Polymerization of actin induced by a molar excess of ATP in a low salt buffer.

The polymerization of actin induced by dilution has previously been reported, where a 1000-fold molar excess of ATP over actin resulted when actin was diluted to 4.0 micrograms/ml in low salt buffer A (0.1 mM ATP, 0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 5 mM 2-mercaptoethanol, 1 mM NaN3). Filaments formed by the addition of ATP to a 1000-fold molar excess over actin in buffer B (0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 1 mM NaN3) were then separated by gel-filtration. When ATP was removed from these filaments using Dowex-1, depolymerization occurred. Thus, the reversible polymerization induced by the dilution of actin or by addition of ATP can be ascribed to the binding of ATP at the low affinity site of actin.     

Polymerization of actin induced by a molar excess of ATP in a low salt buffer

The polymerization of actin induced by dilution has previously been reported, where a 1000-fold molar excess of ATP over actin resulted when actin was diluted to 4.0 microg/ml in low salt buffer A (0.1 mM ATP, 0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 5 mM 2-mercaptoethanol, 1 mM NaN3). Filaments formed by the addition of ATP to a 1000-fold molar excess over actin in buffer B (0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 1 mM NaN3) were then separated by gel-filtration. When ATP was removed from these filaments using Dowex-1, depolymerization occurred. Thus, the reversible polymerization induced by the dilution of actin or by addition of ATP can be ascribed to the binding of ATP at the low affinity site of actin.     

Nuclear actin and transport of RNA

The role of nuclear actin filaments in the RNA transport was investigated. Mouse lymphoma cells, L5178Y, were labeled for 20 min with 3H-uridine, and the isolated nuclei were incubated in a medium consisting of 0.25 M sucrose, 10 mM Tris-HCl (pH 7.5), 2 mM CaCl2, 1 mM ATP and 1mM PMSF. Release of the rapidly labeled RNA from the nuclei was temperature-dependent and was stimulated by ATP. Phalloidin, an inhibitor of actin filament depolymerization, had no effect on the system at 10 or 100 micrograms/ml. Therefore, actin filament depolymerization may not be involved in the transport of RNA.     

Effects of chaetoglobosin J on the G-F transformation of actin

It was shown that substoichiometric concentrations of chaetoglobosin J, one of the fungal metabolites belonging to cytochalasins, inhibited the elongation at the barbed end of an actin filament. Stoichiometric concentrations of chaetoglobosin J decreased both the rate and the extent of actin polymerization in the presence of 75 mM KCl, 0.2 mM ATP and 10 mM Tris-HCl buffer at pH 8.0 and 25 degrees C. In contrast, stoichiometric concentrations of cytochalasin D accelerated actin polymerization. Chaetoglobosin J slowly depolymerized F-actin to G-actin until an equilibrium was reached. Analyses by a number of different methods showed the increase of monomer concentration at equilibrium to depend on chaetoglobosin J concentrations. F-actin under the influence of stoichiometric concentrations of chaetoglobosin J only slightly activated the Mg2+-enhanced ATPase activity of myosin at low ionic strength. It is suggested that when the structure of the chaetoglobosin-affected actin filaments is modified, the equilibrium is shifted to the monomer side, and the interaction with myosin is weakened.     

Caldesmon inhibits skeletal actomyosin subfragment-1 ATPase activity and the binding of myosin subfragment-1 to actin

Smooth muscle contraction is controlled in part by the state of phosphorylation of myosin. A recently discovered actin and calmodulin-binding protein, named caldesmon, may also be involved in regulation of smooth muscle contraction. Caldesmon cross-links actin filaments and also inhibits actin-activated ATP hydrolysis by myosin, particularly in the presence of tropomyosin. We have studied the effect of caldesmon on the rate of hydrolysis of ATP by skeletal muscle myosin subfragment-1, a system in which phosphorylation of the myosin is not important in regulation. Caldesmon is a very effective inhibitor of ATP hydrolysis giving up to 95% inhibition. At low ionic strength (approximately 20 mM) this effect does not require smooth muscle tropomyosin, whereas at high ionic strength (approximately 120 mM) tropomyosin enhances the inhibitory activity of caldesmon at low caldesmon concentrations. Cross-linking of actin is not essential for inhibition of ATP hydrolysis to occur since at high ionic strength there is very little cross-linking as determined by a low speed sedimentation assay. Under all conditions examined, the decrease in the rate of ATP hydrolysis is accompanied by a decrease in the binding of myosin subfragment-1 to actin. Furthermore, caldesmon weakens the equilibrium binding of myosin subfragment-1 to actin in the presence of pyrophosphate. We conclude that caldesmon has a general weakening effect on the binding of skeletal muscle myosin subfragment-1 to actin and that this weakening in binding may be responsible for inhibition of ATP hydrolysis.     

