Three-dimensional structure of the beta subunit of E. coli DNA polymerase III holoenzyme: a sliding DNA clamp.

The crystal structure of the beta subunit (processivity factor) of DNA polymerase III holoenzyme has been determined at 2.5 A resolution. A dimer of the beta subunit (M(r) = 2 x 40.6 kd, 2 x 366 amino acid residues) forms a ring-shaped structure lined by 12 alpha helices that can encircle duplex DNA. The structure is highly symmetrical, with each monomer containing three domains of identical topology. The charge distribution and orientation of the helices indicate that the molecule functions by forming a tight clamp that can slide on DNA, as shown biochemically. A potential structural relationship is suggested between the beta subunit and proliferating cell nuclear antigen (PCNA, the eukaryotic polymerase delta [and epsilon] processivity factor), and the gene 45 protein of the bacteriophage T4 DNA polymerase.     

Crystal structure of the processivity clamp loader gamma (gamma) complex of E. coli DNA polymerase III

The gamma complex, an AAA+ ATPase, is the bacterial homolog of eukaryotic replication factor C (RFC) that loads the sliding clamp (beta, homologous to PCNA) onto DNA. The 2.7/3.0 A crystal structure of gamma complex reveals a pentameric arrangement of subunits, with stoichiometry delta':gamma(3):delta. The C-terminal domains of the subunits form a circular collar that supports an asymmetric arrangement of the N-terminal ATP binding domains of the gamma motor and the structurally related domains of the delta' stator and the delta wrench. The structure suggests a mechanism by which the gamma complex switches between a closed state, in which the beta-interacting element of delta is hidden by delta', and an open form similar to the crystal structure, in which delta is free to bind to beta.     

The polymerase subunit of DNA polymerase III of Escherichia coli. II. Purification of the alpha subunit, devoid of nuclease activities

The alpha subunit (140 kDa) of DNA polymerase III (pol III) holoenzyme has been purified to near-homogeneity from a plasmid-carrying Escherichia coli strain which overproduced the alpha subunit about 20-fold. Pol III core (containing only the alpha, epsilon, and theta subunits), produced at twice the normal level, was also purified in good yield. The isolated alpha subunit has DNA polymerase activity, which is completely inhibited by 10 mM N-ethylmaleimide or 150 mM KCl as observed in the pol III core or holoenzyme. The alpha subunit has an apparent turnover number of 7.7 nucleotides polymerized per s, compared to 20 for pol III core, and is more thermolabile. The alpha subunit lacks the 3'----5' exonuclease (proofreading) activity of pol III core; neither alpha subunit nor core (nor holoenzyme) possesses any of the previously reported 5'----3' exonuclease activity. Thus, the alpha polypeptide is the polymerase subunit and epsilon (27 kDa) is the proofreading subunit (Scheuermann, R. H., and Echols, H. (1984) Proc. Natl. Acad. Sci. U. S. A. 81, 7747-7751). Together with the theta polypeptide (10 kDa), of unknown function, they form a pol III core with greater stability and catalytic efficiency.     

The polymerase subunit of DNA polymerase III of Escherichia coli. I. Amplification of the dnaE gene product and polymerase activity of the alpha subunit

The Escherichia coli dnaE gene, which encodes the alpha subunit of DNA polymerase III (pol III) holoenzyme, has been cloned in a plasmid containing the PL promoter of phage lambda and thermally induced to overproduce the alpha subunit. In cells carrying this plasmid (pKH167), the alpha subunit was amplified, after heat induction, to a level of about 0.2% of the total cellular protein. Polymerase activity was assayed in three ways: (i) gap-filling by pol III holoenzyme and subassemblies of it, (ii) the extensive replication of a primed, single-stranded DNA circle only by pol III holoenzyme, and (iii) complementation of a crude, inactive pol III holoenzyme (temperature-sensitive dnaE mutant fraction) in replication of a primed, single-stranded DNA circle. Amplification of the alpha subunit raised the polymerase level 10-fold in assay (i), indicative of the dependence of pol III gap-filling activity on this polypeptide; pol III holoenzyme activity remained unaffected (assay (ii)), but the complementation activity was raised 5-fold (assay (iii)). Thus, the elevated alpha subunit (free or in a subassembly form) can substitute in vitro for a defective alpha subunit in pol III holoenzyme, but cannot increase the in vivo level of about eight pol III holoenzyme molecules per cell. This low level of pol III holoenzyme is fixed in wild type cells (bearing no plasmid) despite the presence of a 5-fold excess of the alpha subunit, as inferred from the various assays. These results suggest that the low level of pol III holoenzyme is determined by a factor or factors other than the level of the alpha subunit.     

