Methane production using whole and screened dairy manure in conventional and fixed-film reactors

The technical feasibility of adopting the fixed-film reactor concept for biogas production from screened dairy manure was investigated. The methane production capability of laboratory-scale 4-L anaerobic reactors (conventional and fixed-film) receiving screened dairy manure and operated at 35 degrees C was compared. Dairy manure filtrate with 4.4% total solids (TS) and 3.4% volatile solids (VS) (average value) was prepared from 1:1 manure-water slurry. The feed material was added intermittently at loading rates ranging from 2.34 to 25 and 2.25 to 785 g VS/L d, respectively, for the conventional and fixed-film reactors. Maximum methane production rate (L CH(4)/L d) for the conventional reactor was 0.63 L CH(4)/L d achieved at a 6-day hydraulic retention time (HRT). For the fixed-film reactor the maximum production rate was 3.53 L CH(4)/L d when operated at a loading rate of 262 g VS/L d (3 h HRT). The fixed-film reactor was capable of sustaining a loading of 785 g VS/L d (1 h HRT). The fixed-film reactor performed much better than the conventional reactors. These results indicate that a large reduction of required reactor volume is possible through application of a fixed-film concept combined with a liquid-solid separation pretreatment of dairy manure.     

Penicillin acylase production by E. coli

Enzyme production with E. coli ATCC 11105, in a complex medium using phenylacetic acid as inducer is carried out in a stirred-tank reactor of 10 dm³ and an airlift tower-loop reactor of 60 dm³ with outer loop at a temperature of 27 °C. The optimum inducer concentration was 0.8 kg/m³, which was kept constant by fed-batch operation. The optimum of the relative dissolved O₂-concentration with regard to saturation is below 10% in a stirred-tank reactor and at 35% in a tower-loop reactor. It was kept constant by parameter-adaptive control of the aeration rate. In a stirred-tank enzyme productivity is slightly higher than in a tower-loop reactor, and much higher than in a bubble column reactor.List of Symbols CPR kg/(m³ h) CO₂-production rate - OTR kg/(m³ h) O₂-transfer rate - OUR kg/(m³ h) O₂-utilization rate - PAA phenylacetic acid (inducer) - RQ = CPR/OUR respiratory quotient - X kg/m³ cell mass concentration - _m h^–1 maximum specific growth rate     

Fed-batch culture of hybridoma cells: comparison of optimal control approach and closed loop strategies

Control of fed-batch culture of hybridoma cells was investigated based on two approaches optimal control theory and feedback control. Experiments were conducted for both approaches-with a feed enriched in glutamine. The optimal feed trajectory, a decreasing one, yielded a final monoclonal antibody (MAb) concentration of 170 mg/l, a three-fold increase compared to a typical batch operation.The feedback strategy relied on the on-line estimation of the net specific growth rate of cells from the measurement of the CO₂ production rate with a mass-spectrometer. A PI controller was then used to maintain the growth rate at a desired value by adjusting the dilution rate to the reactor. For the chosen set-point (0.1 d^–1), the final MAb concentration achieved was about 100 mg/1. It was found that there was a delay in the assimilation of the glutamine that should be included in the model to explain the lower MAb production in feedback mode. A higher production can be expected also for a lower set-point in feedback operation.List of Symbols Amm mM ammonia concentration - CPR l/(ld) carbon dioxide production rate - D _t l/d dilution rate - e _t l/d control error - F L/d feed flow rate - Glc mM glucose concentration - Gln mM glutamine concentration - Lac mM lactate concentration - I mg performance index - k _d l/d specific death rate - K _damm l/(mM · d) kinetic parameter for death rate - K _dgln mM kinetic parameter for death rate - K _dlac l/(mM·d) kinetic parameter for death rate - K _c l controller gain - K _glc mM kinetic parameter for growth rate - K _gln mM kinetic parameter for growth rate - K _tr L/(cell·d) transport coefficient - K l/d kinetic parameter for Mab production - m _glc mM/(cell·d) maintenance coefficient - M _Ab mg/l monoclonal antibody concentration - P _t covariance matrix - q _glc l/(l·cell·d) specific CO₂ production rate - q _glc mM/(cell·d) specific glucose uptake rate - q _gln mM/(cell·d) specific glutamine uptake rate - q _Mab mg/(l·cell·d) specific monoclonal antibody production - t _f d final culture time - T d sampling rate - u control input - V l reactor volume - X cell/l total cells concentration - X _v cell/l viable cells concentration - Y yield coefficient Greek mg/cell variable yield coefficient - ₀ mg/(cell·d) growth-associated kinetic parameter - mg/(cell·d) non growth-associated kinetic parameter - _t+1 defined by Eq. (19) - forgetting factor - l/d specific growth rate - _max l/d specific growth rate - _i d controller integral time constant     

