生物脱有机硫催化剂的最新研究进展

生物脱有机硫作为常规的加氢脱硫替代方法近几年受到越来越多的重视,也取得了一些重要的结果,这都推动了生物脱硫向产业化应用。本文简要综述了最近几年通过菌株改造提高催化剂活力和消除无机硫抑制以及脱硫酶系纯化方面所取得一些进展。     

Medium composition overturns the widely accepted sulfate-dependent repression of desulfurization phenotype in Rhodococcus qingshengii IGTS8

Microbial desulfurization has been extensively studied as a promising alternative to the widely applied chemical desulfurization process. Sulfur removal from petroleum and its products becomes essential, as the environmental regulations become increasingly stringent. Rhodococcus qingshengii IGTS8 has gained ground as a naturally occurring model biocatalyst, due to its superior specific activity for desulfurization of dibenzothiophene (DBT). Recalcitrant organic sulfur compounds—DBT included—are preferentially removed by selective carbon-sulfur bond cleavage to avoid a reduction in the calorific value of the fuel. The process, however, still has not reached economically sustainable levels, as certain limitations have been identified. One of those bottlenecks is the repression of catalytic activity caused by ubiquitous sulfur sources such as inorganic sulfate, methionine, or cysteine. Herein, we report an optimized culture medium for wild-type stain IGTS8 that completely alleviates the sulfate-mediated repression of biodesulfurization activity without modification of the natural biocatalyst. Medium C not only promotes growth in the presence of several sulfur sources, including DBT, but also enhances biodesulfurization of resting cells grown in the presence of up to 5 mM sulfate. Based on the above, the present work can be considered as a step towards the development of a more viable commercial biodesulfurization process.     

Microbial Conversion of Petro-sulfur Compounds

For the purpose of proving possibility of desulfurization from petroleum oil by microbial procedures, first approach was made to obtaining microorganisms capable of converting petro-sulfur compounds. Dibenzothiophene was used in this study as a model of the sulfur compounds in heavy oil.

Six strains of microorganisms were isolated with dibenzothiophene from various soils. These strains produced organic acid compounds containing sulfur from dibenzothiophene. As a result of the taxonomic studies, three of the strains were found to be new species belonging to the Genus Pseudomonas, so the authors proposed to assign the names, Pseudomonas abikonensis nov. sp. to one strain, and Pseudomonas jianii nov. sp. to the other two strains.     

Desulfurization of Dibenzothiophene and Diesel Oils by a Newly Isolated Gordona Strain, CYKS1

A dibenzothiophene (DBT)-desulfurizing bacterial strain was isolated and identified as Gordona strain CYKS1. Strain CYKS1 was found to transform DBT to 2-hydroxybiphenyl via the 4S pathway and to be able to also use organic sulfur compounds other than DBT as a sole sulfur source. Its desulfurization activity was susceptible to sulfate repression. Active resting cells for desulfurization could be prepared only in the early growth phase. When two types of diesel oils, middle distillate unit feed (MDUF) and light gas oil (LGO) containing various organic sulfur compounds including DBT, were treated with resting cells of strain CYKS1 for 12 h, the total sulfur content significantly decreased, from 0.15% (wt/wt) to 0.06% (wt/wt) for MDUF and from 0.3% (wt/wt) to 0.25% (wt/wt) for LGO. The newly isolated strain CYKS1 is considered to have good potential for application in the biodesulfurization of fossil fuels.     