Solution structure of Domains IVa and V of the tau subunit of Escherichia coli DNA polymerase III and interaction with the alpha subunit

The solution structure of the C-terminal Domain V of the τ subunit of E. coli DNA polymerase III was determined by nuclear magnetic resonance (NMR) spectroscopy. The fold is unique to τ subunits. Amino acid sequence conservation is pronounced for hydrophobic residues that form the structural core of the protein, indicating that the fold is representative for τ subunits from a wide range of different bacteria. The interaction between the polymerase subunits τ and α was studied by NMR experiments where α was incubated with full-length C-terminal domain (τ_C16), and domains shortened at the C-terminus by 11 and 18 residues, respectively. The only interacting residues were found in the C-terminal 30-residue segment of τ, most of which is structurally disordered in free τ_C16. Since the N- and C-termini of the structured core of τ_C16 are located close to each other, this limits the possible distance between α and the pentameric δτ₂γδ′ clamp–loader complex and, hence, between the two α subunits involved in leading- and lagging-strand DNA synthesis. Analysis of an N-terminally extended construct (τ_C22) showed that τ_C14 presents the only part of Domains IVa and V of τ which comprises a globular fold in the absence of other interaction partners.     

Localization of the active site of the alpha subunit of the Escherichia coli DNA polymerase III holoenzyme.

Using a deletion approach on the alpha subunit of DNA polymerase III from Escherichia coli, we show that there is an N-proximal polymerase domain which is distinct from a more C-proximal tau and beta binding domain. Although deletion of 60 residues from the alpha N terminus abolishes polymerase activity, deletions of 48, 169, and 342 amino acids from the C terminus progressively impair its catalytic efficiency but preserve an active site. Deletion of 342 C-terminal residues reduces k(cat) 46-fold, increases the Km for gapped DNA 5.5-fold, and increases the Km for deoxynucleoside triphosphates (dNTPs) twofold. The 818-residue protein with polymerase activity displays typical Michaelis-Menten behavior, catalyzing a polymerase reaction that is saturable with substrate and linear with time. With the aid of newly acquired sequences of the polymerase III alpha subunit from a variety of organisms, candidates for two key aspartate residues in the active site are identified at amino acids 401 and 403 of the E. coli sequence by inspection of conserved acidic amino acids. The motif Pro-Asp-X-Asp, where X is a hydrophobic amino acid, is shown to be conserved among all known DnaE proteins, including those from Bacillaceae, cyanobacteria, Mycoplasma, and mycobacteria. The E. coli DnaE deletion protein with only the N-terminal 366 amino acids does not have polymerase activity, consistent with the proposed position of the active-site residues.     

SOS-inducible DNA polymerase II of E coli is homologous to replicative DNA polymerase of eukaryotes

The polB gene of Escherichia coli encodes DNA polymerase II whose role in vivo is not defined. The polB gene has been cloned and shown to be identical to a DNA damage-inducible gene dinA which is regulated by the LexA repressor. Nucleotide sequencing of polB reveals that E coli DNA polymerase II is highly homologous to replicative DNA polymerases of eukaryotes which include human DNA polymerase alpha and Saccharomyces cerevisiae DNA polymerases I, II and III. The polB gene is not required for growth, UV-repair and UV-mutagenesis.     

Nuclear magnetic resonance solution structure of the Escherichia coli DNA polymerase III theta subunit

The catalytic core of Escherichia coli DNA polymerase III holoenzyme contains three subunits: alpha, epsilon, and theta. The alpha subunit contains the polymerase, and the epsilon subunit contains the exonucleolytic proofreading function. The small (8-kDa) theta subunit binds only to epsilon. Its function is not well understood, although it was shown to exert a small stabilizing effect on the epsilon proofreading function. In order to help elucidate its function, we undertook a determination of its solution structure. In aqueous solution, theta yielded poor-quality nuclear magnetic resonance spectra, presumably due to conformational exchange and/or protein aggregation. Based on our recently determined structure of the theta homolog from bacteriophage P1, named HOT, we constructed a homology model of theta. This model suggested that the unfavorable behavior of theta might arise from exposed hydrophobic residues, particularly toward the end of alpha-helix 3. In gel filtration studies, theta elutes later than expected, indicating that aggregation is potentially responsible for these problems. To address this issue, we recorded 1H-15N heteronuclear single quantum correlation (HSQC) spectra in water-alcohol mixed solvents and observed substantially improved dispersion and uniformity of peak intensities, facilitating a structural determination under these conditions. The structure of theta in 60/40 (vol/vol) water-methanol is similar to that of HOT but differs significantly from a previously reported theta structure. The new theta structure is expected to provide additional insight into its physiological role and its effect on the epsilon proofreading subunit.     