Lipase-catalyzed kinetic resolution of (R,S)-1-phenylethyl propionate in an enzyme membrane reactor

Enzymatic stereoselective hydrolysis of (R,S)-1-phenylethyl propionate was performed in a stirred tank and in a biphasic enzyme membrane reactor. Lipase from Pseudomonas sp. was proved to be a good enantioselective catalyst for this reaction. The enzyme was covalently immobilized in a porous polyamide membrane (flat sheet as well as hollow-fibres) via glutaraldehyde. An influence of membrane hydrophobicity on reactor performance was observed. Initial lipase activity and productivity in the processes were equal to 1.05 × 10^?4, 1.3 × 10^?5 and 1.0 × 10^?5 mole/(h × mg of enzyme) in the case of native lipase, in the aromatic polyamide hydrophobic membrane reactor and in the hydrophilic polyamide-6 membrane reactor, respectively. The influence of some factors such as temperature, pH, buffer concentration, initial substrate concentration and addition of β-cyclodextrin derivatives on reaction rate and enantioselectivity was investigated and discussed. In the enzyme membrane reactor both organic and aqueous phases circulated countercurrently on both sides of the membrane. At a conversion degree of under 55–60%, pure enantiomer of the remaining ester (i.e. > 98%) was obtained.     

Application of response surface methodology to study the removal of estrogens in a laccase-mediated continuous membrane reactor

Abstract

A three-level Box–Behnken factorial design combined with response surface methodology (RSM) was applied as a tool to study the laccase-catalyzed removal of three estrogenic compounds: estrone (E1), estradiol (E2), and ethinylestradiol (EE2), in a continuous enzymatic membrane reactor (EMR). Three main factors affecting the treatment efficiency were considered: enzyme activity, hydraulic residence time (HRT) and oxygenation rate. As expected, laccase activity and HRT showed large effects and, interestingly, the relevance of oxygen in improving the oxidation kinetics through raising the dissolved oxygen above saturation levels was demonstrated. When considering elimination rates as the response, optimal conditions were: 1,000 U/L of laccase, 1 h HRT and 60 mgO₂/(L·h) of oxygenation rate, predicting 2.82–3.24 mg eliminated/(L·h), (71–81% of oxidation). These optimum conditions were successfully validated, and 75% of estrogenicity reduction was achieved. On the other hand, only 100 U/L were found as optimal to maximize the efficacy of the enzyme: E1 was oxidized by 0.06 mg/(L·h·U), although the removal of estrogenicity decreased to 60%. The methodology was also applied to maximize the reduction of estrogenic activity: the highest values assayed [1,000 U/L, HRT 4 h and 60 mgO₂/(L·h)] provided 99% detoxification.     

