Activity of E. coli ClpA bound by nucleoside diphosphates and triphosphates

The Escherichia coli ClpA protein is a molecular chaperone that binds and translocates protein substrates into the proteolytic cavity of the tetradecameric serine protease ClpP. In the absence of ClpP, ClpA can remodel protein complexes. In order for ClpA to bind protein substrates targeted for removal or remodeling, ClpA requires nucleoside triphosphate binding to first assemble into a hexamer. Here we report the assembly properties of ClpA in the presence of the nucleoside diphosphates and triphosphates ADP, adenosine 5′-[γ-thio]triphosphate, adenosine 5′-(β,γ-imido)triphosphate, β,γ-methyleneadenosine 5′-triphosphate, and adenosine diphosphate beryllium fluoride. In addition to examining the assembly of ClpA in the presence of various nucleotides and nucleotide analogues, we have also correlated the assembly state of ClpA in the presence of these nucleotides with both polypeptide binding activity and enzymatic activity, specifically ClpA-catalyzed polypeptide translocation. Here we show that all of the selected nucleotides, including ADP, promote the assembly of ClpA. However, only adenosine 5′-[γ-thio]triphosphate and adenosine 5′-(β,γ-imido)triphosphate promote the formation of an oligomer of ClpA that is active in polypeptide binding and translocation. These results suggest that the presence of γ phosphate may serve to switch ClpA into a conformational state with high peptide binding activity, whereas affinity is severely attenuated when ADP is bound.     

Nucleotide-dependent displacement and dynamics of the α-1 helix in kinesin revealed by site-directed spin labeling EPR

In kinesin X-ray crystal structures, the N-terminal region of the α-1 helix is adjacent to the adenine ring of the bound nucleotide, while the C-terminal region of the helix is near the neck-linker (NL). Here, we monitor the displacement of the α-1 helix within a kinesin monomer bound to microtubules (MTs) in the presence or absence of nucleotides using site-directed spin labeling EPR. Kinesin was doubly spin-labeled at the α-1 and α-2 helices, and the resulting EPR spectrum showed dipolar broadening. The inter-helix distance distribution showed that 20% of the spins have a peak characteristic of 1.4–1.7 nm separation, which is similar to what is predicted from the X-ray crystal structure, albeit 80% were beyond the sensitivity limit (>2.5 nm) of the method. Upon MT binding, the fraction of kinesin exhibiting an inter-helix distance of 1.4–1.7 nm in the presence of AMPPNP (a non-hydrolysable ATP analog) and ADP was 20% and 25%, respectively. In the absence of nucleotide, this fraction increased to 40–50%. These nucleotide-induced changes in the fraction of kinesin undergoing displacement of the α-1 helix were found to be related to the fraction in which the NL undocked from the motor core. It is therefore suggested that a shift in the α-1 helix conformational equilibrium occurs upon nucleotide binding and release, and this shift controls NL docking onto the motor core.     

Stimulation of protocollagen proline hydroxylase activity by nucleoside triphosphates.

Activity of purified protocollagen proline hydroxylase was enhanced several fold by addition of nucleoside triphosphates (3 mM) to the assay medium, but nucleoside mono-and diphosphates were almost inactive. Pyrimidine nucleotides were less effective compared with purine nucleotides, among which GTP was the most effective. dATP and ATP analogues such as adenosine 5′-(β,γ-imino) triphosphate (AMP-PNP), adenosine 5′-(β,γ-methylene) triphosphate (AMP-PCP), etc. were inactive. ATP or GTP showed no additive effect on enzyme activity stimulated by dithiothreitol or bovine serum albumin.     

Dynamic affinity chromatography of heavy meromyosin subfragment-1

Heavy meromyosin subfragment-1 and its trinitrophenylated derivative 3ave been chromatographed on immobilized ATP, ADP and adenosine 5′-(β,γ-imino)triphosphate affinity chromatography columns, in the presence and in the absence of Mg²⁺ or Ca²⁺. Splitting of bound ATP was followed by using [γ-^{3 2}P]ATP columns. While the divalent cations had little effect on the chromatographic pattern in the case of the non-hydrolyzable ADP and adenosine 5′(β,γ-imino)triphosphate, they catalyzed splitting in the case of ATP and at the same time strongly increased the affinity of adsorption of the proteins. The protein-elution and the P_i-release patterns were different for the native and the modified proteins. These results have been interpreted in terms of protein binding to the various intermediates of the ATP hydrolysis reaction.     

