Conformation of the coat protein of filamentous bacteriophage Pf1 determined by neutron diffraction from magnetically oriented gels of specifically deuterated virions

The structure of filamentous bacteriophage Pf1 has been studied using neutron diffraction from magnetically oriented gels of native and valine-deuterated phage. Neutron diffraction intensities were measured to approximately 8 A resolution along the equator and first six layer-lines, and differences due to the deuterated valine residues were apparent. Analysis of equatorial data indicate that one valine residue is located at a radius of about 13 A, three are in the hydrophobic center of the protein coat at an average of about 22 A radius, and one is near the outer surface of the virion at about 28 A radius. Analysis of the three-dimensional data was initiated using the rod model for the alpha-helices of the coat protein derived from earlier X-ray diffraction studies. This model was refined against the neutron diffraction intensities from native phage to obtain a phase set that was used to calculate a difference map between the valine-deuterated and native phage. The difference map exhibits peaks that correspond to the positions of the five valine residues in the coat protein. From the amino acid sequence and the alpha-helical conformation of the coat protein, the five valine residues can be unambiguously assigned to the difference peaks. This assignment indicates that the two alpha-helices of the coat protein are parallel to one another, connected by a short stretch of non-helical peptide. The valine positions also indicate that the helical surface lattice of the phage particle is right-handed.     

Interactions of the 26-39 fragment of the cro protein from lambda bacteriophage with nucleic acids

A tetradecapeptide with a sequence identical to residues 26-39 of the cro protein from bacteriophage lambda has been synthesized. This peptide has no secondary structure in an aqueous buffer but adopts an alpha-helical conformation in the presence of 20% hexafluoroisopropanol. The fluorescence of the single tyrosyl residue of the cro protein fragment is quenched upon binding to nucleic acids. Proton magnetic resonance has been used to investigate complex formation of the cro protein fragment with a self-complementary decadeoxynucleotide d(AATTGCAATT). Changes in resonance positions and linewidths have been observed for both partners in the 4 complexes which are obtained when either the single-stranded or double-stranded oligonucleotide is mixed with either the random coil or the alpha-helical peptide. These studies are presently extended to the specific complex formed by the cro protein fragment with the OR3 operator sequence.     

Reconstitution of the M13 major coat protein and its transmembrane peptide segment on a DNA template

The major coat protein (pVIII) of M13 phage is of particular interest to structure biologists since it functions in two different environments: during assembly and infection, it interacts with the bacterial lipid bilayer, but in the phage particle, it exists as a protein capsid to protect a closed circular, single-stranded DNA (ssDNA) genome. We synthesized pVIII and a 32mer peptide consisting of the transmembrane and DNA binding domains of pVIII. The 32mer peptide displays typically an alpha-helical structure in trifluroethanol or 0.2 M octylglucoside solutions similar to pVIII. Attachment of polyethylene glycol (PEG) onto the N-terminal of 32mer increased the alpha-helical content and the peptide thermal stability. The peptides were reconstituted with DNA from a detergent solution into a discrete (<200 nm diameter) nanoparticle on both linear double-stranded DNA (dsDNA) and linear ssDNA, where the linear dsDNA is used to mimic the closed circular, ssDNA in M13 phage, upon removal of the detergent. The peptide/DNA particle was an irregular and not a rod-shaped aggregate when imaged by atomic force microscopy. All three peptides underwent a structural transition from alpha-helix to beta-sheet within approximately 1 h of DNA addition to the detergent solution. There was a further decrease in alpha-helical content when the detergent was removed. The presence of anionic (such as octanoic acid) or cationic (such as 1,5-diaminopentane) molecules in the detergent mixture resulted in the retention of the peptide alpha-helical structure. Thus the interaction between the peptide and DNA in octylglucoside is driven by electrostatic forces, and peptide-peptide interactions are responsible for the transition from alpha-helix to beta-sheet conformation in pVIII and its analogues. These results suggest that the assembly process to form a rod-shaped phage is a delicate balance to maintain pVIII in an alpha-helical conformation that requires either an oriented bilayer to solubilize pVIII prior to interaction with the DNA or other phage proteins to nucleate pVIII in the alpha-helical conformation on the DNA.     