Production of high-fructose syrup from date by-products in a packed bed bioreactor using a novel thermostable invertase from Aspergillus awamori

Abstract

Dates by-products (discarded dates) from the sucrose-rich variety of ‘Deglet Nour’ were used as starting biomass to produce high-fructose syrup (HFS) based on an immobilized invertase process. A novel extracellular thermostable invertase obtained from Aspergillus awamori cultivated in submerged medium was induced with sucrose at 1% and used for this purpose. A zymogram of the crude extract showed the presence of a unique enzyme form that was optimally produced on the 5^th day. This enzyme preparation was biochemically characterized and immobilized on acetic acid-solubilized chitosan by covalent binding using glutaraldehyde (Yi = 88%, Ya = 54% and 15.53 U/g). When deployed in a packed bed reactor (PBR), HFS was efficiently and continuously produced from sucrose derived from aqueous date extracts. Feeding with an extract initially containing 139.2 g/L total sugar with 78.6 g/L sucrose at a flow rate of 17 ml/h, 50°C and pH 6 resulted in a conversion factor of 0.95 and a final fructose content in the syrup of 69 g/L.     

Acetate production from whey lactose using co-immobilized cells of homolactic and homoacetic bacteria in a fibrous-bed bioreactor

Acetate was produced from whey lactose in batch and fed-batch fermentations using co-immobilized cells of Clostridium formicoaceticum and Lactococcus lactis. The cells were immobilized in a spirally wound fibrous sheet packed in a 0.45-L column reactor, with liquid circulated through a 5-L stirred-tank fermentor. Industrial-grade nitrogen sources, including corn steep liquor, casein hydrolysate, and yeast hydrolysate, were studied as inexpensive nutrient supplements to whey permeate and acid whey. Supplementation with either 2.5% (v/v) corn steep liquor or 1.5 g/L casein hydrolysate was adequate for the cocultured fermentation. The overall acetic acid yield from lactose was 0.9 g/g, and the productivity was 0.25 g/(L h). Both lactate and acetate at high concentrations inhibited the homoacetic fermentation. To overcome these inhibitions, fed-batch fermentations were used to keep lactate concentration low and to adapt cells to high-concentration acetate. The final acetate concentration obtained in the fed-batch fermentation was 75 g/L, which was the highest acetate concentration ever produced by C. formicoaceticum. Even at this high acetate concentration, the overall productivity was 0.18 g/(L h) based on the total medium volume and 1.23 g/(L h) based on the fibrous-bed reactor volume. The cells isolated from the fibrous-bed bioreactor at the end of this study were more tolerant to acetic acid than the original culture used to seed the bioreactor, indicating that adaptation and natural selection of acetate-tolerant strains occurred. This cocultured fermentation process could be used to produce a low-cost acetate deicer from whey permeate and acid whey.     

Development of a serial bioreactor system for direct ethanol production from starch using<Emphasis Type="Italic">Aspergillus niger</Emphasis> and<Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Aspergillus niger hyphae were found to grow with unliquefied potato starch under aerobic conditions, but did not grow under anaerobic conditions. The raw culture ofA. niger catalyzed saccharification of potato starch to glucose, producing approximately 12 g glucose/L/day/ The extracellular enzyme activity was decreased in proportion to incubation time, and approximately 64% of initial activity was maintained after 3 days. At 50°C,A. niger hyphae growth stopped, while the extracellular enzyme activity peaked. On the basis of theA. niger growth property and enzyme activity, we designed a serial bioreactor system composed of four different reactors. Fungal hyphae were cultivated in reactor I at 30°C, uniquefied starch was saccharified to glycose by a fungal hyphae culture in reactors II and III at 50°C, and glucose was fermented to ethanol bySaccharomyces cerevisiae in reactor IV. The total glucose produced by fungal hyphae in reactor I and saccharification in reactor II was about 42 g/L/day. Ethanol production in reactor IV was approximately 22 g/L/day, which corresponds to about 79% of the theoretical maximum produced from 55 g starch/L/day.     

