Physicochemical behavior of homogeneous series of acetylated chitosans in aqueous solution: role of various structural parameters

Physicochemical properties of four different homogeneous series of chitosans with degrees of acetylation (DA) and weight-average degrees of polymerization (DP(w)) ranging from 0 to 70% and 650 to 2600, respectively, were characterized in an ammonium acetate buffer (pH 4.5). Then, the intrinsic viscosity ([eta](0)), the root-mean-square z-average of the gyration radius (R(G,z)), and the second virial coefficient (A(2)) were studied by viscometry and static light scattering. The conformation of chitosan, according to DA and DP(w), was highlighted through the variations of alpha and nu parameters, deduced from the scale laws [eta](0) = K(w)and R(G,z) = K', respectively, and the total persistence length (L(p,tot)). In relation with the different behaviors of chitosan in solution, the conformation varied according to two distinct domains versus DA with a transition range in between. Then, (i) for DA < 25%, chitosan exhibited a flexible conformation; (ii) a transition domain for 25 < DA < 50%, where the chitosan conformation became slightly stiffer and, (iii) for DA > 50%, on increasing DP(w) and DA, the participation of the excluded volume effect became preponderant and counterbalanced the depletion of the chains by steric effects and long-distance interactions. It was also highlighted that below and beyond a critical DP(w,c) (ranging from 1 300 to 1 800 for DAs from 70 to 0%, respectively) the flexibility of chitosan chains markedly increased then decreased (for DA > 50%) or became more or less constant (DA < 50%). All the conformations of chitosan with regards to DA and DP(w) were described in terms of short-distance interactions and excluded volume effect.     

Proteinase inhibitor synthesis in tomato leaves : induction by chitosan oligomers and chemically modified chitosan and chitin

Soluble chemical derivatives of chitin and chitosan including ethylene glycol chitin, nitrous acid-modified chitosan, glycol chitosan, and chitosan oligomers, produced from chitosan by limited hydrolysis with HCl, were found to possess proteinase inhibitor inducing activities when supplied to young excised tomato (Lycopersicon esculentum var Bonnie Best) plants. Nitrous acid-modified chitosans and ethylene glycol chitin exhibited about 2 to 3 times the activity of acid hydrolyzed chitosan and 15 times more activity than glycol chitosan. The parent chitin and chitosans are insoluble in water or neutral buffers and cannot be assayed. Glucosamine and its oligomers from degree of polymerization = 2 through degree of polymerization = 6 were purified from acid-fragmented chitosan and assayed. The monomer was inactive and dimer and trimer exhibited weak activities. Tetramer possessed higher activity and the larger pentamer and hexamer oligomers were nearly as active as the total hydrolyzed mixture. None of the fragments exhibited more than 2% acetylation (the limits of detection). The contents of the acid-fragmented mixture of oligomers was chemically N-acetylated to levels of 13% and 20% and assayed. The N-acetylation neither inhibited nor enhanced the proteinase inhibitor inducing activity of the mixture. These results, along with recent findings by others that chitinases and chitosanases are present in plants, provide further evidence for a possible role of soluble chitosan fragments as signals to activate plant defense responses.     

Effects of N-acetylation degree on N-acetylated chitosan hydrolysis with commercially available and modified pectinases

Three types of N-acetylated chitosans (NACs) with different degrees of acetylation (DA) were prepared and used as a substrate for enzymatic hydrolysis with a commercially available pectinase and a modified one. Pectinase modification was conducted using polyalkyleneoxide-maleic anhydride copolymer (PEO-MA copolymer). The effects of DA on enzymatic reaction with native and modified pectinases were investigated experimentally. Initial hydrolysis rate and Michaelis-Menten kinetic parameters were measured by analysis of reducing sugars. DA of NAC strongly affected the hydrolytic characteristics of native and modified pectinases. N-acetylation of chitosan increased the initial hydrolysis rate and the enzyme-substrate affinity with respect to both pectinases: NACs with DA over 0.3 showed high initial hydrolysis rate and strong affinity between enzyme and substrate. Especially, when NAC with DA over 0.3 was treated with modified pectinase, the affinity became much stronger than the native pectinase.     

