Assembly of the herpes simplex virus capsid: requirement for the carboxyl-terminal twenty-five amino acids of the proteins encoded by the UL26 and UL26.5 genes.

Herpes simplex virus type 1 (HSV-1) intermediate capsids are composed of seven proteins, VP5, VP19C, VP21, VP22a, VP23, VP24, and VP26, and the genes that encode these proteins, UL19, UL38, UL26, UL26.5, UL18, UL26, and UL35, respectively. The UL26 gene encodes a protease that cleaves itself and the product of the UL26.5 gene at a site (M site) 25 amino acids from the C terminus of these two proteins. In addition, the protease cleaves itself at a second site (R site) between amino acids 247 and 248. Cleavage of the UL26 protein gives rise to the capsid proteins VP21 and VP24, and cleavage of the UL26.5 protein gives rise to the capsid protein VP22a. Previously we described the production of HSV-1 capsids in insect cells by infecting the cells with recombinant baculoviruses expressing the six capsid genes (D. R. Thomsen, L. L. Roof, and F. L. Homa, J. Virol. 68:2442-2457, 1994). Using this system, we demonstrated that the products of the UL26 and/or UL26.5 genes are required as scaffolds for assembly of HSV-1 capsids. To better understand the functions of the UL26 and UL26.5 proteins in capsid assembly, we constructed baculoviruses that expressed altered UL26 and UL26.5 proteins. The ability of the altered UL26 and UL26.5 proteins to support HSV-1 capsid assembly was then tested in insect cells. Among the specific mutations tested were (i) deletion of the C-terminal 25 amino acids from the proteins coded for by the UL26 and UL26.5 genes; (ii) mutation of His-61 of the UL26 protein, an amino acid required for protease activity; and (iii) mutation of the R cleavage site of the UL26 protein. Analysis of the capsids formed with wild-type and mutant proteins supports the following conclusions: (i) the C-terminal 25 amino acids of the UL26 and UL26.5 proteins are required for capsid assembly; (ii) the protease activity associated with the UL26 protein is not required for assembly of morphologically normal capsids; and (iii) the uncleaved forms of the UL26 and UL26.5 proteins are employed in assembly of 125-nm-diameter capsids; cleavage of these proteins occurs during or subsequent to capsid assembly. Finally, we carried out in vitro experiments in which the major capsid protein VP5 was mixed with wild-type or truncated UL26.5 protein and then precipitated with a VP5-specific monoclonal antibody.(ABSTRACT TRUNCATED AT 400 WORDS)     

Assembly of herpes simplex virus capsids using the human cytomegalovirus scaffold protein: critical role of the C terminus.

An essential step in assembly of herpes simplex virus (HSV) type 1 capsids involves interaction of the major capsid protein (VP5) with the C terminus of the scaffolding protein (encoded by the UL26.5 gene). The final 12 residues of the HSV scaffolding protein contains an A-X-X-F-V/A-X-Q-M-M-X-X-R motif which is conserved between scaffolding proteins found in other alphaherpesviruses but not in members of the beta- or gamma-herpesviruses. Previous studies have shown that the bovine herpesvirus 1 (alphaherpesvirus) UL26.5 homolog will functionally substitute for the HSV UL26.5 gene (E. J. Haanes et al., J. Virol. 69:7375-7379, 1995). The homolog of the UL26.5 gene in the human cytomegalovirus (HCMV) genome is the UL80.5 gene. In these studies, we tested whether the HCMV UL80.5 gene would substitute for the HSV UL26.5 gene in a baculovirus capsid assembly system that we have previously described (D. R. Thomsen et al., J. Virol. 68:2442-2457, 1994). The results demonstrate that (i) no intact capsids were assembled when the full-length or a truncated (missing the C-terminal 65 amino acids) UL80.5 protein was tested; (ii) when the C-terminal 65 amino acids of the UL80.5 protein were replaced with the C-terminal 25 amino acids of the UL26.5 protein, intact capsids were made and direct interaction of the UL80.5 protein with VP5 was detected; (iii) assembly of intact capsids was demonstrated when the sequence of the last 12 amino acids of the UL80.5 protein was changed from RRIFVA ALNKLE to RRIFVAAMMKLE; (iv) self-interaction of the scaffold proteins is mediated by sequences N terminal to the maturation cleavage site; and (v) the UL26.5 and UL80.5 proteins will not coassemble into scaffold structures. The results suggest that the UL26.5 and UL80.5 proteins form a scaffold by self-interaction via sequences in the N termini of the proteins and emphasize the importance of the C terminus for interaction of scaffold with the proteins that form the capsid shell.     

