Ti2448合金种植体表面不同纳米管径生物活性膜对成骨细胞早期黏附的影响

观察Ti2448合金表面不同纳米管径生物活性膜对成骨细胞早期黏附的影响,筛选出能够抵抗细菌在种植体表面黏附和定植的最适管径,为研制开发具有抗菌性能的种植体提供实验基础。采用阳极氧化法,设定不同氧化电压,在Ti2448合金表面生成具有不同纳米管径的生物活性膜。通过MTT实验检测不同管径纳米管表面在不同时间点黏附的MG-63细胞数量差异;通过免疫荧光法观察接种24h后不同管径纳米管表面黏附细胞形态学差异。结果显示,细胞接种3h和24h后,30nm组的OD值显著高于对照组及其他实验组(P0.05);随着纳米管径的增加,细胞骨架蛋白的铺展范围逐渐减小,细胞由多角形渐变为梭形、椭圆形、圆形。研究结果表明,30nm管径生物活性膜更有利于成骨细胞的早期黏附,可能更能抵抗细菌在钛种植体上的黏附与定植。     

α半水硫酸钙复合功能化多壁碳纳米管骨修复材料生物相容性

旨在评价α半水硫酸钙复合功能化多壁碳纳米管骨修复材料的生物相容性,为后期临床实验奠定基础。分别采用兔L929成纤维细胞与材料浸提液以及材料片剂与兔骨髓基质干细胞复合培养,在不同时段运用倒置显微镜观察,MTT检测,扫描电子显微镜分析等手段,观察材料对细胞的相容性;进行急性、亚急性毒性实验,肌肉植入实验,骨植入实验等,观察材料对组织的相容性。结果表明,L929成纤维细胞在材料浸提液中生长良好,MTT检测与对照组无显著差异(P>0.05);扫描电子显微镜结果显示,细胞能在材料上黏附并增殖;体内实验表明材料对机体无毒,无致敏性,组织相容性佳。α半水硫酸钙/碳纳米管复合材料表现出的良好生物相容性,有望在骨组织工程中得到广泛运用。     

人SDCT2蛋白亚细胞定位信号分析

为了确定人高亲和力钠离子依赖性二羧酸共转运蛋白（high-affinity sodium-dependent dicarboxylate co-transporter, SDCT2,NaDC3）在细胞内的定位,构建了SDCT2与增强型绿色荧光蛋白（EGFP）的融合蛋白表达载体,并转染肾小管上皮细胞LLC-PK1,激光共聚焦显微镜观察显示,SDCT2蛋白主要定位于细胞的基底侧膜上.同时将SDCT2-EGFP融合基因mRNA显微注射到爪蟾卵母细胞中表达,可见融合蛋白的绿色荧光仅分布在细胞膜上.为了进一步确定该蛋白质的亚细胞定位信号序列,将SDCT2基因的N端及C端分别缺失,并构建缺失突变体与EGFP的融合蛋白表达载体,将它们转染到LLC-PK1中,观察SDCT2 缺失体在细胞内的分布情况.结果显示,N端缺失的SDCT2蛋白主要位于细胞质中,顶膜和基底侧膜上也有表达;C端缺失的SDCT2蛋白主要位于基底侧膜上,顶膜几乎没有表达,细胞质中表达很少.免疫组化结果也显示,SDCT2只表达于人近端肾小管上皮细胞的基底侧膜.这表明SDCT2蛋白的N端序列对其亚细胞定位是必需的,人SDCT2蛋白的基底膜定位信号位于N端序列中.     

TGF-βⅡ型受体mRNA及蛋白在人IgA肾病肾小管上皮的表达

为探讨转化生长因子-β（TGF-β）在人IgA肾病肾小管间质纤维化中的应用。本用原位杂交及免疫组织化学方法研究转化生长因子-βⅡ型受体（TGF-βRⅡ）mRNA和蛋白在肾小管上皮细胞的表达。结果表明：TGF-βRⅡmRNA定位于肾小管及集合管上皮细胞,TGF-βRⅡ蛋白定位于肾小管及集合管上皮细胞的基底面,腔面及侧面,或呈与基底膜相垂直的基底部纵纹出现于一些细胞的胞质内,肾小球系膜细胞也可见TGF-βRⅡmRNA及蛋白表达,但不如肾小管明显,以上结果提示肾小管和集合管上皮细胞的受体可与TGF-β特异性结合。TGF-β则通过自分泌作用促进小管上皮细胞合成与分泌ECM。过多的ECM在小管周围沉积;或TGF-β抑制ECM的降解,终将导致IgA肾病的肾小管间质纤维化。     