Isolation of an actin polymerization stimulator from bovine thyroid plasma membranes

An actin polymerization stimulator was purified from bovine thyroid plasma membranes by DNase I affinity column chromatography. Although the molecular weight of the protein was about 42,000 (42K) by sodium dodecyl sulfate polyacrylamide gel electrophoresis, it did not comigrate with actin. In the presence of 30 mM KCl, the 42K protein facilitated formation of actin filaments when analyzed by a centrifugation method, accelerated the initial phase of actin polymerization as measured in an Ostwald viscometer and increased the length of filaments as shown by electron microscopy. The 42K protein also accelerated the initial phase of actin polymerization in the presence of 100 mM KCl and 2 mM MgCl₂ but did not affect the final viscosity. The effect of the 42K protein was diminished by 5 uM cytochalasin B or 1 uM cytochalasin D. This 42K protein may anchor actin filaments onto the thyroid plasma membrane.     

Association of Serotonin, Dopamine, or Noradrenaline with an Actin-Like Component in Pheochromocytoma (PC12) Cells

A rat pheochromocytoma (PC12) cell line was used to examine the possibility that 5-hydroxytryptamine (serotonin), 3,4-dihydroxyphenylethylamine (dopamine), or noradrenaline may be associated with cytoplasmic actin, as was suggested by previous in vitro binding studies on an actin-like protein from rat brain synaptosomes. When PC12 cells were incubated with [3H]serotonin. [3H]dopamine, or [3H]noradrenaline for 30 min at 37 degrees C, approximately 2-4% of the radioactivity present in the cells was found to be associated with a high-molecular-weight (actin-like) component in supernatant fractions. Evidence relating this monoamine binding component to actin filaments includes: (a) its strong absorption by myosin filaments at low ionic strength: (b) a decrease in its affinity for myosin in the presence of 1 mM ATP, which lowers the affinity of authentic actin for myosin: (c) displacement of bound [3H]serotonin from it by DNase I, which binds strongly to actin and which inhibits [3H]serotonin binding to actin in vitro; (d) an increase in its binding of each monoamine (by 25-40%) after PC12 cells were preincubated with 10 microM cytochalasin B (a drug that induces depolymerization of F-actin). These findings suggest that serotonin, dopamine, or noradrenaline may associate with actin filaments in vivo.     

Assembly and Turnover of Short Actin Filaments by the Formin INF2 and Profilin

INF2 (inverted formin 2) is a formin protein with unique biochemical effects on actin. In addition to the common formin ability to accelerate actin nucleation and elongation, INF2 can also sever filaments and accelerate their depolymerization. Although we understand key attributes of INF2-mediated severing, we do not understand the mechanism by which INF2 accelerates depolymerization subsequent to severing. Here, we show that INF2 can create short filaments (<60 nm) that continuously turn over actin subunits through a combination of barbed end elongation, severing, and WH2 motif-mediated depolymerization. This pseudo-steady state condition occurs whether starting from actin filaments or monomers. The rate-limiting step of the cycle is nucleotide exchange of ADP for ATP on actin monomers after release from the INF2/actin complex. Profilin addition has two effects: 1) to accelerate filament turnover 6-fold by accelerating nucleotide exchange and 2) to shift the equilibrium toward polymerization, resulting in longer filaments. In sum, our findings show that the combination of multiple interactions of INF2 with actin can work in concert to increase the ATP turnover rate of actin. Depending on the ratio of INF2:actin, this increased flux can result in rapid filament depolymerization or maintenance of short filaments. We also show that high concentrations of cytochalasin D accelerate ATP turnover by actin but through a different mechanism from that of INF2.     