红球菌Rhodococcus sp.DS-3 dszABC基因和dszD基因在大肠杆菌中的共表达

二苯并噻吩(DBT)及其衍生物微生物脱硫的4S途径需要4个酶(DszA,DszB,DszC and DszD)参与催化。其中DBT单加氧酶(DszC or DBT-MO)和DBT-砜单加氧酶(DszA or DBTO2-MO)都是黄素依赖型氧化酶,它们的催化反应需要菌体中还原型的黄素单核苷酸(FMNH2),FMNH2由辅酶黄素还原酶(DszD)再生。因此,共表达DszA,DszB,DszC和DszD可以提高整个脱硫途径的速率。构建了两个不相容性表达载体pBADD和paN2并在大肠杆菌中实现了4个脱硫酶基因的共表达。DszA,DszB,DszC和DszD的可溶性蛋白表达量分别占菌体总蛋白质的7.6%,3.5%,3.1%和18%。共表达时的脱硫活性是单独用paN2表达时的5.4倍,并对工程菌休止细胞脱除模拟柴油中DBT的活性进行了研究。     

红球菌SDUZAWQ对有机硫和无机硫的耐受性研究及脱硫基因的克隆

以筛选得到的红球菌SDUZAWQ为对象,研究其在不同浓度的有机硫化合物二苯并噻吩(DBT)存在下的脱硫能力,以及在0.2mmolLDBT和不同浓度Na2SO4同时存在下的脱硫情况。当DBT浓度高达6mmolL时,菌株仍能生长,而且检测出产物2-羟基联苯(2-HBP)的存在,说明该菌株具有耐受较高浓度DBT的能力。当DBT和Na2SO4同时存在时,DBT为菌株SDUZAWQ所利用,并且也检测出2-HBP,并非如文献所报道的红球菌在无机硫存在下不代谢DBT,表明该菌株能够耐受一定浓度的无机硫酸盐。对相关脱硫基因的克隆和测序结果显示,完整脱硫基因dszABC、其上游调控序列和dszD的序列与模式菌株RhodococcuserythropolisIGTS8的同源性分别是99%、100%和100%。     

化石燃料生物脱有机氮研究展望

化石燃料中与有机硫相似的另一类孤对电子含氮有机化合物的存在对生产和环境造成许多危害。石油中的含氮有机化合物是影响炼油工艺、产品性能质量的主要因素。含氮有机化合物具有致癌、致突变性 ,燃烧后则以NOx的形式释放污染大气。化石燃料中所含的有机氮较有机硫更难以去除 ,常规的化学脱有机氮技术高压加氢法处理燃油能耗高 ,处理效果不理想等方面的缺陷使人们思考生物脱氮的可能性。考察了国内外近十多年来化石燃料生物脱有机氮工作的研究进展 ,包括模式有机氮化合物微生物的代谢途径 ,以及相应的代谢途径中的关键酶及其编码基因等方面的研究。     

Biodesulfurization: a model system for microbial physiology research

Biological desulfurization (biodesulfurization) of dibenzothiophene (DBT) by the 4S pathway is a model system for an enviromentally benign way to lower the sulfur content of petroleum. Despite a large amount of effort the efficiency of the 4S pathway is still too low for a commercial oil biodesulfurization process, but the 4S pathway could potentially be used now for commercial processes to produce surfactants, antibiotics, polythioesters and other chemicals and for the detoxification of some chemical warfare agents. Proteins containing disulfide bonds are resistant to temperature, pH, and solvents, but the production of disulfide-rich proteins in microbial hosts is challenging. The study of the 4S pathway can provide insights as to how to maximize the production of disulfide-rich proteins. Engineering of the operon encoding the 4S pathway to contain a greater content of methionine and cysteine may be able to link use of DBT as a sole sulfur source to increasing 4S pathway activity by increasing the nutritional demand for sulfur. This strategy could result in the development of biocatalysts suitable for use in an oil biodesulfurization process, but the study of the 4S pathway can also lead to a better understanding of microbial physiology to optimize activity of a mult-step co-factor-requiring pathway, as well as the production of highly stable industrially relevant enzymes for numerous applications.     

