Morphogenesis of Mimivirus and Its Viral Factories: an Atomic Force Microscopy Study of Infected Cells

Amoebas infected with mimivirus were disrupted at sequential stages of virus production and were visualized by atomic force microscopy. The development of virus factories proceeded over 3 to 4 h postinfection and resulted from the coalescence of 0.5- to 2-μm vesicles, possibly bearing nucleic acid, derived from either the nuclear membrane or the closely associated rough endoplasmic reticulum. Virus factories actively producing virus capsids on their surfaces were imaged, and this allowed the morphogenesis of the capsids to be delineated. The first feature to appear on a virus factory surface when a new capsid is born is the center of a stargate, which is a pentameric protein oligomer. As the arms of the stargate grow from the pentamer, a rough disk the diameter of a capsid thickens around it. This marks the initial emergence of a protein-coated membrane vesicle. The capsid self-assembles on the vesicle. Hillocks capped by different pentameric proteins spontaneously appear on the emerging vesicle at positions that are ultimately occupied by 5-fold icosahedral vertices. A lattice of coat protein nucleates at each of the 5-fold vertices, but not at the stargate, and then spreads outward from the vertices over the surface, merging seamlessly to complete the icosahedral capsid. Filling with DNA and associated proteins occurs by the transfer of nucleic acid from the interior of the virus factory into the nearly completed capsids. The portal, through which the DNA enters, is sealed by a plug of protein having a diameter of about 40 nm. A layer of integument protein that anchors the surface fibers is acquired by the passage of capsids through a membrane enriched in the protein. The coating of surface fibers is similarly acquired when the integument protein-coated capsids pass through a second membrane that has a forest of surface fibers embedded on one side.     

The cell envelope of Thermoproteus tenax: three-dimensional structure of the surface layer and its role in shape maintenance

The sulphur-dependent archaebacterium Thermoproteus tenax has a cylindrical cell shape variable in length, but constant in diameter. Its whole surface is covered by a regular protein layer (S-layer). The lattice has p6 symmetry and a lattice constant of 32.8 nm. The three-dimensional reconstruction from a tilt series of isolated and negatively stained S-layer shows a complex mass distribution of the protein: a prominent, pillar-shaped protrusion is located at the 6-fold crystallographic axis with radiating arms connecting neighbouring hexamers in the vicinity of the 3-fold axis. The base vectors of the S-layer lattice have a preferred orientation with respect to the longitudinal axis of the cell. The layer can be seen as a helical structure consisting of a right-handed, two-stranded helix, with the individual chains running parallel. Supposing that new S-layer protein is inserted at lattice faults (wedge disclinations) near the poles, growing of the layer would then proceed by moving a disclination at the end of the helix. The constant shape of the cell, as well as the particular structure of the layer, strongly suggest that this S-layer has a shape-maintaining function.     

Mapping the structure and function of the E1 and E2 glycoproteins in alphaviruses

The 9 A resolution cryo-electron microscopy map of Sindbis virus presented here provides structural information on the polypeptide topology of the E2 protein, on the interactions between the E1 and E2 glycoproteins in the formation of a heterodimer, on the difference in conformation of the two types of trimeric spikes, on the interaction between the transmembrane helices of the E1 and E2 proteins, and on the conformational changes that occur when fusing with a host cell. The positions of various markers on the E2 protein established the approximate topology of the E2 structure. The largest conformational differences between the icosahedral surface spikes at icosahedral 3-fold and quasi-3-fold positions are associated with the monomers closest to the 5-fold axes. The long E2 monomers, containing the cell receptor recognition motif at their extremities, are shown to rotate by about 180 degrees and to move away from the center of the spikes during fusion.     

Core sequences and a cleavage site wobble pair required for HDV antigenomic ribozyme self-cleavage.

