Organization of Paramutagenicity in R-Stippled Maize

In heterozygotes, R-stippled (R-st) reduces the pigmenting potential of sensitive r alleles heritably (paramutation). R-st is comprised of four r genes arranged in direct orientation. Unequal crossing over within R-st generates deletion products retaining from one to three r genes. Paramutagenic strength decreased in parallel with copy number, both among internal and distal deletions. Single-gene R-st derivatives were nonparamutagenic. This was so whether or not the single gene retained the transposable element (I-R) responsible for seed spotting. Adding back r genes by intragenic recombination increased paramutagenicity in proportion to total gene number. Each member of a set of overlapping deletions retained moderately strong activity, showing that no single r gene or intragenic region is required for paramutagenicity. Proximal and distal loss R-st derivatives, each retaining two r genes, were less paramutagenic in trans than the corresponding four copy cis combination, indicating R-st's paramutagenic determinants function as a cis-interdependent unit in bringing about modification of a sensitive allele.     

Molecular analysis of paramutant plants of Antirrhinum majus and the involvement of transposable elements

Paramutation is observed when the Antirrhinum majus lines 44 and 53 are crossed. These two lines both have insertions at the nivea locus, which encodes chalcone synthase (chs). The allele niv-53 carries the transposable element Tam1 in the promoter region of the chs gene; niv-44 carries the element Tam2 within the gene. The Tam1 element has previously been extensively characterised. Here the Tam2 element is further characterised, and the arrangement of the nivea locus in paramutant plants is analysed. The complete sequence of Tam2, and that of a partial cDNA complementary to it, have been determined. The cDNA is probably transcribed from a different copy of Tam2 from that present at the nivea locus, and does not encode a functional protein. Genomic Southerns of F1 plants from the 53/44 cross show that no major rearrangements are consistently associated with paramutation at the nivea locus of A. majus. The isolation from a paramutant plant arising from a 53/44 cross of an allele (niv-4432) resulting from the excision of Tam2 is reported. The excision of Tam2 resulted in a 32 bp deletion of chs gene sequences. Plants homozygous for the new niv-4432 allele have white flowers and are still paramutagenic, demonstrating that Tam2 need not be present at the nivea locus for paramutation to occur. Different interactions between Tam1 and Tam2 are discussed, and a possible model for paramutation is presented.     

Population genetics models of transposable elements

The control of transposable element copy number is of considerable theoretical and empirical interest. Under simple models, copy numbers may increase without limit. Mechanisms that can prevent such an increase include those in which the effect of selection increases with copy number, those in which the rate of transposition decreases with copy number, and those where unlimited increase in copy number is prevented by the consequences of functional heterogeneity in the transposable element family. Finite population sizes may attenuate the power of natural selection to act on transposable element copy number in a number of ways that may be of particular importance in laboratory populations. First, a small host population size will create occasional periods in which the variance between individuals in copy number is diminished, and with it the power of natural selection, even when the expected variance is Poisson. Second, small population sizes will produce high-frequency transposable element sites, systematically reducing the variance in copy number. The consequences will be particularly profound when the selective damage of transposable elements follows from their heterozygosity, as when ectopic exchange limits copy number. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mu1-Related Transposable Elements of Maize Preferentially Insert into Low Copy Number DNA

The Mutator transposable element system of maize was originally identified through its induction of mutations at an exceptionally high frequency and at a wide variety of loci. The Mu1 subfamily of transposable elements within this system are responsible for the majority of Mutator-induced mutations. Mu 1-related elements were isolated from active Mutator plants and their flanking DNA was characterized. Sequence analyses revealed perfect nine base target duplications directly flanking the insert for 13 of the 14 elements studied. Hybridizational studies indicated that Mu1-like elements insert primarily into regions of the maize genome that are of low copy number. This preferential selection of low copy number DNA as targets for Mu element insertion was not directed by any specific secondary structure(s) that could be detected in this study, but the 9-bp target duplications exhibited a discernibly higher than random match with the consensus sequence 5'-G-T-T-G-G/C-A-G-G/A-G-3'.     

Transposable elements and the evolution of genome size in eukaryotes

It is generally accepted that the wide variation in genome size observed among eukaryotic species is more closely correlated with the amount of repetitive DNA than with the number of coding genes. Major types of repetitive DNA include transposable elements, satellite DNAs, simple sequences and tandem repeats, but reliable estimates of the relative contributions of these various types to total genome size have been hard to obtain. With the advent of genome sequencing, such information is starting to become available, but no firm conclusions can yet be made from the limited data currently available. Here, the ways in which transposable elements contribute both directly and indirectly to genome size variation are explored. Limited evidence is provided to support the existence of an approximately linear relationship between total transposable element DNA and genome size. Copy numbers per family are low and globally constrained in small genomes, but vary widely in large genomes. Thus, the partial release of transposable element copy number constraints appears to be a major characteristic of large genomes.     