聚己内酯静电纺丝纳米纤维支架用于小鼠诱导多能干细胞培养

干细胞联合生物支架材料体外构建功能性组织与器官,成为当前组织再生研究的重要策略,而探求具有良好生物相容性的支架材料是其关键.本研究采用扫描电镜、噻唑蓝（MTT）法、荧光显微染色等方法检测小鼠诱导多能干细胞（murine induced pluripotent stem cells, miPSCs）在聚己内酯（poly ε-caprolactone, PCL）静电纺丝纳米纤维支架上的粘附、增殖等生物学特性,探究聚己内酯纳米纤维支架与miPSCs的生物相容性. 结果显示,miPSC在PCL纳米纤维支架上具有良好粘附性并呈集落样生长,其增殖能力及干性标记物（Oct4-GFP+）的表达均不亚于标准对照组;扫描电镜显示,miPSC在PCL纳米纤维支架材料上呈现出绒毛状突起的表面结构.上述结果表明,PCL纳米纤维支架可促进miPSCs的粘附、自我增殖以及干性维持,两者具有良好的生物相容性,为下一步联合生物支架材料与干细胞构建功能性组织奠定了基础.     

纳米结构Ti/TiN涂层对NiTi合金生物相容性的影响

目的：评价纳米结构Ti/TiN涂层对镍钛形状记忆合金（含镍50.6at%）生物相容性的影响,为生物医用纳米结构Ti/TiN涂层表面改性的NiTi合金材料生物安全性提供依据。方法：不影响基体的形状记忆性或超弹性效应的前提下,采用真空过滤电弧离子镀技术,在NiTi合金表面沉积一层纳米结构Ti/TiN涂层,分别对表面改性前和改性后的NiTi合金样品进行体外细胞毒性实验、溶血实验和血小板粘附实验,探索纳米结构Ti/TiN涂层对NiTi合金生物相容性的影响。结果：表面具有纳米结构Ti/TiN涂层的NiTi合金无细胞毒性,H9C2（2-1）细胞相容性优于涂层前,细胞形态典型,粘附数量明显大于涂层前。纳米结构Ti/TiN涂层有改善NiTi合金的血液相容性作用,其溶血率从2.1%降至涂层改性后的1.2%,同时,血小板黏附量和聚集程度小于处理前的NiTi合金。结论：纳米Ti/TiN涂层能够显著改善NiTi合金的生物相容性。     

改构型酸性成纤维细胞生长因子对细胞增殖活性的影响

目的:研究aFGF和MaFGF对正常的肾小管上皮细胞及胃癌细胞增殖的影响。方法:用不同浓度的aFGF和MaFGF分别作用于肾小管上皮细胞及胃癌细胞,48h后采用WST-8法测定aFGF和MaFGF对两种细胞的促增殖活性。结果:在各浓度下,MaFGF组对肾小管上皮细胞和胃癌细胞的促增殖作用都显著低于aFGF组。结论:MaFGF对肾小管上皮细胞及胃癌细胞的促分裂活性较aFGF明显下降。     

复合红景天苷支架材料对大鼠骨髓间充质干细胞的影响

探讨复合红景天苷微球的胶原蛋白材料支架对大鼠骨髓间充质干细胞的影响及作用。将红景天苷制作成微球复合到胶原蛋白中,扫描电镜观察材料支架的表征,接种大鼠骨髓间充质干细胞后扫描电镜观察细胞与材料的黏附性,CCK-8法测细胞在材料上的增殖情况,HE染色检测细胞在材料上的增殖及形态,S100免疫荧光化学法检测干细胞向神经细胞的分化情况。结果显示,细胞接种到材料上,在材料上黏附并生长。同种材料,随着时间的延长,材料上的细胞显著增殖(P0.05)。神经细胞标志性蛋白S100表达为阳性。复合红景天苷微球的胶原蛋白具有良好的生物相容性,红景天苷微球不影响细胞在材料上的增殖,且可有效诱导大鼠间充质干细胞向神经细胞分化。     

