Assembly of lamins in vitro

After lamins A,B and C were isolated and purified from rat liver,their assembly properties were examined by electron microscopy and scanning tunneling microscopy by electron microscopy and scanning tunneling microscopy using negative staining and the glycerol coating method,respectively.By varying the assembly time or the ionic conditions under which polymerization takes place,we have observed different stages of lamin assembly,which may provide clues on the structure of the 10 nm lamin filaments.At the first level of structural organization,two lamin polypeptides associate laterally into dimers with the two domains being parallel and in register.At the second level of structural organization,two dimers associate in a half-staggered and antiparallel fashion to form a tetramer 75 nm in length.At the third level of structural organization,4-10 lamin tetramers associate laterally in register to form 75 nm long 10nm filaments,which in turn combine head to head into long,fully assembled lamin filaments.The assembled lamin filaments are nonpolar.     

The role of the head and tail domain in lamin structure and assembly: analysis of bacterially expressed chicken lamin A and truncated B2 lamins.

Nuclear lamins like cytoplasmic intermediate filament proteins exhibit a characteristic tripartite domain structure with a segmented alpha-helical rod domain flanked by an N-terminal head and a C-terminal tail domain. To examine the influence of the head and tail domains on the structure and assembly properties of nuclear lamins, we have engineered "headless," "tailless," and "rod" chicken lamin B2 cDNAs and expressed them in Escherichia coli. A full-length chicken lamin A cDNA was also expressed in E. coli, and the recombinant protein compared with the structure and assembly properties of full-length chicken lamin B2 (E. Heitlinger et al. (1991) J. Cell Biol. 113, 485-495). As with lamin B2, at their first level of structural organization, lamin A and the headless lamin B2 formed myosin-like dimers consisting of a 51- to 52-nm-long tail flanked by two globular heads at one end. Similarly, the tailless and rod lamin B2 fragments formed tropomyosin-like dimers consisting of a 51 to 52-nm-long rod. In contrast to the lateral mode of association of cytoplasmic IF dimers into four-chain tetramers, at their second level of structural organization, lamin A dimers, just as lamin B2 dimers (E. Heitlinger et al. (1991) J. Cell Biol. 113, 485-495), associated longitudinally to form polar head-to-tail polymers. Whereas dimers made of the truncated B2 headless and rod lamins had lost their propensity to associate head-to-tail, tailless lamin B2 dimers revealed an enhanced head-to-tail association. Finally, at their third level of structural organization, rather than assembling into stable 10-nm filaments, both lamin A and the three truncated B2 lamins formed paracrystalline arrays exhibiting distinct transverse banding patterns with axial repeats of either 24 or 48-49 nm depending on the species.     

Characterization of the Head-to-Tail Overlap Complexes Formed by Human Lamin A, B1 and B2 “Half-minilamin” Dimers

Half-minilamins, representing amino- and carboxy-terminal fragments of human lamins A, B1 and B2 with a truncated central rod domain, were investigated for their ability to form distinct head-to-tail-type dimer complexes. This mode of interaction represents an essential step in the longitudinal assembly reaction exhibited by full-length lamin dimers. As determined by analytical ultracentrifugation, the amino-terminal fragments were soluble under low ionic strength conditions sedimenting with distinct profiles and s-values (1.6-1.8 S) indicating the formation of coiled-coil dimers. The smaller carboxy-terminal fragments were, except for lamin B2, largely insoluble under these conditions. However, after equimolar amounts of homotypic amino- and carboxy-terminal lamin fragments had been mixed in 4 M urea, upon subsequent renaturation the carboxy-terminal fragments were completely rescued from precipitation and distinct soluble complexes with higher s-values (2.3-2.7 S) were obtained. From this behavior, we conclude that the amino- and carboxy-terminal coiled-coil dimers interact to form distinct oligomers (i.e. tetramers). Furthermore, a corresponding interaction occurred also between heterotypic pairs of A- and B-type lamin fragments. Hence, A-type lamin dimers may interact with B-type lamin dimers head-to-tail to yield linear polymers. These findings indicate that a lamin dimer principally has the freedom for a “combinatorial” head-to-tail association with all types of lamins, a property that might be of significant importance for the assembly of the nuclear lamina. Furthermore, we suggest that the head-to-tail interaction of the rod end domains represents a principal step in the assembly of cytoplasmic intermediate filament proteins too.     

