Mapping of calmodulin and Gbetagamma binding domains within the C-terminal region of the metabotropic glutamate receptor 7A

Ca(2+)/calmodulin (Ca(2+)/CaM) and the betagamma subunits of heterotrimeric G-proteins (Gbetagamma) have recently been shown to interact in a mutually exclusive fashion with the intracellular C terminus of the presynaptic metabotropic glutamate receptor 7 (mGluR 7). Here, we further characterized the core CaM and Gbetagamma binding sequences. In contrast to a previous report, we find that the CaM binding motif localized in the N-terminal region of the cytoplasmic tail domain of mGluR 7 is conserved in the related group III mGluRs 4A and 8 and allows these receptors to also bind Ca(2+)/CaM. Mutational analysis of the Ca(2+)/CaM binding motif is consistent with group III receptors containing a conventional CaM binding site formed by an amphipathic alpha-helix. Substitutions adjacent to the core CaM target sequence selectively prevent Gbetagamma binding, suggesting that the CaM-dependent regulation of signal transduction involves determinants that overlap with but are different from those mediating Gbetagamma recruitment. In addition, we present evidence that Gbetagamma uses distinct nonoverlapping interfaces for interaction with the mGluR 7 C-terminal tail and the effector enzyme adenylyl cyclase II, respectively. Although Gbetagamma-mediated signaling is abolished in receptors lacking the core CaM binding sequence, alpha subunit activation, as assayed by agonist-dependent GTPgammaS binding, was not affected. This suggests that Ca(2+)/CaM may alter the mode of group III mGluR signaling from mono- (alpha) to bidirectional (alpha and betagamma) activation of downstream effector cascades.     

Effects of pH and calcium ions on the conformational transitions in silk fibroin using 2D Raman correlation spectroscopy and 13C solid-state NMR

Silk fibroin exists in a number of different states, such as silk I and silk II, with different properties largely defined by differences in secondary structure composition. Numerous attempts have been made to control the transitions from silk I to silk II in vitro to produce high-performance materials. Of all the factors influencing the structural compositions, pH and some metal ions play important roles. This paper focuses on the influence of pH and Ca(2+) ions on the conformational transition from silk I to silk II in regenerated (redissolved) Bombyx mori fibroin. One- and two-dimensional correlation Raman spectroscopy was used to describe qualitatively the transitions in secondary structure in silk I, silk II, and their intermediates as pH and Ca(2+) ion concentration were changed, while (13)C cross polarization magic angle spinning (CP/MAS) solid-state NMR was used to quantify these changes. We showed that conditions (low pH, pH 5.2; a defined range of Ca(2+) ion concentrations; gradual water removal) that mimic natural silk spinning promote the formations of beta-sheet and distorted beta-sheet characteristic of silk II or silk II-related intermediate. In contrast, higher pH (pH 6.9-8.0) and higher Ca(2+) ion concentrations maintain "random coil" conformations typical of silk I or silk I-related intermediate. These results help to explain why the natural silk spinning process is attended by a reduction in pH from 6.9 to 4.8 and a change in the Ca(2+) ion concentration in the gland lumen as fibroin passes from the posterior division through the secretory pathway to the anterior division.     

Determinants for calmodulin binding on voltage-dependent Ca2+ channels

Calmodulin, bound to the alpha(1) subunit of the cardiac L-type calcium channel, is required for calcium-dependent inactivation of this channel. Several laboratories have suggested that the site of interaction of calmodulin with the channel is an IQ-like motif in the carboxyl-terminal region of the alpha(1) subunit. Mutations in this IQ motif are linked to L-type Ca(2+) current (I(Ca)) facilitation and inactivation. IQ peptides from L, P/Q, N, and R channels all bind Ca(2+)calmodulin but not Ca(2+)-free calmodulin. Another peptide representing a carboxyl-terminal sequence found only in L-type channels (designated the CB domain) binds Ca(2+)calmodulin and enhances Ca(2+)-dependent I(Ca) facilitation in cardiac myocytes, suggesting the CB domain is functionally important. Calmodulin blocks the binding of an antibody specific for the CB sequence to the skeletal muscle L-type Ca(2+) channel, suggesting that this is a calmodulin binding site on the intact protein. The binding of the IQ and CB peptides to calmodulin appears to be competitive, signifying that the two sequences represent either independent or alternative binding sites for calmodulin rather than both sequences contributing to a single binding site.     

