Electrochemical impedance detection of DNA hybridization based on dendrimer modified electrode

Bioactive ultrathin films with the incorporation of amino-terminated G4 PAMAM dendrimers have been prepared via layer-by-layer self-assembly methods on a gold electrode and used for the DNA hybridization analysis. Surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS) are used to characterize the successful construction of the multicomponent film on the gold substrate. The dendrimer-modified surfaces improve the immobilization capacity of the probe DNA greatly, compared to the AET (2-aminoethanethiol) SAM sensor surfaces without dendrimer molecules. DNA hybridization analysis is monitored by EIS. The dendrimer-based electrochemical impedance DNA biosensor shows high sensitivity and selectivity for DNA hybridization assay. The multicomponent films also display a high stability during repeated regeneration and hybridization cycles.     

Electrochemical detection of DNA hybridization using a change in flexibility

A novel electrochemical method of detecting DNA hybridization is presented based on the change in flexibility between the single and double stranded DNA. A recognition surface based on gold nanoparticles (GNPs) is firstly modified via mixing self-assembled monolayer of thiolated probe DNA and 1,6-hexanedithiol. The hybridization and electrochemical detection are performed on the surface of probe-modified GNPs and electrode, respectively. Here in our method the charge transfer resistance (R(ct)) signal is enhanced by blocking the surface of electrode with DNA covered GNPs. The GNPs will be able to adsorb on the gold electrode when covered with flexible single stranded DNA (ssDNA). On the contrary, it will be repelled from the electrode, when covered with stiff double stranded DNA (dsDNA). Therefore, different R(ct) signals are observed before and after hybridization. The hybridization events are monitored by electrochemical impedance spectroscopy (EIS) measurement based on the R(ct) signals without any external labels. This method provides an alternative route for expanding the range of detection methods available for DNA hybridization.     

Sex determination based on amelogenin DNA by modified electrode with gold nanoparticle

We have developed a simple and renewable electrochemical biosensor based on carbon paste electrode (CPE) for the detection of DNA synthesis and hybridization. CPE was modified with gold nanoparticles (AuNPs), which are helpful for immobilization of thiolated bioreceptors. AuNPs were characterized by scanning electron microscopy (SEM). Self-assembled monolayers (SAMs) of thiolated single-stranded DNA (SH–ssDNA) of the amelogenin gene was formed on CPE. The immobilization of the probe and its hybridization with the target DNA was optimized using different experimental conditions. The modified electrode was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electrochemical response of ssDNA hybridization and DNA synthesis was measured using differential pulse voltammetry (DPV) with methylene blue (MB) as an electroactive indicator. The new biosensor can distinguish between complementary and non-complementary strands of amelogenin ssDNA. Genomic DNA was extracted from blood and was detected based on changes in the MB reduction signal. These results demonstrated that the new biosensor could be used for sex determination. The proposed biosensor in this study could be used for detection and discrimination of polymerase chain reaction (PCR) products of amelogenin DNA.     

Impedimetric detection of single-stranded PCR products derived from methicillin resistant Staphylococcus aureus (MRSA) isolates

Using electrochemical impedance spectroscopy (EIS) the sensitive and specific detection of the antibiotic resistance gene mecA has been demonstrated. The gene sequence was obtained from clinical Staphylococcus aureus isolates. Initially a mecA specific probe was selected from hybridisation tests with a 3' and 5' version of a previously published probe sequence. When immobilised on a gold electrode in PNA form it was possible to detect hybridisation of mecA PCR product electrochemically at concentrations as low as 10nM. By incorporating an undecane-thiol and 1.8 nm glycol spacer into the PNA probe it was possible to extend the limit of detection for mecA to 10 pM. Most published studies on EIS and nucleic acid detection report the use of short artificial DNA sequences or novel signal amplification schemes which improve sensitivity whereas this study reports the successful detection of long DNA fragments produced by PCR following extraction from clinical isolates. Finally, using screen printed electrodes the paper demonstrates hybridisation monitoring of mecA in an "on-line" assay format under ambient conditions which paves the way for rapid mecA detection in point of care scenarios.     

Analysis of DNA extracted from formalin-fixed, paraffin-embedded tissues by enzymatic amplification and hybridization with sequence-specific oligonucleotides

The "polymerase chain reaction" (PCR) procedure for amplifying specific gene sequences has recently been combined with sequence-specific oligonucleotide (SSO) probe hybridization to develop a highly sensitive, rapid, and simple method for analyzing allelic variations in genomic DNA. In the present study we have used PCR/SSO to analyze partially purified DNA extracted from formalin-fixed, paraffin-embedded tissue specimens. We report that this DNA, including samples that were partially degraded, proved to be suitable for analysis by the PCR/SSO procedure.     

Analysis of polymerase chain reaction products by high-performance liquid chromatography with fluorimetric detection and its application to DNA diagnosis

We describe the development of a sensitive high-performance liquid chromatographic (HPLC) method for polymerase chain reaction (PCR) products using bisbenzimide (Hoechst 33258 dye) based fluorimetric detection. The detection limit and specificity for double-strand DNA detection are improved in comparison with HPLC with UV absorbance detection. This HPLC, using a column packed with diethylaminoethyl-bonded non-porous resin particles, was applied to the detection of allele-specific PCR and restriction fragment length polymorphism analysis. We also developed a hybridization method analyzed by HPLC. DNA fragments (149 bp) containing the mutation site (C→A,G,T) in the N-ras gene were amplified by PCR. Fluorescein isothiocyanate (FITC)-labeled DNA probes were also prepared by PCR using FITC-labeled 5′ primer. Analysis of mutation was performed by the separation of a hybrid and non-reactive DNA probe with HPLC with fluorimetric detection after the hybridization of target DNA (149 bp) and a FITC DNA probe. The effects of various factors on hybridization were examined to establish optimal assay conditions. Under the conditions determined, a point mutation in PCR products obtained from the N-ras gene could be detected specifically by this method. The analysis of PCR products by HPLC may potentially be useful for DNA diagnosis.     