Modeling apoptotic chromatin condensation in normal cell nuclei. Requirement for intranuclear mobility and actin involvement

Hallmarks of the terminal stages of apoptosis are genomic DNA fragmentation and chromatin condensation. Here, we have studied the mechanism of condensation both in vitro and in vivo. We found that DNA fragmentation per se of isolated nuclei from non-apoptotic cells induced chromatin condensation that closely resembles the morphology seen in apoptotic cells, independent of ATP utilization, at physiological ionic strengths. Interestingly, chromatin condensation was accompanied by release of nuclear actin, and both condensation and actin release could be blocked by reversibly pretreating nuclei with Ca2+, Cu2+, diamide, or low pH, procedures shown to stabilize internal nuclear components. Moreover, specific inhibition of nuclear F-actin depolymerization or promotion of its formation also reduced chromatin condensation. Chromatin condensation could also be inhibited by exposing nuclei to reagents that bind to the DNA minor groove, disrupting native nucleosomal DNA wrapping. In addition, in cultured cells undergoing apoptosis, drugs that inhibit depolymerization of actin or bind to the minor groove also reduced chromatin condensation, but not DNA fragmentation. Therefore, the ability of chromatin fragments with intact nucleosomes to form large clumps of condensed chromatin during apoptosis requires the apparent disassembly of internal nuclear structures that may normally constrain chromosome subdomains in non-apoptotic cells.     

Depolymerization of F-actin by deoxyribonuclease I.

Deoxyribonuclease I causes depolymerization of filamentous muscle actin to form a stable complex of 1 mole DNAase I:1 mole actin. The regulatory proteins tropomyosin and troponin bind to filamentous actin and slow down but do not prevent the depolymerization. In the absense of ATP, heavy meromyosin binds tightly to actin filaments and blocks completely the DNAase I: actin filament interaction. Addition of ATP releases heavy meromyosin; DNAase I is then rapidly inhibited and the actin filaments are depolymerized.     

The contractile basis of ameboid movement. II. Structure and contractility of motile extracts and plasmalemma-ectoplasm ghosts

The role of calcium and magnesium-ATP on the structure and contractility in motile extracts of Amoeba proteus and plasmalemma-ectoplasm "ghosts" of Chaos carolinensis has been investigated by correlating light and electron microscope observations with turbidity and birefringence measurements. The extract is nonmotile and contains very few F-actin filaments and myosin aggregates when prepared in the presence of both low calcium ion and ATP concentrations at an ionic strength of I = 0.05, pH 6.8. The addition of 1.0 mM magnesium chloride, 1.0 mM ATP, in the presence of a low calcium ion concentration (relaxation solution) induced the formation of some fibrous bundles of actin without contracting, whereas the addition of a micromolar concentration of calcium in addition to 1.0 mM magnesium-ATP (contraction solution) (Taylor, D. L., J. S. Condeelis, P. L. Moore, and R. D. Allen. 1973. J. Cell Biol. 59:378-394) initiated the formation of large arrays of F-actin filaments followed by contractions. Furthermore, plasmalemma-ectoplasm ghosts prepared in the relaxation solution exhibited very few straight F-actin filaments and myosin aggregates. In contrast, plasmalemmaectoplasm ghosts treated with the contraction solution contained many straight F-actin filaments and myosin aggregates. The increase in the structure of ameba cytoplasm at the endoplasm-ectoplasm interface can be explained by a combination of the transformation of actin from a less filamentous to a more structured filamentous state possibly involving the cross-linking of actin to form fibrillar arrays (see above-mentioned reference) followed by contractions of the actin and myosin along an undetermined distance of the endoplasm and/or ectoplasm.     

Purification and characterization of squid brain myosin.