Flavin reductase coupling with two monooxygenases involved in dibenzothiophene desulfurization: purification and characterization from a non-desulfurizing bacterium,Paenibacillus polymyxa A-1

The dibenzothiophene (DBT) desulfurizing bacterium metabolizes DBT to form 2-hydroxybiphenyl without breaking the carbon skeleton. Of the DBT desulfurization enzymes, DszC and DszA catalyze monooxygenation reactions, both requiring flavin reductase. We searched for non-DBT-desulfurizing microorganisms producing a flavin reductase that couples more efficiently with DszC than that produced by the DBT desulfurizing bacterium Rhodococcus erythropolis D-1, and found Paenibacillus polymyxa A-1 to be a promising strain. The enzyme was purified to complete homogeneity. K(m) values for FMN and NADH were 2.1 microM and 0.57 mM, respectively. Flavin compounds were good substrates, some nitroaromatic compounds were also active, and regarding the electron donor, the activity for NADPH was about 1.5 times that for NADH. In the coupling assay with DszC, only FMN or riboflavin acted as the electron acceptor. The coupling reactions of P. polymyxa A-1 flavin reductase with DszC and DszA proceeded more efficiently (3.5- and 5-fold, respectively) than those of R. erythropolis D-1 flavin reductase when identical enzyme activities of each flavin reductase were added to the reaction mixture. The result of the coupling reaction suggested that, in the microbial DBT desulfurization, flavin reductase from the non-DBT-desulfurizing bacterium was superior to that from the DBT-desulfurizing bacterium.     

Deep desulfurization of extensively hydrodesulfurized middle distillate oil by Rhodococcus sp. strain ECRD-1

Dibenzothiophene (DBT), and in particular substituted DBTs, are resistant to hydrodesulfurization (HDS) and can persist in fuels even after aggressive HDS treatment. Treatment by Rhodococcus sp. strain ECRD-1 of a middle distillate oil whose sulfur content was virtually all substituted DBTs produced extensive desulfurization and a sulfur level of 56 ppm.     

Deep Desulfurization of Extensively Hydrodesulfurized Middle Distillate Oil by Rhodococcus sp. Strain ECRD-1

Dibenzothiophene (DBT), and in particular substituted DBTs, are resistant to hydrodesulfurization (HDS) and can persist in fuels even after aggressive HDS treatment. Treatment by Rhodococcus sp. strain ECRD-1 of a middle distillate oil whose sulfur content was virtually all substituted DBTs produced extensive desulfurization and a sulfur level of 56 ppm.     

Desulfurization and desulfonation: applications of sulfur-controlled gene expression in bacteria

Inorganic sulfate is the preferred sulfur source for the growth of most microorganisms but, in its absence, many organosulfur compounds can be degraded microbially to provide sulfur. Desulfurization of dibenzothiophene (DBT) by Rhodococcus sp. and of aromatic sulfonates by Pseudomonas sp. has considerable biotechnological potential. Both these pathways require non-flavin-containing FMNH2-dependent monoxygenases (DszC/DszA and SsuD, respectively). FMNH2 is provided from the freely diffusible FMNH2 pool in the cell, and is replenished by specific NAD(P)H:FMN oxidoreductases (DszD and SsuE). Overexpression of the DszD FMN reductase in a heterologous system increases the efficiency of DBT desulfurization but is detrimental to cell growth at high levels. Expression of the sulfonatase that cleaves aromatic sulfonates (surfactants, dyes) is accompanied by synthesis of a thiol-specific antioxidant protein, which may protect the cell from superoxide radicals generated by autoxidation of the reduced flavin. Effective application of DBT desulfurization in the biodesulfurization of crude oil, and of arylsulfonate desulfonation in bioremediation, may require optimization of both flavin reductase levels and antioxidant protection systems within the cell.     

Recent advances in petroleum microbiology.

Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and extents of desulfurization. Bacterial processes are being commercialized for removal of H(2)S and sulfoxides from petrochemical waste streams. Microbes also have potential for use in removal of nitrogen from crude oil leading to reduced nitric oxide emissions provided that technical problems similar to those experienced in biodesulfurization can be solved. Enzymes are being exploited to produce added-value products from petroleum substrates, and bacterial biosensors are being used to analyze petroleum-contaminated environments.     

