulation of chitin and chitosan syntheses in vivo may be determined by the organization of chitin synthetase molecules at the cell surface. Those molecules that remain organized as a complex, similar if not identical to that found in chitosomes, would produce mainly chitin. Chitosan would be preferentially produced by chitin synthetase molecules which are dispersed upon reaching the cell surface.     

Insect chitin synthases: a review

Chitin is the most widespread amino polysaccharide in nature. The annual global amount of chitin is believed to be only one order of magnitude less than that of cellulose. It is a linear polymer composed of N-acetylglucosamines that are joined in a reaction catalyzed by the membrane-integral enzyme chitin synthase, a member of the family 2 of glycosyltransferases. The polymerization requires UDP–N-acetylglucosamines as a substrate and divalent cations as co-factors. Chitin formation can be divided into three distinct steps. In the first step, the enzymes‘ catalytic domain facing the cytoplasmic site forms the polymer. The second step involves the translocation of the nascent polymer across the membrane and its release into the extracellular space. The third step completes the process as single polymers spontaneously assemble to form crystalline microfibrils. In subsequent reactions the microfibrils combine with other sugars, proteins, glycoproteins and proteoglycans to form fungal septa and cell walls as well as arthropod cuticles and peritrophic matrices, notably in crustaceans and insects. In spite of the good effort by a hardy few, our present knowledge of the structure, topology and catalytic mechanism of chitin synthases is rather limited. Gaps remain in understanding chitin synthase biosynthesis, enzyme trafficking, regulation of enzyme activity, translocation of chitin chains across cell membranes, fibrillogenesis and the interaction of microfibrils with other components of the extracellular matrix. However, cumulating genomic data on chitin synthase genes and new experimental approaches allow increasingly clearer views of chitin synthase function and its regulation, and consequently chitin biosynthesis. In the present review, I will summarize recent advances in elucidating the structure, regulation and function of insect chitin synthases as they relate to what is known about fungal chitin synthases and other glycosyltransferases.     

Properties of chitin synthase in homogenates from Chironomus cells

Homogenates of Chironomus cells synthesize chitin as effectively as intact cells. Chitin is produced in a dose-dependent manner, when GlcN, GlcNAc, or UDP-GlcNAc is used as precursor. Due to the lability of UDP-GlcNAc incorporation of this substrate is underestimated. No allosteric effect is observed when GlcN or GlcNAc is used as a substrate. Chitin synthesis is stimulated by Mg²⁺ and inhibited by uridine monophosphate (UMP), uridine diphosphate (UDP), and uridine triphosphate (UTP). The apparent temperature optimum is 30°C, the apparent pH optimum is 5.5–6. Addition of the chitinase inhibitor allosamidin does not enhance chitin synthesis significantly. The time course of chitin formation reveals a lag period of about 12 h, which can be overcome by trypsin treatment. Addition of protease inhibitors prevents chitin synthesis.     

The dynamics of exoskeletal-epidermal structure during molt in juvenile lobster by electron microscopy and electron spectroscopic imaging

The exoskeletal-epidermal complex of juvenile lobsters at various stages throughout the molt cycle was examined by conventional electron microscopy, freeze-etch replicas, and electron spectroscopic imaging. This latter technique which enables the direct localization of atomic elements superimposed over morphological fine structure has been applied to this tissue complex to determine the spatial distributions and interrelationships of calcium, phosphorus, and sulphur. Chitin microfibril assembly is visualized in thin sections as occurring at the surface of apical membrane plaques which in freeze-etch replicas invariably possess a rich distribution of intramembrane particles on both P and E faces. In early stages of mineralization the exo- and endocuticular zones of the exoskeleton possess a dense Ca-containing lamellar repeat. These bands are unrelated to the helicoidal arrangement of chitin microfibrils. At later stages of development mineral deposits occur within the exocuticle and advance through to the endocuticle. These deposits align with chitin microfibrils and exhibit a helicoidal pattern. Morphological and chemical alterations associated with mineralization and demineralization of the exoskeleton are discussed.     