Assembly of herpes simplex virus (HSV) intermediate capsids in insect cells infected with recombinant baculoviruses expressing HSV capsid proteins.

The capsid of herpes simplex virus type 1 (HSV-1) is composed of seven proteins, VP5, VP19C, VP21, VP22a, VP23, VP24, and VP26, which are the products of six HSV-1 genes. Recombinant baculoviruses were used to express the six capsid genes (UL18, UL19, UL26, UL26.5, UL35, and UL38) in insect cells. All constructs expressed the appropriate-size HSV proteins, and insect cells infected with a mixture of the six recombinant baculoviruses contained large numbers of HSV-like capsids. Capsids were purified by sucrose gradient centrifugation, and electron microscopy showed that the capsids made in Sf9 cells had the same size and appearance as authentic HSV B capsids. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis demonstrated that the protein composition of these capsids was nearly identical to that of B capsids isolated from HSV-infected Vero cells. Electron microscopy of thin sections clearly demonstrated that the capsids made in insect cells contained the inner electron-translucent core associated with HSV B capsids. In infections in which single capsid genes were left out, it was found that the UL18 (VP23), UL19 (VP5), UL38 (VP19C), and either the UL26 (VP21 and VP24) or the UL26.5 (VP22a) genes were required for assembly of 100-nm capsids. VP22a was shown to form the inner core of the B capsid, since in infections in which the UL26.5 gene was omitted the 100-nm capsids that formed lacked the inner core. The UL35 (VP26) gene was not required for assembly of 100-nm capsids, although assembly of B capsids was more efficient when it was present. These and other observations indicate that (i) the products of the UL18, UL19, UL35, and UL38 genes self-assemble into structures that form the outer surface (icosahedral shell) of the capsid, (ii) the products of the UL26 and/or UL26.5 genes are required (as scaffolds) for assembly of 100-nm capsids, and (iii) the interaction of the outer surface of the capsid with the scaffolding proteins requires the product of the UL18 gene (VP23).     

The size and symmetry of B capsids of herpes simplex virus type 1 are determined by the gene products of the UL26 open reading frame.

Herpes simplex virus type 1 (HSV-1) B capsids are composed of seven proteins, designated VP5, VP19C, 21, 22a, VP23, VP24, and VP26 in order of decreasing molecular weight. Three proteins (21, 22a, and VP24) are encoded by a single open reading frame (ORF), UL26, and include a protease whose structure and function have been studied extensively by other investigators. The protease encoded by this ORF generates VP24 (amino acids 1 to 247), a structural component of the capsid and mature virions, and 21 (residues 248 to 635). The protease also cleaves C-terminal residues 611 to 635 of 21 and 22a, during capsid maturation. Protease activity has been localized to the N-terminal 247 residues. Protein 22a and probably the less abundant protein 21 occupy the internal volume of capsids but are not present in virions; therefore, they may form a scaffold that is used for B capsid assembly. The objective of the present study was to isolate and characterize a mutant virus with a null mutation in UL26. Vero cells were transformed with plasmid DNA that encoded ORF UL25 through UL28 and screened for their ability to support the growth of a mutant virus with a null mutation in UL27 (K082). Four of five transformants that supported the growth of the UL27 mutant also supported the growth of a UL27-UL28 double mutant. One of these transformants (F3) was used to isolate a mutant with a null mutation in UL26. The UL26 null mutation was constructed by replacement of DNA sequences specifying codons 41 through 593 with a lacZ reporter cassette. Permissive cells were cotransfected with plasmid and wild-type virus DNA, and progeny viruses were screened for their ability to grow on F3 but not Vero cells. A virus with these growth characteristics, designated KUL26 delta Z, that did not express 21, 22a, or VP24 during infection of Vero cells was isolated. Radiolabeled nuclear lysates from infected nonpermissive cells were layered onto sucrose gradients and subjected to velocity sedimentation. A peak of radioactivity for KUL26 delta Z that sedimented more rapidly than B capsids from wild-type-infected cells was observed. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of the gradient fractions showed that the peak fractions contained VP5, VP19C, VP23, and VP26. Analysis of sectioned cells and of the peak fractions of the gradients by electron microscopy revealed sheet and spiral structures that appear to be capsid shells.(ABSTRACT TRUNCATED AT 400 WORDS)     