The secondary structures proposed for the cis-acting hepatitis delta virus (HDV) ribozymes contain four duplex regions, three sequences joining the duplexes and two hairpin loops. The core and active site of the ribozyme could be formed by portions of the joining sequences, J1/4 and J4/2, together with one of the hairpin loops, L3. To establish the core region and define essential bases within this putative active site 28 single base changes at 15 positions were made and tested for effects on ribozyme cleavage. At 14 of the 15 positions all of the changes resulted in detectable decreased rates of cleavage. At seven of the positions one or more of the changes resulted in a 500-fold or greater decrease in the observed rate constant for cleavage. Mutations that resulted in 10(3)-fold effects were found in all three regions hypothesized to form the core. At the cleavage site substitutions of the cytosine 5' of the site of cleavage did not provide strong support for a sequence-specific interaction involving this nucleotide. In contrast, an A-C combination was the most effective substitution for a potential G-U pair 3' of the cleavage site, suggesting a requirement for a wobble pair at that position.     

Heavy riboflavin synthase from Bacillus subtilis. Particle dimensions, crystal packing and molecular symmetry

Heavy riboflavin synthase from Bacillus subtilis is an enzyme complex consisting of approximately three alpha-subunits (Mr 23.5 X 10(3)) and 60 beta-subunits (Mr 16 X 10(3)). The enzyme has been crystallized from phosphate buffer in a hexagonal crystal modification that belongs to space group P6(3)22. The asymmetric unit of the crystal cell contains ten beta-subunits. The structure of this unusual 10(6) Mr protein has been studied by small-angle X-ray scattering, electron microscopy of three-dimensional crystals, and crystallographic methods. The scattering curves can be interpreted in terms of a hollow sphere model with a ratio of inner and outer radius of 0.3:1. A diameter of 168 A was estimated from the scattering curves, in close agreement with electron microscopic studies. An aggregate with the stoichiometry beta 60, which was obtained by ligand-driven reaggregation of isolated beta-subunits, showed similar shape and dimensions, but a larger value for the ratio Ri/Ra. Electron micrographs of freeze-etched enzyme crystals showed approximately spherical molecules, which were arranged in hexagonal layers. The lattice constants found from the micrographs are in good agreement with the values derived from X-ray diffraction data. Rotation function calculations in Patterson space showed a set of peaks for 2-fold, 3-fold and 5-fold local rotation axes, accurately consistent with icosahedral symmetry and with the particle orientation A shown in the Appendix. The crystal packing can be described as follows: enzyme particles with icosahedral symmetry (point group 532) are located at points 32 of the hexagonal cell, corresponding to positions (0, 0, 0) and (0, 0, 1/2) on the 6-fold screw axes. From the data reported, it may be concluded that the enzyme structure can be described as an icosahedral capsid of 60 beta-subunits with the triangulation number T = 1. The alpha-subunits are located in the central core space of the capsid, but their spatial orientation is incompletely understood.     

Influence of subterminal viral DNA nucleotides on differential susceptibility to cleavage by human immunodeficiency virus type 1 and visna virus integrases.

A comparison of the extents of site-specific cleavage of U5 and U3 viral DNA termini by the integrases of human immunodeficiency virus type 1 and visna virus guided the quantitative testing of oligonucleotide substrates containing specific base substitutions. The simultaneous exchange of positions 5 and 6 between U3 substrates switched the patterns of differential susceptibility to the two integrases. The activity of visna virus integrase was more dependent on the identity of position 5 adjacent to the invariant CA bases than on position 6, whereas human immunodeficiency virus type 1 integrase appeared to interact even more critically with position 6. Although the paired natural substrates of most lentiviral integrases match at positions 7 and 8, these bases were not important for susceptibility of U5 substrates. In fact, the final six U5 positions contained all of the sequence information necessary for susceptibility. These results suggest that constraints other than integration influence the terminal inverted repeats of retroviral DNA.     

Virion orientation in cubic crystals of the human common cold virus HRV14

A new cubic crystal form (a = 445.1 A) of space group P23 is reported for human rhinovirus R14. There are four particles per unit cell, each situated on a crystallographic 3-fold axis. The orientation of these particles has been determined with a rotation function and their approximate positions have been derived from a Patterson map. The crystals diffract to at least 2.8 A resolution. Limitations to the possible surface features of the virus are set by a comparison of the cubic and orthorhombic crystal forms.     