Ultrastructure of chitin in hyphae ofCandida albicans and other dimorphic and mycelial fungi

Summary Chitin microfibrils exposed by chemical extraction of hyphal walls ofCandida albicans, Histoplasma capsulatum, Blastomyces dermatitidis, Paracoccidiodes brasiliensis, Coprinus cinereus andMucor mucedo were of variable morphology but gave identical infrared spectra and behaved as pure chitin in chromatographic analyses. The microfibrils of the four dimorphic fungi studied were shorter than those in the mouldsC. cinereus andM. mucedo but were similar to those reported for the yeastSaccharomyces cerevisiae. InC. albicans the microfibrils in the septal plates of hyphae were predominantly tangentially orientated and were longer than those in the lateral walls. Microfibrils produced by chitin synthasein vitro were very much longer than any observed from hyphal preparations.     

Two chitin synthases in Saccharomyces cerevisiae

Disruption of the yeast CHS1 gene, which encodes trypsin-activable chitin synthase I, yielded strains that apparently lacked chitin synthase activity in vitro, yet contained normal levels of chitin (Bulawa, C. E., Slater, M., Cabib, E., Au-Young, J., Sburlati, A., Adair, W. L., and Robbins, P. W. (1986) Cell 46, 213-225). It is shown here that disrupted (chs1 :: URA3) strains have a particulate chitin synthetic activity, chitin synthase II, and that wild type strains, in addition to chitin synthase I, have this second activity. Chitin synthase II is measured in wild type strains without preincubation with trypsin, the condition under which highest chitin synthase II activities are obtained in extracts from the chs1 :: URA3 strain. Chitin synthase II, like chitin synthase I, uses UDP-GlcNAc as substrate and synthesizes alkali-insoluble chitin (with a chain length of about 170 residues). The enzymes are equally sensitive to the competitive inhibitor Polyoxin D. The two chitin synthases are distinct in their pH and temperature optima, and in their responses to trypsin, digitonin, N-acetyl-D-glucosamine, and Co2+. In contrast to the report by Sburlati and Cabib (Sburlati, A., and Cabib, E. (1986) Fed. Proc. 45, 1909), chitin synthase II activity in vitro is usually lowered on treatment with trypsin, indicating that chitin synthase II is not activated by proteolysis. Chitin synthase II shows highest specific activities in extracts from logarithmically growing cultures, whereas chitin synthase I, whether from growing or stationary phase cultures, is only measurable after trypsin treatment, and levels of the zymogen do not change. Chitin synthase I is not required for alpha-mating pheromone-induced chitin synthesis in MATa cells, yet levels of chitin synthase I zymogen double in alpha factor-treated cultures. Specific chitin synthase II activities do not change in pheromone-treated cultures. It is proposed that of yeast's two chitin synthases, chitin synthase II is responsible for chitin synthesis in vivo, whereas nonessential chitin synthase I, detectable in vitro only after trypsin treatment, may not normally be active in vivo.     

Individual chitin synthase enzymes synthesize microfibrils of differing structure at specific locations in the Candida albicans cell wall

The shape and integrity of fungal cells is dependent on the skeletal polysaccharides in their cell walls of which beta(1,3)-glucan and chitin are of principle importance. The human pathogenic fungus Candida albicans has four genes, CHS1, CHS2, CHS3 and CHS8, which encode chitin synthase isoenzymes with different biochemical properties and physiological functions. Analysis of the morphology of chitin in cell wall ghosts revealed two distinct forms of chitin microfibrils: short microcrystalline rodlets that comprised the bulk of the cell wall; and a network of longer interlaced microfibrils in the bud scars and primary septa. Analysis of chitin ghosts of chs mutant strains by shadow-cast transmission electron microscopy showed that the long-chitin microfibrils were absent in chs8 mutants and the short-chitin rodlets were absent in chs3 mutants. The inferred site of chitin microfibril synthesis of these Chs enzymes was corroborated by their localization determined in Chsp-YFP-expressing strains. These results suggest that Chs8p synthesizes the long-chitin microfibrils, and Chs3p synthesizes the short-chitin rodlets at the same cellular location. Therefore the architecture of the chitin skeleton of C. albicans is shaped by the action of more than one chitin synthase at the site of cell wall synthesis.     

