TraM of plasmid R1 controls transfer gene expression as an integrated control element in a complex regulatory network

Site-directed mutagenesis was used to investigate the functions of the traM gene in plasmid R1-mediated bacterial conjugation. Three mutant alleles, a null mutation, a sense mutation and a stop mutation, were recombined back into the R1-16 plasmid, a transfer-derepressed ( finO  ⁻) variant of plasmid R1. The frequency of conjugative transfer of the traM null mutant derivative of R1-16 was 10⁷-fold lower than that of the isogenic parent plasmid, showing the absolute requirement for this gene in conjugative transfer of plasmid R1. Measurements of the abundance of plasmid specified traJ , traA and traM mRNAs, TraM protein levels, and complementation studies indicated that the traM gene of plasmid R1 has at least two functions in conjugation: (i) positive control of transfer gene expression; and (ii) a function in a process distinct from gene expression. Since expression of the negatively autoregulated traM gene is itself affected positively by the expression of the transfer operon genes, this gene constitutes a decisive element within a regulatory circuit that co-ordinates expression of the genes necessary for horizontal DNA transfer. Based on our studies, we present a novel model for the regulation of the transfer genes of plasmid R1 that might also be applicable to other IncF plasmids.     

Repressor gene finO in plasmids R100 and F: constitutive transfer of plasmid F is caused by insertion of IS3 into F finO.

Fertility factor F confers bacterial conjugation, a process which involves at least 20 tra genes. Resistance plasmids such as R100, R6-5, and R1 have homology with F in the tra region. Conjugal transfer of these plasmids is, however, repressed, while transfer of F is constitutive. Repression of R transfer is due to the existence of the two genes, called finO and finP; constitutive transfer of F is believed to be due to a lack of finO in F. In this paper, we report the identification and DNA sequence of the finO gene of R100, encoding a protein of 21,265 daltons. We show that F does actually encode finO, but the gene has been inactivated by insertion of IS3. Lederberg and Tatum (Nature [London] 158:558, 1946), who discovered sexuality in bacteria, may have had an Escherichia coli K-12 strain harboring such an finO F factor, which facilitated the generation of recombinant progeny useful for genetic analysis of bacteria and established the foundation for molecular genetics.     

Control of replication of FII plasmids: comparison of the basic replicons and of the copB systems of plasmids R100 and R1

The copy numbers of the FII plasmids R1 and R100 were determined in four different ways and found to be identical. Deletion of one of the copy number control genes, copB, together with its promoter gives rise to plasmid copy mutants with an increased copy number. The increase was found to be 8- and 3.5-fold for plasmids R1 and R100, respectively. These deletion derivatives were found to be extremely sensitive to the presence of CopB activity from their own parent plasmid but not to that of the other plasmid. Hence, the CopB protein and its target are plasmid-specific and not FII-group-specific. These results are consistent with the high degree of nonhomology between plasmids R1 and R100 in a 250-bp region covering the distal part of the copB gene and the repA promoter region, which contains the target for the CopB protein.     

Mapping of RNA polymerase binding sites in R12 derived plasmids carrying the replication-incompatibility region and the insertion element IS1.

Interactions between Escherichia coli RNA polymerase holoenzyme and three small plasmid DNAs (pSM1, pSM2, and pSM15) derived from the drug resistant factor R12 have been studied. These plasmids carry the copy number and incompatibility determinants, the origin of DNA replication and the rep gene(s) necessary for plasmid replication. They also contain the insertion element IS1 and the putative finO cistron. Thirteen DNA segments within the largest of the three plasmids (pSM2) were able to form either a binary and/or ternary complex with RNA polymerase. A unique strong binding site was mapped within the left end of IS1. Five binding sites were found within the rep-cop-inc region. Four of these are weak binding sites whereas the fifth does not form a stable binary complex and was detected by ternary complex formation. A strong binding site was located in the putative finO region whereas the remaining six binding sites are located in regions with unidentified genetic functions.     

