Effects of nanoparticles on the compatibility of PEO-PMMA block copolymers

The compatibility of six kinds of designed poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) copolymers was studied at 270, 298 and 400 K via mesoscopic modeling. The values of the order parameters depended on both the structures of the block copolymers and the simulation temperature, while the values of the order parameters of the long chains were higher than those of the short ones; temperature had a more obvious effect on long chains than on the short ones. Plain copolymers doped with poly(ethylene oxide) (PEO) or poly(methyl methacrylate) (PMMA) homopolymer showed different order parameter values. When a triblock copolymer had the same component at both ends and was doped with one of its component polymers as a homopolymer (such as A5B6A5 doped with B6 or A5 homopolymer), the value of its order parameter depended on the simulation temperature. The highest order parameter values were observed for A5B6A5 doped with B6 at 400 K and for A5B6A5 doped with A5 at 270 K. A study of copolymers doped with nanoparticles showed that the mesoscopic phase was influenced by not only the properties of the nanoparticles, such as the size and density, but also the compositions of the copolymers. Increasing the size of the nanoparticles used as a dopant had the most significant effect on the phase morphologies of the copolymers.     

Computer modelling study on the compatibility of PEO–PMMA block copolymers

The compatibility of six kinds of designed poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) copolymers was studied at 270, 298 and 400 K by mesoscopic modelling. The values of order parameter depended on both the structures of block copolymers and the simulation temperatures, while the values of order parameter of the long chains were higher than those of the short ones; temperature showed a more obvious effect on long chains than on short ones. These plain copolymers doped with PEO or PMMA homopolymer showed different order parameter values. When the triblock copolymer was composed of the same component at both ends and was doped with a homopolymer with the same component as that in the middle or the end of triblock copolymer, the values of order parameter depended on the simulation temperature, such as A5B6A5 doped with B6 at 400 K and A5B6A5 doped with A5 at 270 K, it showed the highest order parameter values. The study of copolymers doped with nanoparticles showed that the mesoscopic phase was influenced by not only the properties of the nanoparticles, such as the size and density, but also the compositions of copolymers. Among them, increasing the size of doped nanoparticles was the most significant effect on changing the phase morphologies.     

Characterization of function and activity of domains A, B and C of xylanase C from Fibrobacter succinogenes S85

Xylanase C from the ruminant bacterium Fibrobacter succinogenes is comprised of two catalytic domains, A and B, and a third domain, C, of unknown function. The DNA coding for domains A and B of xylanase C were separately cloned and expressed in Escherichia coli as fusion proteins with glutathione-S:-transferase. The fusion proteins were isolated by affinity chromatography on glutathione-Sepharose 4B, cleaved with thrombin and the released xylanase C catalytic domains A and B were purified to apparent homogeneity by anion-exchange chromatography on Mono Q. Electrospray mass spectrometry provided a molecular mass of 27 818 Da (expected, 27 820 Da) for domain B. The pH and temperature optima for activity of domain B on oat spelt xylan were 5.0 and 52 degrees C, respectively. A kinetic analysis of the activity of the catalytic domain A on oat spelt xylan, birch wood xylan and xylooligomers at pH 6.5 and 37 degrees C provided data significantly different to those obtained previously with a protease-derived form of the enzyme [Zhu et al. (1994) J. Bacteriol. 176, 3885-3894]. The isolated domain A was more active on barley-glucan than the protease-derived form and its affinity for birch wood xylan was enhanced resulting in greater overall catalytic efficiency as reflected by k(cat)/K:(M) values. Likewise, significant differences in the Michaelis-Menten parameters K:(M), k(cat) and k(cat)/K:(M) were obtained with domain B compared with values previously reported with this domain attached to domain C. In general, the presence of domain C appeared to decrease the overall efficiency of domain B 7- and 36-fold with birch wood xylan and xylopentaose as substrates, respectively, as reflected by values of k(cat)/K:(M). The removal of domain C also affected the mode of action of domain B such that it more closely resembled that of catalytic domain A. However, no change in either pH and temperature optima or stability were found with domain B compared with the combined domains B and C. The function of domain C remains unknown, but hydrophobic cluster analysis indicated that it may belong to a class of dockerin domains involved in the protein-protein interactions of cellulolytic and xylanolytic complexes.     

