Artificial intelligence based optimization of exocellular glucansucrase production from Leuconostoc dextranicum NRRL B-1146

Two different artificial intelligence techniques namely artificial neural network (ANN) and genetic algorithm (GA) were integrated for optimizing fermentation medium for the production of glucansucrase. The experimental data reported in a previous study were used to build the neural network. The ANN was trained using the back propagation algorithm. The ANN predicted values showed good agreement with the experimentally reported ones from a response surface based experiment. The concentrations of three medium components: viz Tween 80, sucrose and K(2)HPO(4) served as inputs to the neural network model and the enzyme activity as the output of the model. A model was generated with a coefficient of correlation (R(2)) of 1.0 for the training set and 0.90 for the test data. A genetic algorithm was used to optimize the input space of the neural network model to find the optimum settings for maximum enzyme activity. This artificial neural network supported genetic algorithm predicted a maximum glucansucrase activity of 6.92U/ml at medium composition of 0.54% (v/v) Tween 80, 5.98% (w/v) sucrose and 1.01% (w/v) K(2)HPO(4). ANN-GA predicted model gave a 6.0% increase of enzyme activity over the regression based prediction for optimized enzyme activity. The maximum enzyme activity experimentally obtained using the ANN-GA designed medium was 6.75+/-0.09U/ml which was in good agreement with the predicted value.     

Dose distribution correction for the influence of magnetic field using a deep convolutional neural network for online MR-guided adaptive radiotherapy

PurposeThis study aimed to develop a deep convolutional neural network (CNN)-based dose distribution conversion approach for the correction of the influence of a magnetic field for online MR-guided adaptive radiotherapy.MethodsOur model is based on DenseNet and consists of two 2D input channels and one 2D output channel. These three types of data comprise dose distributions without a magnetic field (uncorrected), electron density (ED) maps, and dose distributions with a magnetic field. These data were generated as follows: both types of dose distributions were created using 15-field IMRT in the same conditions except for the presence or absence of a magnetic field with the GPU Monte Carlo dose in Monaco version 5.4; ED maps were acquired with planning CT images using a clinical CT-to-ED table at our institution. Data for 50 prostate cancer patients were used; 30 patients were allocated for training, 10 for validation, and 10 for testing using 4-fold cross-validation based on rectum gas volume. The accuracy of the model was evaluated by comparing 2D gamma-indexes against the dose distributions in each irradiation field with a magnetic field (true).ResultsThe gamma indexes in the body for CNN-corrected uncorrected dose against the true dose were 94.95% ± 4.69% and 63.19% ± 3.63%, respectively. The gamma indexes with 2%/2-mm criteria were improved by 10% in most test cases (99.36%).ConclusionsOur results suggest that the CNN-based approach can be used to correct the dose-distribution influences with a magnetic field in prostate cancer treatment.     

Research on WNN Greenhouse Temperature Prediction Method Based on GA

Temperature in agricultural production has a direct impact on the growth of crops. The emergence of greenhouses has improved the impact of the original unpredictable changes in temperature, but the temperature modeling of greenhouses is still the main direction at present. Neural network modeling relies on sufficient actual data to model greenhouses, but there is a widening gap in the application of different neural networks. This paper proposes a greenhouse temperature prediction model based on wavelet neural network with genetic algorithm (GA-WNN). With the simple network structure and the nonlinear adaptability of the wavelet basis function, wavelet neural network (WNN) improved model training speed and accuracy of prediction results compared with back propagation neural networks (BPNN), which was conducive to the prediction and control of short-term greenhouse temperature fluctuations. At the same time, the genetic algorithm (GA) was introduced to globally optimize the initial weights of the original model, which improved the insensitivity of the model to the initial weights and thresholds, and improved the training speed and stability of the model. Finally, simulation results for the greenhouse showed that the model training speed, prediction results accuracy and model stability of the GA-WNN in the greenhouse were improved in comparison to results obtained by the WNN and BPNN in the greenhouse.     