Myosin was extracted from frozen squid brain and purified by a modification of the procedure of Pollard et al. (Pollard, T.D., Thomas, S.M., and Niederman, R. (1974) Anal. Biochem. 60, 258-266). Myosin was eluted from Bio-Gel A-15m column as a single peak of (K+-EDTA)-activated ATPase ((K+-EDTA)-ATPase) activity with an average partition coefficient (Kav) of 0.22. In sodium dodecyl sulfate-acrylamide gel electrophoresis, the purified myosin showed a predominant band with similar electrophoretic mobility as the heavy chain of rabbit skeletal muscle myosin, and two less intense bands near the bottom of the gel. No actin band was seen. The properties of the (K+-EDTA)-ATPase activity were: (a) the time course of the reaction was biphasic at 25 degrees but linear at 32 degrees; (b) the optimum rate of reaction was obtained between 0.3 and 0.8 M KCl; (c) the pH optimum was between 8.0 and 9.0; (d) the reaction was specific for ATP with an apparent Km of 0.19 mM. ATPase activity in 0.06 M KCl and 5 mM MgCl2 was increased about 1.5 times by a 10-fold excess of rabbit skeletal muscle F-actin and about 5 times by a 40-fold excess. The actin activation was inhibited slightly by the addition of 0.2 mM CaCl2 and completely by the addition of 10 mM CaCl2. Myosin formed arrowhead patterns with rabbit skeletal muscle F-actin as observed by electron microscopy of negatively stained samples. It also aggregated in bipolar filaments which attached to decorated actin filaments at different angles, as well as formed cross-connections and ladder-like patterns between actin filaments. These two forms of interactions between myosin and actin were abolished by treatment with MgATP.     

Isolation and properties of actin, myosin, and a new actinbinding protein in rabbit alveolar macrophages.

Actin, myosin, and a high molecular weight actin-binding protein were extracted from rabbit alveolar macrophages with low ionic strength sucrose solutions containing ATP, EDTA, and dithiothreitol, pH 7.0. Addition of KCl, 75 to 100 mM, to sucrose extracts of macrophages stirred at 25 degrees caused actin to polymerize and bind to a protein of high molecualr weight. The complex precipitated and sedimented at low centrifugal forces. Macrophage actin was dissociated from the binding protein with 0.6 M KCl, and purified by repetitive depolymerization and polymerization. Purified macrophage actin migrated as a polypeptide of molecular weight 45,000 on polyacrylamide gels with dodecyl sulfate, formed extended filaments in 0.1 M KCl, bound rabbit skeletal muscle myosin in the absence of Mg-2+ATP and activated its Mg-2+ATPase activity. Macrophage myosin was bound to actin remaining in the macrophage extracts after removal of the actin precipitated with the high molecular weight protein by KCl. The myosin-actin complex and other proteins were collected by ultracentrifugation. Macrophage myosin was purified from this complex or from a 20 to 50% saturated ammonium sulfate fraction of macrophage extracts by gel filtration on agarose columns in 0.6 M Kl and 0.6 M Kl solutions. Purified macrophage myosin had high specific K-+- and EDTA- and K-+- and Ca-2+ATPase activities and low specific Mg-2+ATPase activity. It had subunits of 200,000, 20,000, and 15,000 molecular weight, and formed bipolar filaments in 0.1 M KCl, both in the presence and absence of divalent cations. The high molecular weight protein that precipitated with actin in the sucrose extracts of macrophages was purified by gel filtration in 0.6 M Kl-0.6 M KCl solutions. It was designated a macrophage actin-binding protein, because of its association with actin at physiological pH and ionic strength. On polyacrylamide gels in dodecyl sulfate, the purified high molecular weight protein contained one band which co-migrated with the lighter polypeptide (molecular weight 220,000) of the doublet comprising purified rabbit erythrocyte spectrin. The macrophage protein, like rabbit erythrocyte spectrin, was soluble in 2 mM EDTA and 80% ethanol as well as in 0.6 M KCl solutions, and precipitated in 2 mM CaCl2 or 0.075 to 0.1 M KCl solutions. The macrophage actin-binding protein and rabbit erythrocyte spectrin eluted from agarose columns with a KAV of 0.24 and in the excluded volumes. The protein did not form filaments in 0.1 M KCl and had no detectable ATPase activity under the conditions tested.     