ESR reveals the mobility of the neck linker in dimeric kinesin

Conventional kinesin is a highly processive motor that converts the chemical energy of ATP hydrolysis into the unidirectional motility along microtubules. The processivity is thought to depend on the coordination between ATPase cycles of two motor domains and their neck linkers. Here we have used site-directed spin labeling electron spin resonance (SDSL-ESR) to determine the conformation of the neck linker in kinesin dimer in the presence and absence of microtubules. The spectra show that the neck linkers co-exist in both docked and disordered conformations, which is consistent with the results of monomeric kinesin. In all nucleotide states, however, the neck linkers are well ordered when dimeric kinesin is bound to the microtubule. This result suggests that the orientation of each neck linker that is fixed rigidly controls the kinesin motion along microtubule tracks.     

Distances between the b-subunits in the tether domain of F0F1-ATP synthase from E. coli

The arrangement of the b-subunits in the holo-enzyme F₀F₁-ATP synthase from E. coli is investigated by site-directed mutagenesis spin-label EPR. F₀F₁-ATP synthases couple proton translocation with the synthesis of ATP from ADP and phosphate. The hydrophilic F₁-part and the hydrophobic membrane-integrated F₀-part are connected by a central and a peripheral stalk. The peripheral stalk consists of two b-subunits. Cysteine mutations are introduced in the tether domain of the b-subunit at b-40, b-51, b-53, b-62 or b-64 and labeled with a nitroxide spin label. Conventional (9 GHz), high-field (95 GHz) and pulsed EPR spectroscopy reveal: All residues are in a relatively polar environment, with mobilities consistent with helix sites. The distance between the spin labels at each b-subunit is 2.9 nm in each mutant, revealing a parallel arrangement of the two helices. They can be in-register but separated by a large distance (1.9 nm), or at close contact and displaced along the helix axes by maximally 2.7 nm, which excludes an in-register coiled-coil model suggested previously for the b-subunit. Binding of the non-hydrolysable nucleotide AMPPNP to the spin-labeled enzyme had no significant influence on the distances compared to that in the absence of nucleotides.     

A unique mode of microtubule stabilization induced by peloruside A

Microtubules are significant therapeutic targets for the treatment of cancer, where suppression of microtubule dynamicity by drugs such as paclitaxel forms the basis of clinical efficacy. Peloruside A, a macrolide isolated from New Zealand marine sponge Mycale hentscheli, is a microtubule-stabilizing agent that synergizes with taxoid drugs through a unique site and is an attractive lead compound in the development of combination therapies. We report here unique allosteric properties of microtubule stabilization via peloruside A and present a structural model of the peloruside-binding site. Using a strategy involving comparative hydrogen-deuterium exchange mass spectrometry of different microtubule-stabilizing agents, we suggest that taxoid-site ligands epothilone A and docetaxel stabilize microtubules primarily through improved longitudinal interactions centered on the interdimer interface, with no observable contributions from lateral interactions between protofilaments. The mode by which peloruside A achieves microtubule stabilization also involves the interdimer interface, but includes contributions from the α/β-tubulin intradimer interface and protofilament contacts, both in the form of destabilizations. Using data-directed molecular docking simulations, we propose that peloruside A binds within a pocket on the exterior of β-tubulin at a previously unknown ligand site, rather than on α-tubulin as suggested in earlier studies.     

Kinesin-5: Cross-bridging mechanism to targeted clinical therapy

Kinesin motor proteins comprise an ATPase superfamily that works hand in hand with microtubules in every eukaryote. The mitotic kinesins, by virtue of their potential therapeutic role in cancerous cells, have been a major focus of research for the past 28 years since the discovery of the canonical Kinesin-1 heavy chain. Perhaps the simplest player in mitotic spindle assembly, Kinesin-5 (also known as Kif11, Eg5, or kinesin spindle protein, KSP) is a plus-end-directed motor localized to interpolar spindle microtubules and to the spindle poles. Comprised of a homotetramer complex, its function primarily is to slide anti-parallel microtubules apart from one another. Based on multi-faceted analyses of this motor from numerous laboratories over the years, we have learned a great deal about the function of this motor at the atomic level for catalysis and as an integrated element of the cytoskeleton. These data have, in turn, informed the function of motile kinesins on the whole, as well as spearheaded integrative models of the mitotic apparatus in particular and regulation of the microtubule cytoskeleton in general. We review what is known about how this nanomotor works, its place inside the cytoskeleton of cells, and its small-molecule inhibitors that provide a toolbox for understanding motor function and for anticancer treatment in the clinic.     

