Site-specific cleavage of DNA by E. coli DNA gyrase.

E. coli DNA gyrase, which catalyzes the supercoiling of DNA, cleaves DNA site-specifically when oxolinic acid and sodium dodecylsulfate are added to the reaction. We studied the structure of the gyrasecleaved DNA because of its implications for the reaction mechanism and biological role of gyrase. Gyrase made a staggered cut, creating DNA termini with a free 3' hydroxyl and a 5' extension that provided a template primer for DNA polymerase. The cleaved DNA was resistant to labeling with T4 polynucleotide kinase even after treatment with proteinase K. Thus the denatured enzyme that remains attached to cleaved DNA is covalently bonded to both 5' terminal extensions. The 5' extensions of many gyrase cleavage fragments from phi X174, SV40 and Col E1 DNA were partially sequenced using repair with E. coli DNA polymerase I. No unique sequence existed within the cohesive ends, but G was the predominant first base incorporated by DNA polymerase I. The cohesive and sequences of four gyrase sites were determined, and they demonstrated a four base 5' extension. The dinucleotide TG, straddling the gyrase cut on one DNA strand, provided the only common bases within a 100 bp region surrounding the cleavage sites. Analysis of other cleavage fragments showed that cutting between a TG doublet is common to most, or all, gyrase cleavages. Other bases common to some of the sequenced sites were clustered nonrandomly around the TG doublet, and may be variable components of the cleavage sequence. This diverse recognition sequence with common elements is a pattern shared with several other specific nucleic acid-protein interactions.     

Lethal effect of lambda DNA terminase in recombination deficient Escherichia coli

Summary DNA terminase is the enzyme that catalyses the cleavage of DNA concatemers into genome-size molecules and packages them into the capsid. The cleavage (DNA maturation) takes place in a specific site in the phage DNA called cos. Either one of two Escherichia coli proteins, integration host factor (IHF) and terminase host factor (THF), is required, in addition to terminase, for maturation of wild-type DNA in vitro. In vivo, at least some cos cleavage is known to occur in mutants that are unable to synthesize active IHF. No THF-defective mutants have yet been isolated. In order to determine if IHF, THF or any other host protein is involved in DNA maturation in vivo, I devised a selection for host mutants that are unable to support cos cleavage. The selection is based on the assumption that DNA terminase will kill cells by cleaving chromosomally located cos sites. I found that DNA terminase will indeed kill cells provided that they contain a chromosomal cos site and provided also that they are defective in the host recA or recB genes. These two genes are required for certain pathways of genetic recombination and repair of damaged DNA, and I suggest that they prevent terminase-induced killing by repairing broken chromosomes. Interstingly, mutation in a related host gene, recD, did not render cells susceptible to terminase killing. recD and recB both encode subunits of exonuclease V, but recD mutants, unlike recB, remain proficient in genetic recombination and repair. I found mutants that survived the lethal effect of terminase in cos-containing E. coli recA at a frequency of about 5×10^-5. About 90% of these survivors were defective in terminase synthesis, and the rest were defective in IHF function. This result suggests that in the absence of IHF in vivo cos cleavage decreases to a level that permits repair of the damage, and therefore survival, even in recombination deficient cells. The absence of mutations in any other host gene suggests that IHF is the major accessory factor in DNA maturation in vivo. Alternatively, or in addition, mutations in other accessory factors are lethal.Abbreviations gp gene product: e.g. gpA, product of gene A - () prophage state - [] plasmid-carrier state     

The control of lambda DNA terminase synthesis.

Nu1 and A, the genes coding for bacteriophage lambda DNA terminase, rank among the most poorly translated genes expressed in E. coli. To understand the reason for this low level of translation the genes were cloned into plasmids and their expression measured. In addition, the wild type DNA sequences immediately preceding the genes were reduced and modified. It was found that the elements that control translation are contained in the 100 base pairs upstream from the initiation codon. Interchanging these upstream sequences with those of an efficiently translated gene dramatically increased the translation of terminase subunits. It seems unlikely that the rare codons present in the genes, and any feature of their mRNA secondary structure play a role in the control of their translation. The elimination of cos from plasmids containing Nu1 and A also resulted in an increase in terminase production. This result suggests a role for cos in the control of late gene expression. The terminase subunit overproducer strains are potentially very useful for the design of improved DNA packaging and cosmid mapping techniques.     