Solubility properties and specific assembly pathways of the B-type lamin from Caenorhabditis elegans

Lamins are nucleus-specific intermediate filament (IF) proteins that together with a complex set of membrane proteins form a filamentous meshwork tightly adhering to the inner nuclear membrane and being associated with the nuclear pore complexes. This so-called nuclear lamina provides mechanical stability and, in addition, has been implicated in the spatial organization of the heterochromatin. While increasing knowledge on the biological function of lamins has been obtained in recent years, the assembly mechanism of lamin filaments at the molecular level has remained largely elusive. Therefore, we have now more systematically investigated lamin assembly in vitro. Using Caenorhabditis elegans lamin, which has been reported to assemble into 10-nm filaments under low ionic strength conditions, we investigated the assembly kinetics of this protein into filaments in more detail using both His-tagged and un-tagged recombinant proteins. In particular, we have characterized distinct intermediates in the filament assembly process by analytical ultracentrifugation, electron and atomic force microscopy. In contrast to the general view that lamins assemble only slowly into filaments, we show that in vitro association reactions are extremely fast, and depending on the ionic conditions employed, significant filamentous assemblies form within seconds.     

Organization of the lamin scaffold in the internal nuclear matrix of normal and transformed hepatocytes

Nuclear lamins are among the more abundant proteins making up the internal nuclear matrix, but very little is known about their structure in the nucleoplasm. Using immunoelectron microscopy, we demonstrate the organization of lamins in the nuclear matrix isolated from rat hepatocytes for the first time. Lamin epitopes are arrayed both in locally ordered clusters and in quasi-regular rows. Fourier filtering of the images demonstrates that the epitopes are placed at the nodes and halfway between the nodes of square or rhombic lattices that are about 50 nm on each side, as well as along rows at regular ∼25-nm intervals. In addition, we have compared this structure with that of the internal nuclear matrix isolated from persistent hepatocyte nodules. In transformed hepatocytes, the islands of lamin lattice are lost, and only a partial regularity in the rows of gold particles remains. We suggest that orthogonal lattice assembly might be an intrinsic property of lamin molecules, and that the disassembly may be triggered by simple molecular events such as phosphorylation.     

Nuclear lamin proteins: common structures for paracrystalline,filamentous and lattice forms

Nuclear lamins isolated from a variety of sources and classified as Type V intermediate filament (IF) proteins form a variety of closely related filamentous or paracrystalline polymorphs. Furthermore, the nuclear lamina observed in Xenopus oocytes was shown to consist of an approximately orthogonal lattice of filaments. All of the structures observed thus far have axial periodicities of about 25 or 50 nm. In this work it is shown that the packing of the lamin molecules in both the in vivo and the in vitro assemblies can be explained in terms of a single model in which arrays of antiparallel lamin molecules are half-staggered with respect to one another. Such a scheme closely resembles that previously proposed for four-chain complexes in Types I–IV IF proteins. Higher levels of structure, however, differ significantly. A key interaction in the models of the various lamin assemblies is one occurring between similarly directed segments encompassing the highly conserved part of segment IA and that at the C-terminal end of segment 2B. Such an interaction may also prove to be of importance in IF structure.     

