Changes in pyrophosphatase activity during the de novo mineralization associated with cartilage and bone formation

Pyrophosphatase was extracted from implants undergoing de novo mineralization in an in vivo model of matrix-induced endochondral bone formation. Before the onset of the mineralization of the plaques and after the mineralization process had been completed only one form of pyrophosphatase activity was observed. During the active deposition of calcium phosphate, however, a new, higher molecular weight form of pyrophosphatase activity was produced suggesting that this enzyme activity is associated with biological mineralization. This observation gives support to the earlier suggestion that inhibitors of calcium phosphate precipitation, such as pyrophosphate, must be removed from the site of mineralization before calcification can occur. This high-molecular-weight activity also appears to be associated with alkaline and/or acid phosphatase activity as determined by molecular exclusion chromatography.     

Comparative in vitro study regarding the biocompatibility of titanium-base composites infiltrated with hydroxyapatite or silicatitanate

Background

The development of novel biomaterials able to control cell activities and direct their fate is warranted for engineering functional bone tissues. Adding bioactive materials can improve new bone formation and better osseointegration. Three types of titanium (Ti) implants were tested for in vitro biocompatibility in this comparative study: Ti6Al7Nb implants with 25% total porosity used as controls, implants infiltrated using a sol–gel method with hydroxyapatite (Ti HA) and silicatitanate (Ti SiO₂). The behavior of human osteoblasts was observed in terms of adhesion, cell growth and differentiation.

Results

The two coating methods have provided different morphological and chemical properties (SEM and EDX analysis). Cell attachment in the first hour was slower on the Ti HA scaffolds when compared to Ti SiO₂ and porous uncoated Ti implants. The Alamar blue test and the assessment of total protein content uncovered a peak of metabolic activity at day 8–9 with an advantage for Ti SiO₂ implants. Osteoblast differentiation and de novo mineralization, evaluated by osteopontin (OP) expression (ELISA and immnocytochemistry), alkaline phosphatase (ALP) activity, calcium deposition (alizarin red), collagen synthesis (SIRCOL test and immnocytochemical staining) and osteocalcin (OC) expression, highlighted the higher osteoconductive ability of Ti HA implants. Higher soluble collagen levels were found for cells cultured in simple osteogenic differentiation medium on control Ti and Ti SiO₂ implants. Osteocalcin (OC), a marker of terminal osteoblastic differentiation, was most strongly expressed in osteoblasts cultivated on Ti SiO₂ implants.

Conclusions

The behavior of osteoblasts depends on the type of implant and culture conditions. Ti SiO₂ scaffolds sustain osteoblast adhesion and promote differentiation with increased collagen and non-collagenic proteins (OP and OC) production. Ti HA implants have a lower ability to induce cell adhesion and proliferation but an increased capacity to induce early mineralization. Addition of growth factors BMP-2 and TGFβ1 in differentiation medium did not improve the mineralization process. Both types of infiltrates have their advantages and limitations, which can be exploited depending on local conditions of bone lesions that have to be repaired. These limitations can also be offset through methods of functionalization with biomolecules involved in osteogenesis.

     

FORMATION OF BONE TISSUE IN CULTURE FROM ISOLATED BONE CELLS

A system is described for the formation of bone tissue in culture from isolated rat bone cells. The isolated bone cells were obtained from embryonic rat calvarium and periosteum or from traumatized, lifted periosteum of young rats. The cells were cultured for a period of up to 8 wk, during which time the morphological, biochemical, and functional properties of the cultures were studied. Formation of bone tissue by these isolated bone cells was shown, in that the cells demonstrated osteoblastic morphology in light and electron microscopy, the collagen formed was similar to bone collagen, there was mineralization specific for bone, and the cells reacted to the hormone calcitonin by increased calcium ion uptake. Calcification of the fine structure of the cells and the matrix is described. Three stages in the calcification process were observed by electron microscopy. It is concluded that these bone cells growing in vitro are able to function in a way similar to such cells in vivo. This tissue culture system starting from isolated bone cells is therefore suitable for studies on the structure and function of bone.     