Bacteriorhodopsin in model membranes. A new component of the displacement photocurrent in the microsecond time scale.

A quasi-short-circuit (tunable voltage clamp) measurement method with microsecond time resolution was applied to a bacteriorhodopsin model membrane formed by a novel interfacial technique. A new component (B1) of the displacement photocurrent was recorded: it has no detectable latency at an instrumental time constant of 1.5 museconds, and persists at 5 degrees C. In addition, a slower component (B2) of opposite polarity inhibited by low temperature (5 degrees C) and low pH (pH = 3.0) was recorded. The technique is very sensitive for the study of fast capacitative photoresponses in model membranes, and allows the detection of charge displacements in bacteriorhodopsin associated with distinct stages of the photochemical transformation.     

Justicidin B 7-hydroxylase, a cytochrome P450 monooxygenase from cell cultures of Linum perenne Himmelszelt involved in the biosynthesis of diphyllin

Cell suspension cultures of Linum perenne L. Himmelszelt accumulate justicidin B as the main component together with glycosides of 7-hydroxyjusticidin B (diphyllin). A hypothetical biosynthetic pathway for these compounds is suggested. Justicidin B 7-hydroxylase (JusB7H) catalyzes the last step in the biosynthesis of diphyllin by introducing a hydroxyl group in position 7 of justicidin B. This enzyme was characterized from a microsomal fraction prepared from a Linum perenne Himmelszelt suspension culture for the first time. The hydroxylase activity was strongly inhibited by cytochrome c as well as other cytochrome P450 inhibitors like clotrimazole indicating the involvement of a cytochrome P450-dependent monooxygenase. JusB7H has a pH optimum of 7.4 and a temperature optimum of 26 degrees C. Justicidin B was the only substrate accepted by JusB7H with an apparent K(m) of 3.9+/-1.3 microM. NADPH is predominantly accepted as the electron donor, but NADH was a weak co-substrate. A synergistic effect of NADPH and NADH was not observed. The apparent K(m) for NADPH is 102+/-10 microM.     

Component volumes of unsaturated phosphatidylcholines in fluid bilayers: a densitometric study

The specific volumes of six 1,2-diacylphosphatidylcholines with monounsaturated acyl chains (diCn:1PC, n=14-24 is the even number of acyl chain carbons) in fluid bilayers in multilamellar vesicles dispersed in H(2)O were determined by the vibrating tube densitometry as a function of temperature. From the data obtained with diCn:1PC (n=14-22) vesicles in combination with the densitometric data from Tristram-Nagle et al. [Tristram-Nagle, S., Petrache, H.I., Nagle, J.F., 1998. Structure and interactions of fully hydrated dioleoylphosphatidylcholine bilayers. Biophys. J. 75, 917-925.] and Koenig and Gawrisch [Koenig, B.W., Gawrisch, K., 2005. Specific volumes of unsaturated phosphatidylcholines in the liquid crystalline lamellar phase. Biochim. Biophys. Acta 1715, 65-70.], the component volumes of phosphatidylcholines in fully hydrated fluid bilayers at 30 degrees C were obtained. The volume of the acyl chain CH and CH(2) group is V(CH)=22.30 A(3) and V(CH2) =A(3), respectively. The volume of the headgroup including the glyceryl and acyl carbonyls, V(H), and the ratio of acyl chain methyl and methylene group volumes, r=V(CH3):V(CH2) are linearly interdependent: V(H)=a-br, where a=434.41 A(3) and b=-55.36 A(3) at 30 degrees C. From the temperature dependencies of component volumes, their isobaric thermal expansivities (alpha(X)=V(X)(-1)(partial differential V(X)/ partial differential T) where X=CH(2), CH, or H were calculated: alpha(CH2)=118.4x10(-5)K(-1), alpha(CH)=71.0x10(-5)K(-1), alpha(H)=7.9x10(-5)K(-1) (for r=2) and alpha(H)=9.6x10(-5)K(-1) (for r=1.9). The specific volume of diC24:1PC changes at the main gel-fluid phase transition temperature, t(m)=26.7 degrees C, by 0.0621 ml/g, its specific volume is 0.9561 and 1.02634 ml/g at 20 and 30 degrees C, respectively, and its isobaric thermal expansivity alpha=68.7x10(-5) and 109.2x10(-5)K(-1) below and above t(m), respectively. The component volumes and thermal expansivities obtained can be used for the interpretation of X-ray and neutron scattering and diffraction experiments and for the guiding and testing molecular dynamics simulations of phosphatidylcholine bilayers in the fluid state.     