The proofreading exonuclease subunit epsilon of Escherichia coli DNA polymerase III is tethered to the polymerase subunit alpha via a flexible linker

Escherichia coli DNA polymerase III holoenzyme is composed of 10 different subunits linked by noncovalent interactions. The polymerase activity resides in the α-subunit. The ε-subunit, which contains the proofreading exonuclease site within its N-terminal 185 residues, binds to α via a segment of 57 additional C-terminal residues, and also to θ, whose function is less well defined. The present study shows that θ greatly enhances the solubility of ε during cell-free synthesis. In addition, synthesis of ε in the presence of θ and α resulted in a soluble ternary complex that could readily be purified and analyzed by NMR spectroscopy. Cell-free synthesis of ε from PCR-amplified DNA coupled with site-directed mutagenesis and selective ¹⁵N-labeling provided site-specific assignments of NMR resonances of ε that were confirmed by lanthanide-induced pseudocontact shifts. The data show that the proofreading domain of ε is connected to α via a flexible linker peptide comprising over 20 residues. This distinguishes the α : ε complex from other proofreading polymerases, which have a more rigid multidomain structure.     

Crystal structure of the catalytic core of human DNA polymerase kappa

We present the crystal structure of the catalytic core of human DNA polymerase kappa (hPolkappa), the first structure of a human Y-family polymerase. hPolkappa is implicated in the proficient extension of mispaired primer termini on undamaged DNAs, and in the extension step of lesion bypass. The structure reveals a stubby "fingers" subdomain, which despite its small size appears to be tightly restrained with respect to a putative templating base. The structure also reveals a novel "thumb" subdomain that provides a basis for the importance of the N-terminal extension unique to hPolkappa. And, most surprisingly, the structure reveals the polymerase-associated domain (PAD) juxtaposed on the dorsal side of the "palm" subdomain, as opposed to the fingers subdomain. Together, these properties suggest that the hPolkappa active site is constrained at the site of the templating base and incoming nucleotide, but the polymerase is less constrained following translocation of the lesion.     

The structure of T. aquaticus DNA polymerase III is distinct from eukaryotic replicative DNA polymerases

The crystal structure of Thermus aquaticus DNA polymerase III alpha subunit reveals that the structure of the catalytic domain of the eubacterial replicative polymerase is unrelated to that of the eukaryotic replicative polymerase but rather belongs to the Polbeta-like nucleotidyltransferase superfamily. A model of the polymerase complexed with both DNA and beta-sliding clamp interacting with a reoriented binding domain and internal beta binding site was constructed that is consistent with existing biochemical data. Within the crystal, two C-terminal domains are interacting through a surface that is larger than many dimer interfaces. Since replicative polymerases of eubacteria and eukaryotes/archaea are not homologous, the nature of the replicative polymerase in the last common ancestor is unknown. Although other possibilities have been proposed, the plausibility of a ribozyme DNA polymerase should be considered.     

Crystal structure of a DinB lesion bypass DNA polymerase catalytic fragment reveals a classic polymerase catalytic domain.

The UmuC/DinB family of bypass polymerases is responsible for translesion DNA synthesis and includes the human polymerases eta, iota, and kappa. We determined the 2.3 A resolution crystal structure of a catalytic fragment of the DinB homolog (Dbh) polymerase from Sulfolobus solfataricus and show that it is nonprocessive and can bypass an abasic site. The structure of the catalytic domain is nearly identical to those of most other polymerase families. Homology modeling suggests that there is minimal contact between protein and DNA, that the nascent base pair binding pocket is quite accessible, and that the enzyme is already in a closed conformation characteristic of ternary polymerase complexes. These observations afford insights into the sources of low fidelity and low processivity of the UmuC/DinB polymerases.     

Sequence-specific interaction of sigma subunit of E. coli RNA polymerase with DNA.