Characterization of a hydrogen-producing granular sludge

This study demonstrated that hydrogen-producing acidogenic sludge could agglutinate into granules in a well-mixed reactor treating a synthetic sucrose-containing wastewater at 26 degrees C, pH 5.5, with 6 h of hydraulic retention. A typical matured granule is 1.6 mm in diameter, 1.038 g/mL in density, 11% in ash content, and over 50 m/h in settling velocity. Treating a solution containing 12.15 g/L of sucrose at a volumetric loading rate of 48.6 g/(L x d), the reactor containing 20 g/L of granular sludge degraded 97% of sucrose. Effluent comprised 46% acetate and 49% butyrate and the methane-free biogas comprised 63% hydrogen, 35% carbon dioxide, and 2% nitrogen. Hydrogen production rate was 13.0 L/(L x d), and the yield was 0.28 L/g-sucrose. The granule had multiple cracks on the surface and comprised two morphological types of bacteria: fusiform bacilli and a spore-forming bacterium. Phylogenetic analysis showed that 69.1% of the clones were affiliated with four Clostridium species in the family Clostridiaceae, and 13.5% with Sporolactobacillus racemicus in the Bacillus/Staphylococcus group.     

氧化葡萄糖酸杆菌生物催化1,3-丙二醇合成3-羟基丙酸

3-羟基丙酸是一种潜在的重要化工产品,可作为中间体合成多种有经济价值的工业用化合物。文中利用氧化葡萄糖酸杆菌生物催化1,3-丙二醇合成3-羟基丙酸。首先在50 mL摇瓶中(转化体系为10 mL)考察细胞加入量、底物和产物浓度等对催化反应的影响。在此基础上,在2 L鼓泡塔中(转化体系为1 L),采取适当的补料方式和生物转化与分离相耦合的手段解除抑制,以提高目标产物终浓度。结果表明:高底物和产物浓度通过降低反应初速度抑制转化的进行,并确定了最佳催化反应条件为6 g/L菌体量,pH 5.5。利用流加补料方式维持反应体系中底物浓度在15~20 g/L,经过60 h的反应,3-羟基丙酸的浓度达到60.8 g/L,生产强度为1.0g/(L.h),转化率为84.3%。采用生物转化与分离相耦合的方法,经过50 h的转化反应,3-羟基丙酸的总产量达76.3 g/L,生产强度为1.5 g/(L.h),转化率83.7%。研究结果对利用氧化葡萄糖酸杆菌的不完全氧化醇类化合物特性实现其在工业生物催化中的应用具有一定的指导意义。     

Bioconversion of acrylonitrile to acrylamide using polyacrylamide entrapped cells of <Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> PA-34

The nitrile hydratase (NHase) of Rhodococcus rhodochrous PA-34 catalyzed the conversion of acrylonitrile to acrylamide. The resting cells (having NHase activity) (8 %; 1 mL corresponds to 22 mg dry cell mass, DCM) were immobilized in polyacrylamide gel containing 12.5 % acrylamide, 0.6 % bisacrylamide, 0.2 % diammonium persulfate and 0.4 % TEMED. The polyacrylamide entrapped cells (1.12 mg DCM/mL) completely converted acrylonitrile in 3 h at 10 °C, using 0.1 mol/L potassium phosphate buffer. In a partitioned fed batch reactor, 432 g/L acrylamide was accumulated after 1 d. The polyacrylamide discs were recycled up to 3×; 405, 210 and 170 g/L acrylamide was produced in 1st, 2nd and 3rd recycling reactions. In four cycles, a total of 1217 g acrylamide was produced by recycling the same mass of entrapped cells.     

Integrated biogas upgrading and hydrogen utilization in an anaerobic reactor containing enriched hydrogenotrophic methanogenic culture