冲击波诱导人骨髓基质细胞体内成骨研究

为了研究冲击波(SW)诱导人骨髓基质细胞(hMSCs)在动物体内成骨作用,根据前期工作结果,应用适宜能量冲击波(10kV,500次)处理体外培养的hMSCs,将SW组和对照组hMSCs与羟基磷灰石(HA)载体复合后体外培养2周,应用扫描电镜(SEM)检测细胞在载体表面的生长情况.将hMSCs-HA载体复合体植入裸鼠皮下,分别于术后4周、8周取材进行组织学、四环素荧光标记、SEM观察、碱性磷酸酶测定、RT-PCR检测骨钙素mRNA表达.结果表明,SW组及对照组细胞与HA载体体外复合后生长良好,且SW组细胞分泌较多的细胞基质;细胞载体复合体植入动物体内后,SW组载体表面有类骨组织形成,而对照组HA载体表面无骨组织形成;SW组与对照组的hMSCs-HA载体复合体碱性磷酸酶表达有显著性差异(P<0.01);SW组hMSCs-HA载体复合体术后4周与8周表达骨钙素mRNA,而对照组则无表达.提示hMSCs经适宜能量冲击波作用后与HA载体复合植入裸鼠体内具有成骨作用,适宜能量的冲击波作为一种新的促进hMSCs成骨分化的方法,可应用于组织工程领域.     

Implementation of contact definitions calculated by FEA to describe the healing process of basal implants

Aims: Bone structure around basal implants shows a dual healing mode: direct contact areas manifest primary osteonal remodeling, in the void osteotomy-induced spaces, the repair begins with woven bone formation. This woven bone is later converted into osteonal bone. The purpose of this study was to develop a model to accurately represent the interface between bone and basal implant throughout the healing process. The model was applied to the biological scenario of changing load distribution in a basal implant system over time. Methods: Computations were made through finite element analysis using multiple models with changing boneimplant contact definitions which reflected the dynamic nature of the interface throughout the bony healing process. Five stages of bony healing were calculated taking into account the changes in mineral content of bone in the vicinity of the load transmitting implant surfaces. Results: As the bony integration of basal implants proceeds during healing, peak stresses within the metal structure shift geographically. While bony repair may still weaken osteonal bone, woven bone has already matured. This leads to changes in the load distribution between and within the direct contact areas, and bone areas which make later contact with implant. Conclusions: This study shows that basal implants undergo an intrinsic shift of maximum stress regions during osseointegration. Fatigue testing methods in the case of basal implants must therefore take into account this gradual shift from early healing phase until full osseointegration is achieved.     

Rapid de novo centromere formation occurs independently of heterochromatin protein 1 in C. elegans embryos

DNA injected into the Caenorhabditis elegans germline forms extrachromosomal arrays that segregate during cell division [1, 2]. The mechanisms underlying array formation and segregation are not known. Here, we show that extrachromosomal arrays form de novo centromeres at high frequency, providing unique access to a process that occurs with extremely low frequency in other systems [3-8]. De novo centromerized arrays recruit centromeric chromatin and kinetochore proteins and autonomously segregate on the spindle. Live imaging following DNA injection revealed that arrays form after oocyte fertilization via homologous recombination and nonhomologous end-joining. Individual arrays gradually transition from passive inheritance to active segregation during the early embryonic divisions. The heterochromatin protein 1 (HP1) family proteins HPL-1 and HPL-2 are dispensable for de novo centromerization even though arrays become strongly enriched for the heterochromatin-associated H3K9me3 modification over time. Partial inhibition of HP1 family proteins accelerates the acquisition of segregation competence. In addition to reporting the first direct visualization of new centromere formation in living cells, these findings reveal that naked DNA rapidly builds de novo centromeres in C. elegans embryos in an HP1-independent manner and suggest that, rather than being a prerequisite, HP1-dependent heterochromatin antagonizes de novo centromerization.     