自组装IKVAV多肽纳米纤维支架凝胶及其对嗅鞘细胞的作用

旨在观察自组装IKVAV多肽纳米纤维支架凝胶对鼠嗅鞘细胞(OECs)的作用。通过调整IKVAV溶液pH值并加入培养液触发多肽自组装为支架凝胶, 用原子力显微镜检测IKVAV分子可以自组装成编织状纳米纤维(直径为3~5 nm)。采用原代分离培养方法获得OECs单细胞悬液后, 使用差速贴壁法两次纯化OECs且在第12天通过免疫染色计数OECs纯度为85%。将IKVAV多肽纳米纤维支架凝胶与OECs复合培养, 倒置显微镜下观察OECs生长良好, Calcein-AM/PI活、死细胞染色表明活细胞数达95%。CCK-8法间接细胞计数证实IKVAV多肽可促进OECs的黏附, 对OECs增殖没有影响。由此可见IKVAV多肽可以自组装成纳米纤维支架凝胶且对OECs有良好的生物相容性及黏附作用, 可作为神经组织工程支架材料。     

紫外光照射对兰花原球茎增殖、分化和超微结构的影响

本文研究结果表明：紫外光照射１小时有利于兰花原球茎的增殖,照射０．５小时有利于原球茎的分化。较高剂量的紫外光照射可导致细胞核的变形、皱缩、线粒体液泡化。在一定照射剂量条件下,紫外光照射可提高细胞无丝分裂颜率。     

A novel hydrogen peroxide biosensor based on the immobilization of horseradish peroxidase onto Au-modified titanium dioxide nanotube arrays

In this study, we report on a promising H(2)O(2) biosensor based on the co-immobilization of horseradish peroxidase (HRP) and chitosan onto Au-modified TiO(2) nanotube arrays. The titania nanotube arrays were directly grown on a Ti substrate using anodic oxidation first; a gold thin film was then uniformly coated onto the TiO(2) nanotube arrays by an argon plasma technique. The morphology and composition of the fabricated Au-modified TiO(2) nanotube arrays were characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Cyclic voltammetry and chronoamperometry were used to study and to optimize the performance of the resulting electrochemical biosensor. The effect of pH, applied electrode potential, the presence of the electron-mediator methylene blue, and the anodic oxidation time of the Ti substrate on the electrochemical biosensor has been systemically studied. Our electrochemical measurements show that the Au-modified TiO(2) nanotube arrays provide excellent matrices for the immobilization of HRP and that the optimized electrochemical biosensor exhibits long linearity, a low detection limit, high stability and very good reproducibility for the detection of H(2)O(2). Under the optimized conditions the linearity of the developed biosensor for the detection of H(2)O(2) is observed from 5 x 10(-6) to 4 x 10(-4) moll(-1) with a detection limit of 2 x 10(-6) moll(-1) (based on the S/N=3).     

Direct electrochemistry of horseradish peroxidase on TiO(2) nanotube arrays via seeded-growth synthesis

Horseradish peroxidase (HRP) was successfully immobilized on vertically oriented TiO(2) nanotube arrays (NTAs), which was prepared by a seeded-growth mechanism. The nanotubular structure of TiO(2) was characterized by scanning electron microscope (SEM). After encapsulated HRP on TiO(2) nanotube arrays, the direct electron transfer of HRP was observed. Owing to the redox reaction of electroactive center of HRP, the HRP/TiO(2) NTAs modified electrode exhibited a pair of quasi-reversible peaks with the peak-to-peak separation of 70mV and the formal potential of -0.122V (vs. SCE) in 0.2molL(-1) phosphate buffer solution (PBS, pH 7.0). The number of transference electron was 0.84 and the direct electron transfer (ET) constant (k(s)) was 3.82s(-1). The HRP/TiO(2) NTAs modified electrode displayed an excellent electrocatalytic performance for H(2)O(2) and the formal Michaelis-Menten constant (K(m)(app)) was 1.9mmolL(-1). The response currents had a good linear relation with the concentration of H(2)O(2) from 5.0x10(-7)molL(-1) to 1.0x10(-5)molL(-1) and 5.0x10(-5)molL(-1) to 1.0x10(-3)molL(-1), respectively.     