The effect of temperature acclimation on myocardial beta-adrenoceptor density and ligand binding affinity in African catfish (Claris gariepinus)

This study assessed the effects of temperature acclimation on myocardial beta-adrenoceptor density (B(max)) and binding affinity (K(d)) in African catfish (Claris gariepinus) acclimated to 15, 22 and 32 degrees C. B(max) values were not significantly different (P > 0.05) among the three acclimation groups. Conversely, the K(d) value of the 32 degrees C acclimation group (K(d) = 0.88) was significantly higher (P = 0.002) than both the 15 degrees C (K(d) = 0.48) and 22 degrees C (K(d) = 0.46) acclimation groups. In addition, K(d) of rainbow trout (Oncorhynchus mykiss) was significantly lower (P < 0.001) and B(max) significantly higher (P < 0.05) than that of African catfish at all three acclimation temperatures. These results contrast with those reported previously for temperate species, in which B(max) is inversely related to acclimation temperature, and counter a previous suggestion that B(max) is higher in tropical versus temperate species.     

Secondary quinone in photosystem II of Thermosynechococcus elongatus: semiquinone-iron EPR signals and temperature dependence of electron transfer

The secondary quinone acceptor, Q(B), has been studied in photosystem II (PSII) isolated from Thermosynechococcus (T.) elongatus. Thermoluminescence indicated that Q(B) was present in this preparation. An EPR signal observed at low temperature at g = 1.9 was attributed to Fe2+ Q(B)- on the basis of the characteristic period-of-two variations in its intensity depending on the number of laser flashes given at 20 degrees C. When samples showing the Fe2+ Q(B)- signal were illuminated at 77 K, an EPR signal at g = 1.66 appeared with an amplitude proportional to that of the Fe2+ Q(B)- signal. This signal is attributed to the Q(A)- Fe2+ Q(B)- state. While these attributions have been made previously in PSII from other origins, they have remained relatively tentative since the characteristic period-of-two oscillations of Q(B) had not previously been observed. The flash experiments indicated that more than one exchangeable plastoquinone is associated with the isolated PSII. The g = 1.66 signal from the Q(A)- Fe2+ Q(B)- state was used to study the temperature dependence of electron transfer between the two quinones. Electron transfer occurred in half of the centers (after 30 s incubation) at -28 degrees C for Q(A)- to Q(B) but at -58 degrees C for Q(A)- to Q(B)-. This marked difference for the two electron transfer reactions indicates different types of rate-limiting reactions. In the better studied but homologous system, the purple bacterial reaction center, the Q(A)- to Q(B) step is limited by a gating process, while the Q(A)- to Q(B)- step is limited by protonation events. Similar reactions in PSII could give rise to the observed temperature dependence.     

