Bacterial desorption from food container and food processing surfaces

The desorption ofStaphylococcus aureus, Acinetobacter calcoaceticus, and a coryneform from the surfaces of materials used for manufacturing food containers (glass, tin plate, and polypropylene) or postprocess canning factory conveyor belts (stainless steel and nylon) was investigated. The effect of time, pH, temperature, and adsorbed organic layers on desorption was studied.S. aureus did not detach from the substrata at any pH investigated (between pH 5 and 9).A. calcoaceticus and the coryneform in some cases detached, depending upon pH and substratum composition. The degree of bacterial detachment from the substrata was not related to bacterial respiration at experimental pH values. Bacterial desorption was not affected by temperature (4–30°C) nor by an adsorbed layer of peptone and yeast extract on the substrata. The results indicate that bacterial desorption, hence bacterial removal during cleaning or their transfer via liquids flowing over colonized surfaces, is likely to vary with the surface composition and the bacterial species colonizing the surfaces.     

Biofuels from food processing wastes

1. Download : Download high-res image (115KB)
2. Download : Download full-size image

     

Microbes in food processing technology

Abstract: There is an increasing understanding that the microbial quality of a certain food is the result of a chain of events. It is clear that the microbial safety of food can only be guaranteed when the overall processing, including the production of raw materials, distribution and handling by the consumer are taken into consideration. Therefore, the microbiological quality assurance of foods is not only a matter of control, but also of a careful design of the total process chain. Food industry has now generally adapted quality assurance systems and is implementing the Hazard Analysis Critical Control Point (HACCP) concept. Rapid microbiological monitoring systems should be used in these cases. There is a need for rapid and simple microbiological tests which can be adapted to the technology and logistics of specific production processes. Traditional microbiological methods generally do not meet these high requirements. This paper discusses the tests, based on molecular biological principles, to detect and identify microbes in food-processing chains. Tests based on DNA technology are discussed, including in vitro DNA amplification like the polymerase chain reaction (PCR) method and identifications based on RFLP, RAPD and DNA fingerprinting analysis. PCR-haled methodology can be used for the rapid detection of microbes in food manufacturing environments. In addition, DNA fingerprinting methods are suitable for investigating sources and routes of microbial contamination in the food cycle.     

High-pressure processing – effects on microbial food safety and food quality

High-pressure processing (HPP) is a nonthermal process capable of inactivating and eliminating pathogenic and food spoilage microorganisms. This novel technology has enormous potential in the food industry, controlling food spoilage, improving food safety and extending product shelf life while retaining the characteristics of fresh, preservative-free, minimally processed foods. As with other food processing methods, such as thermal processing, HPP has somewhat limited applications as it cannot be universally applied to all food types, such as some dairy and animal products and shelf-stable low-acid foods. Herein, we discuss the effects of high-pressure processing on microbial food safety and, to a lesser degree, food quality.     

Effects of food processing on the stability of food allergens

The ubiquitous presence of allergens in the human food supply coupled with increased awareness of food allergies warrants undertaking appropriate preventive measures to protect sensitive consumers from unwanted exposure to offending food allergens. Attempts to reduce or eliminate food allergenicity through food processing have met with mixed results. The rationale for using food processing to reduce/eliminate allergenicity and limitations to using this approach are discussed.     

Metal-chelate regenerable carriers in food processing

Summary Potential application of metal-chelate regenerable carriers in food processing has been considered for lacease (EC. 1.10.3.2.) immobilization. Among the carriers tested, Sepharose 4B-Epi-IDA-Cu²⁺ with immobilized enzyme showed the highest activity towards phenolic compounds, removing 75 and 69% of catechin from model solutions eluted from the starting and regenerated carriers, respectively. These carriers were also characterized by high stability.     

High pressure processing for food safety

Food preservation using high pressure is a promising technique in food industry as it offers numerous opportunities for developing new foods with extended shelf-life, high nutritional value and excellent organoleptic characteristics. High pressure is an alternative to thermal processing. The resistance of microorganisms to pressure varies considerably depending on the pressure range applied, temperature and treatment duration, and type of microorganism. Generally, Gram-positive bacteria are more resistant to pressure than Gram-negative bacteria, moulds and yeasts; the most resistant are bacterial spores. The nature of the food is also important, as it may contain substances which protect the microorganism from high pressure. This article presents results of our studies involving the effect of high pressure on survival of some pathogenic bacteria -- Listeria monocytogenes, Aeromonas hydrophila and Enterococcus hirae -- in artificially contaminated cooked ham, ripening hard cheese and fruit juices. The results indicate that in samples of investigated foods the number of these microorganisms decreased proportionally to the pressure used and the duration of treatment, and the effect of these two factors was statistically significant (level of probability, P 相似文献   

Phages as friends and enemies in food processing

1. Download : Download high-res image (93KB)
2. Download : Download full-size image

     

Increasing the solubility and degradability of food processing biosolids

Biosolids (BS) from food processing plants are usually put on land or in landfills. They contain nutrients and could be fed to animals, but low digestibility is a limitation. Lab tests were conducted to evaluate treatments that might increase digestibility of BS.