Biogas produced by anaerobic digestion, is mainly used in a gas motor for heat and electricity production. However, after removal of CO₂, biogas can be upgraded to natural gas quality, giving more utilization possibilities, such as utilization as autogas, or distant utilization by using the existing natural gas grid. The current study presents a new biological method for biogas upgrading in a separate biogas reactor, containing enriched hydrogenotrophic methanogens and fed with biogas and hydrogen. Both mesophilic‐ and thermophilic anaerobic cultures were enriched to convert CO₂ to CH₄ by addition of H₂. Enrichment at thermophilic temperature (55°C) resulted in CO₂ and H₂ bioconversion rate of 320 mL CH₄/(gVSS h), which was more than 60% higher than that under mesophilic temperature (37°C). Different dominant species were found at mesophilic‐ and thermophilic‐enriched cultures, as revealed by PCR–DGGE. Nonetheless, they all belonged to the order Methanobacteriales, which can mediate hydrogenotrophic methanogenesis. Biogas upgrading was then tested in a thermophilic anaerobic reactor under various operation conditions. By continuous addition of hydrogen in the biogas reactor, high degree of biogas upgrading was achieved. The produced biogas had a CH₄ content, around 95% at steady‐state, at gas (mixture of biogas and hydrogen) injection rate of 6 L/(L day). The increase of gas injection rate to 12 L/(L day) resulted in the decrease of CH₄ content to around 90%. Further study showed that by decreasing the gas–liquid mass transfer by increasing the stirring speed of the mixture the CH₄ content was increased to around 95%. Finally, the CH₄ content around 90% was achieved in this study with the gas injection rate as high as 24 L/(L day). Biotechnol. Bioeng. 2012; 109: 2729–2736. © 2012 Wiley Periodicals, Inc.     

An novel immobilization method of Saccharomyces cerevisiae to sorghum bagasse for ethanol production

Natural sorghum bagasse without any treatment was used to immobilize Saccharomyces cerevisiae at 0.6+/-0.2g dry cell weight (DCW)/g dry sorghum bagasse weight (DSW) through solid-state or semi-solid state incubation. The scanning electron microscopy (SEM) of the carriers revealed the friendship between yeast cells and sorghum bagasse are adsorption and embedding. The ethanol productivity of the immobilized cells was 2.24 times higher than the free cells. In repeated batch fermentation with an initial sugar concentration of 200g/L, nearly 100% total sugar was consumed after 16 h. The ethanol yield and productivity were 4.9 g/g consumed sugar on average and 5.72 g/(Lh), respectively. The immobilized cell reactor was operated over a period of 20 days without breakage of the carriers, while the free cell concentration in the effluent remained less than 5 g/L thoughout the fermentation. The maximum ethanol productivity of 16.68 g/(Lh) appeared at the dilution rate of 0.3h(-1).     

Continuous medium perfusion leads to long-term cell viability and oxygen production in high-density photobioreactors

Summary A light-emitting diode-based photobioreactor (LED-based PBR) operated in a continuous perfusion mode with a perfusion rate of 3 to 6 reactor volumes a day supports high-density algal cultures, of cell concentrations up to 4·10⁹ cells/mL, or 25 g/L. The oxygen production rate at its peak was 13 to 15 mmol/(L·h). Continuous medium perfusion allowed for long-term stable oxygen production, while oxygen production in batch mode ceased when stationary phase was reached.     

Production of pullulanase by free and immobilized cells of <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> NRC22 in batch and continuous cultures

The production of extracellular pullulanase by Bacillus licheniformis NRC22 was investigated using different fermentation modes. In batch culture maximal enzyme activity of 18 U/ml was obtained after 24 h of growth. In continuous fermentation by the free cells, maximal reactor productivity (4.15 KU/l/h) with enzyme concentration of 14.8 U/ml and specific productivity of 334.9 U/g wet cells/h was attained at a dilution rate of 0.28/h, over a period of 25 days. B. licheniformis NRC22 cells were immobilized on Ca-alginate. The immobilization conditions with respect to matrix concentration and cell load was optimized for maximal enzyme production. In repeated batch operation, the activity of the immobilized cells was stable during the 10 cycles and the activity remained between 9.8 and 7.7 U/ml. Continuous production of pullulanase by the immobilized cells was investigated in a packed–bed reactor. Maximal reactor productivity (7.0 KU/h) with enzyme concentration of 16.8 U/ml and specific productivity of 131.64 U/g wet cells/h was attained at dilution rate of 0.42/h. The enzyme activity in the effluent started to decline gradually to the level of 8.7 U/ml after 25 days of the operation.     