The interaction of sigma subunit of E. coli RNA polymerase with DNA, either double or single-stranded, and with two inhibitors of RNA synthesis was investigated by using antibodies directed against the subunit. Free sigma subunit was shown to interact with poly(dA), poly(dT), poly(dAC).poly(dGT), T7 DNA and, to a lesser degree, with lambda DNA. When the sigma subunit forms part of the holo enzyme, sigma also interacts with poly(dG).poly(dC). Rifampicin and streptolydigin interact with sigma in the holo enzyme and with free and core bound sigma subunit, respectively. The results suggest that sigma recognizes mainly AC-GT-sequences in double-stranded DNA. The findings are correlated with the base composition in RNA polymerase binding regions of promoters and suggest at least a general interaction between sigma subunit and single-stranded DNA in open complexes.     

The unstructured C-terminus of the tau subunit of Escherichia coli DNA polymerase III holoenzyme is the site of interaction with the alpha subunit

The τ subunit of Escherichia coli DNA polymerase III holoenzyme interacts with the α subunit through its C-terminal Domain V, τ_C16. We show that the extreme C-terminal region of τ_C16 constitutes the site of interaction with α. The τ_C16 domain, but not a derivative of it with a C-terminal deletion of seven residues (τ_C16Δ7), forms an isolable complex with α. Surface plasmon resonance measurements were used to determine the dissociation constant (K_D) of the α−τ_C16 complex to be ~260pM. Competition with immobilized τ_C16 by τ_C16 derivatives for binding to α gave values of K_D of 7μM for the α−τ_C16Δ7 complex. Low-level expression of the genes encoding τ_C16 and τ_C167, but not τ_C16Δ11, is lethal to E. coli. Suppression of this lethal phenotype enabled selection of mutations in the 3′ end of the τ_C16 gene, that led to defects in α binding. The data suggest that the unstructured C-terminus of τ becomes folded into a helix–loop–helix in its complex with α. An N-terminally extended construct, τ_C24, was found to bind DNA in a salt-sensitive manner while no binding was observed for τ_C16, suggesting that the processivity switch of the replisome functionally involves Domain IV of τ.     

Model for the catalytic domain of the proofreading epsilon subunit of Escherichia coli DNA polymerase III based on NMR structural data.

The DNA polymerase III holoenzyme (HE) is the primary replicative polymerase of Escherichia coli. The epsilon subunit of the HE complex provides the 3'-exonucleolytic proofreading activity for this enzyme complex. epsilon consists of two domains: an N-terminal domain containing the proofreading exonuclease activity (residues 1-186) and a C-terminal domain required for binding to the polymerase (alpha) subunit (residues 187-243). Multidimensional NMR studies of (2)H-, (13)C-, and (15)N-labeled N-terminal domains (epsilon186) were performed to assign the backbone resonances and measure H(N)-H(N) nuclear Overhauser effects (NOEs). NMR studies were also performed on triple-lableled [U-(2)H,(13)C,(15)N]epsilon186 containing Val, Leu, and Ile residues with protonated methyl groups, which allowed for the assignment of H(N)-CH(3) and CH(3)-CH(3) NOEs. Analysis of the (13)C(alpha), (13)C(beta), and (13)CO shifts, using chemical shift indexing and the TALOS program, allowed for the identification of regions of the secondary structure. H(N)-H(N) NOEs provided information on the assembly of the extended strands into a beta-sheet structure and confirmed the assignment of the alpha helices. Measurement of H(N)-CH(3) and CH(3)-CH(3) NOEs confirmed the beta-sheet structure and assisted in the positioning of the alpha helices. The resulting preliminary characterization of the three-dimensional structure of the protein indicated that significant structural homology exists with the active site of the Klenow proofreading exonuclease domain, despite the extremely limited sequence homology. On the basis of this analogy, molecular modeling studies of epsilon186 were performed using as templates the crystal structures of the exonuclease domains of the Klenow fragment and the T4 DNA polymerase and the recently determined structure of the E. coli Exonuclease I. A multiple sequence alignment was constructed, with the initial alignment taken from the previously published hidden Markov model and NMR constraints. Because several of the published structures included complexed ssDNA, we were also able to incorporate an A-C-G trinucleotide into the epsilon186 structure. Nearly all of the residues which have been identified as mutators are located in the portion of the molecule which binds the DNA, with most of these playing either a catalytic or structural role.     

Accessory protein function in the DNA polymerase III holoenzyme from E. coli.

DNA polymerases which duplicate cellular chromosomes are multiprotein complexes. The individual functions of the many proteins required to duplicate a chromosome are not fully understood. The multiprotein complex which duplicates the Escherichia coli chromosome, DNA polymerase III holoenzyme (holoenzyme), contains a DNA polymerase subunit and nine accessory proteins. This report summarizes our current understanding of the individual functions of the accessory proteins within the holoenzyme, lending insight into why a chromosomal replicase needs such a complex structure.     