骨骼肌M蛋白抗血清的制备及正常人骨骼肌M蛋白的免疫电镜定位

分别制备了兔抗人Ｍ蛋白（Ｂ成分）抗血清和兔抗人Ｃ成分［１］抗血清。用蛋白Ａ－胶体金作标记物,对经ＬｏｗｉｃｒｙｌＫ４Ｍ低温包埋的人骨骼肌超薄切片中Ｍ蛋白和分子量１４００００的Ｃ成分进行免疫电镜定位。发现Ｍ蛋白分布于整个Ｍ线,而Ｃ成分虽然也集中于Ｍ线以内,但主要分布于Ｍ线内的边缘区域。     

Theoretical study of the decomposition mechanisms and kinetics of the ingredients RDX in composition B

RDX as a component in composition B (TNT + RDX) was first studied by us on its mechanism and kinetics of decomposition reactions in this paper. We have pointed out three possible pathways and found a new low-energy process of its decomposition. The N-N bond cleavage in composition B has higher dissociation energies than the monomer, but it is also the initial step. The optimized structures and the frequencies of all the stationary points were calculated at the B3LYP/6-31G(d) level. The minimum-energy paths were obtained by using the intrinsic reaction coordinate (IRC) theory, and the reaction potential energy curve was corrected with zero-point energy. Finally, the rate constants were calculated in a wide temperature region from 200 to 2500 K using TST, TST/Eckart theories. The obtained results also indicate that the tunneling effects are remarkable at low temperature (200 K 相似文献   

A thiol-activated lipase from <Emphasis Type="Italic">Trichosporon asahii</Emphasis> MSR 54: detergent compatibility and presoak formulation for oil removal from soiled cloth at ambient temperature

An alkaline lipase from Trichosporon asahii MSR 54 was used to develop presoak formulation for removing oil stains at ambient temperature. The lipase was produced in a reactor followed by concentration by ultrafiltration and then it was dried with starch. The biochemical characteristics of enzyme showed that it was an alkaline lipase having pH activity in the range of pH 8.0–10.0 and temperature in the range of 25–50°C. The present lipase was active >80% at 25°C. The lipase was cystein activated with fourfold enhancement in presence of 5 mM cystein and likewise the activity was also stimulated in presence of papain hydrolysate which served as source of cystein. The presoak formulation consisted of two components A and B, component A was enzyme additive and B was a mixture of carbonate/bicarbonate source of alkali and papain hydrolysate as source of cystein. The results indicated that the presoaking in enzyme formulation followed by detergent washing was a better strategy for stain removal than direct washing with detergent in presence of lipase. Further, it was observed that 0.25% presoak component B in presence of 100 U enzyme component A (0.1 g) was the best formulation in removing maximum stain from mustard oil/triolein soiled clothes as indicated by increase in reflectance which was found equal to that of control cloth. The lipase action in presoaked formulation was clearly indicated by quantitated fatty acid release and also the TLC results of wash water, where oil hydrolytic products were visible only in presence of enzyme in the treatment. The wash performance carried at 25°C indicated that washing at 25°C was at par with that at 40°C as indicated by similar reflectance of the washed cloth piece though qualitative fatty acid release was higher at 40°C.     

Requirement of heat and metabolic energy for the expression of inhibitory action of colicin K.

Escherichia coli B, induced for beta-galactoside permease, can accumulate thio-methyl-beta-galactoside in the cell even at 0 degrees D. At this temperature, cells adsorb colicin K but the adsorbed colicin does not inhibit thiomethyl-beta-galactoside uptake. Inhibition by colicin K is, however, seen at 0 degrees C after exposure of the colicin K-cell complex to a high temperature: a greater degree of inhibition occurs with increasing temperature or duration or exposure. There is a transition point at around 21 degrees C in Arrhenius plots of this colicin K activation reaction. If inhibitors of energy yielding reactions are present during the heat treatment, the inhibitory action of colicin K (as measured by thiomethyl-beta-galactoside uptake after returning the colicin K-cell complex to 0 degrees C and removal of the inhibitors) is prevented. These results indicate that adsorbed colicin K is converted into the active state only in the presence of metabolic energy and that cell surface fluidity appears to be concerned in this process.     