Biosolids were extruded or treated with chemicals and filtered; residues were incubated with proteases. Dry matter disapperance (DMD), measured as weight loss of treated material following filtration, was considered an indicator of digestibility.

The DMD of extruded BS (31–35%) was greater than oven-dried BS (20–27%). Increasing extruder temperature or speed increased DMD by small but significant amounts. Chemical treatment of BS with HCL, AP and NaOH significantly increased DMD to 60–70%; increases were larger than responses to extrusion. Responses were attained differently; on one hand, for HCL and AP treatments, about 50% of the increase in DMD was due to solubilization and 50% due to degradation. On the other hand, NaOH acted almost completely by solubilization. Increased DMD infers that BS should have increased digestibility when fed to animals, but feeding studies are needed for substantiation.     

High pressure-low temperature processing of food proteins

High pressure-low temperature (HP-LT) processing is of interest in the food field in view of: (i) obtaining a "cold" pasteurisation effect, the level of microbial inactivation being higher after pressurisation at low or sub-zero than at ambient temperature; (ii) limiting the negative impact of atmospheric pressure freezing on food structures. The specific effects of freezing by fast pressure release on the formation of ice I crystals have been investigated on oil in water emulsions stabilized by proteins, and protein gels, showing the formation of a high number of small ice nuclei compared to the long needle-shaped crystals obtained by conventional freezing at 0.1 MPa. It was therefore of interest to study the effects of HP-LT processing on unfolding or dissociation/aggregation phenomena in food proteins, in view of minimizing or controlling structural changes and aggregation reactions, and/or of improving protein functional properties. In the present studies, the effects of HP-LT have been investigated on protein models such as (i) beta-lactoglobulin, i.e., a whey protein with a well known 3-D structure, and (ii) casein micelles, i.e., the main milk protein components, the supramolecular structure of which is not fully elucidated. The effects of HP-LT processing was studied up to 300 MPa at low or sub-zero temperatures and after pressure release, or up to 200 MPa by UV spectroscopy under pressure, allowing to follow reversible structural changes. Pressurisation of approximately 2% beta-lactoglobulin solutions up to 300 MPa at low/subzero temperatures minimizes aggregation reactions, as measured after pressure release. In parallel, such low temperature treatments enhanced the size reduction of casein micelles.     

Shewanella putrefaciens adhesion and biofilm formation on food processing surfaces

Laboratory model systems were developed for studying Shewanella putrefaciens adhesion and biofilm formation under batch and flow conditions. S. putrefaciens plays a major role in food spoilage and may cause microbially induced corrosion on steel surfaces. S. putrefaciens bacteria suspended in buffer adhered readily to stainless steel surfaces. Maximum numbers of adherent bacteria per square centimeter were reached in 8 h at 25 degrees C and reflected the cell density in suspension. Numbers of adhering bacteria from a suspension containing 10(8) CFU/ml were much lower in a laminar flow system (modified Robbins device) (reaching 10(2) CFU/cm(2)) than in a batch system (reaching 10(7) CFU/cm(2)), and maximum numbers were reached after 24 h. When nutrients were supplied, S. putrefaciens grew in biofilms with layers of bacteria. The rate of biofilm formation and the thickness of the film were not dependent on the availability of carbohydrate (lactate or glucose) or on iron starvation. The number of S. putrefaciens bacteria on the surface was partly influenced by the presence of other bacteria (Pseudomonas fluorescens) which reduced the numbers of S. putrefaciens bacteria in the biofilm. Numbers of bacteria on the surface must be quantified to evaluate the influence of environmental factors on adhesion and biofilm formation. We used a combination of fluorescence microscopy (4',6'-diamidino-2-phenylindole staining and in situ hybridization, for mixed-culture studies), ultrasonic removal of bacteria from surfaces, and indirect conductometry and found this combination sufficient to quantify bacteria on surfaces.     