Computational analyses reveal spatial relationships between nuclear pore complexes and specific lamins

Nuclear lamin isoforms form fibrous meshworks associated with nuclear pore complexes (NPCs). Using datasets prepared from subpixel and segmentation analyses of 3D–structured illumination microscopy images of WT and lamin isoform knockout mouse embryo fibroblasts, we determined with high precision the spatial association of NPCs with specific lamin isoform fibers. These relationships are retained in the enlarged lamin meshworks of Lmna^−/− and Lmnb1^−/− fibroblast nuclei. Cryo-ET observations reveal that the lamin filaments composing the fibers contact the nucleoplasmic ring of NPCs. Knockdown of the ring-associated nucleoporin ELYS induces NPC clusters that exclude lamin A/C fibers but include LB1 and LB2 fibers. Knockdown of the nucleoporin TPR or NUP153 alters the arrangement of lamin fibers and NPCs. Evidence that the number of NPCs is regulated by specific lamin isoforms is presented. Overall the results demonstrate that lamin isoforms and nucleoporins act together to maintain the normal organization of lamin meshworks and NPCs within the nuclear envelope.     

Disruption of Nuclear Lamin Organization Alters the Distribution of Replication Factors and Inhibits DNA Synthesis

The nuclear lamina is a fibrous structure that lies at the interface between the nuclear envelope and the nucleoplasm. The major proteins comprising the lamina, the nuclear lamins, are also found in foci in the nucleoplasm, distinct from the peripheral lamina. The nuclear lamins have been associated with a number of processes in the nucleus, including DNA replication. To further characterize the specific role of lamins in DNA replication, we have used a truncated human lamin as a dominant negative mutant to perturb lamin organization. This protein disrupts the lamin organization of nuclei when microinjected into mammalian cells and also disrupts the lamin organization of in vitro assembled nuclei when added to Xenopus laevis interphase egg extracts. In both cases, the lamina appears to be completely absent, and instead the endogenous lamins and the mutant lamin protein are found in nucleoplasmic aggregates. Coincident with the disruption of lamin organization, there is a dramatic reduction in DNA replication. As a consequence of this disruption, the distributions of PCNA and the large subunit of the RFC complex, proteins required for the elongation phase of DNA replication, are altered such that they are found within the intranucleoplasmic lamin aggregates. In contrast, the distribution of XMCM3, XORC2, and DNA polymerase α, proteins required for the initiation stage of DNA replication, remains unaltered. The data presented demonstrate that the nuclear lamins may be required for the elongation phase of DNA replication.     

Structural organization of nuclear lamins A,C, B1, and B2 revealed by superresolution microscopy

The nuclear lamina is a key structural element of the metazoan nucleus. However, the structural organization of the major proteins composing the lamina is poorly defined. Using three-dimensional structured illumination microscopy and computational image analysis, we characterized the supramolecular structures of lamin A, C, B1, and B2 in mouse embryo fibroblast nuclei. Each isoform forms a distinct fiber meshwork, with comparable physical characteristics with respect to mesh edge length, mesh face area and shape, and edge connectivity to form faces. Some differences were found in face areas among isoforms due to variation in the edge lengths and number of edges per face, suggesting that each meshwork has somewhat unique assembly characteristics. In fibroblasts null for the expression of either lamins A/C or lamin B1, the remaining lamin meshworks are altered compared with the lamin meshworks in wild-type nuclei or nuclei lacking lamin B2. Nuclei lacking LA/C exhibit slightly enlarged meshwork faces and some shape changes, whereas LB1-deficient nuclei exhibit primarily a substantial increase in face area. These studies demonstrate that individual lamin isoforms assemble into complex networks within the nuclear lamina and that A- and B-type lamins have distinct roles in maintaining the organization of the nuclear lamina.     

In vitro assembly properties of mutant and chimeric intermediate filament proteins: insight into the function of sequences in the rod and end domains of IF