TiO2 nanotubes for bone regeneration

Nanostructured materials are believed to play a fundamental role in orthopedic research because bone itself has a structural hierarchy at the first level in the nanometer regime. Here, we report on titanium oxide (TiO(2)) surface nanostructures utilized for orthopedic implant considerations. Specifically, the effects of TiO(2) nanotube surfaces for bone regeneration will be discussed. This unique 3D tube shaped nanostructure created by electrochemical anodization has profound effects on osteogenic cells and is stimulating new avenues for orthopedic material surface designs. There is a growing body of data elucidating the benefits of using TiO(2) nanotubes for enhanced orthopedic implant surfaces. The current trends discussed within foreshadow the great potential of TiO(2) nanotubes for clinical use.     

Highly selective capture of phosphopeptides using a nano titanium dioxide-multiwalled carbon nanotube nanocomposite

In this study, a titanium dioxide-multiwalled carbon nanotube (TiO2-MWNT) nanocomposite was first used to enrich phosphopeptides as a binding agent. The TiO2-MWNT nanocomposite was synthesized by the hydrothermal reaction process and characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR), and X-ray powder diffraction (XRD). The results demonstrated that the anatase phase TiO2 nanoparticles had been successfully linked by MWNTs. The TiO2-MWNT nanocomposite was applied as a sorbent to enrich phosphopeptides, and the results showed that the performance of the TiO2-MWNT nanocomposite was better than 5 μm TiO2, as confirmed by the analysis of phosphopeptides from a tryptic digest of a standard protein (β-casein and bovine serum albumin) using high-performance liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS). The use of lactic acid in the loading buffer significantly enhances the selectivity of the TiO2-MWNT nanocomposite. This nanocomposite material was further applied to enrich the phosphopeptides in a protein digest obtained from nonfat milk successfully.     

Structure of paracrystalline arrays on outer membranes of rat-liver and rat-heart mitochondria.

Crystalline arrays are induced in outer membranes of rat-liver and rat-heart mitochondria by phosphotungstate and silicotungstate. The basic structure of the arrays has been determined by correlation averaging of electron microscopic images of side views of tubular arrays and en face views of planar arrays. The arrays consist of rows of bilobed projecting subunits and are similar (in lattice parameters and projected subunit dimensions) to periodic arrays of ion transport ATPases, e.g., arrays of Ca(2+)-ATPase induced by vanadate in sarcoplasmic reticulum. Hexokinase-labeled colloidal gold particles do not specifically decorate the arrays, suggesting that the hexokinase receptor (VDAC channel) is not a component of the arrays.     

Hydrogen adsorption capacities of multi-walled boron nitride nanotubes and nanotube arrays: a grand canonical Monte Carlo study

Hydrogen adsorption in multi-walled boron nitride nanotubes and their arrays was studied using grand canonical Monte Carlo simulation. The results show that hydrogen storage increases with tube diameter and the distance between the tubes in multi-walled boron nitride nanotube arrays. Also, triple-walled boron nitride nanotubes present the lowest level of hydrogen physisorption, double-walled boron nitride nanotubes adsorb hydrogen better when the diameter of the inner tube diameter is sufficiently large, and single-walled boron nitride nanotubes adsorb hydrogen well when the tube diameter is small enough. Boron nitride nanotube arrays adsorb hydrogen, but the percentage of adsorbed hydrogen (by weight) in boron nitride nanotube arrays is rather similar to that found in multi-walled boron nitride nanotubes. Also, when the Langmuir and Langmuir-Freundlich equations were fitted to the simulated data, it was found that multi-layer adsorptivity occurs more prominently as the number of walls and the tube diameter increase. However, in single-walled boron nitride nanotubes with a small diameter, the dominant mechanism is monolayer adsorptivity.     

Hypoxic stress-enhanced expression and release of adrenomedullin (AM) and up-regulated AM receptors, while glucose starvation reduced AM expression and release and down-regulated AM receptors in monkey renal cells

The proliferative peptide adrenomedullin (AM) has a wide distribution in a variety of tissues and cells. The mechanism how the AM gene is regulated in cells is not yet known. The renal cortex, renal vascular smooth muscles, glomeruli and tubular epithelial cells are very sensitive to hypoxia. Renal hypoxia produces acute renal tubular necrosis and markedly induces AM expression in damaged cells. However, little information is available regarding the possible pathophysiological production and release of renal tubular AM. Regulation of membrane-bound AM receptors in renal cells has not yet been systematically studied. To elucidate the potential pathological role of human AM we examined the production and release of AM, as well as the characteristics of surface membrane AM receptors in cultured monkey renal tubular epithelial cells (RC) exposed to hypoxia, induced with endothelin-1, and subjected to glucose deprivation. Exposure of RC to hypoxia (1 % O(2), 5 % CO(2) in N(2)), and to phorbol 12-myristate 13-acetate (PMA) increased production and secretion of AM and increased specific [(125)I]AM binding on RC. Metabolic stress (1 % glucose in the cultivation medium) and preincubation of RC with rival peptide endothelin-1 significantly reduced immunoreactive-AM in a conditioned medium and whole cell surface membrane AM binding on RC. Altogether, our data suggest that the AM is involved in the adaptation of renal tubular cells to hypoxia. Increased expression of AM mRNA and regulation of AM receptors in metabolic stress may function as an important autocrine/paracrine regulator(s) of renal tubular epithelial cells.     