昆虫几丁质合成及其调控研究前沿

几丁质合成与降解是昆虫最重要的生理过程之一。本文根据国外和作者自己的研究,综述了昆虫几丁质合成及其调控研究进展。昆虫几丁质的生物合成通路始于海藻糖,终止于几丁质,其中共有8个酶参与。目前研究最多的为海藻糖酶和几丁质合成酶。昆虫存在2个海藻糖酶基因和2个几丁质合成酶基因。可溶性海藻糖酶基因对昆虫表皮的几丁质合成影响更大,而膜结合海藻糖酶基因则主要影响中肠的几丁质合成。几丁质合成酶A主要负责表皮和气管几丁质的合成,而几丁质合成酶B则负责中肠围食膜的几丁质合成。目前,昆虫几丁质合成的调控途径主要有两种:利用RNAi技术和几丁质合成抑制剂。     

昆虫几丁质合成酶及其抑制剂

几丁质合成酶(CS)是几丁质合成的关键酶,它具有3个结构域:结构域A、结构域B和结构域C,其中结构域B是催化域。根据氨基酸序列的差异,几丁质合成酶分为两类:CS-A及CS-B,分别在表皮及围食膜基质中催化合成几丁质。关于几丁质合成有2种假想模型。有多种抑制剂可以抑制几丁质的合成,其中核苷肽抗生素类及核苷磷酸类作用于CS的催化部位,是竞争性抑制剂,其它抑制剂的作用机理仍不明确。     

几丁质合酶在人类致病真菌中的研究进展

抑制真菌细胞壁的合成常作为防治真菌感染的安全有效手段。几丁质是真菌细胞壁及隔膜的重要结构成分，几丁质合酶是催化几丁质合成的关键酶。真菌细胞中几丁质合酶家族的不同成员在调控几丁质的合成中存在着差异，因此产生不同的生物学效应。本文通过综述几丁质合酶在人体三大条件致病真菌白色念珠菌、烟曲霉、新生隐球菌中的研究进展，分析了几丁质合酶对真菌致病性影响的机制，总结了几丁质合酶调控真菌细胞增殖、形态转换、病原菌与宿主的相互作用和细胞壁损伤诱导的补偿效应，展望了抗真菌感染的新策略及关于真菌几丁质合酶的未来研究方向。     

Chitin biosynthesis by a fungal membrane preparation. Evidence for a transient non-crystalline state of chitin

Chitin synthase activity of membrane preparations from hyphae of Schizophyllum commune was strongly inhibited by added chitinase because chitin immediately after its synthesis was highly susceptible to chitinase. In the absence of synthesis, chitin became more resistant to chitinase with time. Chitin synthesized in the presence of the optical brightener Calcofluor White M2R was extremely susceptible to degradation by chitinase and this susceptibility was maintained for a long time. X-ray diffraction analysis of chitin synthesized in the presence of Calcofluor revealed the absence of crystallinity as long as the material was kept in wet conditions. After drying, discrete deflections characteristic for alpha-chitin appeared concomitant with a decrease in the susceptibility for chitinase. These results strongly suggest the existence of a gap between polymerization and crystallization of chitin chains.     

A chitin synthase and its regulator protein are critical for chitosan production and growth of the fungal pathogen Cryptococcus neoformans

Chitin is an essential component of the cell wall of many fungi. Chitin also can be enzymatically deacetylated to chitosan, a more flexible and soluble polymer. Cryptococcus neoformans is a fungal pathogen that causes cryptococcal meningoencephalitis, particularly in immunocompromised patients. In this work, we show that both chitin and chitosan are present in the cell wall of vegetatively growing C. neoformans yeast cells and that the levels of both rise dramatically as cells grow to higher density in liquid culture. C. neoformans has eight putative chitin synthases, and strains with any one chitin synthase deleted are viable at 30 degrees C. In addition, C. neoformans genes encode three putative regulator proteins, which are homologs of Saccharomyces cerevisiae Skt5p. None of these three is essential for viability. However, one of the chitin synthases (Chs3) and one of the regulators (Csr2) are important for growth. Cells with deletions in either CHS3 or CSR2 have several shared phenotypes, including sensitivity to growth at 37 degrees C. The similarity of their phenotypes also suggests that Csr2 specifically regulates chitin synthesis by Chs3. Lastly, both chs3Delta and the csr2Delta mutants are defective in chitosan production, predicting that Chs3-Csr2 complex with chitin deacetylases for conversion of chitin to chitosan. These data suggest that chitin synthesis could be an excellent antifungal target.     