The factors and mechanisms regulating assembly of intermediate filament (IF) proteins to produce filaments with their characteristic 10 nm diameter are not fully understood. All IF proteins contain a central rod domain flanked by variable head and tail domains. To elucidate the role that different domains of IF proteins play in filament assembly, we used negative staining and electron microscopy (EM) to study the in vitro assembly properties of purified bacterially expressed IF proteins, in which specific domains of the proteins were either mutated or swapped between a cytoplasmic (mouse neurofilament-light (NF-L) subunit) and nuclear intermediate filament protein (human lamin A). Our results indicate that filament formation is profoundly influenced by the composition of the assembly buffer. Wild type (wt) mouse NF-L formed 10 nm filaments in assembly buffer containing 175 mM NaCl, whereas a mutant deleted of 18 NH2-terminal amino acids failed to assemble under similar conditions. Instead, the mutant assembled efficiently in buffers containing CaCl2 > or = 6 mM forming filaments that were 10 times longer than those formed by wt NF-L, although their diameter was significantly smaller (6-7 nm). These results suggest that the 18 NH2-terminal sequence of NF-L might serve two functions, to inhibit filament elongation and to promote lateral association of NF-L subunits. We also demonstrate that lengthening of the NF-L rod domain, by inserting a 42 aa sequence unique to nuclear IF proteins, does not compromise filament assembly in any noticeable way. Our results suggests that the known inability of nuclear lamin proteins to assemble into 10 nm filaments in vitro cannot derive solely from their longer rod domain. Finally, we demonstrate that the head domain of lamin A can substitute for that of NF-L in filament assembly, whereas substitution of both the head and tail domains of lamins for those of NF-L compromises assembly. Therefore, the effect of lamin A "tail" domain alone, or the synergistic effect of lamin "head" and the "tail" domains together, interferes with assembly into 10-nm filaments.     

Concentration-dependent Effects of Nuclear Lamins on Nuclear Size in Xenopus and Mammalian Cells

A fundamental question in cell biology concerns the regulation of organelle size. While nuclear size is exquisitely controlled in different cell types, inappropriate nuclear enlargement is used to diagnose and stage cancer. Clarifying the functional significance of nuclear size necessitates an understanding of the mechanisms and proteins that control nuclear size. One structural component implicated in the regulation of nuclear morphology is the nuclear lamina, a meshwork of intermediate lamin filaments that lines the inner nuclear membrane. However, there has not been a systematic investigation of how the level and type of lamin expression influences nuclear size, in part due to difficulties in precisely controlling lamin expression levels in vivo. In this study, we circumvent this limitation by studying nuclei in Xenopus laevis egg and embryo extracts, open biochemical systems that allow for precise manipulation of lamin levels by the addition of recombinant proteins. We find that nuclear growth and size are sensitive to the levels of nuclear lamins, with low and high concentrations increasing and decreasing nuclear size, respectively. Interestingly, each type of lamin that we tested (lamins B1, B2, B3, and A) similarly affected nuclear size whether added alone or in combination, suggesting that total lamin concentration, and not lamin type, is more critical to determining nuclear size. Furthermore, we show that altering lamin levels in vivo, both in Xenopus embryos and mammalian tissue culture cells, also impacts nuclear size. These results have implications for normal development and carcinogenesis where both nuclear size and lamin expression levels change.     

Desmin and Vimentin Intermediate Filament Networks: Their Viscoelastic Properties Investigated by Mechanical Rheometry

We have investigated the viscoelastic properties of the cytoplasmic intermediate filament (IF) proteins desmin and vimentin. Mechanical measurements were supported by time-dependent electron microscopy studies of the assembly process under similar conditions. Network formation starts within 2 min, but it takes more than 30 min until equilibrium mechanical network strength is reached. Filament bundling is more pronounced for desmin than for vimentin. Desmin filaments (persistence length l_p ≈ 900 nm) are stiffer than vimentin filaments (l_p ≈ 400 nm), but both IFs are much more flexible than microfilaments. The concentration dependence of the plateau modulus G₀ ∼ c^α is much weaker than predicted theoretically for networks of semiflexible filaments. This is more pronounced for vimentin (α = 0.47) than for desmin (α = 0.70). Both networks exhibit strain stiffening at large shear deformations. At the transition from linear to nonlinear viscoelastic response, only desmin shows characteristics of nonaffine network deformation. Strain stiffening and the maximum modulus occur at strain amplitudes about an order of magnitude larger than those for microfilaments. This is probably attributable to axial slippage within the tetramer building blocks of the IFs. Network deformation beyond a critical strain γ_max results in irreversible damage. Strain stiffening sets in at lower concentrations, is more pronounced, and is less sensitive to ionic strength for desmin than for vimentin. Hence, desmin exhibits strain stiffening even at low-salt concentrations, which is not observed for vimentin, and we conclude that the strength of electrostatic repulsion compared to the strength of attractive interactions forming the network junctions is significantly weaker for desmin than for vimentin filaments. These findings indicate that both IFs exhibit distinct mechanical properties that are adapted to their respective cellular surroundings [i.e., myocytes (desmin) and fibroblasts (vimentin)].     