实验室模拟高负荷SPAC厌氧反应器运行

采用模拟废水, 对新型高负荷螺旋式自循环(Spiral automatic circulation, SPAC)厌氧反应器的运行性能进行了实验室模拟研究。结果表明: 在30oC, 水力停留时间(HRT)为12 h, 进水COD浓度从8000 mg/L升至20 000 mg/L的条件下, 反应器的COD去除率为91.1%~95.7%, 平均去除率为93.6％。在进水浓度为20 000 mg/L, HRT由5.95 h缩短至1.57 h的工况下, COD去除率从96.0%降低至78.7%, 反应器达到最高容积负荷率306 g COD/(L·d), 最大容积COD去除率240 g/(L·d), 最高容积产气率131 L/(L·d)。该反应器对基质浓度的连续提升具有良好的适应能力。进水COD浓度由8000 mg/L提升至20 000 mg/L时, 出水COD浓度一直处在较低水平(平均为852?mg/L), 容积COD去除率和容积产气率分别提高162%和119%。该反应器对HRT的连续缩短也有良好的适应能力。HRT由5.95 h缩短至1.57 h时,反应器容积COD去除率和容积产气率分别升高191%和195%。     

Bacterioplankton and bacteriobenthos of some floodplain lakes in the course of the lower Amur river

The main structural and functional characteristics of bacterioplankton and bacteriobenthos of three lakes in the lower course of the Amur River are presented: the total number of bacteria (TNB), biomass, the numbers of bacteria of certain aerobic and anaerobic groups; the intensities of methanogenesis (MG), methane oxidation (MO), assimilation of 14C-compounds, sulfate reduction (SR); and gross estimate of organic matter decomposition (D). Depending on the reservoir type and the anthropogenic load, TNB constituted (2.27 to 16.1) x 10(6) cells/ml in water and (1.06 to 10.35) x 10(9) cells/ml in sediments; MO was 0 to 0.28 ml CH4/(1 day) in water and 0 to 8.4 ml CH4/(dm3 day) in sediments; MG in sediments was 0.001 to 40 ml CH4/(dm3 day); SR varied from 0.001 to 24.8 mg S/(dm3 day); D was 0.3 to 25 g C/(m2 day) in water and 0.2 to 4.9 g C/(m2 day) in sediments. The role of anaerobic microbial processes of organic matter decomposition was shown to increase with an increase in the anthropogenic load, attaining 95% of the total D in the ecosystem of an accumulating pond.     

Drug-Induced Up-Regulation of Dopamine D2 Receptors on Cultured Cells

Abstract: Ligand-induced up-regulation of recombinant dopamine D2 receptors was assessed using C₆ glioma cells stably expressing the short (415-amino-acid; D2_S) and long (444-amino-acid; D2_L) forms of the receptor. Overnight treatment of C6-D2_L cells with N-propylnorapomorphine (NPA) caused a time- and concentration-dependent increase in the density of receptors, as assessed by the binding of radioligand to membranes prepared from the cells, with no change in the affinity of the receptors for the radioligand. The effect of 10 µM NPA was maximal after 10 h, at which time the density of D2_L receptors was more than doubled. The agonists dopamine and quinpirole also increased the density of D2_L receptors. The receptor up-regulation was not specific for agonists, because the antagonists epidepride, sulpiride, and domperidone caused smaller (30–60%) increases in receptor density. Prolonged treatment with 10 µM NPA desensitized D2_L receptors, as evidenced by a reduced ability of dopamine to inhibit adenylyl cyclase, whereas treatment with sulpiride was associated with an enhanced responsiveness to dopamine. The magnitude of NPA-induced receptor up-regulation in each of four clonal lines of C6-D2_L cells (mean increase, 80%) was greater than in all four lines of C6-D2_S cells (33%). Inactivation of pertussis toxin-sensitive G proteins had no effect on the basal density of D2_L receptors or on the NPA-induced receptor up-regulation. Treatment with 5 µg/ml of cycloheximide, on the other hand, decreased the basal density of receptors and attenuated, but did not prevent, the NPA-induced increase. Chimeric D1/D2 receptors were used to identify structural determinants of dopamine receptor regulation. Treatment with the D1/D2 agonist NPA decreased the density of D1 and chimeric CH4 and CH3 receptors. The latter two receptors have D1 sequence from the amino-terminus to the amino-terminal end of transmembrane region (TM) VII and VI, respectively. CH2, with D1 sequence up to the amino-terminal end of TM V, and thus the third cytoplasmic loop of the D2 receptor, was up-regulated by NPA or the D2-selective agonist quinpirole. Quinpirole treatment decreased the density of CH3 and had no effect on CH4 or D1 receptors. The different responses of CH2 and CH3 to agonist treatment suggest a role for TM V and the third cytoplasmic loop in the direction of receptor regulation.     