Insertion mutagenesis and study of transposable elements using a new unstable virescent seedling allele for isolation of haploid petunia lines

The new unstable virescent seedling ( vis* ) allele of a petunia mutant, that has green leaves but white cotyledons with green revertant spots, was used to identify spontaneously occurring haploid petunia lines with active transposable elements. Endogenous transposons were trapped into the single petunia nitrate reductase structural gene ( nia ) using chlorate selection on haploid protoplasts. In two mutant lines, the dTph1 -like transposable element dTph1–3 was inserted at almost the same position but in opposite orientations in the first exon of the nia gene. In a third mutant, a different transposable element was integrated into the fourth exon. This element, called dTph4 , is 787 bp long and has 13 bp terminal inverted repeats of which 12 bp are identical to those of dTph1 . Insertion of dTph1–3 and dTph4 results in an 8 bp duplication of the target site, as already described for dTph1 . In contrast to dTph1 -like elements, dTph4 is present at low copy number in the petunia genome. This can facilitate its use for gene tagging in petunia. The dTph1–3 and dTph4 elements excise frequently, as transposon footprints were found in most of the insertion mutants. The data demonstrate that haploid petunia is an excellent system for gene tagging and for the study of transposable elements.     

Fitness Effects of Ty Transposition in Saccharomyces Cerevisiae

It has been suggested that the primary evolutionary role of transposable elements is negative and parasitic. Alternatively, the target specificity and gene regulatory capabilities of many transposable elements raise the possibility that transposable element-induced mutations are more likely to be adaptively favorable than other types of mutations. Populations of Saccharomyces cerevisiae containing large amounts of variation for Ty1 genomic insertions were constructed, and the effects of Ty1 copy number on two components of fitness, yield and growth rate were determined. Although mean stationary phase density decreased with increased Ty1 copy number, the variance and range increased. The distributions of stationary phase densities indicate that many Ty1 insertions have negative effects on fitness, but also that some may have positive effects. To test directly for adaptively favorable Ty1 insertions, populations containing large amounts of variability for Ty1 copy number were grown in continuous culture. After 98-112 generations the frequency of clones containing zero Ty1 elements had decreased to approximately 0.0, and specific Ty1-containing clone families had predominated. Considering that most of the genetic variation in the populations was due to Ty1 transposition, and that Ty1 insertions had, on average, a negative effect on fitness, we conclude that Ty1 transposition events were directly responsible for the production of adaptive mutations in the clones that predominated in the populations.     

CFTR intron 1 increases luciferase expression driven by CFTR 5'-flanking DNA in a yeast artificial chromosome

The DNA elements that account for the highly regulated expression of the cystic fibrosis transmembrane conductance regulator gene (CFTR) are poorly understood. The goal of this study was to assess the feasibility of using a yeast artificial chromosome (YAC)-based reporter gene construct to define these elements further. An approximately 350-kb YAC (y5'luc) was constructed by replacing CFTR with a luciferase reporter gene (luc). A second YAC (y5'lucI) was similarly constructed but included a putative positive regulatory element from CFTR intron 1. Stable Chinese hamster ovary (CHO-K1) cell clones were derived using each YAC to assess the role that luc copy number and the presence of intron 1 played in luc expression. The CHO-K1 clonal cell lines demonstrated a wide range of luciferase activity. On average, this activity was significantly higher in clones derived from y5'lucI. After correcting for luc copy number, the presence of intron 1 was still associated with an increase in luciferase activity (P < 0.05), despite the fact that luciferase activity did not correlate with luc copy number in y5'luc-derived clones (r = -0.12). In contrast, the luciferase activity correlated well with luc copy number in the clones derived from y5'luc (r = 0. 75). These data are consistent with a positive role for intron 1 in regulating CFTR expression, but suggest that copy number is not the only factor that determines expression levels, particularly when this element is present. This YAC-based reporter system will provide a unique strategy for further assessment of the cis-acting elements that control CFTR expression.     