Immunohistochemical studies of the extracellular matrix in the condylar cartilage of the human fetal mandible: collagens and noncollagenous proteins.

This study provides data concerning the cells and their extracellular matrix in prenatal human mandibular condylar cartilage. The latter cartilage represents a secondary type of cartilage since it develops late in the morphogenesis of the craniofacial skeleton. The cartilage of the mandibular condyle is actively involved in endochondral ossification, thus showing all the phases of cartilage growth, maturation, and mineralization that precedes de novo bone formation. The present study focused on the localization and distribution of the major macromolecules that are normally encountered in cartilage and bone, including collagens, proteoglycans, fibronectin, osteonectin, osteocalcin, alkaline phosphatase, and anchorin CII. It became clear that the mineralized zone of the cartilage already contained bone-specific antigens; thus the above zone might serve as an essential propagative predecessor in the ossification process.     

Proteome analysis of matrix vesicles isolated from femurs of chicken embryo

Matrix vesicles (MVs) are extracellular organelles that initiate mineral formation, accumulating inorganic phosphate (P(i)) and calcium leading to the formation of hydroxyapatite (HA) crystals, the main mineral component of bones. MVs are produced during bone formation, as well as during the endochondral calcification of cartilage. MVs are released into the extracellular matrix from osseous cells such as osteoblasts and hypertrophic chondrocytes. In this report, using 1-D SDS-PAGE, in-gel tryptic digestion and an LC-MS-MS/MS protein identification protocol, we characterized the proteome of MVs isolated from chicken embryo (Gallus gallus) bones and cartilage. We identified 126 gene products, including proteins related to the extracellular matrix and ion transport, as well as enzymes, cytoskeletal, and regulatory proteins. Among the proteins recognized for the first time in MVs were aquaporin 1, annexin A1 (AnxA1), AnxA11, glycoprotein HT7, G(i) protein alpha2, and scavenger receptor type B. The pathways for targeting the identified proteins into MVs and their particular functions in the biomineralization process are discussed. Obtaining a knowledge of the functions and roles of these proteins during embryonic mineralization is a prerequisite for the overall understanding of the initial mineral formation mechanisms.     

Transformation of fetal secondary cartilage into embryonic bone in organ cultures of human mandibular condyles

Mandibular condyles of human fetuses, 14–21 weeks in utero, were kept in an organ culture system for up to 60 days. After 6 days in culture, the cartilage of the mandibular condyle appeared to have maintained its inherent structural characteristics, including all its various layers: chondroprogenitor, chondroblastic, and hypertrophic. After 12 days in culture, no chondroblasts could be seen; instead, the entire cartilage was occupied by hypertrophic chondrocytes. At the same time, the mesenchymal cells in the vicinity of the chondroprogenitor zone differentiated into osteoblast-like cells that produced type I collagen. The progenitor cells were still actively incorporating ³H-thymidine. The newly formed osteoid-like tissue lacked both metachromatic reactivity and a response to antibodies against chondroitin sulfate. Instead, the tissue reacted positively for osteocalcin (bone gla-protein). The process of new bone formation further progressed and, by the 20th day in culture, the new bone reacted positively for type I collagen, osteonectin, and to a lesser extent for chondroitin sulfate. The osteoid also underwent mineralization as revealed by both the von Kossa stain and vital staining with tetracycline. The above feature appeared even more intense in 40-day-old cultures. After 60 days, the newly formed bone contained osteoblasts and osteocytes, whereas the extracellular matrix revealed a high degree of matrix polarization. The results of the present study recapitulate findings reported for organ cultures of mice mandibular condyles. However, the in vitro process of de novo bone formation in human specimens requires a 6-fold longer culture time than that needed for mice condyles.     