Kinetics of hydrolysis of chitin/chitosan oligomers in concentrated hydrochloric acid

The kinetics of hydrolysis in concentrated hydrochloric acid (12.07 M) of the fully N-acetylated chitin tetramer (GlcNAc(4)) and the fully N-deacetylated chitosan tetramer (GlcN(4)) were followed by determining the amounts of the lower DP oligomers as a function of time. A theoretical model was developed to simulate the kinetics of hydrolysis of the three different glycosidic linkages in the tetramers. The model uses two different rate constants for the hydrolysis of the glycosidic bonds in the oligomers, assuming that the glycosidic bond next to one of the end residues are hydrolysed faster than the two other glycosidic linkages. The two rate constants were estimated by fitting model data to experimental results. The results show that the hydrolysis of the tetramers is a nonrandom process as the glycosidic bonds next to one of the end residues are hydrolysed 2.5 and 2.0 times faster as compared to the other glycosidic linkages in the fully N-acetylated and fully N-deacetylated tetramer, respectively. From previous results on other oligomers and the reaction mechanism, it is likely that the glycosidic bond that is hydrolysed fastest is the one next to the nonreducing end. The absolute values for the rate constants for the hydrolysis of the glycosidic linkages in GlcNAc(4) were found to be 50 times higher as compared to the glycosidic linkages in GlcN(4), due to the catalytic role of the N-acetyl group and the presence of the positively charged amino-group on the N-deacetylated sugar residue.     

Purification and characterization of chitosanase and Exo-beta-D-glucosaminidase from a Koji mold, Aspergillus oryzae IAM2660

Chitosan-degrading activity was detected in the culture fluid of Aspergillus oryzae, A. sojae, and A. flavus among various fungal strains belonging to the genus Aspergillus. One of the strong producers, A. oryzae IAM2660 had a higher level of chitosanolytic activity when N-acetylglucosamine (GlcNAc) was used as a carbon source. Two chitosanolytic enzymes, 40 kDa and 135 kDa in molecular masses, were purified from the culture fluid of A. oryzae IAM2660. Viscosimetric assay and an analysis of reaction products by thin-layer chromatography clearly indicated the endo- and exo-type cleavage manner for the 40-kDa and 135-kDa enzymes, respectively. The 40-kDa enzyme, designated chitosanase, catalyzed a hydrolysis of glucosamine (GlcN) oligomers larger than pentamer, glycol chitosan, and chitosan with a low degree of acetylation (0-30%). The 135-kDa exo-beta-D-glucosaminidase,enzyme,named released a single GlcN residue from the GlcN oligomers and chitosan, but did not release GlcNAc residues from either GlcNAc oligomer or colloidal chitin.     

Effect of chitin sources on production of chitinase and chitosanase byStreptomyces griseus HUT 6037

The advantage of usingStreptomyces griseus HUT 6037 in the production of chitinase or chitosanase is that the organism is capable of hydrolyzing amorphous or crystal-line chitin and chitosan according to the type of the substrate used. We investigated the effects of the enzyme induction time and chitin sources, CM-chitosan and deacetylated chitosan (degree of deacetylation 75–99%), on production of chitosanase. We found that this strain accumulated chitosanase when cells were grown in the culture medium containing chitosanaceous substrates instead of chitinaceous substrates. The highest chitosanase activity was obtained at 4 days of cultivation with 99% deacetylated chitosan. Soluble chitosan (53% deacetylated chitosan) was found to induce chitinase as well as chitosanase. The specific activities of chitinase and chitosanase were 0.91 and 1.33 U/mg protein at 3 and 5 days, respectively. From the study of the enzymatic digestibility of various degrees of deacetylated chitosan, it was found that (GlcN)₃, (GlcN)₄ and (GlcN)₅ were produced during the enzymatic hydrolysis reaction. The results of this study suggested that the sugar composition of (GlcN)₃ was homogeneous and those of (GlcN)₄ and (GlcN)₅ were heterogeneous.     