The bovine herpesvirus 1 maturational proteinase and scaffold proteins can substitute for the homologous herpes simplex virus type 1 proteins in the formation of hybrid type B capsids.

We determined the nucleotide sequence of a 3.5-kb region of the bovine herpesvirus 1 (BHV-1) genome which contained the complete BHV-1 homologs of the herpes simplex virus type 1 (HSV-1) UL26 and UL26.5 genes. In HSV-1, the UL26 and UL26.5 open reading frames encode scaffold proteins upon which viral capsids are assembled. The UL26-encoded protein is also a proteinase and specifically cleaves both itself and the UL26.5-encoded protein. The overall BHV-1-encoded amino acid sequence showed only 41% identity to the HSV-1 sequences and was most divergent in the regions defined to be involved in the scaffolding function. We substituted the proteins encoded by the BHV-1 homologs of the UL26 and UL26.5 open reading frames, expressed in baculovirus, for the corresponding HSV-1 proteins in an in vitro HSV-1 capsid assembly system. The proteins expressed from the BHV-1 UL26 and UL26.5 homologs facilitated the formation of hybrid type B capsids indistinguishable from those formed entirely with HSV-1-encoded proteins.     

Phenotype of the herpes simplex virus type 1 protease substrate ICP35 mutant virus.

The herpes simplex virus type 1 ICP35 assembly protein is involved in the formation of viral capsids. ICP35 is encoded by the UL26.5 gene and is specifically processed by the herpes simplex virus type 1 protease encoded by the UL26 gene. To better understand the functions of ICP35 in infected cells, we have isolated and characterized an ICP35 mutant virus, delta ICP35. The mutant virus was propagated in complementing 35J cells, which express wild-type ICP35. Phenotypic analysis of delta ICP35 shows that (i) mutant virus growth in Vero cells was severely restricted, although small amounts of progeny virus was produced; (ii) full-length ICP35 protein was not produced, although autoproteolysis of the protease still occurred in mutant-infected nonpermissive cells; (iii) viral DNA replication of the mutant proceeded at wild-type levels, but only a very small portion of the replicated DNA was processed to unit length and encapsidated; (iv) capsid structures were observed in delta ICP35-infected Vero cells by electron microscopy and by sucrose sedimentation analysis; (v) assembly of VP5 into hexons of the capsids was conformationally altered; and (vi) ICP35 has a novel function which is involved in the nuclear transport of VP5.     

Identification of a region in the herpes simplex virus scaffolding protein required for interaction with the portal

The herpes simplex virus type 1 capsid is a protective shell that acts as a container for the genetic material of the virus. After assembly of the capsid, the viral DNA is translocated into the capsid interior through a channel formed by the portal. The portal is composed of a dodecamer of UL6 molecules which form a ring-like structure found at a single vertex within the icosahedron. Formation of portal-containing capsids minimally requires the four structural proteins (VP5, VP19C, VP23, and UL6) and a scaffolding protein (UL26.5). Recently, an interaction between UL26.5 and the portal has been identified, suggesting the scaffold functions by delivering the portal to the growing capsid shell. The aim of this study was to identify regions within UL26.5 required for its interaction with the portal. A specific region was identified by mutational analysis. Deletion of scaffold amino acids (aa) 143 to 151 was found to be sufficient to inhibit formation of the scaffold-portal complex as assayed in vitro. The aa 143 to 151 contain the sequence YYPGE, which is highly conserved among alpha herpesviruses. Although it did not bind to the portal, the Delta143-151 mutant was found to retain the ability to support assembly of morphologically normal capsids in vitro. Such capsids, however, did not contain the portal. The results suggest assembly of portal-containing capsids requires formation of a scaffold-portal complex in which intermolecular contact is dependent on scaffold aa 143 to 151.     