Kinesin passing permanent blockages along its protofilament track

During movement along microtubules, kinesin usually follows a track parallel to the axis of a single protofilament. The question arises what happens when kinesin encounters blockages. The present study describes the movement of kinesin labeled by 20-nm gold beads along immobilized microtubules artificially decorated with blocking proteins. To guarantee that exactly the kinesin-binding sites were occupied and to avoid steric effects exerted by large molecules, the KIF5A motor domain was used for blocking. After binding, the blockages were irreversibly cross-linked to the microtubules to make them non-exchangeable. Under such conditions, kinesin movement became a non-continuous one. As a rule, after temporary stopping the kinesin moved on without being released from the microtubule. The results strongly suggest a bypassing mechanism based on the postulation that kinesin changes to and continues movement along a neighbouring protofilament. Bypassing is considered to ensure an efficient long-distance transport of cellular cargoes by kinesins.     

Hyperpolization-activated Ca channels in guard cell plasma membrane are involved in extracellular ATP-promoted stomatal opening in Vicia faba

Extracellular ATP (eATP) plays essential roles in plant growth, development, and stress tolerance. Extracellular ATP-regulated stomatal movement of Arabidopsis thaliana has been reported. Here, ATP was found to promote stomatal opening of Vicia faba in a dose-dependent manner. Three weakly hydrolysable ATP analogs (adenosine 5′-O-(3-thio) triphosphate (ATPγS), 3′-O-(4-benzoyl) benzoyl adenosine 5′-triphosphate (Bz-ATP) and 2-methylthio-adenosine 5′-triphosphate (2meATP)) showed similar effects, indicating that ATP acts as a signal molecule rather than an energy charger. ADP promoted stomatal opening, while AMP and adenosine did not affect stomatal movement. An ATP-promoted stomatal opening was blocked by the NADPH oxidase inhibitor diphenylene iodonium (DPI), the reductant dithiothreitol (DTT) or the Ca²⁺ channel blockers GdCl₃ and LaCl₃. A hyperpolarization-activated Ca²⁺ channel was detected in plasma membrane of guard cell protoplast. Extracellular ATP and weakly hydrolyzable ATP analogs activated this Ca²⁺ channel significantly. Extracellular ATP-promoted Ca²⁺ channel activation was markedly inhibited by DPI or DTT. These results indicated that eATP may promote stomatal opening via reactive oxygen species that regulate guard cell plasma membrane Ca²⁺ channels.     

Kinesin steps do not alternate in size

Kinesin is a two-headed motor protein that transports cargo inside cells by moving stepwise on microtubules. Its exact trajectory along the microtubule is unknown: alternative pathway models predict either uniform 8-nm steps or alternating 7- and 9-nm steps. By analyzing single-molecule stepping traces from “limping” kinesin molecules, we were able to distinguish alternate fast- and slow-phase steps and thereby to calculate the step sizes associated with the motions of each of the two heads. We also compiled step distances from nonlimping kinesin molecules and compared these distributions against models predicting uniform or alternating step sizes. In both cases, we find that kinesin takes uniform 8-nm steps, a result that strongly constrains the allowed models.     

Crystallographic studies on multiple conformational states of active-site loops in pyrrolysyl-tRNA synthetase

Pyrrolysine, a lysine derivative with a bulky pyrroline ring, is the “22nd” genetically encoded amino acid. In the present study, the carboxy-terminal catalytic fragment of Methanosarcina mazei pyrrolysyl-tRNA synthetase (PylRS) was analyzed by X-ray crystallography and site-directed mutagenesis. The catalytic fragment ligated tRNA^Pyl with pyrrolysine nearly as efficiently as the full-length PylRS. We determined the crystal structures of the PylRS catalytic fragment in the substrate-free, ATP analogue (AMPPNP)-bound, and AMPPNP/pyrrolysine-bound forms, and compared them with the previously-reported PylRS structures. The ordering loop and the motif-2 loop undergo conformational changes from the “open” states to the “closed” states upon AMPPNP binding. On the other hand, the β7-β8 hairpin exhibits multiple conformational states, the open, intermediate (β7-open/β8-open and β7-closed/β8-open), and closed states, which are not induced upon substrate binding. The PylRS structures with a docked tRNA suggest that the active-site pocket can accommodate the CCA terminus of tRNA when the motif-2 loop is in the closed state and the β7-β8 hairpin is in the open or intermediate state. The entrance of the active-site pocket is nearly closed in the closed state of the β7-β8 hairpin, which may protect the pyrrolysyladenylate intermediate in the absence of tRNA^Pyl. Moreover, a structure-based mutational analysis revealed that hydrophobic residues in the amino acid-binding tunnel are important for accommodating the pyrrolysine side chain and that Asn346 is essential for anchoring the side-chain carbonyl and α-amino groups of pyrrolysine. In addition, a docking model of PylRS with tRNA was constructed based on the aspartyl-tRNA synthetase/tRNA structure, and was confirmed by a mutational analysis.     