Near-UV Circular Dichroism Reveals Structural Transitions of Vimentin Subunits during Intermediate Filament Assembly

In vitro assembly of vimentin intermediate filaments (IFs) proceeds from soluble, reconstituted tetrameric complexes to mature filaments in three distinct stages: (1) within the first seconds after initiation of assembly, tetramers laterally associate into unit-length filaments (ULFs), on average 17 nm wide; (2) for the next few minutes, ULFs grow by longitudinal annealing into short, immature filaments; (3) almost concomitant with elongation, these immature filaments begin to radially compact, yielding ∼ 11-nm-wide IFs at around 15 min. The near-UV CD signal of soluble tetramers exhibits two main peaks at 285 and 278 nm, which do not change during ULF formation. In contrast, the CD signal of mature IFs exhibits two major changes: (1) the 278-nm band, denoting the transition of the tyrosines from the ground state to the first vibrational mode of the excited state, is lost; (2) a red-shifted band appears at 291 nm, indicating the emergence of a new electronic species. These changes take place independently and at different time scales. The 278-nm signal disappears within the first minute of assembly, compatible with increased rigidity of the tyrosines during elongation of the ULFs. The rise of the 291-nm band has a lifetime of ∼ 13 min and denotes the generation of phenolates by deprotonation of the tyrosines' hydroxyl group after they relocalize into a negatively charged environment. The appearance of such tyrosine-binding “pockets” in the assembling filaments highlights an essential part of the molecular rearrangements characterizing the later stages of the assembly process, including the radial compaction.     

A Highlights from MBoC Selection: Systematic identification of pathological lamin A interactors

Laminopathies are a collection of phenotypically diverse diseases that include muscular dystrophies, cardiomyopathies, lipodystrophies, and premature aging syndromes. Laminopathies are caused by >300 distinct mutations in the LMNA gene, which encodes the nuclear intermediate filament proteins lamin A and C, two major architectural elements of the mammalian cell nucleus. The genotype–phenotype relationship and the basis for the pronounced tissue specificity of laminopathies are poorly understood. Here we seek to identify on a global scale lamin A–binding partners whose interaction is affected by disease-relevant LMNA mutations. In a screen of a human genome–wide ORFeome library, we identified and validated 337 lamin A–binding proteins. Testing them against 89 known lamin A disease mutations identified 50 disease-associated interactors. Association of progerin, the lamin A isoform responsible for the premature aging disorder Hutchinson–Gilford progeria syndrome, with its partners was largely mediated by farnesylation. Mapping of the interaction sites on lamin A identified the immunoglobulin G (IgG)–like domain as an interaction hotspot and demonstrated that lamin A variants, which destabilize the Ig-like domain, affect protein–protein interactions more globally than mutations of surface residues. Analysis of a set of LMNA mutations in a single residue, which result in three phenotypically distinct diseases, identified disease-specific interactors. The results represent a systematic map of disease-relevant lamin A interactors and suggest loss of tissue-specific lamin A interactions as a mechanism for the tissue-specific appearance of laminopathic phenotypes.     