Effect of avermectns on Ca(2+)-dependent chloride currents in plasmalemma of Chara corallina cells]

A natural complex of avermectins, aversectin C, and a component of this complex, avermectin A1, were shown to change the conductivity of Ca(2+)-dependent chloride channels of plasmalemma of Chara corallina cells by acting only from the outer side of the cellular membrane. Low concentrations of aversectin C and avermectin A1 increased the chloride current: K1/2 = 3.5 x 10(-5) mg/ml for the whole complex and K1/2 = 2.1 x 10(-3) mg/ml for A1. Relatively high concentrations of the compounds suppressed the chloride current: K1/2 = 2.2 x 10(-3) mg/ml for aversectin C and K1/2 = 4.2 x 10(-6) mg/ml for A1. The Hill coefficients for the interaction of avermectin A1 with the corresponding targets for stimulation and suppression of the chloride current were 2.8 and 2.5 respectively. Bicuculine, a non-specific inhibitor of the GABA alpha-receptors, did not influence stimulation of chloride currents caused by action of low concentrations of avermectins, but at the same time blocked suppression of the chloride currents associated with the action of high doses of avermectins. Avermectins A2, B1 (abamectin), B2 and 22,23-dihydroavermectin B1 (vermectin) in the concentration range studied, did not affect the chloride currents of Chara corallina cells.     

Requirement of heat and metabolic energy for the expression of inhibitory action of colicin K

Escherichia coli B, induced for β-galactoside permease, can accumulate thiomethyl-β-galactoside in the cell even at 0 °C. At this temperature, cells adsorb colicin K but the adsorbed colicin does not inhibit thiomethyl-β-galactoside uptake. Inhibition by colicin K is, however, seen at 0 °C after exposure of the colicin K-cell complex to a high temperature: a greater degree of inhibition occurs with increasing temperature or duration of exposure. There is a transition point at around 21 °C in Arrhenius plots of this colicin K activation reaction.If inhibitors of energy yielding reactions are present during the heat treatment, the inhibitory action of colicin K (as measured by thiomethyl-β-galactoside uptake after returning the colicin K-cell complex to 0 °C and removal of the inhibitors) is prevented.These results indicate that adsorbed colicin K is converted into the active state only in the presence of metabolic energy and that cell surface fluidity appears to be concerned in this process.     

Temperature—composition phase diagram and gel properties of the gelatin—starch—water system

The gelatin-starch-water system has been studied at different temperatures, at a total biopolymer concentration of 5.0 wt%. The weight ratios (W) of gelatin/ starch used were 9:1, 8:2.4. 2:8, 1:9, with pH values between 5.82 (at W = 9:1) and 6.50 (at W = 1:9). The systems were characterized rheologically and by turbidity measurements to construct a phase diagram in the temperature (T) and composition (W) variables. The T-W quadrant consists of three regions: a singlephase solutions region (A) and regions of complete and incomplete phase separation (B and C, respectively). The system in region C is a gel. Region B, lying between A and C, corresponds to two co-existing liquid phases. The transition from A to C (obtained by cooling the system at constant W) involves crossing region B. The properties of the resulting gels depend on the rate of this intersection. Gels formed on rapid cooling have an even distribution of turbidity, whereas slow cooling gives two gel layers of different turbidity. The gelation temperature and gel strength of the mixed systems are dominated by the gelatin component, with no indication of network formation by starch.     