Cytoskeleton-membrane interactions in the cnidocil complex of hydrozoan nematocytes

Summary Each cnidocil complex of the hydrozoans Tubularia larynx and Hydra vulgaris consists of 9 or 7–10 large stereovilli (=stereocilia), respectively, and a modified cilium, the cnidocil. The cnidocils comprise the regular 9 microtubule doublets, up to 30 additional microtubules, as well as a central filament body. Adjacent stereovilli are linked together by intermembrane connectors forming the stereovillar cone. The distal tips of the stereovilli surround the cnidocil in a closed tubular arrangement measuring up to 0.7 m in length. Within this contact region the cnidocil is linked to the stereovillar tube by another set of intermembrane connectors, which seem to hold the cnidocil in a central position within the stereovillar cone. Stereovillar membrane and actin core are linked by 16-nm long cross bridges, which display a periodicity of 16 nm and emerge from the actin core. Within the cnidocils periodically arranged membrane-cytoskeleton bridges are uniformly restricted to the contact region. Here, 24-nm long cross bridges, which are spaced by a regular distance of 20 nm, interconnect the A-tubules of the microtubule doublets and the membrane. The cnidociliary membrane is differentiated into distinct domains as revealed by freeze-fracturing. Within the contact region of the nematocytes of Tubularia larynx, intramembrane particles are arranged in 9 rows of 700 nm length and 50 nm width, separated by particlefree areas. Intramembrane particles are irregularly distributed distal to the contact region. Considering recent physiological results we presume that the latter represent chemoreceptor units, while mechanical stimuli are transmitted via the intermembrane connectors and the microtubule-membrane bridges to mechanosensitive channels within the domain of the cnidociliary membrane in the contact region.     

Kinesin follows the microtubule's protofilament axis

We tested the hypothesis that kinesin moves parallel to the microtubule's protofilament axis. We polymerized microtubules with protofilaments that ran either parallel to the microtubule's long axis or that ran along shallow helical paths around the cylindrical surface of the microtubule. When gliding across a kinesin-coated surface, the former microtubules did not rotate. The latter microtubules, those with supertwisted protofilaments, did rotate; the pitch and handedness of the rotation accorded with the supertwist measured by electron cryo- microscopy. The results show that kinesin follows a path parallel to the protofilaments with high fidelity. This implies that the distance between consecutive kinesin-binding sites along the microtubule must be an integral multiple of 4.1 nm, the tubulin monomer spacing along the protofilament, or a multiple of 8.2 nm, the dimer spacing.     

Purification and properties of galactokinase from Tetrahymena thermophila

Galactokinase (EC 2.7.1.6; ATP: d-galactose-1-phosphototransferase) was purified 152-fold with an 11% yield from Tetrahymena thermophila maximally derepressed for enzyme synthesis in late stationary phase. The purification procedure utilized sequential acid precipitation, batch DEAE-Sephacel chromatography, differential ammonium sulfate precipitation and narrow range electrofocusing. The apparent molecular weight of the holoenzyme as determined by gel filtration on Sephadex G-200 is 50 000-55 000. The holoenzyme consists of two subunits of approx. 28 000 daltons each, as determined by SDS-polyacrylamide gel electrophoresis. The native enzyme appears to be a single species with an isoelectric point at pH 5.1 Optimal activity was obtained at pH 7.8 and 41°C, with no added monovalent salt. d-Galactose, 2-deoxygalactose and galactosamine all are suitable carbohydrate substrates for the stereospecific galactokinase; only substitution at the C-2 position of galactose retains enzyme recognition. The enzyme utilizes ATP, 2′-dATP and 3′-dATP as phosphate donors; ADP and adenosine-5′-[γ-thio]triphosphate are inhibitory. The K_m values for galactose and ATP were determined to be 0.60 mM and 0.15 mM, respectively. The enzyme requires a divalent cation for activity, with effectiveness being in the order: Mg²⁺ >Co²⁺ >Mn²⁺ >Fe²⁺. Galactokinases from all eucaryotic sources studied thus far seem to be very similar. Based upon the results reported here, the galactokinases from Tetrahymena and yeast appear to be most similar in their biophysical and biochemical properties.     