Polymeric Structures and Dynamic Properties of the Bacterial Actin AlfA

AlfA is a recently discovered DNA segregation protein from Bacillus subtilis that is distantly related to actin and the bacterial actin homologues ParM and MreB. Here we show that AlfA mostly forms helical 7/3 filaments, with a repeat of about 180 Å, that are arranged in three-dimensional bundles. Other polymorphic structures in the form of two-dimensional rafts or paracrystalline nets were also observed. Here AlfA adopted a 16/7 helical symmetry, with a repeat of about 387 Å. Thin polymers consisting of several intertwining filaments also formed. Observed helical symmetries of AlfA filaments differed from those of other members of the actin family: F-actin, ParM, or MreB. Both ATP and guanosine 5′-triphosphate are able to promote rapid AlfA filament formation with almost equal efficiencies. The helical structure is only preserved under physiological salt concentrations and at a pH between 6.4 and 7.4, the physiological range of the cytoplasm of B. subtilis. Polymerization kinetics are extremely rapid and compatible with a cooperative assembly mechanism requiring only two steps: monomer activation followed by elongation, making AlfA one of the most efficient polymerizing motors within the actin family. Phosphate release lags behind polymerization, and time-lapse total internal reflection fluorescence images of AlfA bundles are consistent with treadmilling rather than dynamic microtubule-like instability. High-pressure small angle X-ray scattering experiments reveal that the stability of AlfA filaments is intermediate between the stability of ParM and the stability of F-actin. These results emphasize that actin-like polymerizing machineries have diverged to produce a variety of filament geometries with diverse properties that are tailored for specific biological processes.     

Filaments assembly of ectopically expressed Caenorhabditis elegans lamin within Xenopus oocytes

Lamins are the major components of the nuclear lamina, a filamentous layer underlying the inner nuclear membrane and attached to the peripheral chromatin. Lamins are required for maintaining nuclear shape and are involved in most nuclear activities. Here, we studied the 3D organization of the nuclear lamina formed upon the expression of Caenorhabditis elegans lamin (Ce-lamin) within the nucleus of a Xenopus laevis oocyte. We show that Ce-lamin forms an intricate 3D meshwork of 5-6 nm lamin protofilaments. The diverse protofilament interactions and organization may shed light upon the unique mechano-elastic properties of the nuclear lamina scaffold supporting the nuclear envelope. The Q159K Hutchinson-Gilford Progeria Syndrome-linked mutation alters interactions between protofilaments within the lamina, leading to the formation of more bundled arrays of less isotropically-oriented protofilaments. Using this system, we show for the first time the organization of lamin proteins that were translated and assembled within the environment of a living cell.     

Structural Analysis of a Metazoan Nuclear Pore Complex Reveals a Fused Concentric Ring Architecture

The sole gateway for molecular exchange between the cytoplasm and the nucleus is the nuclear pore complex (NPC). This large supramolecular assembly mediates transport of cargo into and out of the nucleus and fuse the inner and outer nuclear membranes to form an aqueous translocation channel. The NPC is composed of eight proteinaceous asymmetric units forming a pseudo-8-fold symmetric passage. Due to its shear size, complexity, and plastic nature, dissecting the high-resolution three-dimensional structure of the NPC in its hydrated state is a formidable challenge. Toward this goal, we applied cryo-electron tomography to spread nuclear envelopes from Xenopus oocytes. To compensate for perturbations of the 8-fold symmetry of individual NPCs, we performed symmetry-independent asymmetric unit averaging of three-dimensional tomographic NPC volumes to eventually yield a refined model at 6.4 nm resolution. This approach revealed novel structural features, particularly in the spoke-ring complex and luminal domains. Fused concentric ring architecture of the spoke-ring complex was found along the translocation channel. Additionally, a comparison of the refined Xenopus model to that of its Dictyostelium homologue yielded similar pore diameters at the level of the three canonical rings, although the Xenopus NPC was found to be 30% taller than the Dictyostelium pore. This discrepancy is attributed primarily to the relatively low homology and different organization of some nucleoporins in the Dictyostelium genome as compared to that of vertebrates. Nevertheless, the experimental conditions impose a preferred axial orientation of the NPCs within spread Xenopus oocyte nuclear envelopes. This may at least in part explain the increased height of the reconstructed vertebrate NPCs compared to those obtained from tomographic reconstruction of intact Dictyostelium nuclei.