Analysis of cosmids using linearization by phage lambda terminase

A group of cosmid clones was isolated from the region of the mouse t complex and analysed by a rapid restriction mapping protocol based on linearization of circular cosmid DNA in vitro. A plasmid capable of producing high levels of phage λ terminase was constructed and procedures for in vitro cleavage of cosmid DNAs were optimised. After linearization, the cosmids were partially digested' with restriction enzymes, and either cos end was labelled by hybridization with radioactive oligos complementary to the cohesive end sequence, a step which we have described previously for clones in phage λ (Rackwitz et al., 1984). High-resolution restriction maps derived by this method were used to identify and align the cosmids, to localise the position of repetitive sequences, and to interpret the results of electron microscopy heteroduplex experiments.     

Following cell-fate in E. coli after infection by phage lambda

The system comprising bacteriophage (phage) lambda and the bacterium E. coli has long served as a paradigm for cell-fate determination. Following the simultaneous infection of the cell by a number of phages, one of two pathways is chosen: lytic (virulent) or lysogenic (dormant). We recently developed a method for fluorescently labeling individual phages, and were able to examine the post-infection decision in real-time under the microscope, at the level of individual phages and cells. Here, we describe the full procedure for performing the infection experiments described in our earlier work. This includes the creation of fluorescent phages, infection of the cells, imaging under the microscope and data analysis. The fluorescent phage is a "hybrid", co-expressing wild- type and YFP-fusion versions of the capsid gpD protein. A crude phage lysate is first obtained by inducing a lysogen of the gpD-EYFP (Enhanced Yellow Fluorescent Protein) phage, harboring a plasmid expressing wild type gpD. A series of purification steps are then performed, followed by DAPI-labeling and imaging under the microscope. This is done in order to verify the uniformity, DNA packaging efficiency, fluorescence signal and structural stability of the phage stock. The initial adsorption of phages to bacteria is performed on ice, then followed by a short incubation at 35°C to trigger viral DNA injection. The phage/bacteria mixture is then moved to the surface of a thin nutrient agar slab, covered with a coverslip and imaged under an epifluorescence microscope. The post-infection process is followed for 4 hr, at 10 min interval. Multiple stage positions are tracked such that ~100 cell infections can be traced in a single experiment. At each position and time point, images are acquired in the phase-contrast and red and green fluorescent channels. The phase-contrast image is used later for automated cell recognition while the fluorescent channels are used to characterize the infection outcome: production of new fluorescent phages (green) followed by cell lysis, or expression of lysogeny factors (red) followed by resumed cell growth and division. The acquired time-lapse movies are processed using a combination of manual and automated methods. Data analysis results in the identification of infection parameters for each infection event (e.g. number and positions of infecting phages) as well as infection outcome (lysis/lysogeny). Additional parameters can be extracted if desired.     

The Nu1 subunit of bacteriophage lambda terminase

The maturation and packaging of bacteriophage lambda DNA are catalyzed by the phage terminase enzyme. Terminase is composed of two protein subunits, gpNu1 and gpA. The holoenzyme is multifunctional in vitro; it binds to and cleaves lambda DNA at the cos site (where cos represents cohesive-end site), packages DNA into lambda proheads, and is also a DNA-dependent ATPase. The genes of the two subunits have been cloned separately into powerful expression vectors which allow for very high levels of protein overproduction. The gpNu1 protein has been purified to homogeneity and has a monomeric molecular weight of 21,200, in close agreement with the Mr of 20,444 expected from its amino acid sequence. Both gel filtration and sedimentation velocity centrifugation indicate that the native gpNu1 protein exists as a Mr greater than 500,000 aggregate. The sequence of the first 20 amino acids and the overall composition both match those predicted by the nucleotide sequence of the Nu1 gene. Purified gpNu1 is able to complement gpA-containing extracts in both lambda DNA packaging and cos cleavage assays. The Nu1 gene amino acid sequence predicts DNA binding by the protein, and gpNu1 does show specific binding to lambda DNA by filter binding assays. Also, as predicted from its sequence, gpNu1 exhibits ATPase activity; but in contrast to the holoenzyme, this activity is DNA-independent.     

A bacterial protein requirement for the bacteriophage lambda terminase reaction.