Bioinspired silicification of silica-binding peptide-silk protein chimeras: comparison of chemically and genetically produced proteins

Novel protein chimeras constituted of "silk" and a silica-binding peptide (KSLSRHDHIHHH) were synthesized by genetic or chemical approaches and their influence on silica-silk based chimera composite formation evaluated. Genetic chimeras were constructed from 6 or 15 repeats of the 32 amino acid consensus sequence of Nephila clavipes spider silk ([SGRGGLGGQG AGAAAAAGGA GQGGYGGLGSQG](n)) to which one silica binding peptide was fused at the N terminus. For the chemical chimera, 28 equiv of the silica binding peptide were chemically coupled to natural Bombyx mori silk after modification of tyrosine groups by diazonium coupling and EDC/NHS activation of all acid groups. After silica formation under mild, biomaterial-compatible conditions, the effect of peptide addition on the properties of the silk and chimeric silk-silica composite materials was explored. The composite biomaterial properties could be related to the extent of silica condensation and to the higher number of silica binding sites in the chemical chimera as compared with the genetically derived variants. In all cases, the structure of the protein/chimera in solution dictated the type of composite structure that formed with the silica deposition process having little effect on the secondary structural composition of the silk-based materials. Similarly to our study of genetic silk based chimeras containing the R5 peptide (SSKKSGSYSGSKGSKRRIL), the role of the chimeras (genetic and chemical) used in the present study resided more in aggregation and scaffolding than in the catalysis of condensation. The variables of peptide identity, silk construct (number of consensus repeats or silk source), and approach to synthesis (genetic or chemical) can be used to "tune" the properties of the composite materials formed and is a general approach that can be used to prepare a range of materials for biomedical and sensor-based applications.     

Conformational transitions in model silk peptides

Protein structural transitions and beta-sheet formation are a common problem both in vivo and in vitro and are of critical relevance in disparate areas such as protein processing and beta-amyloid and prion behavior. Silks provide a "databank" of well-characterized polymorphic sequences, acting as a window onto structural transitions. Peptides with conformationally polymorphic silk-like sequences, expected to exhibit an intractable beta-sheet form, were characterized using Fourier transform infrared spectroscopy, circular dichroism, and electron diffraction. Polymorphs resembling the silk I, silk II (beta-sheet), and silk III (threefold polyglycine II-like helix) crystal structures were identified for the peptide fibroin C (GAGAGS repetitive sequence). Two peptides based on silk amorphous sequences, fibroin A (GAGAGY) and fibroin V (GDVGGAGATGGS), crystallized as silk I under most conditions. Methanol treatment of fibroin A resulted in a gradual transition from silk I to silk II, with an intermediate state involving a high proportion of beta-turns. Attenuated total reflectance Fourier transform infrared spectroscopy has been used to observe conformational changes as the peptides adsorb from solution onto a hydrophobic surface. Fibroin C has a beta-strand structure in solution but adopts a silk I-like structure upon adsorption, which when dried on the ZnSe crystal contains silk III crystallites.     