Chitin gels

Chitin dissolved in N,N-dimethylacetamide, N-methyl-2-pyrrolidone and their mixed solvents in the presence of 5% LiCl was treated with acetic anhydride-pyridine, and the mixture solution was heated at 100 degrees C for 6 h to give a partially O-acetylated chitin gel. Chitin dissolved in these solvents in the presence of 5% LiCl was mixed with pyridine, and the mixture solution was heated at 60 degrees C for 5 h to give a chitin gel. Both the gels were rigid and transparent, and their properties and the rate of the hydrolysis of the chitin xerogel by hen-egg white lysozyme were essentially similar to those of N-acetylchitosan gel prepared by chemical N-acetylation of chitosan.     

Sequence analysis of chitooligosaccharides by matrix-assisted laser desorption ionization postsource decay mass spectrometry

Chitin/chitosan oligosaccharides composed of 2-acetamido-2-deoxy-D-glucopyranose (GlcNAc) and/or 2-amino-2-deoxy-D-glucopyranose (GlcN) were prepared by chemical degradation of chitin or chitosan and separated by gel permeation chromatography. Oligosaccharides obtained after enzymatic hydrolysis of chitosan [F(A) 0.19] with a fungal chitinase were derivatized by reductive amination with 2-aminoacridone and sequenced by matrix-assisted laser desorption ionization time-of-flight postsource decay (PSD) mass spectrometry (MS). The sequence of a trimer, D1A2, was established as D-A-A. The composition of a hexamer D3A3 was ca. 65% D-A-D-D-A-A and 35% D-D-A-D-A-A. The PSD MS of a nonamer D5A4-amac revealed four isobaric species D-X-Y-D-X-Y-D-A-A, where A is GlcNAc, D is GlcN, and X and Y (X not equal Y) are mutually either D or A. This structure motif was also observed in a dodecamer D7A5 which was composed of eight isobaric sequences of the general formula (D-X-Y)(3)-D-A-A.     

Purification and characterization of exo-beta-D-glucosaminidase from Aspergillus fumigatus S-26

An extracellular 104 kDa exo-beta-d-glucosaminidase was purified and characterized from the culture supernatant of Aspergillus fumigatus S-26, which showed exceptionally strong chitosanolytic enzyme activity. The purified enzyme showed optimum pH of 3.0-6.0 and optimum temperature of 50-60 degrees C, and was stable between pH 2.0 and 10.0 and under 35 degrees C. The Km, Vmax, and kcat were determined to be 1.0 mg chitosan/ml, 7.8x10(-8) mol/s/mg protein, and 28.3 s-1, respectively. The exo-beta-D-glucosaminidase was severely inactivated by Cu2+ and Hg2+ at 10 mM. 2-Hydroxy-5-nitrobenzyl bromide, N-bromosuccinimide, and p-chloromercuribenzoic acid inhibited the enzyme. The enzyme did not degrade chitin, cellulose, and starch. The exo-beta-D-glucosaminidase did not reduce the viscosity of chitosan solutions at early stage of reaction, suggesting the exo-type of cleavage in polymeric chitosan chains. The exo-beta-D-glucosaminidase liberated only GlcN from chitosan, and GlcN plus the one-residue shortened oligomers from (GlcN)2-7. The exo-beta-D-glucosaminidase exhibited transglycosylation activity, resulting in the one-residue elongated oligomers.     