Mechanisms regulating the copy numbers of six LTR retrotransposons in the genome of Drosophila melanogaster

There has been debate over the mechanisms that control the copy number of transposable elements in the genome of Drosophila melanogaster. Target sites in D. melanogaster populations are occupied at low frequencies, suggesting that there is some form of selection acting against transposable elements. Three main theories have been proposed to explain how selection acts against transposable elements: insertions of a copy of a transposable element are selected against; chromosomal rearrangements caused by ectopic exchange between element copies are selected against; or the process of transposition itself is selected against. The three theories give different predictions for the pattern of transposable element insertions in the chromosomes of D. melanogaster. We analysed the abundance of six LTR (long terminal repeat) retrotransposons on the X and fourth chromosomes of multiple strains of D. melanogaster, which we compare with the predictions of each theory. The data suggest that no one theory can account for the insertion patterns of all six retrotransposons. Comparing our results with earlier work using these transposable element families, we find a significant correlation between studies in the particular model of copy number regulation supported by the proportion of elements on the X for the different transposable element families. This suggests that different retrotransposon families are regulated by different mechanisms.     

Transposon dynamics and the breeding system

The selfish DNA hypothesis predicts that natural selection is responsible for preventing the unregulated build up of transposable elements in organismal genomes. Accordingly, between-species differences in the strength and effectiveness of selection against transposons should be important in driving the evolution of transposon activity and abundance. We used a modeling approach to investigate how the rate of self-fertilization influences the population dynamics of transposable elements. Contrasting effects of the breeding system were observed under selection based on transposon disruption of gene function versus selection based on element-mediated ectopic exchange. This suggests that the comparison of TE copy number in organisms with different breeding systems may provide a test of the relative importance of these forces in regulating transposon multiplication. The effects of breeding system also interacted with population size, particularly when there was no element excision. The strength and effectiveness of selection against transposons was reflected not only in their equilibrium abundance, but also in the per-site element frequency of individual insertions and the coefficient of variation in copy number. These results are discussed in relation to evidence on transposon abundance available from the literature, and suggestions for future data collection. With their immense variety of breeding systems,plants will be extremely important for comparative studies and for sorting out the forces influencing...variation. This revised version was published online in July 2006 with corrections to the Cover Date.     

New foldback transposable element TFB1 found in histone genes of the midge Chironomus thummi

A new Foldback transposable element (TFB1) has been found in the histone H1-H3 intergenic region in the midge Chironomus thummi thummi. TFB1 has long terminal inverted repeats, composed of short, degenerate subrepeats and is flanked by nine or ten base-pair "target site" duplications. TFB1 is present in at least two adjacent histone gene units in Ch. th. thummi, indicating a homogenization of histone gene repeats. The copy number and chromosomal distribution of TFB1 are different in the closely related subspecies Ch. th. thummi and Ch. th. piger. showing that amplification, elimination and transposition of TFB1 have occurred recently during evolution.     

A general method to isolate genes tagged by a high copy number transposable element

The Petunia hybrida line W138 contains more than 200 copies of the transposable element dTph1. In W138 progeny these elements give rise to new unstable mutations at high frequency. With the aim of isolating these mutated genes a method was developed to isolate dTph1 flanking sequences unique for mutant plants. This method is based on differential screening of cloned inverse polymerase chain reaction (IPCR) products originating from the mutated plant. It directly yields a probe for the mutated gene which can be used to screen pre-existing cDNA and genomic libraries. This method may be generally applicable to isolate genes tagged by other high copy number transposable elements, like Mutator (Mu) or Dissociation (Ds) in Zea mays.     

Tol1转座子研究进展

Tol1和Tol2是在青鳉基因组中发现的具有自主活性的DNA转座子,而Tol1转座子的自主活性是新近才发现的,因此对它的报道较少。较之Tol2,Tol1可以携带更大片段的DNA进行转座,且Tol1的转座不受转座酶"过量表达抑制"的影响。研究已证实,Tol1转座子在秀丽线虫、斑马鱼、爪蟾和人等多种生物中具有转座活性。因此,在动物转基因和基因功能研究等方面有重要的应用前景。从Tol1转座子的结构特征、转座机制和作为基因转移载体的优点,以及应用研究等方面进行了简要的综述。     

IS1-mediated intramolecular rearrangements: formation of excised transposon circles and replicative deletions.

A system is described which permits visualization and analysis of a number of molecular species associated with transposition activity of the bacterial insertion sequence, IS1, in vivo. The technique involves induction of an IS1 transposase gene carried by a plasmid which also includes an IS1-based transposable element. It is, in principle, applicable to the identification of transposition intermediates as well as unstable transposition products and those which are not detectable by genetic means. Thirteen novel molecular species were detected after 4 h of induction. Five major species were characterized, based on their behaviour as a function of time, on their hybridization patterns and on the nucleotide sequences of the transposon-backbone junctions. All result from intramolecular IS1 transposition events. The two reciprocal partner products of IS1-mediated deletions, the intramolecular equivalent of co-integrates generated by intermolecular transposition, have been identified. Both carry a single copy of the transposable element and present complementary distributions of deletion endpoints. These results establish, by direct physical means, that adjacent IS1-mediated deletions are accompanied by duplication of the element. A second type of molecule identified was an excised circular copy of the transposon, raising the possibility that IS1 is capable of following an intermolecular transposition pathway, via excised transposon circles, leading to direct insertion.     