The protease of herpes simplex virus type 1 is essential for functional capsid formation and viral growth.

The herpes simplex virus type 1 protease and related proteins are involved in the assembly of viral capsids. The protease encoded by the UL26 gene can process itself and its substrate ICP35, encoded by the UL26.5 gene. To better understand the functions of the protease in infected cells, we have isolated a complementing cell line (BMS-MG22) and constructed and characterized a null UL26 mutant virus, m100. The mutant virus failed to grow on Vero cells and required a complementing cell line for its propagation, confirming that the UL26 gene product is essential for viral growth. Phenotypic analysis of m100 shows that (i) normal amounts of the c and d forms of ICP35 were produced, but they failed to be processed to the cleaved forms, e and f; (ii) viral DNA replication of the mutant proceeded at near wild-type levels, but DNA was not processed to unit length or encapsidated; (iii) capsid structures were observed in thin sections of m100-infected Vero cells by electron microscopy, but assembly of VP5 into hexons of the capsid structure was conformationally altered; and (iv) nuclear localizations of the protease and ICP35 are independent of each other, and the function(s) of Na, at least in part, is to direct the catalytic domain N(o) to the nucleus.     

Separate functional domains of the herpes simplex virus type 1 protease: evidence for cleavage inside capsids.

The herpes simplex virus type 1 (HSV-1) protease (Pra) and related proteins are involved in the assembly of viral capsids and virion maturation. Pra is a serine protease, and the active-site residue has been mapped to amino acid (aa) 129 (Ser). This 635-aa protease, encoded by the UL26 gene, is autoproteolytically processed at two sites, the release (R) site between amino acid residues 247 and 248 and the maturation (M) site between residues 610 and 611. When the protease cleaves itself at both sites, it releases Nb, the catalytic domain (N0), and the C-terminal 25 aa. ICP35, a substrate of the HSV-1 protease, is the product of the UL26.5 gene. As it is translated from a Met codon within the UL26 gene, ICP35 cd are identical to the C-terminal 329-aa sequence of the protease and are trans cleaved at an identical C-terminal site to generate ICP35 e,f and a 25-aa peptide. Only fully processed Pra (N0 and Nb) and ICP35 (ICP35 e,f) are present in B capsids, which are believed to be precursors of mature virions. Using an R-site mutant A247S virus, we have recently shown that this mutant protease retains enzymatic activity but fails to support viral growth, suggesting that the release of N0 is required for viral replication. Here we report that another mutant protease, with an amino acid substitution (Ser to Cys) at the active site, can complement the A247S mutant but not a protease deletion mutant. Cell lines expressing the active-site mutant protease were isolated and shown to complement the A247S mutant at the levels of capsid assembly, DNA packaging, and viral growth. Therefore, the complementation between the R-site mutant and the active-site mutant reconstituted wild-type Pra function. One feature of this intragenic complementation is that following sedimentation of infected-cell lysates on sucrose gradients, both N-terminally unprocessed and processed proteases were isolated from the fractions where normal B capsids sediment, suggesting that proteolytic processing occurs inside capsids. Our results demonstrate that the HSV-1 protease has distinct functional domains and some of these functions can complement in trans.     