Peptide sequence analysis and molecular cloning reveal two calcium pump isoforms in the human erythrocyte membrane

The sequence of more than 1,000 amino acid residues, derived from two different isoforms, has been determined from peptides generated from purified human erythrocyte membrane Ca2(+)-ATPase (hPMCA). Several of these peptide sequences correspond to the previously reported, cDNA deduced sequence of the "teratoma" Ca2+ pump isoform hPMCA1 (Verma, A. K., Filoteo, A. G., Stanford, D. R., Wieben, E. D., Penniston, J. T., Strehler, E. E., Fischer, R., Heim, R., Vogel, G., Matthews, S., Strehler-Page, M.-A., James, P., Vorherr, T., Krebs, J., and Carafoli, E. (1988) J. Biol. Chem. 263, 14152-14159). The complete primary structure of a novel isoform (hPMCA3) has been determined by molecular cloning and nucleotide sequencing of its corresponding cDNA. This new member of the plasma membrane Ca2+ pump family consists of 1,205 amino acid residues with a calculated Mr of 133,930, and it shows 88% similarity (75% identity) with the previously sequenced pump isoform. Specific probes detect major mRNA species of 5.6 kilobases for hPMCA1, and of 7.5 kilobases for hPMCA3, on Northern blots of human K562 erythroleukemic cell RNA. A large number of peptide sequences match perfectly with only one or the other of these isoforms and all peptides (with 6 exceptions corresponding to a contaminant protein or to a third minor Ca2+ pump isoform) are found in either only one or in both of the isoforms. The two erythrocyte Ca2+ pumps display high sequence divergence in a few localized regions that may determine isoform-specific functional specializations; for example, the putative extracellular loop separating transmembrane domains 1 and 2, the highly negatively charged region previously suggested to be involved in Ca2+ binding, and the site of cAMP-dependent protein kinase phosphorylation.     

Repertoire selection of variant single-chain Cro: toward directed DNA-binding specificity of helix-turn-helix proteins

A single-chain derivative of the lambda Cro repressor (scCro) has been randomly mutated in amino acid residues critical for specific DNA recognition to create libraries of protein variants. Utilizing phage display-afforded affinity selection, scCro variants have been isolated for binding to synthetic DNA ligands. Isolated scCro variants were analyzed functionally, both in fusion with phage particles and after expression of the corresponding free proteins. The binding properties with regard to specificity and affinity in binding to different DNA ligands were investigated by inhibition studies and determination of equilibrium dissociation constants for formed complexes. Variant proteins with altered DNA-sequence specificity were identified, which favored binding of targeted synthetic DNA sequences over a consensus operator sequence, bound with high affinity by wild-type Cro. The specificities were relatively modest (2-3-fold, as calculated from K(D) values), which can be attributed to the inherent properties in the design of the selection system; one half-site of the synthetic DNA sequences maintains the consensus operator sequence, and one "subunit" of the variant single-chain Cro dimers was conserved as wild-type sequence. The anticipated interaction between the wild-type subunit and the consensus DNA half-site of target DNA ligands is, hence, expected to contribute to the overlap in sequence discrimination. The binding affinity for the synthetic DNA sequences, however, was improved 10-30-fold in selected variant proteins as compared to "wild-type" scCro.     

Structural basis for the higher Ca(2+)-activation of the regulated actin-activated myosin ATPase observed with Dictyostelium/Tetrahymena actin chimeras

Replacement of residues 228-230 or 228-232 of subdomain 4 in Dictyostelium actin with the corresponding Tetrahymena sequence (QTA to KAY replacement: half chimera-1; QTAAS to KAYKE replacement: full chimera) leads to a higher Ca(2+)-activation of the regulated acto-myosin subfragment-1 ATPase activity. The ratio of ATPase activation in the presence of tropomyosin-troponin and Ca(2+) to that without tropomyosin-troponin becomes about four times as large as the ratio for the wild-type actin. To understand the structural basis of this higher Ca(2+)-activation, we have determined the crystal structures of the 1:1 complex of Dictyostelium mutant actins (half chimera-1 and full chimera) with gelsolin segment-1 to 2.0 A and 2.4 A resolution, respectively, together with the structure of wild-type actin as a control. Although there were local changes on the surface of the subdomain 4 and the phenolic side-chain of Tyr230 displaced the side-chain of Leu236 from a non-polar pocket to a more solvent-accessible position, the structures of the actin chimeras showed that the mutations in the 228-232 region did not introduce large changes in the overall actin structure. This suggests that residues near position 230 formed part of the tropomyosin binding site on actin in actively contracting muscle. The higher Ca(2+)-activation observed with A230Y-containing mutants can be understood in terms of a three-state model for thin filament regulation in which, in the presence of both Ca(2+) and myosin heads, the local changes of actin generated by the mutation (especially its phenolic side-chain) facilitate the transition of thin filaments from a "closed" state to an "open" state. Between 394 and 469 water molecules were identified in the different structures and it was found that actin recognizes hydrated forms of the adenine base and the Ca ion in the nucleotide binding site.     