Crystal structure of the complementary quadruplex formed by d(GCATGCT) at atomic resolution

Here we report the crystal structure of the DNA heptanucleotide sequence d(GCATGCT) determined to a resolution of 1.1 Å. The sequence folds into a complementary loop structure generating several unusual base pairings and is stabilised through cobalt hexammine and highly defined water sites. The single stranded loop is bound together through the G(N2)–C(O2) intra-strand H-bonds for the available G/C residues, which form further Watson–Crick pairings to a complementary sequence, through 2-fold symmetry, generating a pair of non-planar quadruplexes at the heart of the structure. Further, four adenine residues stack in pairs at one end, H-bonding through their N7–N6 positions, and are additionally stabilised through two highly conserved water positions at the structural terminus. This conformation is achieved through the rotation of the central thymine base at the pinnacle of the loop structure, where it stacks with an adjacent thymine residue within the lattice. The crystal packing yields two halved biological units, each related across a 2-fold symmetry axis spanning a cobalt hexammine residue between them, which stabilises the quadruplex structure through H-bonds to the phosphate oxygens and localised hydration.     

DNA packaging orders the membrane of bacteriophage PRD1.

Bacteriophage PRD1 contains a linear dsDNA genome enclosed by a lipid membrane lying within a protein coat. Determination of the structure of the detergent-treated particle to 2 nm by cryo-electron microscopy and three-dimensional reconstruction has defined the position of the major coat protein P3. The coat contains 240 copies of trimeric P3 packed into positions of local 6-fold symmetry on a T = 25 lattice. The three-dimensional structures of the PRD1 virion and a DNA packaging mutant to a resolution of 2.8 nm have revealed specific interactions between the coat and the underlying membrane. The membrane is clearly visible as two leaflets separated by 2 nm and spanned by transmembrane density. The size of the coat does not change upon DNA packaging. Instead, the number of interactions seen between the protein shell and the membrane and the order of the membrane components increase. Thus the membrane of PRD1 plays a role in assembly which is akin to that played by the nucleocapsid in other membrane viruses.     

Three-dimensional arrangement of the cell wall protein of Sulfolobus acidocaldarius

The three-dimensional structure of the S-layer that surrounds the bacterium Sulfolobus acidocaldarius is described in detail. Pieces of the S-layer, which are two-dimensional crystals with p6 symmetry, have been studied by crystallographic analysis of electron micrographs of tilted specimens. In the density map, each asymmetric unit appears to consist of several domains connected by strong hinges. On the basis of the ragged appearance of the structure at torn edges, we now suggest that the single species of polypeptide is in a highly extended conformation, with much overlap between different molecules, and show how such molecules might be weaved together to produce the morphological domains. We show that the closed surface lattice of the intact cell wall contains 5-fold and 7-fold vertices and show how the subunit structure appears to be well suited to form 5-fold and 7-fold symmetric rings at these points in place of the 6-fold rings of the hexagonal lattice.     

Structure-function analysis of the bestrophin family of anion channels

The bestrophins are a newly described family of anion channels unrelated in primary sequence to any previously characterized channel proteins. The human genome codes for four bestrophins, each of which confers a distinctive plasma membrane conductance on transfected 293 cells. Extracellular treatment with methanethiosulfonate ethyltrimethylammonium (MTSET) of a series of substitution mutants that eliminate one or more cysteines from human bestrophin1 demonstrates that cysteine 69 is the single endogenous cysteine responsible for MTSET inhibition of whole-cell current. Cysteines introduced between positions 78-99 and 223-226 are also accessible to external MTSET, with MTSET modification at positions 79, 80, 83, and 90 producing a 2-6-fold increase in whole-cell current. The latter set of four cysteine-substitution mutants define a region that appears to mediate allosteric control of channel activity. Mapping of transmembrane topography by insertion of N-linked glycosylation sites and tobacco etch virus protease cleavage sites provides evidence for cytosolic N and C termini and an unexpected transmembrane topography with at least three extracellular loops that include positions 60-63, 212-227, and 261-267. These experiments provide the first structural analysis of the bestrophin channel family.     