Fractionation, solid-phase immobilization and chemical degradation of long pectin oligogalacturonides. Initial steps towards sequencing of oligosaccharides

This work presents the optimized separation of pectin oligomers, their analysis by matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS), their subsequent immobilization to supports, and our initial steps towards solid-support assisted sequencing. The ambient pressure strong anion-exchange resin Source 15Q combined with ammonium formate buffer (AF) was used for the separation of unsaturated and saturated pectic oligogalacturonides (OGAs) derived from enzymatic digestion of pectin. Routinely, multi-milligram quantities of defined sizes OGAs with DPs from 5 to 19 were produced in excellent purity (>95%). Elution of OGAs followed by direct analysis of the peak fractions by MALDI-TOF MS. Purified OGAs (DP 5-7) were chemoselectively immobilized onto aminooxy-terminated polyethylene glycol polyacrylamide (PEGA) supports. Solid-phase anchoring took place at the reducing end of the oligosaccharide and resulted in the formation of an oxime linkage. The very high coupling yields confirmed the general suitability of aminooxy-PEGA resins for the immobilization of OGAs of different lengths. The OGA-functionalized PEGA supports were subsequently treated with aq TFA at 40 or 60 degrees C, and the chemical degradation products released from the support were analyzed by ESIMS. In all cases, the original OGA was degraded into smaller oligomers of various sizes down to the monomer. This work illustrates some of the basic principles underlying a strategy ultimately aimed at solid-support assisted sequencing of oligosaccharides.     

Characterization and kinetics of 45 kDa chitosanase from Bacillus sp. P16

An extracellular 45 kDa endochitosanase was purified and characterized from the culture supernatant of Bacillus sp. P16. The purified enzyme showed an optimum pH of 5.5 and optimum temperature of 60 degrees C, and was stable between pH 4.5-10.0 and under 50 degrees C. The Km and Vmax were measured with a chitosan of a D.A. of 20.2% as 0.52 mg/ml and 7.71 x 10(-6) mol/sec/mg protein, respectively. The enzyme did not degrade chitin, cellulose, or starch. The chitosanase digested partially N-acetylated chitosans, with maximum activity for 15-30% and lesser activity for 0-15% acetylated chitosan. The chitosanase rapidly reduced the viscosity of chitosan solutions at a very early stage of reaction, suggesting the endotype of cleavage in polymeric chitosan chains. The chitosanase hydrolyzed (GlcN)7 in an endo-splitting manner producing a mixture of (GlcN)(2-5). Time course studies showed a decrease in the rate of substrate degradation from (GlcN)7 to (GlcN)6 to (GlcN)5, as indicated by the apparent first order rate constants, k1 values, of 4.98 x 10(-4), 2.3 x 10(-4), and 9.3 x 10(-6) sec(-1), respectively. The enzyme hardly catalyzed degradation of chitooligomers smaller than the pentamer.     

Isolation and characterisation of procyanidins from Rumex obtusifolius

An acetone:water (7:3) extract obtained from the leaves of Rumex obtusifolius was fractionated into procyanidin oligomer and polymer fractions using a linear gradient and a simple step method on Sephadex LH-20. The chemical characteristics of the procyanidin fractions were studied by 13C-NMR spectroscopy, acid-catalysed degradation in the presence of benzyl mercaptan, matrix-assisted laser desorption/ionisation time-of-flight (MALDI-TOF) MS and electrospray ionisation (ESI) MS. The 13C-NMR showed that the polymer fraction consisted predominantly of procyanidin polymers, some with galloyl groups attached. The thiolysis reaction products indicated a mean degree of polymerisation (DP) of 4.3 for the step method, and a range of 2.3-8.2 mean DP for the gradient fractionation, with epicatechin as the most abundant flavan-3-ol extension unit, while the terminal units consisted of equal proportions of catechin, epicatechin and epicatechin gallate. Singly charged ions observed in MALDI-TOF/MS showed a range of oligomeric procyanidins and their polygalloyl derivatives. These species (in the range DP 2-7) were also observed by ESI/MS but the spectra were more complex due to overlapping multiply charged ions. Isolation of oligomers from the Sephadex LH-20 fraction by chromatography on polyamide and C18 yielded B1, B2, B3 and B7 dimers, an A-type trimer and a B2 3,3'-O-digallate.     