Radiation induced formation of giant cells(Saccharomyces uvarum)

X-irradiated yeast cells (Saccharomyces uvarum) grown in liquid media stop mitosis and form giant cells. Chitin ring formation, being a prerequisite for cell separation, was studied by fluorescence microscopy using calcofluor white, a chitin specific dye. Experiments with inhibitors of DNA synthesis (hydroxyurea) and chitin synthesis (polyoxin D) demonstrate chitin ring formation to be dependent on DNA synthesis, whereas bud formation is independent of DNA synthesis and chitin ring formation respectively. Basing on these results the formation of X-ray induced giant cells implies one DNA replication which in turn induces the formation of only one chitin ring between mother cell and giant bud. Obviously no septum can be formed. Thus cell separation does not occur, but the bud already formed, produces another bud demonstrating that bud formation itself is independent of DNA synthesis.     

Chitin synthesis inhibitors: old molecules and new developments

Abstract Chitin is the most abundant natural aminopolysaccharide and serves as a structural component of extracellular matrices. It is found in fungal septa, spores, and cell walls, and in arthropod cuticles and peritrophic matrices, squid pens, mollusk shells, nematode egg shells, and some protozoan cyst walls. As prokaryotes, plants and vertebrates including humans do not produce chitin, its synthesis is considered as an attractive target site for fungicides, insecticides, and acaricides. Although no chitin synthesis inhibitor has been developed into a therapeutic drug to treat fungal infections in humans, a larger number of compounds have been successfully launched worldwide to combat arthropod pests in agriculture and forestry. This review summarizes the latest advances on the mode of action of chitin synthesis inhibitors with a special focus on those molecules that act on a postcatalytic step of chitin synthesis.     

Formation,properties and degradation of the peritrophic membranes of larval and adult fleshflies,Parasarcophaga argyrostoma (Insecta,Diptera)

Summary Parasarcophaga argyrostoma larvae continuously secrete a single, tube-like peritrophic membrane (PM), which has an electron-dense layer on the lumen side and a thicker chitin-containing electron-lucent part on the epithelium side. In the adult fleshfly, the secretion of PMs starts immediately after emergence. The initial part of the PMs is twisted and tight. The formation zone is folded with two separate secretory pads in which two tube-like PMs are formed continuously. The PMs are different, morphologically and with respect to their peripheral carbohydrate residues. The latter could be demonstrated with lectin gold conjugates. PM 1 consists of an electron-dense, chitin-free layer on the lumen side and a thicker part which contains chitin microfibrils in the matrix. PM 2 appears fluffy and has chitin microfibrils in its matrix, too. Chitin could be localized with WGA gold. Incubation of isolated PM 1 with lectin gold resulted in a peculiar pattern of bound lectins and gaps on the electron dense layer which otherwise appeared to be homogenous. Degradation of peritrophic membranes takes place in the hindgut. The cuticle of the anterior hindgut is studded with small teeth, which seem to be responsible for mechanical degradation of the peritrophic membranes into frayed pieces. This may be completed by the teeth on the rectal pads. From the appearance of the remnants of the peritrophic membranes it can be inferred that chemical degradation takes place in the hindgut.Supported by the Deutsche Forschungsgemeinschaft     

On the nature and formation of the fibrillar nets produced by protoplasts of Saccharomyces cerevisiae in liquid media: an electronmicroscopic, X-ray diffraction and chemical study.

The nets produced by protoplasts of Saccharomyces cerevisiae in liquid culture media consisted of microfibrils about 20 nm wide, forming flat, fairly straight bundles of variable width and length, up to about 500 nm wide and 4 mum long. Ends of microfibrils were seldom found. They were not attacked by chitinase or dilute acids, but the net structure disappeared in 3% (w/v) NaOH, leaving about 60% dry wt of the nets as partly microfibrillar clusters. The X-ray powder pattern from the nets, in contrast to that from normal walls, exhibited a set of well-defined rings which identified two micro-crystalline constituents: chitin and unbranched chains of beta-(1 leads to 3)-linked D-glucose residues. These latter were the alkali-soluble fraction. The X-ray diagram of the glucan, corresponding to that of paramylon, indicated an in vivo crystal modification. Up to 15% dry wt was chitin which was found de novo by the protoplasts. A fine net structure of microfibrils about 7-5 to 10 nm thick with meshes about 20 to 60 nm wide was demonstrated in normal walls, forming the entire inner layer and consisting mainly of yeast glucan. This glucan and chitin were only slightly crystalline in these walls. The features of the glucan and chitin of the protoplast nets indicate that enzymes active in normal wall formation were differentially removed or inactivated by the liquid medium.     