代谢工程改造大肠杆菌合成己二酸

己二酸是一种具有重要应用价值的二元羧酸,是合成尼龙-66的关键前体。目前,生物法生产己二酸存在生产周期长、生产效率低的问题。本研究选择一株野生型高产琥珀酸菌株大肠杆菌(Escherichia coli) FMME N-2为底盘细胞,首先通过引入逆己二酸降解途径的关键酶,成功构建了可合成0.34 g/L己二酸的E. coli JL00菌株;接着,对合成路径限速酶进行表达优化,使E. coli JL01菌株在摇瓶发酵条件下产量达到0.87 g/L;随后,通过敲除sucD基因、过表达acs基因和突变lpd基因的组合策略平衡己二酸合成前体的供应,优化菌株E. coli JL12己二酸产量进一步提升至1.51 g/L;最后,在5 L发酵罐上对己二酸发酵工艺进行优化。工程菌株经72 h分批补料发酵,己二酸的产量达到22.3 g/L,转化率为0.25 g/g,生产强度为0.31 g/(L·h),具备了一定的应用潜力。本研究可为包括己二酸在内的多种二元羧酸细胞工厂的构建提供理论依据和技术基础。     

Production of 8,11‐dihydroxy and 8‐hydroxy unsaturated fatty acids from unsaturated fatty acids by recombinant Escherichia coli expressing 8,11‐linoleate diol synthase from Penicillium chrysogenum

Hydroxy unsaturated fatty acids can be used as antimicrobial surfactants. 8,11‐Linoleate diol synthase (8,11‐LDS) catalyzes the conversion of unsaturated fatty acid to 8‐hydroperoxy unsaturated fatty acid, and it is subsequently isomerized to 8,11‐dihydroxy unsaturated fatty acid by the enzyme. The optimal reaction conditions of recombinant Escherichia coli expressing Penicillium chrysogenum 8,11‐LDS for the production of 8,11‐dihydroxy‐9,12(Z,Z)‐octadecadienoic acid (8,11‐DiHODE), 8,11‐dihydroxy‐9,12,15(Z,Z,Z)‐octadecatrienoic acid (8,11‐DiHOTrE), 8‐hydroxy‐9(Z)‐hexadecenoic acid (8‐HHME), and 8‐hydroxy‐9(Z)‐octadecenoic acid (8‐HOME) were pH 7.0, 25°C, 10 g/L linoleic acid, and 20 g/L cells; pH 6.0, 25°C, 6 g/L α‐linolenic acid, and 60 g/L cells; pH 7.0, 25°C, 8 g/L palmitoleic acid, and 25 g/L cells; and pH 8.5, 30°C, 6 g/L oleic acid, and 25 g/L cells, respectively. Under these optimized conditions, the recombinant cells produced 6.0 g/L 8,11‐DiHODE for 60 min, with a conversion of 60% (w/w) and a productivity of 6.0 g/L/h; 4.3 g/L 8,11‐DiHOTrE for 60 min, with a conversion of 72% (w/w) and a productivity of 4.3 g/L/h; 4.3 g/L 8‐HHME acid for 60 min, with a conversion of 54% (w/w) and a productivity of 4.3 g/L/h; and 0.9 g/L 8‐HOME for 30 min, with a conversion of 15% (w/w) and a productivity of 1.8 g/L/h. To best of our knowledge, this is the first report on the biotechnological production of 8,11‐DiHODE, 8,11‐DiHOTrE, 8‐HHME, and 8‐HOME. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:390–396, 2017