Identification of a fully-functional hobo transposable element and its use for germ-line transformation of Drosophila.

The transposable element hobo can be mobilized to induce a variety of genetic abnormalities within the germ-line of Drosophila melanogaster. Strains containing hobos have 3.0 kb elements and numerous smaller derivatives of the element. By analogy with other transposable element systems, it is likely that only the 3.0 kb elements are capable of inducing hobo mobilization. Here, we report that a cloned 3.0 kb hobo, called HFL1, is able to mediate germ-line transformation and therefore is an autonomous (fully-functional) transposable element. Germ-line transformation was observed when HFL1 and a marked hobo element were co-injected into recipient embryos devoid of endogenous hobos. Integration did not occur in the absence of the 3.0 kb element. A single copy of the marked hobo transposon inserted at each site, and the target sites were widely distributed throughout the genome. Integration occurred at (or very near) the termini of hobo, without internal rearrangement of the hobo or marker gene sequences. The hobo transformation system will allow us to determine the structural and regulatory features of hobo responsible for its mobilization and will provide novel approaches for the molecular and genetic manipulation of the Drosophila genome.     

Isolation and molecular characterization of dTnp1, a mobile and defective transposable element of Nicotiana plumbaginifolia

By Northern blot analysis of nitrate reductase-deficient mutants of Nicotiana plumbaginifolia, we identified a mutant (mutant D65), obtained after -ray irradiation of protoplasts, which contained an insertion sequence in the nitrate reductase (NR) mRNA. This insertion sequence was localized by polymerase chain reaction (PCR) in the first exon of NR and was also shown to be present in the NR gene. The mutant gene contained a 565 by insertion sequence that exhibits the sequence characteristics of a transposable element, which was thus named dTnp1. The dTnp1 element has 14 by terminal inverted repeats and is flanked by an 8-bp target site duplication generated upon transposition. These inverted repeats have significant sequence homology with those of other transposable elements. Judging by its size and the absence of a long open reading frame, dTnp1 appears to represent a defective, although mobile, transposable element. The octamer motif TTTAGGCC was found several times in direct orientation near the 5 and 3 ends of dTnp1 together with a perfect palindrome located after the 5 inverted repeat. Southern blot analysis using an internal probe of dTnp1 suggested that this element occurs as a single copy in the genome of N. plumbaginifolia. It is also present in N. tabacum, but absent in tomato or petunia. The dTnp1 element is therefore of potential use for gene tagging in Nicotiana species.     

Spotting factor (Spf) from the Spotted-dilute system in maize is a member of the En/Spm controlling element family

The Spotted-dilute controlling element system in maize involves an autonomous Spotting factor (Spf), and a receptor at the r1 locus haplotype R1-r(spotted dilute2). Its relationship with other maize transposable element systems is poorly characterized. Through development of a genetic tester that carries receptors for both the Spotted-dilute and the En/Spm controlling element systems, we determined that both receptors respond equally to Spf and En/Spm and that Spf is therefore a member of the En/Spm family of controlling elements.     

水稻基因组上一个Ds切离及其双位点插入行为的分子鉴定

玉米转座元件Ac/Ds是hAT转座子家族的成员, 导入水稻基因组后具有转座活性, 尽管转座机制还不完全清楚, 但它们通常经保守的非复制型“剪切-粘贴”过程转座。研究表明, 在Ac编码的转座酶作用下, Ds从原位点切离后常优先重新插入到连锁位点。文章利用TAIL-PCR技术从水稻一个Ds插入突变体及其回复突变体中分离Ds侧翼序列, 结合生物信息学分析方法, 对Ds在突变体上插入位点、回复突变体内切离足迹和重新插入位点进行了分子鉴定。结果显示, 突变体中Ds从3号染色体切离后, 在原插入位点残留了8 bp足迹序列(CATCATGA), 引起Ds标记基因外显子和内含子数目增加, 从而影响基因结构。切离后的Ds重新插入回复突变体第2和第6号染色体上, 分别编码烟草胺氨基转移酶和衰老相关蛋白的2个基因的编码区。因此, 典型的“剪切-粘贴”机制不能完全解释Ds的转座行为, Ds转座存在“剪切-复制-粘贴”的特点。