Proteins involved in the production and perception of oligosaccharides in relation to plant and animal development.

Chitin oligosaccharides and their derivatives are involved in developmental and defence-related signalling pathways. Major advances include the structural identification of lectins involved in development that bind chitin oligosaccharides and the links between chitin oligosaccharide and hyaluronan synthesis. Also, recent advances in the understanding of the biological role of oligosaccharides are summarised in a model for multistep glycan recognition.     

Effects of benzoylphenylurea on chitin synthesis and orientation in the cuticle of the Drosophila larva

Chitin is an essential constituent of the insect exoskeleton, the cuticle, which is an extracellular matrix (ECM) covering the animal. It is produced by the glycosyltransferase chitin synthase at the apical plasma membrane of epidermal and tracheal cells. To fulfil its role in cuticle elasticity and stiffness it associates with proteins, thereby adopting a stereotypic arrangement of helicoidally stacked sheets, which run parallel to the surface of the animal. One approach to understand the mechanisms of chitin synthesis and organisation is to dissect these processes genetically. However, since only a few genes coding for factors involved in chitin synthesis and organisation have been identified to date using the model arthropod Drosophila melanogaster insight arising from mutant analysis is rather limited. To collect new data on the role of chitin during insect cuticle differentiation, we have analysed the effects of chitin synthesis inhibitors on Drosophila embryogenesis. For this purpose, we have chosen the benzoylphenylurea diflubenzuron and lufenuron that are widely used as insect growth regulators. Our data allow mainly two important conclusions. First, correct organisation of chitin seems to directly depend on the amount of chitin synthesised. Second, chitin synthesis and organisation are cell-autonomous processes as insecticide-treated larvae display a mosaic of cuticle defects. As benzoylphenylurea are used not only as insecticides but also as anti-diabetic drugs, the study of their impact on Drosophila cuticle differentiation may be fruitful for understanding their mode of action on a cellular pathway that is seemingly conserved between vertebrates and invertebrates.     

Chitin synthase III activity,but not the chitin ring,is required for remedial septa formation in budding yeast

Chitin is a minor but essential component of the Saccharomyces cerevisiae cell wall. In wild-type, chitin synthase II is required for the formation of primary septa and chitin synthase III (CSIII) is not essential. However, in chs2 mutants CSIII becomes essential for the formation of aberrant septa. We examined which of two CSIII functions, the formation of a chitin ring at bud emergence or of chitin in the remedial septa, was required for viability. By using cell cycle synchronization in combination with nikkomycin Z, a specific inhibitor of CSIII, we inhibited chitin synthesis in a chs2 mutant, during formation of either the ring or the remedial septa. The results show that only synthesis of the chitin during aberrant septa formation is essential for viability. Thus, the unique function of the chitin ring seems to be maintenance of the integrity of the mother-bud neck, as we recently found, and the importance of chitin in septum closure, both in normal and abnormal situations, is underlined.     

Organisation of wing cuticle in Locusta migratoria linnaeus,Tropidacris cristata linnaeus and Romalea microptera beauvais (Orthoptera : Acrididae)

The composite fibrous architectures of the wing cuticles of Locusta migratoria, Tropidacris (= Eutropidacris) cristata and Romalea microptera (Orthoptera : Acrididae) have been established. The wing cuticle in all the 3 species consists of: (i) an exocuticle, which is either pigmented or birefringent, and which under an electron microscope shows constantly helicoidal architecture of chitin microfibrils; (ii) endocuticle, which shows alternately birefringent and isotropic layers when sectioned transversely across the wing veins; these layers show helicoidal and unidirectional architecture, respectively of chitin microfibrils under the electron microscope. In transverse section, the chitin microfibrils appear as clear rods (2.8 nm in diameter) in a darkly stained matrix. However, in the hinge called the “claval furrow”, these microfibrils are considerably larger, being 25 nm in diameter. This presumably gives sufficient hardness to the claval hinge, which is the most vulnerable area for wear and tear during flight. The pore canals follow the parabolic pattern of microfibrils in the helicoidal layer, but remain straight in the unidirectional layers. The thickness of wing cuticle increases up to about 10–12 days, the time at which the acridids most probably attain the optimum flight ability. It is suggested that changes in the wing cuticle are related to increased wing beat frequency and speed of flight with age, and may help in resisting the simultaneous increase in the bending and twisting forces on the wing.