The bacteriophage lambda terminase enzyme cleaves the cohesive-end sites of lambda DNA to yield the protruding 5'-termini of the mature molecule. In vitro, this endonucleolytic event requires a protein factor which has been isolated and purified from extracts of uninfected E. coli. The terminase host factor (THF) is a heat stable basic protein of M.W. approximately 22,000. The integration host factor (IHF) protein of E. coli can efficiently substitute for THF in the terminase reaction; however, THF can be demonstrated to be physically present in, and isolated with full biological activity from extracts of cells defective or deficient in IHF.     

The bacteriophage lambda terminase. Partial purification and preliminary characterization of properties

The maturation of bacteriophage lambda DNA and its packaging into preformed heads to produce infectious phage is under the control of the two leftmost genes on the lambda chromosome, i.e., Nu1 and A. Based on its ability to complement lambda A- phage-infected cell extracts for packaging of lambda DNA in vitro, a single protein, designated terminase (ter) has been extensively purified using adsorption, ion exchange, and affinity column chromatography. The final preparation represents an approximately 60,000-fold purification over the activity found in crude extracts and is about 30 to 80% homogeneous as judged by visualizing the protein after electrophoresis in sodium dodecyl sulfate-polyacrylamide gel. In addition to packaging, terminase can also catalyze the endonucleolytic cleavage of lambda cohesive-end site DNA; both of these reactions require ATP. In some preparations, certain terminase fractions of extreme purity require protein factors present in extracts of uninfected Escherichia coli in order to catalyze the cohesive-end site cleavage reaction. On ion exchange columns purified terminase co-chromatographs with a DNA-dependent ATPase activity, hydrolyzing ATP to ADP and Pi in the presence of any of several types of DNA tested including those of non-lambda origin. The molecular weight of the native enzyme is 117,000 and appears to be a hetero-oligomer composed of 2 nonidentical subunits. The most likely composition of terminase is one gpA (gene product of A), Mr = 74,000 and two gpNu1, Mr = 21,000.     

Isolation and characterization of mutations in the bacteriophage lambda terminase genes.

The terminase enzyme of bacteriophage lambda is a hetero-oligomeric protein which catalyzes the site-specific endonucleolytic cleavage of lambda DNA and its packaging into phage proheads; it is composed of the products of the lambda Nul and A genes. We have developed a simple method to select mutations in the terminase genes carried on a high-copy-number plasmid, based on the ability of wild-type terminase to kill recA strains of Escherichia coli. Sixty-three different spontaneous mutations and 13 linker insertion mutations were isolated by this method and analyzed. Extracts of cells transformed by mutant plasmids displayed variable degrees of reduction in the activity of one or both terminase subunits as assayed by in vitro lambda DNA packaging. A method of genetically mapping plasmid-borne mutations in the A gene by measuring their ability to rescue various lambda Aam phages showed that the A mutations were fairly evenly distributed across the gene. Mutant A genes were also subcloned into overproducing plasmid constructs, and it was determined that more than half of them directed the synthesis of normal amounts of full-length A protein. Three of the A gene mutants displayed dramatically reduced in vitro packaging activity only when immature (uncut) lambda DNA was used as the substrate; therefore, these mutations may lie in the endonuclease domain of terminase. Interestingly, the putative endonuclease mutations mapped in two distinct locations in the A gene separated by a least 400 bp.     

Multiply branched replicative intermediates in E. coli and bacteriophage lambda

Summary Multiple branched DNA fragments present in a fast sedimenting complex comprising a minute fraction of the E. coli genome have been isolated. Similar structures were also observed among bacteriophage DNA replicative intermediates after infection of synchronized E. coli cells. These structures were found to be associated with the amino acid and thymidine starvation steps required for synchronization and originate either by initiation from secondary sites or by snap-back of daughter strands containing substantial single stranded regions in the vicinity of the growing point.     