Calcium-induced conformational change in fragment 1-86 of factor X

Time-resolved fluorescence of the single tryptophan residue Trp41 in fragment 1-86 of factor X (FX F1-86) is studied using a time-correlated single photon counting technique with synchrotron radiation as the excitation source. Calcium ions are believed to induce a conformational change in the N-termini of the activated factor X and other vitamin K dependent proteins, which is accompanied by a decrease in fluorescence intensity. The titration with calcium yields a sigmoidal fluorescence titration curve with a transition midpoint concentration of 0.44 mM. The wavelength-dependent tryptophan fluorescence decays of the apo-FX F1-86 (in the absence of calcium) and Ca-FX F1-86 are characterized by conventional multiexponential analysis and fluorescence lifetime distribution analysis. In the absence of calcium there are three significant classes of fluorescence lifetimes (ns) that are nearly wavelength independent: 0.55 +/- 0.08 (component A), 2.6 +/- 0.1 (component B), and 5.3 +/- 0.3 (component C). However, their preexponential amplitudes vary with wavelength. The decay associated emission spectra of the individual components show that components B and C contribute over 85% to the total fluorescence for all examined wavelengths. However, in the presence of calcium, the analysis of the time-resolved fluorescence data of Ca-FX F1-86 yields four wavelength-independent lifetimes (ns) of 0.30 +/- 0.09 (component D), 0.65 +/- 0.10 (component A), 2.7 +/- 0.2 (component B), and 5.4 +/- 0.3 (component C). Calcium addition to the apo-FX F1-86 leads to a decrease in the fluorescence intensities of components B and C while their decay times remain unaffected. In Ca-FX F1-86 an additional component D arises that has a decay time of 0.30 ns and that contributes up to 35% to the total fluorescence intensity. A comparison with a previous investigation of prothrombin fragment 1 demonstrates the extensive structural and functional homology between the N termini of prothrombin and factor X(a).     

Temperature dependence of the structure and dynamics of myoglobin. A simulation approach

The results of simulations of the structure and internal motions of carbonomonoxymyoglobin (MbCO) at two different temperatures (325 and 80 K) are presented and compared with experimental data. Properties calculated from the 120 ps trajectory at 325 K are used as a reference in the analysis of the motion of the protein at 80 K. Three separate 80 K molecular dynamics trajectories were calculated; they were started with different coordinate sets from the 325 K simulation and the lower temperature was achieved by scaling the velocities. The simulations yield results for the structural changes between 325 and 80 K that are in general accord with those from X-ray data. Both the experimental and calculated radii of gyration, distances from the center of mass and main-chain difference distance matrices show that there is a significant but inhomogeneous shrinkage with decreasing temperature. For the atomic fluctuations, by contrast, the calculated temperature dependence is very different from the X-ray results; i.e. the calculated root-mean-square backbone fluctuations decrease to 0.11 A at 80 K from 0.51 A at 325 K, while the fluctuations obtained from the X-ray B factors go from 0.56 A at 260 K to 0.47 A at 80 K. The smaller temperature dependence of the B factors suggests that there is significant conformational disorder in MbCO crystals at lower temperatures. This is in accord with the simulation results, which show that the protein is trapped in restricted regions of conformational space at 80 K, while at 325 K a much larger region is accessible to the protein. Analysis of the fluctuations at 325 K and 80 K shows that the room temperature flexibility of the protein is determined by the mobility of the loop regions and by side-chain torsional motions (in accord with earlier simulation results), while the low temperature fluctuations involve motion within a single well. Examination of the calculated iron atom fluctuations and comparison with Mossbauer data show good agreement. It is found that the dominant contribution to the iron motion arises from heme sliding; motion of the iron relative to the heme are much smaller.     

Specific Sindbis virus-coded function for minus-strand RNA synthesis.

The synthesis of minus-strand RNA was studied in cell cultures infected with the heat-resistant strain of Sindbis virus and with temperature-sensitive (ts) belonging to complementation groups A, B, F, and G, all of which exhibited an RNA-negative (RNA-) phenotype when infection was initiated and maintained at 39 degrees C, the nonpermissive temperature. When infected cultures were shifted from 28 degrees C (the permissive temperature) to 39 degrees C at 3 h postinfection, the synthesis of viral minus-strand RNA ceased in cultures infected with ts mutants of complementation groups B and F, but continued in cultures infected with the parental virus and mutans of complementation groups A and G. In cultures infected with ts11 of complementation group B, the synthesis of viral minus-strand RNA ceased, whereas the synthesis of 42S and 26S plus-strand RNAs continued for at least 5 h after the shift to 39 degrees C. However, when ts11-infected cultures were returned to 28 degrees C 1 h after the shift to 39 degrees C, the synthesis of viral minus-strand RNA resumed, and the rate of viral RNA synthesis increased. The recovery of minus-strand synthesis translation of new proteins. We conclude that at least one viral function is required for alphavirus minus-strand synthesis that is not required for plus-strand synthesis. In cultures infected with ts6 of complementation group F, the syntheses of both viral plus-strand and minus-strand RNAs were drastically reduced after the shift to 39 degrees C. Since ts6 failed to synthesize both plus-strand and minus-strand RNAs after the shift to 39 degrees C, at least one common viral component appears to be required for the synthesis of both minus-strand and plus-strand RNAs.     