De novo design of peptide immunogens that mimic the coiled coil region of human T-cell leukemia virus type-1 glycoprotein 21 transmembrane subunit for induction of native protein reactive neutralizing antibodies

Peptide vaccines able to induce high affinity and protective neutralizing antibodies must rely in part on the design of antigenic epitopes that mimic the three-dimensional structure of the corresponding region in the native protein. We describe the design, structural characterization, immunogenicity, and neutralizing potential of antibodies elicited by conformational peptides derived from the human T-cell leukemia virus type 1 (HTLV-1) gp21 envelope glycoprotein spanning residues 347-374. We used a novel template design and a unique synthetic approach to construct two peptides (WCCR2T and CCR2T) that would each assemble into a triple helical coiled coil conformation mimicking the gp21 crystal structure. The peptide B-cell epitopes were grafted onto the epsilon side chains of three lysyl residues on a template backbone construct consisting of the sequence acetyl-XGKGKGKGCONH2 (where X represents the tetanus toxoid promiscuous T cell epitope (TT) sequence 580-599). Leucine substitutions were introduced at the a and d positions of the CCR2T sequence to maximize helical character and stability as shown by circular dichroism and guanidinium hydrochloride studies. Serum from an HTLV-1-infected patient was able to recognize the selected epitopes by enzyme-linked immunosorbent assay (ELISA). Mice immunized with the wild-type sequence (WCCR2T) and the mutant sequence (CCR2T) elicited high antibody titers that were capable of recognizing the native protein as shown by flow cytometry and whole virus ELISA. Sera and purified antibodies from immunized mice were able to reduce the formation of syncytia induced by the envelope glycoprotein of HTLV-1, suggesting that antibodies directed against the coiled coil region of gp21 are capable of disrupting cell-cell fusion. Our results indicate that these peptides represent potential candidates for use in a peptide vaccine against HTLV-1.     

Dual DNA recognition codes of a short peptide derived from the basic leucine zipper protein EmBP1

Sequence-specific DNA binding of short peptide dimers derived from a plant basic leucine zipper protein EmBP1 was studied. A homodimer of the EmBP1 basic region peptide recognized a palindromic DNA sequence, and a heterodimer of EmBP1 and GCN4 basic region peptides targets a non-palindromic DNA sequence when a beta-cyclodextrin/adamantane complex is utilized as a dimerization domain. A homodimer of the EmBP1 basic region peptide binds the native EmBP1 binding 5'-GCCACGTGGC-3' and the native GCN4 binding 5'-ATGACGTCAT-3' sequences with almost equal affinity in the alpha-helical conformation, indicating that the basic region of EmBP1 by itself has a dual recognition codes for the DNA sequences. The GCN4 basic region peptide binds 5'-ATGAC-3' in the alpha-helical conformation, but it neither shows affinity nor helix formation with 5'-GCCAC-3'. Because native EmBP1 forms 100 times more stable complex with 5'-GCCACGTGGC-3' over 5'-ATGACGTCAT-3', our results suggest that the sequence-selectivity of native EmBP1 is dictated by the structure of leucine zipper dimerization domain including the hinge region spanning between the basic region and the leucine zipper.     

Synthesis and NMR solution structure of an alpha-helical hairpin stapled with two disulfide bridges