Incorporation of the Green Fluorescent Protein into the Herpes Simplex Virus Type 1 Capsid

The herpes simplex virus type 1 (HSV-1) UL35 open reading frame (ORF) encodes a 12-kDa capsid protein designated VP26. VP26 is located on the outer surface of the capsid specifically on the tips of the hexons that constitute the capsid shell. The bioluminescent jellyfish (Aequorea victoria) green fluorescent protein (GFP) was fused in frame with the UL35 ORF to generate a VP26-GFP fusion protein. This fusion protein was fluorescent and localized to distinct regions within the nuclei of transfected cells following infection with wild-type virus. The VP26-GFP marker was introduced into the HSV-1 (KOS) genome resulting in recombinant plaques that were fluorescent. A virus, designated K26GFP, was isolated and purified and was shown to grow as well as the wild-type virus in cell culture. An analysis of the intranuclear capsids formed in K26GFP-infected cells revealed that the fusion protein was incorporated into A, B, and C capsids. Furthermore, the fusion protein incorporated into the virion particle was fluorescent as judged by fluorescence-activated cell sorter (FACS) analysis of infected cells in the absence of de novo protein synthesis. Cells infected with K26GFP exhibited a punctate nuclear fluorescence at early times in the replication cycle. At later times during infection a generalized cytoplasmic and nuclear fluorescence, including fluorescence at the cell membranes, was observed, confirming visually that the fusion protein was incorporated into intranuclear capsids and mature virions.     

Cell-free assembly of the herpes simplex virus capsid.

Herpes simplex virus type 1 (HSV-1) capsids were found to assemble spontaneously in a cell-free system consisting of extracts prepared from insect cells that had been infected with recombinant baculoviruses coding for HSV-1 capsid proteins. The capsids formed in this system resembled native HSV-1 capsids in morphology as judged by electron microscopy, in sedimentation rate on sucrose density gradients, in protein composition, and in their ability to react with antibodies specific for the HSV-1 major capsid protein, VP5. Optimal capsid assembly required the presence of extracts containing capsid proteins VP5, VP19, VP23, VP22a, and the maturational protease (product of the UL26 gene). Assembly was more efficient at 27 degrees C than at 4 degrees C. The availability of a cell-free assay for HSV-1 capsid formation will be of help in identifying the morphogenetic steps that occur during capsid assembly in vivo and in evaluating candidate antiherpes therapeutics directed at capsid assembly.     

Herpes simplex virus type 1 DNA-packaging protein UL17 is required for efficient binding of UL25 to capsids

Herpes simplex virus type 1 packages its DNA genome into a precursor capsid, referred to as the procapsid. Of the three capsid-associated DNA-packaging proteins, UL17, UL25, and UL6, only UL17 and UL6 appear to be components of the procapsid, with UL25 being added subsequently. To determine whether the association of UL17 or UL25 with capsids was dependent on the other two packaging proteins, B capsids, which lack viral DNA but retain the cleaved internal scaffold, were purified from nonpermissive cells infected with UL17, UL25, or UL6 null mutants and compared with wild-type (wt) B capsids. In the absence of UL17, the levels of UL25 in the mutant capsids were much lower than those in wt B capsids. These results suggest that UL17 is required for efficient incorporation of UL25 into B capsids. B capsids lacking UL25 contained about twofold-less UL17 than wt capsids, raising the possibilities that UL25 is important for stabilizing UL17 in capsids and that the two proteins interact in the capsid. The distribution of UL17 and UL25 on B capsids was examined using immunogold labeling. Both proteins appeared to bind to multiple sites on the capsid. The properties of the UL17 and UL25 proteins are consistent with the idea that the two proteins are important in stabilizing capsid-DNA structures rather than having a direct role in DNA packaging.     

Amino acids 143 to 150 of the herpes simplex virus type 1 scaffold protein are required for the formation of portal-containing capsids

The herpes simplex virus type 1 (HSV-1) portal is composed of a dodecamer of UL6 protein molecules whose incorporation into the capsid is mediated by interaction with the HSV-1 UL26.5 scaffold protein. Previous results with an in vitro capsid assembly assay demonstrated that nine amino acids (amino acids 143 to 151) of the UL26.5 protein are required for its interaction with UL6 and for incorporation of the portal complex into capsids. In the present study an HSV-1 mutant, bvFH411, was isolated and contained a deletion that removed the codons for UL26.5 amino acids 143 to 150. The mutant virus failed to produce infectious virus in noncomplementing cells, and only B capsids that contained only minor amounts of portal protein were made. These data corroborate our previous in vitro studies and demonstrate that amino acids 143 to 150 of UL26.5 are required for the formation of portal-containing HSV-1 capsids.     