Dynamic light scattering investigations of human erythrocyte spectrin.

Dynamic light scattering measurements were performed on spectrin from human erythrocytes in 25 mM Tris buffer at pH 7.6 with 100 mM NaCl and 5 mM EDTA. Measurements were made on spectrin solutions prepared as dimers and tetramers over the temperature range from 23 to 41 degrees C, as a function of the square of the scattering vector (K2) over the range of 0.7 x 10(10) cm-2 less than or equal to K1 less than or equal to 20 x 10(10) cm-2. Analysis of the autocorrelation functions collected for these solutions revealed the presence of two predominant motional components over the entire range of K2. Plots of the diffusion coefficients (D20) of these components, with viscosity and temperature corrected to water at 20 degrees C, as a function of K2 indicated three rather distinct regions, flat regions at low and high K2 joined by a sloping intermediate region. At small K2 (less than or equal to 4 x 10(10) cm-2) the D20 values were (7.3 +/- 2.0) x 10(-8) cm2/s for the slow component and (20.3 +/- 2.0) x 10(-8) cm2/s for the fast component. At large K2 (greater than or equal to 10 x 10(10) cm-2) the values increased to (13.0 +/- 2.0) x 10(-8) cm2/s for the slow component and (39.4 +/- 2.0) x 10(-8) cm2/s for the fast component. In the intermediate K2 region, D20 is a linear function of K2 and appears as a transition between the low and high K2 regions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Molecular basis of the heat denaturation of photosystem II

The thermal denaturation of the photosystem II (PSII) membrane protein complex is investigated by assigning the endothermic transitions observed by differential scanning calorimetry (DSC) to the denaturation of particular proteins of the PSII complex. In a prior DSC study of PSII membranes [Thompson, L. K., Sturtevant, J. M., & Brudvig, G. W. (1986) Biochemistry 25, 6161], five DSC peaks were observed in the 30-70 degrees C temperature range (A1, A2, B, C, and D). The A2 peak was assigned to denaturation of a component essential for water oxidation and the B peak to denaturation of a component critical to the remainder of the electron-transport chain. We have now extended these studies with thermal gel analysis and electron paramagnetic resonance (EPR) measurements. Thermal gel analysis, a technique which relies on a change in the solubility properties of a membrane protein upon denaturation, has been used to determine the temperatures of denaturation of all of the major membrane proteins of the PSII complex. EPR experiments have been used to monitor chlorophyll photooxidation and the stability of TyrD+. Peaks B, C, and D in the DSC denaturation profile are each assigned to the denaturation of several proteins, which provides information on the organization of the PSII complex into structural and functional units. Peak B corresponds to the denaturation of peripheral core proteins and closely associated antenna proteins, peak C to the PSII core, and peak D to the loosely associated antenna proteins. No membrane protein is observed to denature during the A2 peak. The A2 peak is altered by the presence of catalase, superoxide dismutase, low chloride, and high pH. These results suggest that the abnormally sharp A2 peak occurs when the highly oxidizing, sequestered Mn complex (the active site in water oxidation) becomes accessible to the aqueous phase, at elevated temperatures. We propose a mechanism for the reaction of the Mn complex with hydroxide ions, which involves peroxide or superoxide and results in the reduction and release of Mn. The proposed model provides insight into the well-known instability of the Mn complex and the role of chloride in stabilizing the complex. This may enable the future development of purification procedures and may explain the sensitivity of the water-oxidizing apparatus of PSII to heat denaturation.