Mutational specificity of the dnaE173 mutator associated with a defect in the catalytic subunit of DNA polymerase III of Escherichia coli.

We developed a system to examine forward mutations that occurred in the rpsL gene of Escherichia coli placed on a multicopy plasmid. Using this system we determined the mutational specificity for a dnaE173 mutator strain in which the editing function of DNA polymerase III is impeded. The frequency of rpsL- mutations increased 32,000-fold, due to the dnaE173 mutator, and 87 independent rpsL- mutations in the mutator strain were analyzed by DNA sequencing, together with 100 mutants recovered from dnaE+ strain, as the control. While half the number of mutations that occurred in the wild-type strain were caused by insertion elements, no such mutations were recovered from the mutator strain. A novel class of mutation, named "sequence substitution" was present in mutants raised in the dnaE173 strain; seven sequence substitutions induced in the mutator strain occurred at six sites, and all were located in quasipalindromic sequences, carrying the GTG or CAC sequence at one or both endpoints. While other types of mutation were found in both strains, single-base frameshifts were the most frequent events in the mutator strain. Thus, the mutator effect on this class of mutation was 175,000-fold. A total of 95% of the single-base frameshifts in the mutator strain were additions, most of which occurred at runs of A or C bases so as to increase the number of identical residues. Base substitutions, the frequency of which was enhanced 25,000-fold by the mutator effect, occurred primarily at several hotspots in the mutator strain, whereas those induced in the wild-type strain were more randomly distributed throughout the rpsL sequence. The dnaE173 mutator also increased the frequency of duplications 28,000-fold. Of the three duplications recovered from the mutator strain, one was a simple duplication, the region of which was flanked by direct repeats. The other duplications were complex, one half part of which was in the inverted orientation of a region containing two sets of inverted repeats. The same duplications were also recovered from the wild-type strain. The present data suggest that dnaE173 is a novel class of mutator that sharply induces sequence-directed mutagenesis, yielding high frequencies of single base frameshifts, duplications with inversions, sequence substitutions and base substitutions at hotspots.     

Structure of the theta subunit of Escherichia coli DNA polymerase III in complex with the epsilon subunit

The catalytic core of Escherichia coli DNA polymerase III contains three tightly associated subunits, the alpha, epsilon, and theta subunits. The theta subunit is the smallest and least understood subunit. The three-dimensional structure of theta in a complex with the unlabeled N-terminal domain of the epsilon subunit, epsilon186, was determined by multidimensional nuclear magnetic resonance spectroscopy. The structure was refined using pseudocontact shifts that resulted from inserting a lanthanide ion (Dy3+, Er3+, or Ho3+) at the active site of epsilon186. The structure determination revealed a three-helix bundle fold that is similar to the solution structures of theta in a methanol-water buffer and of the bacteriophage P1 homolog, HOT, in aqueous buffer. Conserved nuclear Overhauser enhancement (NOE) patterns obtained for free and complexed theta show that most of the structure changes little upon complex formation. Discrepancies with respect to a previously published structure of free theta (Keniry et al., Protein Sci. 9:721-733, 2000) were attributed to errors in the latter structure. The present structure satisfies the pseudocontact shifts better than either the structure of theta in methanol-water buffer or the structure of HOT. satisfies these shifts. The epitope of epsilon186 on theta was mapped by NOE difference spectroscopy and was found to involve helix 1 and the C-terminal part of helix 3. The pseudocontact shifts indicated that the helices of theta are located about 15 A or farther from the lanthanide ion in the active site of epsilon186, in agreement with the extensive biochemical data for the theta-epsilon system.     

The beta subunit dissociates readily from the Escherichia coli DNA polymerase III holoenzyme

Purified DNA polymerase III holoenzyme (holoenzyme) was separated by glycerol gradient sedimentation into the beta subunit and the subassembly that lacks it (pol III). In the presence of ATP, beta subunit dimer dissociated from holoenzyme with a KD of 1 nM; in the absence of ATP, the KD was greater than 5 nM. The beta subunit was known to remain tightly associated in the holoenzyme upon formation of an initiation complex with a primed template and during the course of replication. With separation from the template, holoenzyme dissociated into beta and pol III. Cycling to a new template depended on the reformation of holoenzyme. Holoenzyme was in equilibrium with pol III and the beta subunit in crude enzyme fractions as well as in pure preparations.