Operon structure and functional analysis of the genes encoding thermophilic desulfurizing enzymes of Paenibacillus sp. A11-2

Paenibacillus A11-2 can efficiently cleave two carbon&bond;sulfur bonds in dibenzothiophene (DBT) and alkyl DBTs, which are refractory by conventional petroleum hydrodesulfurization, to remove sulfur atom at high temperatures. An 8.7-kb DNA fragment containing the genes for the DBT desulfurizing enzymes of A11-2 was cloned in Escherichia coli and characterized. Heterologous expression analysis of the deletion mutants identified three open reading frames that were required for the desulfurization of DBT to 2-hydroxybiphenyl (2-HBP). The three genes were designated tdsA, tdsB, and tdsC (for thermophilic desulfurization). Both the nucleotide sequences and the deduced amino acid sequences show significant homology to dszABC genes of Rhodococcus sp. IGTS8, but there are several local differences between them. Subclone analysis revealed that the product of tdsC oxidizes DBT to DBT-5,5'-dioxide via DBT-5-oxide, the product of tdsA converts DBT-5,5'-dioxide to 2-(2-hydroxyphenyl) benzene sulfinate, and the product of tdsB converts 2-(2-hydroxyphenyl)benzene sulfinate to 2-HBP. Cell-free extracts of a recombinant E. coli harboring all the three desulfurization genes converted DBT to 2-HBP at both 37 and 50 degrees C. In vivo and in vitro exhibition of desulfurization activity of the recombinant genes derived from a Paenibacillus indicates that an E. coli oxidoreductase can be functionally coupled with the monooxygenases of a gram-positive thermophile.     

Ring cleavage of sulfur heterocycles: how does it happen?

Sulfur heterocycles are common constituents of petroleum and liquids derived from coal, and they are found in some secondary metabolites of microorganisms and plants. They exist primarily as saturated rings and thiophenes. There are two major objectives driving investigations of the microbial metabolism of organosulfur compounds. One is the quest to develop a process for biodesulfurization of fossil fuels, and the other is to understand the fates of organosulfur compounds in petroleum- or creosote-contaminated environments which is important in assessing bioremediation processes. For these processes to be successful, cleavage of different types of sulfur heterocyclic rings is paramount. This paper reviews the evidence for microbial ring cleavage of a variety of organosulfur compounds and discusses the few well-studied cases which have shown that the C-S bond is most susceptible to breakage leading to disruption of the ring. In most cases, the introduction of one or more oxygen atom(s) onto the adjacent C atom and/or onto the S atom weakens the C-S bond, facilitating its cleavage. Although much is known about the thiophene ring cleavage in dibenzothiophene, there is still a great deal to be learned about the cleavage of other sulfur heterocycles.     

Desulfurization of various organic sulfur compounds and the mixture of DBT + 4,6-DMDBT by Mycobacterium sp. ZD-19

A new isolated dibenzothiophene (DBT) desulfurizing bacterium, identified as Mycobacterium sp. ZD-19 can utilize a wide range of organic sulfur compounds as a sole sulfur source. Thiophene (TH) or benzothiophene (BTH) was completely degraded by strain ZD-19 within 10h or 42 h, and 100% DBT or 4,6-dimethyldibenzothiophene (4,6-DMDBT) was removed within 50h or 56 h, respectively. Diphenylsulfide (DPS) possessed the lowest desulfurization efficiencies with 60% being transformed within 50h and 80% at 90 h. The desulfurization activities of five substrates by resting cells are in order of TH>BTH>DPS>DBT>4,6-DMDBT. In addition, when DBT and 4,6-DMDBT were mixed, they could be simultaneously desulfurized by strain ZD-19. However, DBT appeared to be attacked prior to 4,6-DMDBT. The desulfurization rate of DBT or 4,6-DMDBT in mixture is lower than they are desulfurized separately, indicating that the substrate competitive inhibition is existent when DBT and 4,6-DMDBT are mixed.     