Helical coiled-coils and bundles are some of the most common structural motifs found in proteins. Design and synthesis of alpha-helical motifs may provide interesting scaffolds that can be useful as host structures to display functional sites, thus allowing the engineering of novel functional miniproteins. We have synthesized a 38-amino acid peptide, alpha2p8, encompassing the alpha-helical hairpin present in the structure of p8MTCP1, as an alpha-helical scaffold particularly promising for its stability and permissiveness of sequence mutations. The three-dimensional structure of this peptide has been solved using homonuclear two-dimensional NMR techniques at 600 MHz. After sequence specific assignment, a total of 285 distance and 29 dihedral restraints were collected. The solution structure of alpha2p8 is presented as a set of 30 DIANA structures, further refined by restrained molecular dynamics, using simulated annealing protocol with the AMBER force field. The RMSD values for the backbone and all heavy atoms are 0.65+/-0.25 and 1.51+/-0.21 A, respectively. Excised from its protein context, the alpha-hairpin keeps its native structure: an alpha-helical coiled-coil, similar to that found in superhelical structures, with two helices spanning residues 4-16 and 25-36, and linked by a short loop. This motif is stabilized by two interhelical disulfide bridges and several hydrophobic interactions at the helix interface, leaving most of its solvent-exposed surface available for mutation. This alpha-helical hairpin, easily amenable to synthetic chemistry and biological expression system, may represent a stable and versatile scaffold to display new functional sites and peptide libraries.     

Selection and characterization of cell binding and internalizing phage antibodies

Many therapeutic targets are cell surface receptors, which can be challenging antigens for antibody generation. For many therapeutic applications, one needs antibodies that not only bind the cell surface receptor but also are internalized into the cell. This allows use of the antibody to deliver various payloads into the cell to achieve a therapeutic effect. Phage antibody technology has proven a powerful tool for the generation and optimization of human antibodies to any antigen. While applied to the generation of antibodies to purified proteins, it is possible to directly select cell binding and internalizing antibodies on cells. Potential advantages of this approach include: cell surface receptors are in native conformation on intact cells while this might not be so for recombinant proteins; antibodies can be selected for both cell binding and internalization properties; the antibodies can be used to identify their tumor associated antigens; and such antibodies can be used for human treatment directly since they are human in sequence. This review will discuss the factors that impact the successful selection of cell binding and internalizing antibodies. These factors include the cell types used for selection, the impact of different phage antibody library formats, and the specific selection protocols used.     

Synthesis, conformation, and immunogenicity of monosaccharide-centered multivalent HIV-1 gp41 peptides containing the sequence of DP178

Several monosaccharide-centered multivalent HIV-1 gp41 peptides containing the sequence of DP178 were synthesized. Conformational studies showed that multivalent assembly enhanced the alpha-helical content of the peptide. Therefore, 2-, 3-, or 4-alpha-helix bundles of peptide DP178 could be obtained by assembling the peptide on a suitable bi-, tri-, or tetravalent template. Immunization studies indicated that while peptide DP178 alone was poorly immunogenic, the tetravalent peptide MVP-1 raised high titers of antibodies in mice that recognize not only peptide DP178 but also the native HIV-1 glycoprotein gp41, even in the absence of a carrier protein or adjuvant. The study suggests that carbohydrate-centered multivalent peptides provide not only a model for mimicking protein alpha-helix-bundle structure, but also an effective immunogen for raising high-titer antibodies against HIV-1 envelope glycoprotein gp41.     

Improved Fmoc‐solid‐phase peptide synthesis of an extracellular loop of CFTR for antibody selection by the phage display technology

Cystic fibrosis (CF), a life‐shortening genetic disease, is caused by mutations in the CF transmembrane conductance regulator (CFTR) gene that codes for the CFTR protein, the major chloride channel expressed at the apical membrane of epithelial cells. The development of an imaging probe capable of non‐invasively detect CFTR at the cell surface could be of great advantage for the management of CF. With that purpose, we synthesized the first extracellular loop of CFTR protein (ECL1) through fluorenylmethyloxycarbonyl (Fmoc)‐based microwave‐assisted solid‐phase peptide synthesis (SPPS), according to a reported methodology. However, aspartimide formation, a well‐characterized side reaction in Fmoc‐SPPS, prompted us to adopt a different side‐chain protection strategy for aspartic acid residues present in ECL1 sequence. The peptide was subsequently modified via PEGylation and biotinylation, and cyclized through disulfide bridge formation, mimicking the native loop conformation in CFTR protein. Herein, we report improvements in the synthesis of the first extracellular loop of CFTR, including peptide modifications that can be used to improve antigen presentation in phage display for selection of novel antibodies against plasma membrane CFTR.     