Novel applications for microbial transglutaminase beyond food processing

Transglutaminase (EC 2.3.2.13) initially attracted interest because of its ability to reconstitute small pieces of meat into a 'steak'. The extremely high cost of transglutaminase of animal origin has hampered its wider application and has initiated efforts to find an enzyme of microbial origin. Since the early 1990s, many microbial transglutaminase-producing strains have been found, and production processes have been optimized. This has resulted in a rapidly increasing number of applications of transglutaminase in the food sector. However, applications of microbial transglutaminase in other sectors have been explored to a much lesser extent. Here, we will present the wider potential of transglutaminases and discuss recent efforts that could contribute to the realization of their potential.     

Impact of food processing and detoxification treatments on mycotoxin contamination

Mycotoxins are fungal metabolites commonly occurring in food, which pose a health risk to the consumer. Maximum levels for major mycotoxins allowed in food have been established worldwide. Good agricultural practices, plant disease management, and adequate storage conditions limit mycotoxin levels in the food chain yet do not eliminate mycotoxins completely. Food processing can further reduce mycotoxin levels by physical removal and decontamination by chemical or enzymatic transformation of mycotoxins into less toxic products. Physical removal of mycotoxins is very efficient: manual sorting of grains, nuts, and fruits by farmers as well as automatic sorting by the industry significantly lowers the mean mycotoxin content. Further processing such as milling, steeping, and extrusion can also reduce mycotoxin content. Mycotoxins can be detoxified chemically by reacting with food components and technical aids; these reactions are facilitated by high temperature and alkaline or acidic conditions. Detoxification of mycotoxins can also be achieved enzymatically. Some enzymes able to transform mycotoxins naturally occur in food commodities or are produced during fermentation but more efficient detoxification can be achieved by deliberate introduction of purified enzymes. We recommend integrating evaluation of processing technologies for their impact on mycotoxins into risk management. Processing steps proven to mitigate mycotoxin contamination should be used whenever necessary. Development of detoxification technologies for high-risk commodities should be a priority for research. While physical techniques currently offer the most efficient post-harvest reduction of mycotoxin content in food, biotechnology possesses the largest potential for future developments.     

Seasonal grazing rates and food processing by tropical herbivorous fishes

Seasonal variability in grazing rates and food-processing characters were assessed for three abundant fishes in a tropical rocky shore: the damselfish Stegastes fuscus , the parrotfish Sparisoma atomarium , and the surgeonfish Acanthurus bahianus . Significant differences were found in grazing rates among hour of day and seasons, and in food-processing characters among seasons for the three fishes. Grazing rates for S. atomarium and A. bahianus peaked at 1300 and 1400 hours for S. fuscus . Three main periods of different intensity in bite rates, low, intermediate and intense, were identified for all fishes. As expected, total bite rates, ingestion rates and gut fullness were highest in A. bahianus , the largest species studied, followed by S. atomarium and S. fuscus. S. atomarium with fused jaw teeth, holds the highest bite size and S. fuscus the lowest one. Gut turnover was high for S. fuscus and similar for S. atomarium and A. bahianus . Grazing rates and food-processing characters seem to vary between seasons not only due to changes in temperature, but also affected by other factors. Fishes employ different food-processing mechanisms and bear some differences in food-processing characters to achieve optimal energetic supplies from a poor nutrient food resource.     

Newer uses of microbial enzymes in food processing

Microbial enzymes are widely used in food processing: many new enzymes and enzyme processes acting on nearly all types of organic food components — starch, sugars, proteins, fats, fibers, and flavour compounds — have come into the industry during the 1980s and their application has a major impact on enzyme technology in general. The particular roles of immobilized enzymes and genetic engineering in food enzymology are briefly discussed.     

Recent trends in bioethanol production from food processing byproducts

The widespread use of corn starch and sugarcane as sources of sugar for the production of ethanol via fermentation may negatively impact the use of farmland for production of food. Thus, alternative sources of fermentable sugars, particularly from lignocellulosic sources, have been extensively investigated. Another source of fermentable sugars with substantial potential for ethanol production is the waste from the food growing and processing industry. Reviewed here is the use of waste from potato processing, molasses from processing of sugar beets into sugar, whey from cheese production, byproducts of rice and coffee bean processing, and other food processing wastes as sugar sources for fermentation to ethanol. Specific topics discussed include the organisms used for fermentation, strategies, such as co-culturing and cell immobilization, used to improve the fermentation process, and the use of genetic engineering to improve the performance of ethanol producing fermenters.