A functional domain of bacteriophage lambda terminase for prohead binding

Terminase is a multifunctional protein complex involved in DNA packaging during bacteriophage lambda assembly. Terminase is made of gpNul and gpA, the products of the phage lambda Nu1 and A genes. Early during DNA packaging terminase binds to lambda DNA to form a complex called complex I. Terminase is required for the binding of proheads by complex I to form a DNA: terminase: prohead complex known as complex II. Terminase remains associated with the DNA during encapsidation. The other known role for terminase in packaging is the production of staggered nicks in the DNA thereby generating the cohesive ends. Lambdoid phage 21 has cohesive ends identical to those of lambda. The head genes of lambda and 21 show partial sequence homology and are analogous in structure, function and position. The terminases of lambda and 21 are not interchangeable. At least two actions of terminase are involved in this specificity: (1) DNA binding; (2) prohead binding. The 1 and 2 genes at the left end of the 21 chromosome were identified as coding for the 21 terminase. gp1 and gp2 are analogous to gpNu1 and gpA, respectively. We have isolated a phage, lambda-21 hybrid 33, which is the product of a crossover between lambda and 21 within the terminase genes. Lambda-21 hybrid 33 DNA and terminase have phage 21 packaging specificity, as determined by complementation and helper packaging studies. The terminase of lambda-21 hybrid 33 requires lambda proheads for packaging. We have determined the position at which the crossover between lambda DNA and 21 DNA occurred to produce the hybrid phage. Lambda-21 hybrid 33 carries the phage 21 1 gene and a hybrid phage 2/A gene. Sequencing of lambda-21 hybrid 33 DNA shows that it encodes a protein that is homologous at the carboxy terminus with the 38 amino acids of the carboxy terminus of lambda gpA; the remainder of the protein is homologous to gp2. The results of these studies define a specificity domain for prohead binding at the carboxy terminus of gpA.     

The terminase of bacteriophage lambda. Functional domains for cosB binding and multimer assembly

Terminase is a protein complex involved in lambda DNA packaging. The subunits of terminase, gpNul and gpA, are the products of genes Nul and A. The actions of terminase include DNA binding, prohead binding and DNA nicking. Phage 21 is a lambdoid phage that also makes a terminase, encoded by genes 1 and 2. The terminases of 21 and lambda are not interchangeable. This specificity involves two actions of terminase; DNA binding and prohead binding. In addition, the subunits of lambda terminase will not form functional multimers with the subunits of 21 terminase. lambda-21 hybrid phages can be produced as a result of recombination. We describe here lambda-21 hybrid phages that have hybrid terminase genes. The packaging specificities of the hybrids and the structure of their genes were compared in order to identify functional domains of terminase. The packaging specificities were determined in vivo by complementation tests and helper packaging experiments. Restriction enzyme site mapping and sequencing located the sites at which recombination occurred to produce the hybrid phages. lambda-21 hybrid 51 carries the lambda A gene, and a hybrid 1/Nul gene. The crossover that produced this phage occurred near the middle of the 1 and Nul genes. The amino-terminal portion of the hybrid protein is homologous to gp1 and the carboxy-terminal portion is homologous to gpNul. It binds to 21 DNA and forms functional multimers with gpA, providing evidence that the amino-terminal portion of gpNul is involved in DNA binding and the carboxy-terminal portion of gpNul is involved in the interaction with gpA. lambda-21 hybrid 54 has a hybrid 2/A gene. The amino terminus of the hybrid protein of lambda-21 hybrid 54 is homologous with gp2. This protein forms functional multimers only with gp1, providing evidence that the amino terminus of gpA is involved in the interaction with gpNul. These studies identify three functional domains of terminase.     

A secondary attachment site for bacteriophage lambda in trpC of E. coli.

We have determined the nucleotide sequence of a secondary lambda attachment site in trpC. Direct sequence analysis of lambdatrp transducing phage DNA fragments carrying the two prophage attachment sites reveals a 6 nucleotide homology in the crossover region which is a subset of the 15 nucleotide core sequence in the primary lambda attachment site: GCTTTTTTATACTAA. This 6 nucleotide sequence is also present in the intact trpC genome at the attachment site, as shown by analysis of trpC mRNA spanning this region.     

Site-specific endonucleolytic cleavages and the regulation of stability of E. coli ompA mRNA

The stability of ompA mRNA is growth-rate dependent. We show that the 5' noncoding region of this mRNA provides a target for site-specific endonucleases. The rate of degradation of ompA mRNA parallels the rate of these endonucleolytic cleavages, implying that endonucleolytic rather than exonucleolytic attack is the initial step in ompA mRNA degradation. Thus the 5' noncoding region appears to be a determinant of mRNA stability, and endonucleolytic cleavages in the 5' noncoding region may well regulate expression of the ompA gene.