Gene 19 of plasmid R1 is required for both efficient conjugative DNA transfer and bacteriophage R17 infection.

F-like plasmids require a number of genes for conjugation, including tra operon genes and genes traM and traJ, which lie outside the tra operon. We now establish that a gene in the "leading region," gene 19, provides an important function during conjugation and RNA phage infection. Mutational inactivation of gene 19 on plasmid R1-16 by introduction of two nonpolar stop codons results in a 10-fold decrease in the conjugation frequency. Furthermore, infection studies with the male-specific bacteriophage R17 revealed that the phage is not able to form clear plaques in Escherichia coli cells carrying an R1-16 plasmid with the defective copy of gene 19. The total number of cells infected by phage R17 is reduced by a factor of 10. Both the conjugation- and infection-attenuated phenotypes caused by the defective gene 19 can be complemented in trans by introducing gene 19 alleles encoding the wild-type protein. Restoration of the normal phenotypes is also possible by introduction of the pilT gene encoded by the unrelated IncI plasmid R64. Our functional studies and similarities of protein 19 to proteins encoded by other DNA transfer systems, as well as the presence of a conserved motif in all of these proteins (indicative for a putative muramidase activity) suggest that protein 19 of plasmid R1 facilitates the passage of DNA during conjugation and entry of RNA during phage infection.     

Molecular cloning and functional characterization of a copy number control gene (copB) of plasmid R1.

Deletions or insertions in the copB gene of plasmid R1 result in a copy mutant phenotype. The wild-type copB gene has been cloned on various plasmid vectors. The presence of such chimeric plasmids reduced the copy number of R1 copB mutant plasmids to normal or subnormal levels, indicating the expression of a trans-acting inhibitor activity from the copB chimeras. However, the cloned copB gene did not affect the copy number of wild-type R1, and no incompatibility was exerted by the cloned copB gene against wild-type R1 (or R100). Although the copB gene is not normally required for the incompatibility exerted by copA, it is shown that the CopB function is required for expression of incompatibility by the copA gene from some types of chimeric plasmids. Mutant plasmids that have lost both Cop functions replicate in an uncontrolled fashion.     

Clustering of genes involved in replication, copy number control, incompatibility, and stable maintenance of the resistance plasmid R1drd-19.

Plasmid R1drd-19 is present in a small number of copies per cell of Escherichia coli. The plasmid was reduced in size by in vivo as well as in vitro (cloning) techniques, resulting in a series of plasmid derivatives of different molecular weight. All plasmids isolated contain a small region (about 2 x 10(6) daltons of deoxyribonucleic acid) of the resistance transfer factor part of the plasmid located close to one of the IS1 sequences that separates the resistance transfer factor part from the resistance determinant. All these derivatives were present at the same copy number, retained the incompatibility properties of plasmid R1drd-19, and were stably maintained during cell division. Genes mutated to yield copy mutations also were found to be located in the same region.     

finO sequences on conjugally repressed and derepressed F-like plasmids

DNA-DNA hybridization studies have demonstrated the physical relatedness of the fertility inhibition gene, finO, among both FinO+ and FinO- F-like conjugative plasmids, viz. ColV2-K94, R100-1,R1drd19,R1,R6-5, UCR123, R386, p307, R453, R773, and pIP162-1. Furthermore, the data indicate that finO sequences on the FinO- plasmid ColV2-K94 map downstream of the transfer region, within 93.6-95.3 ColV2-K94.     