The herpes simplex virus 1 gene encoding a protease also contains within its coding domain the gene encoding the more abundant substrate.

The herpes simplex virus 1 open reading frames UL26 and UL26.5 are 3' coterminal. The larger, UL26 open reading frame encodes a protein approximately 80,000 in apparent molecular weight and contains the promoter and coding sequence of the UL26.5 gene, which specifies a capsid protein designated infected cell protein 35. The larger product contains in its entirety the amino acid sequence of the smaller protein. We report that the UL26 gene encodes a protease which catalyzes its own cleavage and that of the more abundant product of UL26.5. By inserting the coding sequence of an epitope to a cytomegalovirus monoclonal antibody and homologs of the immunoglobulin G binding domain of staphylococcal protein A into the 3' termini of the coding domains of the two open reading frames, we identified both products of the cleavage and determined that the cleavage site is approximately 20 amino acids from the carboxyl termini of both proteins.     

The interaction between the major capsid protein and the smallest capsid protein of human cytomegalovirus is dependent on two linear sequences in the smallest capsid protein

The assembly of human cytomegalovirus (HCMV) with recombinant systems has not been accomplished. An understanding of specific interactions between individual capsid proteins could point to unique characteristics of the assembly process of HCMV capsids. Similar to its herpes simplex virus counterpart, VP26 (UL35), the HCMV smallest capsid protein (SCP; UL48/49) decorates hexons in the mature capsid. In contrast to VP26, the HCMV SCP is essential for virus assembly. In this study we have shown that the major capsid protein (MCP) and the SCP interact in the cytoplasm of transfected cells and can be coprecipitated from insect cells expressing the MCP and the SCP. Using a two-hybrid reporter assay, we demonstrated that two linear sequences within the SCP are sufficient for SCP and MCP interactions.     

The C-terminal 25 amino acids of the protease and its substrate ICP35 of herpes simplex virus type 1 are involved in the formation of sealed capsids.

The herpes simplex virus type 1 protease and its substrate, ICP35, are involved in the assembly of viral capsids. Both proteins are encoded by a single open reading frame from overlapping mRNAs. The protease is autoproteolytically processed at two sites. The protease cleaves itself at the C-terminal site (maturation site) and also cleaves ICP35 at an identical site, releasing a 25-amino-acid (aa) peptide from each protein. To determine whether these 25 aa play a role in capsid assembly, we constructed a mutant virus expressing only Prb, the protease without the C-terminal 25 aa. Phenotypic analysis of the Prb virus in the presence and absence of ICP35 shows the following: (i) Prb retains the functional activity of the wild-type protease which supports virus growth in the presence of ICP35; (ii) in contrast to the ICP35 null mutant delta ICP35 virus, the Prb virus fails to grow in the absence of ICP35; and (iii) trans-complementation experiments indicated that full-length ICP35 (ICP35 c,d), but not the cleaved form (ICP35 e,f), complements the growth of the Prb virus. The most striking phenotype of the Prb virus is that only unsealed aberrant capsid structures are observed by electron microscopy in mutant-infected Vero cells. Our results demonstrate that the growth of herpes simplex virus type 1 requires the C-terminal 25 aa of either the protease or its substrate, ICP35, and that the C-terminal 25 aa are involved in the formation of sealed capsids.     

Herpes simplex virus DNA cleavage and packaging proteins associate with the procapsid prior to its maturation