Optimization of actinomycin V production by Streptomyces triostinicus using artificial neural network and genetic algorithm

Artificial neural network (ANN) and genetic algorithm (GA) were applied to optimize the medium components for the production of actinomycinV from a newly isolated strain of Streptomyces triostinicus which is not reported to produce this class of antibiotics. Experiments were conducted using the central composite design (CCD), and the data generated was used to build an artificial neural network model. The concentrations of five medium components (MgSO₄, NaCl, glucose, soybean meal and CaCO₃) served as inputs to the neural network model, and the antibiotic yield served as outputs of the model. Using the genetic algorithm, the input space of the neural network model was optimized to find out the optimum values for maximum antibiotic yield. Maximum antibiotic yield of 452.0 mg l⁻¹ was obtained at the GA-optimized concentrations of medium components (MgSO₄ 3.657; NaCl 1.9012; glucose 8.836; soybean meal 20.1976 and CaCO₃ 13.0842 gl⁻¹). The antibiotic yield obtained by the ANN/GA was 36.7% higher than the yield obtained with the response surface methodology (RSM).     

Saccade-related remapping of target representations between topographic maps: a neural network study

The goal of this study was to explore how a neural network could solve the updating task associated with the double-saccade paradigm, where two targets are flashed in succession and the subject must make saccades to the remembered locations of both targets. Because of the eye rotation of the saccade to the first target, the remembered retinal position of the second target must be updated if an accurate saccade to that target is to be made. We trained a three-layer, feed-forward neural network to solve this updating task using back-propagation. The network's inputs were the initial retinal position of the second target represented by a hill of activation in a 2D topographic array of units, as well as the initial eye orientation and the motor error of the saccade to the first target, each represented as 3D vectors in brainstem coordinates. The output of the network was the updated retinal position of the second target, also represented in a 2D topographic array of units. The network was trained to perform this updating using the full 3D geometry of eye rotations, and was able to produce the updated second-target position to within a 1 degrees RMS accuracy for a set of test points that included saccades of up to 70 degrees . Emergent properties in the network's hidden layer included sigmoidal receptive fields whose orientations formed distinct clusters, and predictive remapping similar to that seen in brain areas associated with saccade generation. Networks with the larger numbers of hidden-layer units developed two distinct types of units with different transformation properties: units that preferentially performed the linear remapping of vector subtraction, and units that performed the nonlinear elements of remapping that arise from initial eye orientation.     

Simulating the cortical 3D visuomotor transformation of reach depth

We effortlessly perform reach movements to objects in different directions and depths. However, how networks of cortical neurons compute reach depth from binocular visual inputs remains largely unknown. To bridge the gap between behavior and neurophysiology, we trained a feed-forward artificial neural network to uncover potential mechanisms that might underlie the 3D transformation of reach depth. Our physiologically-inspired 4-layer network receives distributed 3D visual inputs (1(st) layer) along with eye, head and vergence signals. The desired motor plan was coded in a population (3(rd) layer) that we read out (4(th) layer) using an optimal linear estimator. After training, our network was able to reproduce all known single-unit recording evidence on depth coding in the parietal cortex. Network analyses predict the presence of eye/head and vergence changes of depth tuning, pointing towards a gain-modulation mechanism of depth transformation. In addition, reach depth was computed directly from eye-centered (relative) visual distances, without explicit absolute depth coding. We suggest that these effects should be observable in parietal and pre-motor areas.     

Training back-propagation neural networks to define and detect DNA-binding sites

A three layered back-propagation neural network was trained to recognize E. coli promoters of the 17 base spacing class. To this end, the network was presented with 39 promoter sequences and derivatives of those sequences as positive inputs; 60% A + T random sequences and sequences containing 2 promoter-down point mutations were used as negative inputs. The entire promoter sequence of 58 bases, approximately -50 to +8, was entered as input. The network was asked to associate an output of 1.0 with promoter sequence input and 0.0 with non-promoter input. Generally, after 100,000 input cycles, the network was virtually perfect in classifying the training set. A trained network was about 80% effective in recognizing 'new' promoters which were not in the training set, with a false positive rate below 0.1%. Network searches on pBR322 and on the lambda genome were also performed. Overall the results were somewhat better than the best rule-based procedures. The trained network can be analyzed both for its choice of base and relative weighting, positive and negative, at each position of the sequence. This method, which requires only appropriate input/output training pairs, can be used to define and search for any DNA regulatory sequence for which there are sufficient exemplars.     