Sequence and conservation of genes at the distal end of the transfer region on plasmids F and R6-5

The nucleotide sequence of the region downstream of transfer gene traI, including fertility inhibition gene finO, on the conjugative plasmids F and R6-5, has been determined. Analysis of the F sequence revealed two open reading frames (ORF's), ORF248 and ORF186; ORF186 (finO) is interrupted by the insertion of IS3. The R6-5 sequence also contained ORF248 and an intact ORF186, although an additional ORF (ORF286) was located between the two genes. ORF248, which we have designated traX, and ORF186 (finO) are highly conserved on both plasmids. The organisation of these genes indicates that traI and traX on F, and traI, traX and ORF286 on R6-5 are co-transcribed from their respective promoters upstream of traI. Sequences homologous to traX were detected on a range of conjugative F-like plasmids, whereas sequences homologous to ORF286 were only found on plasmids R6-5, R100 and R1. The conservation of traX sequences suggests a functional importance for that gene and/or its product.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

Control of Plasmid R1 Replication: Functions Involved in Replication, Copy Number Control, Incompatibility, and Switch-off of Replication

A small derivative of plasmid R1 was used to integratively suppress a chromosomal dnaA(Ts) mutation. The strain obtained grew normally at 42°C. The integratively suppressed strain was used as recipient for various plasmid R1 derivatives. Plasmid R1 and miniplasmid derivatives of R1 could be established in the strain that carried an integrated R1 replicon, but they were rapidly lost during growth. However, plasmids also carrying ColE1 replication functions were almost completely stably inherited. The integratively suppressed strain therefore allows the establishment of bacteria diploid with respect to plasmid R1 and forms a useful and sensitive system for studies of interaction between plasmid R1 replication functions. Several of the chimeric plasmids caused inhibition of growth at high temperatures. All plasmids that inhibited growth carried one particular PstI fragment from plasmid R1 (the PstI F fragment), and in all cases the growth inhibition could be ascribed to repression of initiation of chromosome replication at 42°C, i.e., they carry a trans-acting switch-off function. Furthermore, the analogous PstI fragments from different copy mutants of plasmid R1 were analyzed similarly, and one mutant was found to lack the switch-off function. The different chimeric plasmids were also tested for their incompatibility properties. All plasmids that carried the switch-off function (and no other plasmids) also carried R1 incompatibility gene(s). Since the PstI F fragment, which is present on all these plasmids, is very small (0.35 × 10⁶), it is suggested that the switch-off regulation of replication (by an inhibitor), incompatibility, and copy number control are governed by the same gene.     

Nucleotide sequence and characterization of the trbABC region of the IncI1 Plasmid R64: existence of the pnd gene for plasmid maintenance within the transfer region.

A 6.72-kb DNA sequence between the exc gene and the oriT operon within the transfer region of IncI1 plasmid R64 was sequenced and characterized. Three novel transfer genes, trbA, trbB, and trbC, were found in this region, along with the pnd gene responsible for plasmid maintenance. The trbABC genes appear to be organized into an operon located adjacent to the oriT operon in the opposite orientation. The trbA and trbC genes were shown to be indispensable for R64 plasmid transfer, while residual transfer activity was detected in the case of R64 derivatives carrying the trbB++ deletion mutation. The T7 RNA polymerase-promoter system revealed that the trbB gene produced a 43-kDa protein and the trbC gene produced an 85-kDa protein. The nucleotide sequence of the pnd gene is nearly identical to that of plasmid R483, indicating a function in plasmid maintenance. The plasmid stability test indicated that the mini-R64 derivatives with the pnd gene are more stably maintained in Escherichia coli cells under nonselective conditions than the mini-R64 derivatives without the pnd gene. It was also shown that the R64 transfer system itself is involved in plasmid stability to a certain degree. Deletion of the pnd gene from the tra+ mini-R64 derivative did not affect transfer frequency. DNA segments between the exc and trbA genes for IncI1 plasmids R64, Colb-P9, and R144 were compared in terms of their physical and genetic organization.     

Stable inheritance of plasmid R1 requires two different loci.