氧化钛纳米管对即刻种植骨结合影响的实验研究

目的:评价氧化钛纳米管对犬即刻种植骨结合效果的影响。方法:犬拔牙后即刻将光滑表面(对照组)和氧化钛纳米管表面(实验组)种植体植入拔牙窝内,于12周后处死取材,进行显微CT扫描、组织学染色分析以及生物力学检测。结果:扫描电镜显示经过阳极氧化后,钛表面形成了直径为30-80纳米的纳米管状结构;12周后,显微CT扫描结果提示实验组骨体积分数(BV/TV)、骨小梁数目(Tb.N)、骨小梁厚度(Tb.Th)均显著高于对照组,骨小梁间隙(Tb.Sp)显著低于对照组,差异具有统计学意义(P0.05)。术后12周,实验组与对照组骨结合率分别为49.35±11.76%、31.79±13.07%,最大拔出力分别为105.28±27.87N、79.23±20.46N,实验组均显著高于对照组,差异均具有统计学意义(P0.05)。结论:氧化钛纳米管表面有利于促进即刻种植后骨结合的效果。     

Molecular dynamics investigation of an oriented cyclic peptide nanotube in DMPC bilayers

Nanotubes resulting from the self-assembly of cyclic peptides formed by eight alpha-amino acids and inserted into lipid bilayers have been shown to function as synthetic, integral transmembrane channels. A nanotube consisting of eight cyclo[(L-Trp-D-Leu)(3)-L-Gln-D-Leu] subunits, organized in an antiparallel, beta-sheetlike channel embedded in a hydrated dimyristoylphosphatidylcholine bilayer was investigated in an 8-ns molecular dynamics trajectory. This large-scale statistical simulation brings to light not only the atomic-level structural features of the synthetic channel, but also its dynamical properties. Overall, the nanotube conserves its hollow tubular structure. The calculation reproduces the tilt of the channel with respect to the normal of the bilayer, in reasonable agreement with experiment. The results show a dislocation of the nanotube indicative of a possible disassembly process that may influence the channel conduction. The dynamics of the water in the hollow tubular structure has been characterized, and the conductance of the channel has been estimated. Transport properties of the peptide nanotube are discussed in comparison with other transporters.     

Role of fibroblast growth factor-binding protein in the pathogenesis of HIV-associated hemolytic uremic syndrome

A characteristic finding of childhood HIV-associated hemolytic uremic syndrome (HIV-HUS) is the presence of endothelial injury and microcystic tubular dilation, leading to a rapid progression of the renal disease. We have previously shown that a secreted fibroblast growth factor-binding protein (FGF-BP) is upregulated in kidneys from children affected with HIV-HUS and HIV nephropathy. Here, we sought to determine the potential role of FGF-BP in the pathogenesis of HIV-HUS. By immunohistochemical and in situ hybridization studies, we observed FGF-BP protein and mRNA upregulation in regenerating renal tubular epithelial cells from kidneys of HIV-Tg26 mice with late-stage renal disease, that is, associated with the development of microcystic tubular dilatation and accumulation of FGF-2. Moreover, FGF-BP increased the FGF-2-dependent growth and survival of cultured primary human renal glomerular endothelial cells and enhanced FGF-2-induced MAPK/ERK2 activation, as well as the proliferation of immortalized GM7373 endothelial cells. We propose that HIV-Tg26 mice are a clinically relevant model system to study the role of FGF-BP in the pathogenesis of HIV-associated renal diseases. Furthermore, the upregulation of FGF-BP by regenerating renal tubular epithelial cells may provide a mechanism by which the regenerative and angiogenic activity of FGF-2 in renal capillaries can be modulated in children with HIV-HUS and other renal disease.