Purification and Characterization of Chitosanase and Exo-β-D-Glucosaminidase from a Koji Mold,Aspergillus oryzae IAM2660

Chitosan-degrading activity was detected in the culture fluid of Aspergillus oryzae, A. sojae, and A. flavus among various fungal strains belonging to the genus Aspergillus. One of the strong producers, A. oryzae IAM2660 had a higher level of chitosanolytic activity when N-acetylglucosamine (GlcNAc) was used as a carbon source. Two chitosanolytic enzymes, 40 kDa and 135 kDa in molecular masses, were purified from the culture fluid of A. oryzae IAM2660. Viscosimetric assay and an analysis of reaction products by thin-layer chromatography clearly indicated the endo- and exo-type cleavage manner for the 40-kDa and 135-kDa enzymes, respectively. The 40-kDa enzyme, designated chitosanase, catalyzed a hydrolysis of glucosamine (GlcN) oligomers larger than pentamer, glycol chitosan, and chitosan with a low degree of acetylation (0-30%). The 135-kDa enzyme, named exo-β-D-glucosaminidase, released a single GlcN residue from the GlcN oligomers and chitosan, but did not release GlcNAc residues from either GlcNAc oligomer or colloidal chitin.     

Action pattern of Bacillus sp. no. 7-M chitosanase on partially N-acetylated chitosan.

The hydrolyzate of partially N-acetylated chitosan by Bacillus sp. No. 7-M chitosanase was separated by gel filtration on Bio-Gel P-2. Sugar compositions and sequences of the oligosaccharides were identified by exo-splitting with beta-GlcNase, fast atom bombardment mass spectroscopy, and proton NMR spectroscopy. In addition to chitooligosaccharides, (GlcN)2, (GlcN)3, and (GlcN)4, hetero-chitooligosaccharides such as (GlcN)2.GlcNAc.(GlcN)2, GlcN.GlcNAc.(GlcN)3, (GlcN)2.GlcNAc.(GlcN)3, and GlcN.GlcNAc.(GlcN)4 were detected. These results indicate that Bacillus sp. No. 7-M chitosanase is absolutely specific toward the GlcN.GlcN bonds in partially N-acetylated chitosan and at least three GlcN residues were necessary to the hydrolysis of chitosan by chitosanase.     

Preparation of low-molecular-weight chitosan using phosphoric acid

Two types of low degree of polymerisation (DP) chitosan were prepared by homogeneous hydrolysis of chitosan in 85% phosphoric acid at room temperature for 1–6 weeks. The hydrolysates were collected by addition of excess ethanol, and were fractionated by solubility in water. The changes in yields of water-insoluble (higher DP) and water-soluble (lower DP) fractions were determined as a function of hydrolysis time. The hydrolysis proceeded with further deacetylation of chitosan, resulting in degree of deacetylation of more than 90%. The water-insoluble fraction prepared after the hydrolysis for 4 weeks (43% yield) had a weight-average DP ( ) of 16·8, and showed the ‘tendon’ type X-ray diffraction pattern. The water-soluble fraction (12·5% yield) had a of 7·3, and showed the ‘annealed’ type pattern.     

Comparative analysis of the effects of chitosan and common plant growth regulators on <Emphasis Type="Italic">in vitro</Emphasis> propagation of <Emphasis Type="Italic">Ipomoea purpurea</Emphasis> (L.) Roth from nodal explants

This study aimed to evaluate the effects of partially N-acetylated chitosans with a degree of acetylation (DA) of 10% on in vitro propagation of an ornamental plant, Ipomoea purpurea, by emphasizing the importance of the degree of polymerization (DP) on in vitro plant development. The effects of either a chitosan oligomer mixture with a DP between 2 and 15 (5.0, 10.0, and 20.0 mg L^?1) or chitosan polymer with a DP of 70 were compared with commonly used cytokinins [6-benzylaminopurine (BAP) and kinetin (KIN) at 0.5, 1.0, 2.0, and 4.0 mg L^?1] and auxins [indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA) at 0.25, 0.5, 1.0, and 2.0 mg L^?1]. The nodal explants used in this study were taken from donor plants obtained by germination of the seeds. The results indicated that all chitosan treatments had positive effects on the shoot induction, but only the oligomer mixture at 5 mg L^?1 gave the best results for mean shoot number, shoot length, and leaf number, compared to the other treatments and control. Also, all chitosan treatments increased mean number of roots and triggered adventitious root induction. However, root elongation was decreased in the presence of chitosan in the medium. The root elongation-inhibitory effects of chitosan become clearer in the presence of oligomer mixture. In general, chitosan had similar effects with tested cytokinins rather than auxins. The results of this study suggested that the application of chitosan oligomers—rather than polymers—can be an eco-friendly and effective alternative to synthetic cytokinins in horticulture.     