Dynamic output feedback stabilization for nonlinear systems based on standard neural network models

A neural-model-based control design for some nonlinear systems is addressed. The design approach is to approximate the nonlinear systems with neural networks of which the activation functions satisfy the sector conditions. A novel neural network model termed standard neural network model (SNNM) is advanced for describing this class of approximating neural networks. Full-order dynamic output feedback control laws are then designed for the SNNMs with inputs and outputs to stabilize the closed-loop systems. The control design equations are shown to be a set of linear matrix inequalities (LMIs) which can be easily solved by various convex optimization algorithms to determine the control signals. It is shown that most neural-network-based nonlinear systems can be transformed into input-output SNNMs to be stabilization synthesized in a unified way. Finally, some application examples are presented to illustrate the control design procedures.     

Improved Neural Networks with Random Weights for Short-Term Load Forecasting

An effective forecasting model for short-term load plays a significant role in promoting the management efficiency of an electric power system. This paper proposes a new forecasting model based on the improved neural networks with random weights (INNRW). The key is to introduce a weighting technique to the inputs of the model and use a novel neural network to forecast the daily maximum load. Eight factors are selected as the inputs. A mutual information weighting algorithm is then used to allocate different weights to the inputs. The neural networks with random weights and kernels (KNNRW) is applied to approximate the nonlinear function between the selected inputs and the daily maximum load due to the fast learning speed and good generalization performance. In the application of the daily load in Dalian, the result of the proposed INNRW is compared with several previously developed forecasting models. The simulation experiment shows that the proposed model performs the best overall in short-term load forecasting.     

An ANN-GA model based promoter prediction in Arabidopsis thaliana using tilling microarray data

Identification of promoter region is an important part of gene annotation. Identification of promoters in eukaryotes is important as promoters modulate various metabolic functions and cellular stress responses. In this work, a novel approach utilizing intensity values of tilling microarray data for a model eukaryotic plant Arabidopsis thaliana, was used to specify promoter region from non-promoter region. A feed-forward back propagation neural network model supported by genetic algorithm was employed to predict the class of data with a window size of 41. A dataset comprising of 2992 data vectors representing both promoter and non-promoter regions, chosen randomly from probe intensity vectors for whole genome of Arabidopsis thaliana generated through tilling microarray technique was used. The classifier model shows prediction accuracy of 69.73% and 65.36% on training and validation sets, respectively. Further, a concept of distance based class membership was used to validate reliability of classifier, which showed promising results. The study shows the usability of micro-array probe intensities to predict the promoter regions in eukaryotic genomes.     

A new training algorithm using artificial neural networks to classify gender-specific dynamic gait patterns

The aim of this study was to present a new training algorithm using artificial neural networks called multi-objective least absolute shrinkage and selection operator (MOBJ-LASSO) applied to the classification of dynamic gait patterns. The movement pattern is identified by 20 characteristics from the three components of the ground reaction force which are used as input information for the neural networks in gender-specific gait classification. The classification performance between MOBJ-LASSO (97.4%) and multi-objective algorithm (MOBJ) (97.1%) is similar, but the MOBJ-LASSO algorithm achieved more improved results than the MOBJ because it is able to eliminate the inputs and automatically select the parameters of the neural network. Thus, it is an effective tool for data mining using neural networks. From 20 inputs used for training, MOBJ-LASSO selected the first and second peaks of the vertical force and the force peak in the antero-posterior direction as the variables that classify the gait patterns of the different genders.     

CNN universal machine as classificaton platform: an art-like clustering algorithm

Fast and robust classification of feature vectors is a crucial task in a number of real-time systems. A cellular neural/nonlinear network universal machine (CNN-UM) can be very efficient as a feature detector. The next step is to post-process the results for object recognition. This paper shows how a robust classification scheme based on adaptive resonance theory (ART) can be mapped to the CNN-UM. Moreover, this mapping is general enough to include different types of feed-forward neural networks. The designed analogic CNN algorithm is capable of classifying the extracted feature vectors keeping the advantages of the ART networks, such as robust, plastic and fault-tolerant behaviors. An analogic algorithm is presented for unsupervised classification with tunable sensitivity and automatic new class creation. The algorithm is extended for supervised classification. The presented binary feature vector classification is implemented on the existing standard CNN-UM chips for fast classification. The experimental evaluation shows promising performance after 100% accuracy on the training set.