Regulation of nerve terminal calcium channel selectivity by a weak acid site.

The effects of low pH, and of alkaline earth cations, were examined on calcium uptake by pinched-off nerve terminals (synaptosomes). This uptake appears to be mediated by voltage-sensitive Ca channels (J. Physiol. 247:617, 1975). Ca uptake was measured in low (5 mM) or high (77 mM) potassium media. The extra uptake promoted by depolarizing (K-rich) media was almost maximal at pH 7.5, and decreased as the pH was lowered. Data relating depolarization-induced 45Ca uptake to pH fit a titration curve with a pKa approximately 6. Experiments in which Ca concentration and pH were both varied indicated that Ca2+ and H+ compete for a common binding site. Inhibition of depolarization-induced 45Ca uptake by the alkaline earth cations was studied to determine the apparent binding sequence for these cations in the Ca channels: Ca greater than Sr greater than Ba greater than Mg. This sequence resembles that observed for block of Ca channels in other preparations. The apparent binding sequence of the alkaline earth cations and the apparent pKa (approximately 6) of the Ca-binding site indicate that the Ca channel is a "high field strength" system. Protonation of a Ca channel binding site could explain the inhibitory effect of low pH on Ca-dependent neurotransmitter release (cf. Del Castillo et al., J. Cell. Comp. Physiol. 59:35, 1962).     

Isolation of a Drosophila gene coding for a protein containing a novel phosphatidylserine-binding motif

To elucidate the molecular basis of the binding of proteins to the membrane phospholipid phosphatidylserine (PS), we characterized PS-binding peptides isolated from a phage display library. Amino acid sequences deduced from the nucleotide sequences of over 60 phage clones isolated revealed that there was no common primary structure among these peptides, but all peptides were rich in basic amino acid residues. In particular, 15 clones encoded peptides that contained contiguous arginine residues. Characterization of two such peptides in more detail showed that they bound to PS, and to a much lower extent to other phospholipids, including phosphatidylinositol, phosphatidylethanolamine, and phosphatidylcholine. Unlike other Ca2+-dependent PS-binding proteins, these peptides did not require Ca2+ for binding to PS, and the addition of Ca2+ did not alter the phospholipid specificity. Substitution of one of the two RR sequences in one peptide by alanine had no effect, but that of both sequences completely abolished the activity. Furthermore, we identified a Drosophila gene coding for a presumed nuclear protein that shares an amino acid sequence, including a RR residue, with one of the two PS-binding peptides. This protein bound to PS partly depending on the presence of the RR residue. These results allowed us to conclude that an amino acid sequence including contiguous arginine residues is a novel motif that defines Ca2+-independent PS-binding activity.     