脱硫菌Fds-1的分离鉴定及其对柴油脱硫特性的研究

从含硫土壤中分离筛选出一株专一性脱硫菌Fds-1,经生理生化指标和16S rRNA序列分析鉴定其属于枯草芽孢杆菌(Bacillus subtilis)。用Gibb’s试剂显色和气相色谱-质谱联用分析表明,该菌株通过“4S”途径脱除有机硫。实验发现Fds-1的最佳脱硫活性在30℃,在此温度下72h内能脱除约0.5mmol/L DBT中的有机硫。Fds-1菌株对有机硫化合物的利用情况和柴油脱硫前后烃组分比较都进一步证明该菌株适合于柴油生物脱硫。利用休止细胞对不同组分柴油的脱硫研究表明,脱硫菌株Fds-1对精制柴油中的DBT类化合物的降解能力强。因此,该菌株对精制低硫柴油的深度脱硫具有应用意义。     

Recent Advances in Petroleum Microbiology

Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and extents of desulfurization. Bacterial processes are being commercialized for removal of H₂S and sulfoxides from petrochemical waste streams. Microbes also have potential for use in removal of nitrogen from crude oil leading to reduced nitric oxide emissions provided that technical problems similar to those experienced in biodesulfurization can be solved. Enzymes are being exploited to produce added-value products from petroleum substrates, and bacterial biosensors are being used to analyze petroleum-contaminated environments.     

Thermophilic Biodesulfurization of Various Heterocyclic Sulfur Compounds and Crude Straight-Run Light Gas Oil Fraction by a Newly Isolated Strain Mycobacterium phlei WU-0103

Various heterocyclic sulfur compounds such as naphtho[2,1-b]thiophene (NTH) and benzo[b]thiophene (BTH) derivatives can be detected in diesel oil, in addition to dibenzothiophene (DBT) derivatives. Mycobacterium phlei WU-0103 was newly isolated as a bacterial strain capable of growing in a medium with NTH as the sulfur source at 50°C. M. phlei WU-0103 could degrade various heterocyclic sulfur compounds, not only NTH and its derivatives but also DBT, BTH, and their derivatives at 45°C. When M. phlei WU-0103 was cultivated with the heterocyclic sulfur compounds such as NTH, NTH 3,3-dioxide, DBT, BTH, and 4,6-dialkylDBTs as sulfur sources, monohydroxy compounds and sulfone compounds corresponding to starting heterocyclic sulfur compounds were detected by gas chromatography–mass spectrometry analysis, suggesting the sulfur-specific desulfurization pathways for heterocyclic sulfur compounds. Moreover, total sulfur content in 12-fold-diluted crude straight-run light gas oil fraction was reduced from 1000 to 475 ppm S, with 52% reduction, by the biodesulfurization treatment at 45°C with growing cells of M. phlei WU-0103. Gas chromatography analysis with a flame photometric detector revealed that most of the resolvable peaks, such as those corresponding to alkylated derivatives of NTH, DBT, and BTH, disappeared after the biodesulfurization treatment. These results indicated that M. phlei WU-0103 may have a good potential as a biocatalyst for practical biodesulfurization of diesel oil.     

Microbial desulfurization of motor fuel

Deep desulfurization of oil and its fractions is currently performed by hydration at high temperature and hydrogen pressure, which makes the process rather expensive. Searches for alternative modes for desulfurization, among which is biodesulfurization, are intensely in progress. In this review, the following subjects are discussed: microorganisms capable of desulfurizing petroleum products, mechanisms of their activity, achievements in the field of process development, and disadvantages of the method. The existing level of knowledge is insufficient for immediate implementation of an industrial biotechnological process for sulfur elimination from oil and motor fuel and it can only be regarded as a medium-term (10–15 years) prospect.