Hydrogen/deuterium exchange analysis of HIV-1 capsid assembly and maturation

Following budding, HIV-1 virions undergo a maturation process where the Gag polyprotein in the immature virus is cleaved by the viral protease and rearranges to form the mature infectious virion. Despite the wealth of structures of isolated capsid domains and an in?vitro-assembled mature lattice, models of the immature lattice do not provide an unambiguous model of capsid-molecule orientation and no structural information is available for the capsid maturation pathway. Here we have applied hydrogen/deuterium exchange mass spectrometry to immature, mature, and mutant Gag particles (CA5) blocked at the final Gag cleavage event to examine the molecular basis of capsid assembly and maturation. Capsid packing arrangements were very similar for all virions, whereas immature and CA5 virions contained an additional intermolecular interaction at the hexameric, 3-fold axis. Additionally, the N-terminal β-hairpin was observed to form as a result of capsid-SP1 cleavage rather than driving maturation as previously postulated.     

X-ray analysis of the disk of tobacco mosaic virus protein. 3. A low resolution electron density map

The structure of the disk of tobacco mosaic virus protein at low resolution has been determined by X-ray crystal analysis. Signs for the three principal projections were found by isomorphous replacement, using a mercury derivative. The heavy-atom positions were located by interpretation of difference Patterson maps on the basis of the non-crystallographic 17-fold rotational symmetry of the disk, and of the packing of the disks determined in the preceding paper (Finch et al., 1974).The electron density in the corresponding three projections was computed to a resolution of 6 Å. From the projections in the [100] and [010] directions, which are at right-angles to the 17-fold rotation axis, a three-dimensional electron density map has been calculated making use of the non-crystallographic symmetry. The procedure is similar to the three-dimensional image reconstruction technique used in electron microscopy.The map indicates that the subunits in the two rings face the same way and, hence, that the disk is polar. There are differences between the subunits in the two rings at high radius, which are presumably a consequence of the pairing interaction responsible for stabilizing the two-layer polar structure. The map has been compared with a low-resolution map of the intact virus, and certain common features can be identified, notably the site of the nucleic acid.     

Three-Dimensional Structure of the Enveloped Bacteriophage Φ12: An Incomplete T?=?13 Lattice Is Superposed on an Enclosed T?=?1 Shell

Background

Bacteriophage φ12 is a member of the Cystoviridae, a unique group of lipid containing membrane enveloped bacteriophages that infect the bacterial plant pathogen Pseudomonas syringae pv. phaseolicola. The genomes of the virus species contain three double-stranded (dsRNA) segments, and the virus capsid itself is organized in multiple protein shells. The segmented dsRNA genome, the multi-layered arrangement of the capsid and the overall viral replication scheme make the Cystoviridae similar to the Reoviridae.

Methodology/Principal Findings

We present structural studies of cystovirus φ12 obtained using cryo-electron microscopy and image processing techniques. We have collected images of isolated φ12 virions and generated reconstructions of both the entire particles and the polymerase complex (PC). We find that in the nucleocapsid (NC), the φ12 P8 protein is organized on an incomplete T = 13 icosahedral lattice where the symmetry axes of the T = 13 layer and the enclosed T = 1 layer of the PC superpose. This is the same general protein-component organization found in φ6 NC''s but the detailed structure of the entire φ12 P8 layer is distinct from that found in the best classified cystovirus species φ6. In the reconstruction of the NC, the P8 layer includes protein density surrounding the hexamers of P4 that sit at the 5-fold vertices of the icosahedral lattice. We believe these novel features correspond to dimers of protein P7.

Conclusions/Significance

In conclusion, we have determined that the φ12 NC surface is composed of an incomplete T = 13 P8 layer forming a net-like configuration. The significance of this finding in regard to cystovirus assembly is that vacancies in the lattice could have the potential to accommodate additional viral proteins that are required for RNA packaging and synthesis.