Evaluation of an in vivo heterotopic model of osteogenic differentiation of equine bone marrow and muscle mesenchymal stem cells in fibrin glue scaffold

Autologous mesenchymal stem cells (MSCs) have been used as a potential cell-based therapy in various animal and human diseases. Their differentiation capacity makes them useful as a novel strategy in the treatment of tissue injury in which the healing process is compromised or delayed. In horses, bone healing is slow, taking a minimum of 6–12 months. The osteogenic capacity of equine bone marrow and muscle MSCs mixed with fibrin glue or phosphate-buffered saline (PBS) as a scaffold is assessed. Bone production by the following groups was compared: Group 1, bone marrow (BM) MSCs in fibrin glue; Group 2, muscle (M) MSCs in fibrin glue; Group 3, BM MSCs in PBS; Group 4, M MSCs in PBS and as a control; Group 5, fibrin glue without cells. BM and M MSCs underwent osteogenic stimulation for 48 h prior to being injected intramuscularly into nude mice. After 4 weeks, the mice were killed and muscle samples were collected and evaluated for bone formation and mineralization by using radiology, histochemistry and immunohistochemistry. Positive bone formation and mineralization were confirmed in Group 1 in nude mice based on calcium deposition and the presence of osteocalcin and collagen type I; in addition, a radiopaque area was observed on radiographs. However, no evidence of mineralization or bone formation was observed in Groups 2–5. In this animal model, equine BM MSCs mixed with fibrin glue showed better osteogenic differentiation capacity compared with BM MSCs in PBS and M MSCs in either carrier.     

Soluble, insoluble and geometric signals sculpt the architecture of mineralized tissues

Bone morphogenetic and osteogenic proteins (BMPs/OPs), members of the transforming growth factor-beta (TGF-beta) superfamily, are soluble mediators of tissue morphogenesis and induce de novo endochondral bone formation in heterotopic extraskeletal sites as a recapitulation of embryonic development. In the primate Papio ursinus, the induction of bone formation has been extended to the TGF-beta isoforms per se. In the primate and in the primate only, the TGF-beta isoforms are initiators of endochondral bone formation by induction and act in a species-, site- and tissue-specific mode with robust endochondral bone induction in heterotopic sites but with limited new bone formation in orthotopic bone defects. The limited inductive capacity orthotopically of TGF-beta isoforms is associated with expression of the inhibitory Smads, Smad6 and Smad7. In primates, bone formation can also be induced using biomimetic crystalline hydroxyapatite matrices with a specific surface geometry and without the exogenous application of osteogenic proteins of the TGF-beta superfamily, even when the biomimetic matrices are implanted heterotopically in the rectus abdominis muscle. The sequence of events that directs new bone formation upon the implantation of highly crystalline biomimetic matrices initiates with vascular invasion, mesenchymal cell migration, attachment and differentiation of osteoblast-like cells attached to the substratum, expression and synthesis of osteogenic proteins of the TGF-beta superfamily resulting in the induction of bone as a secondary response. The above findings in the primate indicate enormous potential for the bioengineering industry. Of particular interest is that biomimetic matrices with intrinsic osteoinductivity would be an affordable option in the local context.     

Augmentation and repair tissue formation of the nucleus pulposus after partial nucleotomy in a rabbit model

Disc degeneration alters disc height and mechanics of the spinal column and is associated with lower back pain. In preclinical studies gel-like materials or resorbable polymer-based implants are frequently used to rebuild the nucleus pulposus, aiming at tissue regeneration and restoration of tissue function. To compare the outcome of tissue repair, freeze-dried resorbable polyglycolic acid–hyaluronan (PGA/HA) implants without any bioactive components or bioactivated fibrin (fibrin-serum) was used in a degenerated disc disease model in New Zealand white rabbits. Animals with partial nucleotomy only served as controls. The T2-weighted/fat suppression sequence signal intensity in the nuclear region of operated discs as assessed by magnet resonance imaging was reduced in operated compared to healthy discs, indicating loss of water and did not change from week 1 to month 6 after surgery. Quantification of histological and immunohistochemical staining indicated that the implantation of PGA/HA leads to significantly more repair tissue compared to nucleotomy only. Type II collagen content of the repair tissue formed after PGA/HA or fibrin-serum treatment is significantly increased compared to controls with nucleotomy only. The data indicate that intervertebral disc augmentation after nucleotomy has a positive effect on repair tissue formation and type II collagen deposition as shown in the rabbit model.     