Multiple global conformational states of the hexameric RepA helicase of plasmid RSF1010 with different ssDNA-binding capabilities are induced by different numbers of bound nucleotides. Analytical ultracentrifugation and dynamic light scattering studies

Global conformational transitions of the hexameric RepA helicase of plasmid RSF1010, induced by the nucleoside tri and di-phosphate binding, have been examined using analytical ultracentrifugation and dynamic light scattering techniques. The global structure of the RepA hexamer in solution, modeled as an oblate ellipsoid of revolution, is very different from its crystal structure, with the axial ratio of the ellipsoid being ∼4.5 as compared to only ∼2.4 in the crystal structure. The large axial ratio and the experimentally determined partial specific volume strongly suggest that, in solution, the diameter of the cross-channel of the hexamer is larger than ∼17 Å seen in the crystal. The global conformation of the helicase is modulated by a specific number of bound nucleotides. The enzyme exists in at least four conformational states, occurring sequentially as a function of the number of bound cofactors. These conformational states are different for ADP, as compared to β,γ-imidoadenosine 5′-triphosphate (AMP-PNP). Modulation of the global structure is separated into two phases, different for complexes with up to three bound nucleotides, from the effect observed at the saturating level of cofactors. This heterogeneity indicates different functional roles of the two modulation processes. Nucleotide control of helicase - single-stranded (ss)DNA interactions occurs through affecting the enzyme structure and the ssDNA affinity prior to DNA binding. Only one conformational state of the helicase, with two AMP-PNP molecules bound, has dramatically higher ssDNA-affinities than the complexes with ADP. Moreover the same state also has an increased site-size of the enzyme - ssDNA complexes. The implications of these findings for functional activities of a hexameric helicase are discussed.     

Backstepping Mechanism of Kinesin-1

Kinesin-1 is an ATP-driven molecular motor that transports cellular cargo along microtubules. At low loads, kinesin-1 almost always steps forward, toward microtubule plus ends, but at higher loads, it can also step backward. Backsteps are usually 8 nm but can be larger. These larger backward events of 16 nm, 24 nm, or more are thought to be slips rather than steps because they are too fast to consist of multiple, tightly coupled 8-nm steps. Here, we propose that not only these larger backsteps, but all kinesin-1 backsteps, are slips. We show first that kinesin waits before forward steps for less time than before backsteps and detachments; second, we show that kinesin waits for the same amount of time before backsteps and detachments; and third, we show that by varying the microtubule type, we can change the ratio of backsteps to detachments without affecting forward stepping. Our findings indicate that backsteps and detachments originate from the same state and that this state arises later in the mechanochemical cycle than the state that gives rise to forward steps. To explain our data, we propose that, in each cycle of ATP turnover, forward kinesin steps can only occur before Pi release, whereas backslips and detachments can only occur after Pi release. In the scheme we propose, Pi release gates access to a weak binding K⋅ADP-K⋅ADP state that can slip back along the microtubule, re-engage, release ADP, and try again to take an ATP-driven forward step. We predict that this rescued detachment pathway is key to maintaining kinesin processivity under load.     

Structures of the Ca-ATPase complexes with ATP, AMPPCP and AMPPNP. An FTIR study

We studied binding of ATP and of the ATP analogs adenosine 5′-(β,γ-methylene)triphosphate (AMPCP) and β,γ-imidoadenosine 5′-triphosphate (AMPPNP) to the Ca²⁺-ATPase of the sarcoplasmic reticulum membrane (SERCA1a) with time-resolved infrared spectroscopy. In our experiments, ATP reacted with ATPase which had AMPPCP or AMPPNP bound. These experiments monitored exchange of ATP analog by ATP and phosphorylation to the first phosphoenzyme intermediate Ca₂E1P. These reactions were triggered by the release of ATP from caged ATP. Only small differences in infrared absorption were observed between the ATP complex and the complexes with AMPPCP and AMPPNP indicating that overall the interactions between nucleotide and ATPase are similar and that all complexes adopt a closed conformation. The spectral differences between ATP and AMPPCP complex were more pronounced at high Ca²⁺ concentration (10 mM). They are likely due to a different position of the γ-phosphate which affects the β-sheet in the P domain.