Random copolymerization of ATP-actin and ADP-actin

The equilibrium of the copolymerization of ATP-actin and ADP-actin was investigated by an analysis of the critical concentrations of mixtures of ATP-actin and ADP-actin. The molar ratio of bound ATP to bound ADP was controlled by the ratio of free ATP and ADP. The experiments were performed under conditions (100 mM KCl, l mM MgCl2, pH 7.5, 25 degrees C) where the ATP hydrolysis following binding of actin monomers to barbed filament ends was so slow that the distribution of ATP or ADP bound to the subunits near the ends of filaments was not affected by ATP hydrolysis. According to the analysis of the critical concentrations, the equilibrium constants for incorporation of ATP-actin or ADP-actin into filaments were independent of the type of nucleotide bound to contiguous subunits.     

Polymerization and depolymerization of actin with nucleotide states at filament ends

Polymerization induces hydrolysis of ATP bound to actin, followed by γ-phosphate release, which helps advance the disassembly of actin filaments into ADP-G-actin. Mechanical understanding of this correlation between actin assembly and ATP hydrolysis has been an object of intensive studies in biochemistry and structural biology for many decades. Although actin polymerization and depolymerization occur only at either the barbed or pointed ends and the kinetic and equilibrium properties are substantially different from each other, characterizing their properties is difficult to do by bulk assays, as these assays report the average of all actin filaments in solution and are therefore not able to discern the properties of individual actin filaments. Biochemical studies of actin polymerization and hydrolysis were hampered by these inherent properties of actin filaments. Total internal reflection fluorescence (TIRF) microscopy overcame this problem by observing single actin filaments. With TIRF, we now know not only that each end has distinct properties, but also that the rate of γ-phosphate release is much faster from the terminals than from the interior of actin filaments. The rate of γ-phosphate release from actin filament ends is even more accelerated when latrunculin A is bound. These findings highlight the importance of resolving structural differences between actin molecules in the interior of the filament and those at either filament end. This review provides a history of observing actin filaments under light microscopy, an overview of dynamic properties of ATP hydrolysis at the end of actin filament, and structural views of γ-phosphate release.     

Under physiological conditions actin disassembles slowly from the nonpreferred end of an actin filament

Incubation of the isolated acrosomal bundles of Limulus sperm with skeletal muscle actin results in assembly of actin onto both ends of the bundles. Because of the taper of these cross-linked bundles of actin filaments, one can distinguish directly the preferred end for assembly from the nonpreferred end. Loss of growth with time from the nonpreferred end was directly assessed by electron microscopy and found to be dependent upon salt concentration. Under physiological conditions (100 mM KCl, 1 mM MgCl2) and excess ATP (0.5 mM), depolymerization of the newly assembled actin filaments at the nonpreferred end over an 8-h period was 0.024 micron/h. Thus, even after 8 h, 63% of the bundles retained significant growth on their nonpreferred ends, the average length being 0.21 micron +/- 0.04. However, in the presence of 1.2 mM CaCl2, disassembly of actin monomers from the nonpreferred end increased substantially. By 8 h, only 7% of the bundles retained any actin growth on the nonpreferred ends, and the depolymerization rate off the nonpreferred end was 0.087 micron/h. From these results we conclude that, in the absence of other cellular factors, disassembly of actin subunits from actin filaments (subunit exchange) is too slow to influence most of the motile events that occur in cells. We discuss how this relates to treadmilling.     

Overrelaxation of muscle models in media with high concentrations of calcium ions and exposed to MgATP in "contraction-inducing" concentrations]

Cross-striation pattern and sarcomere length in isolated myofibrils (both glycerinated and fresh) as well as isometric tension of glycerinated fibers of rabbit m. psoas are unaffected by an evaluation in ionic strength of CaCl2 up to 0.2 in the absence of ATP. An addition of MgATP (1 to 3mM) to the Ca2+ media induces the changes which have been shown to be characteristic of overrelaxation [1, 2]: A band shortening occurs followed by a complete plastification of the fibres. A tentative mechanism of the process is discussed in terms of spontaneous rearrangement of calcium myosinate packing in thick filaments that follows disrupting of rigor crossbridges with thin filaments under the action of ATP. Released calcium myosinate heads fail to form "active" bridges with actin; thick filaments undergo a conformational change resulted in their shattening due to increase in the equilibrium region of LMM tail overlap. The effects do not depend on ionic strength only: on replacing CaCl2 by KCl at equal ionic strength 0.2, an addition of ATP induces normal contraction instead of overrelaxation. A possibility is discussed that in a living muscle overrelaxation could provide a siding to prevent damage in case of emergency.     