Targeting of specific domains of diphtheria toxin by site-directed antibodies.

Antibodies highly selective for two functionally distinct regions of diphtheria toxin (DTx) were prepared using synthetic peptide conjugates as immunogens. Three peptides were selected for synthesis: sequence DTx141-157 on fragment A, which contains the putative protein elongation factor (EF-2) ADP-ribosyltransferase site; DTx224-237 on fragment B, selected on the basis of forming a predicted surface loop; and DTx513-526 on fragment B, forming a part of the region containing the putative receptor binding domain. All of the anti-peptide antibodies recognized the corresponding peptide, and also reacted with the toxin, specifically with the fragment containing the sequence against which they were raised, confirming the utility of this approach in generating fragment-specific antibodies. The anti-peptide antibody with the highest binding titre both to the peptide and to the native toxin was the one prepared against the sequence with the highest surface and loop likelihood indices of the three peptides selected. The similarity of the reactivity profiles with peptide and native and denatured toxin is consistent with the prediction that the region selected occurs in a surface loop and that the structure of the peptide is similar to the conformation of this region in the native protein. The epitopes for two of the anti-peptide antibodies were mapped. The results indicated that even though the antisera were raised to peptides containing 14 amino acids (aa) they were directed predominantly against a narrow region within the peptide, consisting of only 5-6 aa residues.(ABSTRACT TRUNCATED AT 250 WORDS)     

Hints of nonhierarchical folding of acidic fibroblast growth factor

We have analyzed by circular dichroism (CD) and proton nuclear magnetic resonance (NMR) the helical propensity of the all-beta protein acidic fibroblast growth factor (aFGF) and two peptides corresponding to beta-strand 8 (beta8 peptide, amino acids 95-107) and the beta-strand 8/turn/beta-strand 9 hairpin (beta8/9 peptide, amino acids 95-114), which has been involved in receptor binding. A secondary structure prediction of aFGF carried out by several procedures labels the 95-104 sequence as predominantly alpha-helical. A titration of aFGF with 2,2,2-trifluoroethanol (TFE) induces a change in the far-UV CD spectrum of the protein giving rise to a prominent alpha-helical shape (22% alpha-helix). The cooperativity of the transition and the moderate TFE concentrations used (midpoint at 24%) suggest that the effect of TFE is specific. Moreover, a titration performed at pH 2 yields a higher amount of alpha-helix (55%) at a smaller TFE concentration. Synthetic peptides containing the beta8 and beta8/9 sequences display a random coil conformation at pH 7 but acquire alpha-helical structure in the presence of TFE, methanol, and SDS micelles. At pH below 3.0 a significant amount (20-30%) of alpha-helical conformation is present in both the beta8 and beta8/9 peptides even in the absence of other solvent additives. The secondary structure of the peptides was determined by proton nuclear magnetic resonance (1H NMR). These results suggest that the 95-114 sequence of aFGF has helical propensity and that the protein may fold nonhierarchically in the early steps of folding, acquiring its final beta-structure by a later interaction with the rest of the polypeptide.     

Development of a Mimotope Vaccine Targeting the Staphylococcus aureus Quorum Sensing Pathway