Application of mechanoregulatory models to simulate peri-implant tissue formation in an in vivo bone chamber

Several mechanoregulatory tissue differentiation models have been proposed over the last decade. Corroboration of these models by comparison with experimental data is necessary to determine their predictive power. So far, models have been applied with various success rates to different experimental set-ups investigating mainly secondary fracture healing. In this study, the mechanoregulatory models are applied to simulate the implant osseointegration process in a repeated sampling in vivo bone chamber, placed in a rabbit tibia. This bone chamber provides a mechanically isolated environment to study tissue differentiation around titanium implants loaded in a controlled manner. For the purpose of this study, bone formation around loaded cylindrical and screw-shaped implants was investigated. Histologically, no differences were found between the two implant geometries for the global amount of bone formation in the entire chamber. However, a significantly larger amount of bone-to-implant contact was observed for the screw-shaped implant compared to the cylindrical implant. In the simulations, a larger amount of bone was also predicted to be in contact with the screw-shaped implant. However, other experimental observations could not be predicted. The simulation results showed a distribution of cartilage, fibrous tissue and (im)mature bone, depending on the mechanoregulatory model that was applied. In reality, no cartilage was observed. Adaptations to the differentiation models did not lead to a better correlation between experimentally observed and numerically predicted tissue distribution patterns. The hypothesis that the existing mechanoregulatory models were able to predict the patterns of tissue formation in the in vivo bone chamber could not be fully sustained.     

Correlative transmission and scanning electron microscopy of the initial mineralization of healing alveolar bone in rats

Primary mineralization in healing sockets after extraction of molar teeth was studied in rats. The observations obtained by scanning electron microscopy were correlated by transmission electron microscopy. The process is characterized by abundance of extracellular matrix vesicles distributed between the forming cells and the calcifying fronts. The occurrence of osmiophilic material and solitary hydroxyapatitte crystals within the vesicles was followed by accumulation of hydroxyapatite crystals, disappearance of the vesicular membrane and formation of calcospherites that conglomerate into calcified fronts. The process described here in bone healing is essentially similar to primary mineralization in other normal and pathological calcified tissues.     

Peptide-based activation of alpha5 integrin for promoting osteogenesis

Promoting osteoblastogenesis remains a major challenge in disorders characterized by defective bone formation. We recently showed that the alpha 5 integrin subunit (ITGA5) is critically involved in human mesenchymal cell osteoblast differentiation. In this study, we determined the potential of pharmacological ITGA5 activation by a synthetic cyclic peptide (GA-CRRETAWAC-GA) on murine osteoblast differentiation and function in vitro and bone formation in vivo. Peptide-mediated activation of ITGA5 in murine C3H10T1/2 mesenchymal cells resulted in the generation of the integrin-mediated cell signals FAK and ERK1/2-MAPKs. In vitro, peptide-based activation of ITGA5 protected from cell apoptosis but did not affect cell adhesion or replication, while it enhanced the expression of the osteoblast marker genes Runx2 and type I collagen and increased extracellular matrix (ECM) mineralization as also found with bone morphogenetic protein-2 (BMP2), a standard bone anabolic factor. When injected on adult mouse cranial bone for 3 weeks, the peptide-mediated activation of ITGA5 increased bone thickness by twofold, an effect also induced by BMP2. Histomorphometric analysis showed that this anabolic effect resulted from decreased cell apoptosis and increased bone forming surfaces and bone formation rate (BFR). We conclude that pharmacological activation of ITGA5 in mesenchymal cells is effective in promoting de novo bone formation as a result of increased osteoprogenitor cell differentiation into osteoblasts and increased cell protection from apoptosis. This peptide-based approach could be used therapeutically to promote the osteogenic capacity of osteoblast progenitor cells and to induce de novo bone formation in conditions where osteoblastogenesis is compromised.     