Chitooligosaccharides--preparation with the aid of pectinase isozyme from Aspergillus niger and their antibacterial activity

An isozyme of pectinase from Aspergillus niger with polygalacturonase activity caused chitosanolysis at pH 3.5, resulting in low-molecular weight chitosan (86%), chitooligosaccharides (COs, 4.8%) and monomers (2.2%). HPLC showed the presence of COs with DP ranging from 2 to 6. Charcoal-Celite chromatography and re-N-acetylation of the COs followed by CD, IR, MALDI-TOF-MS and FAB-MS analyses revealed an abundance of chitobiose, chitotriose and chitotetraose. The COs-monomeric mixture showed a bactericidal effect towards Bacillus cereus and Escherichia coli more efficiently than native chitosan. Among the chitooligomers, the hexamer showed maximum antibacterial effect followed by the penta-, tetra-, tri- and dimers. Of the two monomers, only GlcN showed slight bacterial growth inhibition. SEM revealed bactericidal action patterns of COs-monomeric mixture towards B. cereus and E. coli.     

Hemicellulose fine structure is affected differently during ripening of tomato lines with contrasted texture

The impact of genetic and fruit ripening on hemicelluloses fine structure was studied in twelve near isogenic lines of tomato fruits harboring firmness QTL. The sugar composition and the MALDI-TOF MS oligosaccharides profile after glucanase hydrolysis of the cell walls were determined from all green and red fruits pericarp tissue. MS profiles showed two major series of oligomers attributed to xyloglucan (XG) and glucomannan (GM) with minor peaks for xylan and ions attributed to galacto-oligomers. The oligosaccharides MS intensity varied significantly with the fruit genetic and ripening status. Correlations between MS intensity indicated structural regulations of both XG and GM structures with genetics and ripening. These results point to a region on the tomato chromosome 9 controlling cell wall galactose metabolism.     

Synthesis of a chitosan tetramer derivative, beta-D-GlcNAc-(1-->4)-beta-D-GlcNAc-(1-->4)-beta-D-GlcNAc-(1-->4)-D-Glc N through a partial N-acetylation reaction by chitin deacetylase

We have synthesized beta-D-GlcNAc-(1-->4)-beta-D-GlcNAc-(1-->4)-beta-D-GlcNAc-(1-->4)-D-GlcN (2) through a partial N-acetylation reaction of chitosan tetramer 1 by a chitin deacetylase from Colletotrichum lindemuthianum ATCC 56676. The compound was purified from the mixture of acetylation products of 1 using cation-exchange column chromatography and amine-adsorption column chromatography, and its structure was estimated by 1H NMR and FABMS analyses. The enzymatic reaction allows a regioselectivity that is hard to achieve by chemical N-acetylation.     

Structural studies of the glucuronic acid oligomers produced by Gluconacetobacter hansenii strain

Gluconacetobacter hansenii PJK, a cellulose producing bacterium recently isolated from the rotten apples, produced fair amounts of the water-soluble polysaccharides (WSPS). WSPS were studied for their monosaccharides composition after acid hydrolysis, which revealed that the hydrolysates consist only of one sugar, glucuronic acid. The structure of the WSPS was investigated using various spectroscopic techniques including FT-IR, MALDI-TOF MS and ¹H, and ¹³C NMR. These studies revealed that the product is a mixture of oligomers with the -glucuronic acid as building blocks. The possible structure of the major oligosaccharide in the mixture has been deduced.