A major hurdle in vaccine development is the difficulty in identifying relevant target epitopes and then presenting them to the immune system in a context that mimics their native conformation. We have engineered novel virus-like-particle (VLP) technology that is able to display complex libraries of random peptide sequences on a surface-exposed loop in the coat protein without disruption of protein folding or VLP assembly. This technology allows us to use the same VLP particle for both affinity selection and immunization, integrating the power of epitope discovery and epitope mimicry of traditional phage display with the high immunogenicity of VLPs. Previously, we showed that using affinity selection with our VLP platform identifies linear epitopes of monoclonal antibodies and subsequent immunization generates the proper antibody response. To test if our technology could identify immunologic mimotopes, we used affinity selection on a monoclonal antibody (AP4-24H11) that recognizes the Staphylococcus aureus autoinducing peptide 4 (AIP4). AIP4 is a secreted eight amino acid, cyclized peptide produced from the S. aureus accessory gene regulator (agrIV) quorum-sensing operon. The agr system coordinates density dependent changes in gene expression, leading to the upregulation of a host of virulence factors, and passive transfer of AP4-24H11 protects against S. aureus agrIV-dependent pathogenicity. In this report, we identified a set of peptides displayed on VLPs that bound with high specificity to AP4-24H11. Importantly, similar to passive transfer with AP4-24H11, immunization with a subset of these VLPs protected against pathogenicity in a mouse model of S. aureus dermonecrosis. These data are proof of principle that by performing affinity selection on neutralizing antibodies, our VLP technology can identify peptide mimics of non-linear epitopes and that these mimotope based VLP vaccines provide protection against pathogens in relevant animal models.     

Dimer structure of magainin 2 bound to phospholipid vesicles

Magainin 2 from African clawed frog Xenopus laevis is an antimicrobial peptide with broad spectra and action mechanisms considered to permeabilize bacterial membranes. CD, vibration, and solid-state NMR spectroscopies indicate the peptide adopts an alpha-helical conformation on binding to phospholipid bilayers, and its micelle-bound conformation, being monomeric and alpha-helical, is well detailed. We showed, however, that the peptide dimerizes on binding to phospholipid bilayers. This difference in the conformation and aggregation state between micelle- and bilayer-bound states prompted us to analyze the conformation of an equipotent analog of magainin 2 (F5Y,F16W magainin 2) bound to phosphatidylcholine vesicles using transferred nuclear Overhauser enhancement (TRNOE) spectroscopy. While observed medium-range TRNOE cross peaks were characteristic of alpha-helix, many long-range cross peaks were not compatible with the peptide's monomeric state. Simulated annealing calculations generated dimer structures indicating (1) two peptide molecules have a largely helical conformation in antiparallel orientation forming a short coiled-coil structure, (2) residues 4-20 are well converged and residues 9-20 are in an alpha-helical conformation, and (3) the interface of the two peptide molecules is formed by well-defined side chains of hydrophobic residues. Finally, determined structures are compatible with numerous investigations examining magainin-phospholipid interactions.     

Nuclear magnetic resonance studies and molecular dynamics simulations of the solution conformation of a 'designed', alpha-helical peptide.

The complete three-dimensional structure in methanol of an amphipathic alpha-helical peptide, that has been designed by taking into account the three-dimensional structures of small haemolytic peptides, secondary structure prediction algorithms and the well documented literature on alpha-helix stabilizing factors, has been elucidated by two-dimensional NMR spectroscopy. Initially various two-dimensional spectra (COSY, TOCSY, and NOESY) allowed the complete sequence specific assignment of all signals in the 1H spectrum. Consequently trial structures were generated which were then subjected to molecular dynamics simulations using 121 NOE-derived distances and 25 vicinal coupling constant values as structural restraints to give a final set of calculated structures. These structures are in complete agreement with the results of a circular dichroism study and reveal that the peptide adopted a highly ordered alpha-helical conformation. Details of the structure which throw light on future peptide/protein design are discussed.     

Use of blocking ELISA additivity test and antibody-antibody competition technique for analysis of recognition ability of monoclonal anti-gonadotropin releasing hormone antibodies

Monoclonal anti-GnRH antibodies reacting to the heptapeptide 4-10 (H-Ser-Tyr-Gly-Leu-Arg-Pro-Gly-OH) were isolated by affinity chromatography using Sepharose 4B-heptapeptide (4-10) column. The ELISA additivity test and antibody-antibody competition techniques were used to study whether the affinity purified MoAb (A-MoAb) fraction recognize the sequence or the conformation of the native hormone. All four A-MoAbs, P862, P778, P764 and P813, were able to recognize the common epitope and did not allow to bind the conventional anti-GnRH antibodies (CoAbs) indicating that the CoAbs were conformation specific. Similarly in antibody-antibody competition technique, all A-MoAbs were able to compete with CoAbs, indicating that MoAbs were generated against the conformation of GnRH involving the entire molecule.     