Packaging of DNA into preformed capsids is a fundamental early event in the assembly of herpes simplex virus type 1 (HSV-1) virions. Replicated viral DNA genomes, in the form of complex branched concatemers, and unstable spherical precursor capsids termed procapsids are thought to be the substrates for the DNA-packaging reaction. In addition, seven viral proteins are required for packaging, although their individual functions are undefined. By analogy to well-characterized bacteriophage systems, the association of these proteins with various forms of capsids, including procapsids, might be expected to clarify their roles in the packaging process. While the HSV-1 UL6, UL15, UL25, and UL28 packaging proteins are known to associate with different forms of stable capsids, their association with procapsids has not been tested. Therefore, we isolated HSV-1 procapsids from infected cells and used Western blotting to identify the packaging proteins present. Procapsids contained UL15 and UL28 proteins; the levels of both proteins are diminished in more mature DNA-containing C-capsids. In contrast, UL6 protein levels were approximately the same in procapsids, B-capsids, and C-capsids. The amount of UL25 protein was reduced in procapsids relative to that in more mature B-capsids. Moreover, C-capsids contained the highest level of UL25 protein, 15-fold higher than that in procapsids. Our results support current hypotheses on HSV DNA packaging: (i) transient association of UL15 and UL28 proteins with maturing capsids is consistent with their proposed involvement in site-specific cleavage of the viral DNA (terminase activity); (ii) the UL6 protein may be an integral component of the capsid shell; and (iii) the UL25 protein may associate with capsids after scaffold loss and DNA packaging, sealing the DNA within capsids.     

Herpes simplex virus capsids assembled in insect cells infected with recombinant baculoviruses: structural authenticity and localization of VP26.

Recently, recombinant baculoviruses have been used to show that expression of six herpes simplex virus type 1 genes results in the formation of capsid-like particles. We have applied cryoelectron microscopy and three-dimensional image reconstruction to establish their structural authenticity to a resolution of approximately 2.7 nm. By comparing capsids assembled with and without the expression of gene UL35, we have confirmed the presence of six copies of its product, VP26 (12 kDa), around each hexon tip. However, VP26 is not present on pentons, indicating that the conformational differences between the hexon and penton states of the major capsid protein, VP5, extend to the VP26 binding site.     

Disulfide bond formation contributes to herpes simplex virus capsid stability and retention of pentons

Disulfide bonds reportedly stabilize the capsids of several viruses, including papillomavirus, polyomavirus, and simian virus 40, and have been detected in herpes simplex virus (HSV) capsids. In this study, we show that in mature HSV-1 virions, capsid proteins VP5, VP23, VP19C, UL17, and UL25 participate in covalent cross-links, and that these are susceptible to dithiothreitol (DTT). In addition, several tegument proteins were found in high-molecular-weight complexes, including VP22, UL36, and UL37. Cross-linked capsid complexes can be detected in virions isolated in the presence and absence of N-ethylmaleimide (NEM), a chemical that reacts irreversibly with free cysteines to block disulfide formation. Intracellular capsids isolated in the absence of NEM contain disulfide cross-linked species; however, intracellular capsids isolated from cells pretreated with NEM did not. Thus, the free cysteines in intracellular capsids appear to be positioned such that disulfide bond formation can occur readily if they are exposed to an oxidizing environment. These results indicate that disulfide cross-links are normally present in extracellular virions but not in intracellular capsids. Interestingly, intracellular capsids isolated in the presence of NEM are unstable; B and C capsids are converted to a novel form that resembles A capsids, indicating that scaffold and DNA are lost. Furthermore, these capsids also have lost pentons and peripentonal triplexes as visualized by cryoelectron microscopy. These data indicate that capsid stability, and especially the retention of pentons, is regulated by the formation of disulfide bonds in the capsid.     

Herpes simplex virus 1 DNA packaging proteins encoded by UL6, UL15, UL17, UL28, and UL33 are located on the external surface of the viral capsid

Studies to localize the herpes simplex virus 1 portal protein encoded by UL6, the putative terminase components encoded by UL15, UL 28, and UL33, the minor capsid proteins encoded by UL17, and the major scaffold protein ICP35 were conducted. ICP35 in B capsids was more resistant to trypsin digestion of intact capsids than pUL6, pUL15, pUL17, pUL28, or pUL33. ICP35 required sectioning of otherwise intact embedded capsids for immunoreactivity, whereas embedding and/or sectioning decreased the immunoreactivities of pUL6, pUL17, pUL28, and pUL33. Epitopes of pUL15 were recognized roughly equally well in both sectioned and unsectioned capsids. These data indicate that pUL6, pUL17, pUL28, pUL33, and at least some portion of pUL15 are located at the external surface of the capsid.