Regulatory interaction of sodium channel IQ-motif with calmodulin C-terminal lobe

An increasing number of ion channels have been found to be regulated by the direct binding of calmodulin (CaM), but its structural features are mostly unknown. Previously, we identified the Ca(2+)-dependent and -independent interactions of CaM to the voltage-gated sodium channel via an IQ-motif sequence. In this study we used the trypsin-digested CaM fragments (TR(1)C and TR(2)C) to analyze the binding of Ca(2+)-CaM or Ca(2+)-free (apo) CaM with a sodium channel-derived IQ-motif peptide (NaIQ). Circular dichroic spectra showed that NaIQ peptide enhanced alpha-helicity of the CaM C-terminal lobe, but not that of the CaM N-terminal lobe in the absence of Ca(2+), whereas NaIQ enhanced the alpha-helicity of both the N- and C-terminal lobes in the presence of Ca(2+). Furthermore, the competitive binding experiment demonstrated that Ca(2+)-dependent CaM binding of target peptides (MLCKp or melittin) with CaM was markedly suppressed by NaIQ. The results suggest that IQ-motif sequences contribute to prevent target proteins from activation at low Ca(2+) concentrations and may explain a regulatory mechanism why highly Ca(2+)-sensitive target proteins are not activated in the cytoplasm.     

Synthesis and characterization of chimeric silkworm silk

A synthetic gene encoding a chimeric silklike protein was constructed that combined a polyalanine encoding region (Ala)(18), a sequence slightly longer than the (Ala)(12-13) found in the silk fibroin from the wild silkworm Samia cynthia ricini, and a sequence encoding GVGAGYGAGAGYGVGAGYGAGVGYGAGAGY, found in the silk fibroin from the silkworm Bombyx mori. A tetramer of the chimeric repeat sequence encoding a approximately 29 kDa protein was expressed as a fusion protein in Escherichia coli. In comparison to S. c. ricini silk, the chimeric protein demonstrated improved solubility because it could be dissolved in 8 M urea. The purified protein assumed an alpha-helical structure based on solid-state (13)C CP/MAS NMR and was less prone to conformational transition to a beta-sheet, unlike native silk proteins from S. c. ricini. Model peptides representing the crystalline region of S. c. ricini silk fibroin, (Ala)(12) and (Ala)(18), formed beta-sheet structures. Therefore, the solubility and structural transitions of the chimeric protein were significantly altered through the formation of this chimeric silk. This experimental strategy to the study of silk structure and function can be used to develop an improved understanding of the contributions of protein domains in repetitive silkworm and spider silk sequences to structure development and structural transitions.     

Fifty years later: The sequence, structure and function of lacewing cross-beta silk

Classic studies of protein structure in the 1950s and 1960s demonstrated that green lacewing egg stalk silk possesses a rare native cross-beta sheet conformation. We have identified and sequenced the silk genes expressed by adult females of a green lacewing species. The two encoded silk proteins are 109 and 67 kDa in size and rich in serine, glycine and alanine. Over 70% of each protein sequence consists of highly repetitive regions with 16-residue periodicity. The repetitive sequences can be fitted to an elegant cross-beta sheet structural model with protein chains folded into regular 8-residue long beta strands. This model is supported by wide-angle X-ray scattering data and tensile testing from both our work and the original papers. We suggest that the silk proteins assemble into stacked beta sheet crystallites bound together by a network of cystine cross-links. This hierarchical structure gives the lacewing silk high lateral stiffness nearly threefold that of silkworm silk, enabling the egg stalks to effectively suspend eggs and protect them from predators.     

Structural study of irregular amino acid sequences in the heavy chain of Bombyx mori silk fibroin

Recently, genetic studies have revealed the entire amino acid sequence of Bombyx mori silk fibroin. It is known from X-ray diffraction studies that the beta-sheet crystalline structure (silk II) of fibroin is composed of hexaamino acid sequences of GAGAGS. However, in the heavy chain of B. mori silk fibroin, there are also present 11 irregular sequences, with about 31 amino acid residues (irregular GT approximately GT sequences). The structure and role of these irregular sequences have remained unknown. One of the most frequently appearing irregular sequences was synthesized and its 3-D solution structure was studied by high-resolution 2-D NMR techniques. The 3-D structure determined for this peptide shows that it makes a loop structure (distorted omega shape), which implies that the preceding backbone direction is changed by 180 degrees, i.e., reversed, by this sequence. This may facilitate the beta-sheet formation between the crystal-forming building blocks, GAGAGS/GY approximately GY sequences, in the fibroin heavy chain.     