Identification of peptide sequences that target to the brain using in vivo phage display

Phage display technology could provide a rapid means for the discovery of novel peptides. To find peptide ligands specific for the brain vascular receptors, we performed a modified phage display method. Phages were recovered from mice brain parenchyma after administrated with a random 7-mer peptide library intravenously. A longer circulation time was arranged according to the biodistributive brain/blood ratios of phage particles. Following sequential rounds of isolation, a number of phages were sequenced and a peptide sequence (CTSTSAPYC, denoted as PepC7) was identified. Clone 7-1, which encodes PepC7, exhibited translocation efficiency about 41-fold higher than the random library phage. Immunofluorescence analysis revealed that Clone 7-1 had a significant superiority on transport efficiency into the brain compared with native M13 phage. Clone 7-1 was inhibited from homing to the brain in a dose-dependent fashion when cyclic peptides of the same sequence were present in a competition assay. Interestingly, the linear peptide (ATSTSAPYA, Pep7) and a scrambled control peptide PepSC7 (CSPATSYTC) did not compete with the phage at the same tested concentration (0.2-200?pg). Labeled by Cy5.5, PepC7 exhibited significant brain-targeting capability in in vivo optical imaging analysis. The cyclic conformation of PepC7 formed by disulfide bond, and the correct structure itself play a critical role in maintaining the selectivity and affinity for the brain. In conclusion, PepC7 is a promising brain-target motif never been reported before and it could be applied to targeted drug delivery into the brain.     

Delineation and conformational analysis of two synthetic peptide models of antigenic sites on rodent cytochrome c

Two regions of rodent cytochrome c, one within the first four residues of the molecule, which is N-acetylated, and one at a beta bend around residue 44, are known to be immunogenic and antigenic in rabbits. Using sequential peptide synthesis, we have determined the residues required for linear synthetic peptides within these sequences to bind to antibody raised in rabbits to intact rat cytochrome c. The residues that were important in binding the N-terminal peptides were N-acetylglycine at position 1 and valine at position 3. The smallest peptide sequence around residue 44 that would bind to antibodies was Gln-Ala-Ala-Gly-Phe. A theoretical conformational analysis of these peptides showed that the amino-terminal tetrapeptide adopts a wide statistical ensemble of conformational states and that the addition of residues beyond 41 and 45 in the other sequence does not appear to stabilize longer peptides in the native beta-bend conformation. Thus, the antigenicity conferred by Phe-46 and Gln-42 in this peptide is most likely due to the direct interaction of the side chains of these residues with the antibody binding site. The demonstration here that native conformation is not essential for antigenic peptides to bind to antibodies raised against the whole protein indicates that the association energy between antigen and antibody can be sufficient to induce conformation in conformationally flexible peptides. This supports the concept that anti-protein and anti-peptide antibodies may invoke conformational changes in cross-reactive protein antigens and may explain why longer peptides, which may adopt stable nonnative secondary structure, often do not bind to antibodies raised to the whole molecule.     

Design of a minimal protein oligomerization domain by a structural approach

Because of the simplicity and regularity of the alpha-helical coiled coil relative to other structural motifs, it can be conveniently used to clarify the molecular interactions responsible for protein folding and stability. Here we describe the de novo design and characterization of a two heptad-repeat peptide stabilized by a complex network of inter- and intrahelical salt bridges. Circular dichroism spectroscopy and analytical ultracentrifugation show that this peptide is highly alpha-helical and 100% dimeric tinder physiological buffer conditions. Interestingly, the peptide was shown to switch its oligomerization state from a dimer to a trimer upon increasing ionic strength. The correctness of the rational design principles used here is supported by details of the atomic structure of the peptide deduced from X-ray crystallography. The structure of the peptide shows that it is not a molten globule but assumes a unique, native-like conformation. This de novo peptide thus represents an attractive model system for the design of a molecular recognition system.