Covalent modification of G-actin by pyridoxal 5'-phosphate: polymerization properties and interaction with DNase I and myosin subfragment 1.

Pyridoxal 5'-phosphate (PLP), a lysine-specific reagent, has been used to modify G-actin. At pH 7.5, PLP reacted with 1.7-2 lysines on G-actin. Limited proteolytic digestion experiments indicated that, in agreement with previous works, essentially lysine-61 was modified in a 1:1 fashion by PLP, other lysines being much less reactive. A PLP-derivatized affinity label of ATP binding sites, AMPPLP, reacted with two additional lysines that do not appear to be located in the ATP site on G-actin. PLP-G-actin did not polymerize spontaneously up to 30 microM; however, it retained other essential native properties of G-actin. PLP-actin bound to the barbed ends of actin filaments with an equilibrium dissociation constant of 4 microM and prevented dilution-induced depolymerization like a capping protein. PLP-actin copolymerized with unmodified actin. The stability of F-actin copolymers decreased with the fraction of PLP-actin incorporated, consistent with a model within which the actin-PLP-actin interactions in the copolymer are 50-fold weaker, and PLP-actin-PLP-actin interactions are 200-fold weaker than regular actin-actin interactions. PLP-actin bound DNase I with an equilibrium association constant of 2 nM-1, i.e., 10-fold lower than that of unmodified actin. PLP modification did not affect the binding of G-actin to myosin subfragment 1. However, polymerization of PLP-actin by myosin subfragment 1 was not observed in low ionic strength buffers, whereas PLP-F-actin-S1 filaments, in which the stoichiometry PLP-actin:S1 is 1:1, were formed with an apparent critical concentration of 4.5 microM in the presence of 0.1 M KCl.     

Transformation of actin-encapsulating liposomes induced by cytochalasin D.

Liposomes encapsulating actin filaments were prepared by swelling at 0 degrees C lipid film consisting of a mixture of dimyristoyl phosphatidylcholine and cardiolipin (equal amounts by weight) in 100 microM rabbit skeletal muscle actin and 0.5 mM CaCl2 followed by polymerization of actin at 30 degrees C. Liposomes initially assumed either disk or dumbbell shape, but when cytochalasin D was added to the medium surrounding the liposomes, they were found to become spindle shaped. Liposomes containing bovine serum albumin that were given cytochalasin D and actin-containing liposomes that were given dimethylformamide, the solvent for cytochalasin D, did not transform. These results indicated actin-cytochalasin interaction is involved in the transformation process. Falling-ball viscometry and sedimentation analysis of actin solution indicated that cytochalasin cleaved actin filaments and caused depolymerization. The observation of polarized fluorescence of encapsulated actin labeled with acrylodan indicated that the actin filaments in the transformed liposomes aligned along the long axis of the liposomes. Because the actin filaments in the disk- or dumbbell-shaped liposomes formed bundles running along the liposome contour, the transformation was likely to be accompanied by the change in the actin filament arrangement in the liposomes, which was induced by actin-cytochalasin interaction.     

Dynamics of nuclear actin bundle induction by dimethyl sulfoxide and factors affecting its development

We have reported in a previous paper that dimethyl sulfoxide (DMSO) induces the formation of huge bundles of actin filaments in the nuclei of Dictyostelium mucoroides. The present study was performed to provide electron microscope data on the induction of nuclear actin bundles, illustrating both their formation and their reversion, as well as on the effects of various factors on the induction. The large nuclear bundles of actin appeared after 20--30 min of treatment with 10% DMSO. A DMSO concentration of 5 or 10% was optimal for the induction of the bundles. The nuclear actin bundle reverted to the original morphology within 5 min after removing DMSO. Induction of nuclear actin bundles was inhibited by Mg++ and low temperatures, but not by Na+, K+, Ca++, ATP, 3'5'-cyclic adenosine monophosphate (cAMP), phosphate buffer, or cytochalasin B. Neither NaN3 nor cycloheximide totally inhibited the induction of the bundles.