Nanoindentation measurements of biomechanical properties in mature and newly formed bone tissue surrounding an implant

The characterization of the biomechanical properties of newly formed bone tissue around implants is important to understand the osseointegration process. The objective of this study is to investigate the evolution of the hardness and indentation modulus of newly formed bone tissue as a function of healing time. To do so, a nanoindentation device is employed following a multimodality approach using histological analysis. Coin-shaped implants were placed in vivo at a distance of 200 μm from the cortical bone surface, leading to an initially empty cavity of 200 μm * 4.4 mm. Three New Zealand White rabbits were sacrificed after 4, 7, and 13 weeks of healing time. The bone samples were embedded and analyzed using histological analyses, allowing to distinguish mature and newly formed bone tissue. The bone mechanical properties were then measured in mature and newly formed bone tissue. The results are within the range of hardness and apparent Young's modulus values reported in previous literature. One-way ANOVA test revealed a significant effect of healing time on the indentation modulus (p < 0.001, F = 111.24) and hardness (p < 0.02, F = 3.47) of bone tissue. A Tukey-Kramer analysis revealed that the biomechanical properties of newly formed bone tissue (4 weeks) were significantly different from those of mature bone tissue. The comparison with the results obtained in Mathieu et al. (2011, "Micro-Brillouin Scattering Measurements in Mature and Newly Formed Bone Tissue Surrounding an Implant," J. Biomech. Eng., 133, 021006). shows that bone mass density increases by approximately 13.5% between newly formed bone (7 weeks) and mature bone tissue.     

Soluble and insoluble signals sculpt osteogenesis in angiogenesis

The basic tissue engineering paradigm is tissue induction and morphogenesis by combinatorial molecular protocols whereby soluble molecular signals are combined with insoluble signals or substrata. The insoluble signal acts as a three-dimensional scaffold for the initiation of de novo tissue induction and morphogenesis. The osteogenic soluble molecular signals of the transforming growth factor-β (TGF-β) supergene family, the bone morphogenetic/osteogenic proteins (BMPs/OPs) and, uniquely in the non-human primate Papio ursinus (P. ursinus), the three mammalian TGF-β isoforms induce bone formation as a recapitulation of embryonic development. In this paper, I discuss the pleiotropic activity of the BMPs/OPs in the non-human primate P. ursinus, the induction of bone by transitional uroepithelium, and the apparent redundancy of molecular signals initiating bone formation by induction including the three mammalian TGF-β isoforms. Amongst all mammals tested so far, the three mammalian TGF-β isoforms induce endochondral bone formation in the non-human primate P. ursinus only. Bone tissue engineering starts by erecting scaffolds of biomimetic biomaterial matrices that mimic the supramolecular assembly of the extracellular matrix of bone. The molecular scaffolding lies at the hearth of all tissue engineering strategies including the induction of bone formation. The novel concept of tissue engineering is the generation of newly formed bone by the implantation of "smart" intelligent biomimetic matrices that per se initiate the ripple-like cascade of bone differentiation by induction without exogenously applied BMPs/OPs of the TGF-β supergene family. A comprehensive digital iconographic material presents the modified tissue engineering paradigm whereby the induction of bone formation is initiated by intelligent smart biomimetic matrices that per se initiate the induction of bone formation without the exogenous application of the soluble osteogenic molecular signals. The driving force of the intrinsic induction of bone formation by bioactive biomimetic matrices is the shape of the implanted substratum. The language of shape is the language of geometry; the language of geometry is the language of a sequence of repetitive concavities, which biomimetizes the remodelling cycle of the primate osteonic bone.