The largest EcoRI fragment from plasmid R1 mediates a stability phenotype which is required to ensure the stable inheritance of this low-copy-number plasmid. When covalently linked to small, unstable R1 derivatives, this fragment makes the plasmids as stable as the wild-type R1 plasmid. A genetic analysis showed that two independently acting stabilization functions are encoded by this EcoRI fragment, both of which have the potential of partial stabilization of mini-R1 plasmids. The two loci are located at opposite ends of the fragment. Stabilization was also obtained by inserting these regions in unrelated, unstable plasmids from the p15 group. One of the two functions was very efficient in stabilizing such foreign replicons. Besides the stability phenotype, these genes exert incompatibility in an allele-specific manner. The stability functions do not seem to interfere seriously with the copy number of the plasmid.     

Characterization of the Tra2 Region of the IncHI1 Plasmid R27

In this study, the DNA sequence of one of the transfer regions of the IncHI1 plasmid R27 was determined. This region, which corresponds to coordinates 0-40 on the R27 map has been called the Tra2 region, and is believed to be involved in mating pair formation. DNA sequence analysis of the transfer region identified 11 open reading frames which showed similarities to the transfer genes from other conjugative systems. The R27 transfer genes appear to most closely resemble the genes from the F plasmid and Sphingomonas aromaticivorans plasmid pNL1, both within the individual genes and in the overall gene order. The Tra2 region is also distinct in that replication, partitioning, and stability genes are found in the middle of the transfer region. The R27 Tra2 region also contains a gene, trhF, which appears to be related to the TraF genes of Agrobacterium and Rhizobium species. This, along with the temperature-sensitive transfer system found in both H plasmids and Agrobacterium, leads to the speculation that the R27 transfer region evolved from both ancestral F-like and P-like plasmids.     

Promoter-distal region of the tra operon of F-like sex factor R100 in Escherichia coli K-12.

The distal region of the tra (transfer) operon of F-like plasmid R100 was investigated, using small plasmids derived from R100, primarily the plasmid pSM6. The transposon Tn5 (which confers kanamycin resistance) was inserted at different positions into pSM6, and the transposition derivatives were tested for ability to complement defined tra mutants of the F sex factor. Thus, the tra genes traH, G, T, and D were localized on the plasmid R100. A restriction map of pSM6 was constructed, and the locations of the insertions were mapped, using restriction endonuclease digestion of the plasmid DNA and exploiting the fact that several restriction sites are localized in the inverted repeat regions of the transposon. The gene products of the genes traG, S, T, and D were identified by radioactive labeling of proteins synthesized in minicells carrying the various insertion plasmids followed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The presence of another transfer gene, traI, was inferred from these data. Another protein, the r2-A protein, was also identified, and its gene was mapped. On the basis of the data, a best-fit physical map of this region of the tra operon of R100 was constructed. The results confirmed that the general order and size of the distal transfer genes is as in the F sex factor, but showed that differences exist with respect to all of the gene products. The significance of these differences are discussed in the light of the genetic and physical homology (Manning et al., J. Bacteriol. 150:76-88) of the transfer regions.     

Mapping of transfer regions within incompatibility group HI plasmid R27.

Plasmids of incompatibility group HI are large (greater than 150 kilobases [kb]) and possess an unusual thermosensitive mode of conjugative transfer. R27, the prototype IncHi1 plasmid, encodes resistance to tetracycline via a determinant which is related to transposon Tn10. A restriction endonuclease map of R27 (size, 182 kb) was recently constructed with ApaI, PstI, and XbaI. Transfer genes within R27 were mapped by insertion of Tn5 and Tn7. At least two different regions of the plasmid were concerned with transfer functions. Insertions into either region completely abolished transfer. None of the insertions had any effect on entry exclusion (Eex) of other IncH plasmids. However, a deletion mutant which lacked the Eex function was obtained, allowing us to map the probable site of the gene encoding Eex to one of the two transfer regions. The tetracycline resistance determinant in R27 was located within an 8-kb region between the two main transfer regions. The transfer genes, therefore, are not located together in R27 but are situated in at least two major widely separated transfer regions.