Calmodulin binding to the C-terminus of the small-conductance Ca2+-activated K+ channel hSK1 is affected by alternative splicing

We identified three splice variants of hSK1 whose C-terminal structures are determined by the independent deletion of two contiguous nucleotide sequences. The upstream sequence extends 25 bases in length, is initiated by a donor splice site within exon 8, and terminates at the end of the exon. The downstream sequence consists of nine bases that compose exon 9. When the upstream sequence (hSK1(-)(25b)) or both sequences (hSK1(-)(34b)) are deleted, truncated proteins are encoded in which the terminal 118 amino acids are absent. The binding of calmodulin to these variants is diminished, particularly in the absence of Ca2+ ions. The first 20 amino acids of the segment deleted from hSK1(-)(25b) and hSK1(-)(34b) contain a 1-8-14 Ca2+ calmodulin binding motif, and synthetic oligopeptides based on this region bind calmodulin better in the presence than absence of Ca2+ ions. When the downstream sequence (hSK1(-)(9b)) alone is deleted, only the three amino acids A452, Q453, and K454 are removed, and calmodulin binding is not reduced. On the basis of the relative abundance of mRNA encoding each of the four isoforms, the full-length variant appears to account for most hSK1 in the human hippocampus, while hSK1(-)(34b) predominates in reticulocytes, and hSK1(-)(9b) is especially abundant in human erythroleukemia cells in culture. We conclude that the binding of calmodulin by hSK1 can be modulated through alternative splicing.     

Molecular model for DNA recognition by the family of basic-helix-loop-helix-zipper proteins.

The basic-helix-loop-helix-zipper (bHLH-Zip) motif is a conserved region of approximately 70 amino acids that mediates both sequence-specific DNA binding and protein dimerization. This motif is found in protein sequences from many eukaryotic organisms and is contained in the protein sequence of the oncogene myc and its partner max, and a shortened version of the motif (bHLH) is found in the muscle determination factor myoD and its partner E12. An evaluation of the conserved amino acids that define the motif coupled with the published mutagenic studies of this region has led to our formulation of a molecular model for the binding of this motif as a dimer to specific sequences of DNA. This model has the dimeric protein interacting with an abutted, dyad-symmetric DNA sequence. Helix 2 of each monomer is modeled as a coiled-coil extension of the C-terminal "leucine zipper." Helix 1 does not interact with helix 1 from its partner in the dimer but with the hydrophobic surface created when the helix 2 regions of the dimer interact with each other as a coiled-coil. Sequence-specific interactions are proposed between the basic region and the invariant cis elements that all bHLH-Zip proteins bind.     

A230Y mutation of actin on subdomain 4 is sufficient for higher calcium activation of actin-activated myosin adenosinetriphosphatase in the presence of tropomyosin-troponin

To probe the mechanism by which Ca(2+) activates muscle contraction through tropomyosin and troponin, we have produced mutant actins using Dictyostelium discoideum. We focused on the sequence 228-232 (QTAAS) that is located in subdomain 4 of actin, because the chimera actin in which this sequence was replaced by KAYKE showed not only poorer tropomyosin binding but also the unexpected "higher Ca(2+) activation" [Saeki, K., et al. (1996) Biochemistry 35, 14465-14472]. We found that this higher Ca(2+) activation is solely due to the A230Y mutagenesis. Because A230Y mutant actin showed normal tropomyosin binding, the higher Ca(2+) activation is not the consequence of poorer tropomyosin binding. The significance of these results is discussed in view of a three-state model [McKillop, D. F., Geeves, M. A. (1993) Biophys. J. 65, 693-701].