Rapid detection and species identification of Mycobacterium spp. using real-time PCR and DNA-microarray

Infections with mycobacteria are an important issue in public health care. Here we present a "proof-of-principle" concept for the identification of 37 different Mycobacterium species using 5' exonuclease real-time PCR and DNA microarray based on the region upstream of the 65 kDa heat shock protein. With our two PCR probes, one complementary to all mycobacteria species, the other specific for the M. tbc-complex, 34 species were properly classified by real-time PCR. After reamplification and hybridization to a DNA microarray, all species showed a specific pattern. All 10 blindly tested positive cultures revealed a positive real-time PCR signal with the genus probe. After reamplification and hybridization, six samples could unambiguously be identified. One sample showed a mixture of presumably three species-specific patterns and sequencing the 16S rRNA confirmed the presence of a mixture. The hybridization results of three specimens could not be interpreted because the signal to background ratio was not sufficient. Two samples considered as negative controls (LAL Reagent Water (Cambrex) and DNA of Candida albicans) gave neither a genus nor a M. tbc-complex positive PCR signal. Based on these results we consider our method to be a promising tool for the rapid identification of different mycobacteria species, with the advantage of possible identification of mixed infections or contaminations.     

Reduction of the number of mutant copies of mitochondrial DNA in tissues of irradiated mice in the postradiation period

Changes in the number of mutant copies of mitochondrial DNA (mtDNA) were studied in the brain and spleen tissues of mice after their X-irradiation at a dose of 5 Gy. For this purpose, heteroduplexes obtained via hybridization of the products of PCR amplification of mtDNA (ND3 gene and two D-loop regions) from irradiated and control mice were digested with the CelI nuclease capable of specific mismatch cleavage. Heteroduplexes obtained via hybridization of the products of PCR amplification of mtDNA from irrradiated and control mice were digested by the CelI nuclease to a greater degree than heteroduplexes of the PCR products of mtDNA of mice from the control group. This suggests the presence of mutations in mtDNA regions in irradiated mice. Digestion by the CelI nuclease of heteroduplexes obtained via hybridization of the PCR products of mtDNA (ND3 gene and D-loop regions) on day 8 after irradiation is essentially more efficient than digestion of heteroduplexes obtained via hybridization of the PCR products of mtDNA isolated from mouse tissues on days 14 and 28 of the postradiation period. These results indicate a reduction in the number of mtDNA copies with mutations in tissues of irradiated mice by day 28 of the postradiation period. The reduction in the level of mutant mtDNA copies by this term is especially significant in the spleen. The total number of mtDNA copies in the mouse brain and spleen tissues estimated by real-time PCR, relative to the nuclear β-actin gene, is also decreased by 30–50% as compared to the control on days 8 to 28 after irradiation. The results of the study suggest that mutant mtDNA copies are eliminated from tissues of irradiated animals in the postradiation period. This elimination can be regarded either as a result of selective degradation of mitochondria carrying mutant DNA copies or as a result of cell death being continued in tissues of irradiated animals.     

PCR amplification and analysis of yeast artificial chromosomes

A strategy for the analysis of yeast artificial chromosome (YAC) clones that relies on polymerase chain reaction (PCR) amplification of small restriction fragments from isolated YACs following adapter ligation was developed. Using this method, termed YACadapt, we have amplified several YACs from a human Xq24-qter library and have used the PCR products for physical mapping by somatic cell hybrid deletion analysis and fluorescent in situ hybridization. One YAC, RS46, was mapped to band Xq27.3, near the fragile X mutation. The PCR product is an excellent renewable source of YAC DNA for analyses involving hybridization of YAC inserts to a variety of DNA/RNA sources.     

PCR amplification of chromosome-specific DNA isolated from flow cytometry-sorted chromosomes.

We have established a method for amplifying and obtaining large quantities of chromosome-specific DNA by linker/adaptor ligation and polymerase chain reaction (PCR). Small quantities of DNA isolated from flow cytometry-sorted chromosomes 17 and 21 were digested with MboI, ligated to a linker/adaptor, and then subjected to 35 cycles of PCR. Using this procedure, 20 micrograms of chromosome-specific DNA can be obtained. Southern blot analysis using several DNA probes previously localized to chromosomes 17 and 21 indicated that these gene sequences were present in the amplified chromosome-specific DNA. A small quantity of the chromosome-specific DNA obtained from the first round of PCR amplification was used to amplify DNA for a second, third, and fourth round of PCR (30 cycles), and specific DNA sequences were still detectable. Fluorescence in situ hybridization using these chromosome-specific DNA probes clearly indicated the hybridization signals to the designated chromosomes. We showed that PCR-amplified chromosome 17-specific DNA can be used to detect nonrandom chromosomal translocation of t(15;17) in acute promyelocytic leukemia by fluorescence in situ hybridization.     

Real-time monitoring of PCR amplification of proto-oncogene c-MYC using a Ta₂O₅ electrolyte-insulator-semiconductor sensor

We present a new approach for real-time monitoring of PCR amplification of a specific sequence from the human c-MYC proto-oncogene using a Ta(2)O(5) electrolyte-insulator-semiconductor (EIS) sensor. The response of the fabricated EIS sensor to cycle DNA amplification was evaluated and compared to standard SYBR-green fluorescence incorporation, showing it was possible to detect DNA concentration variations with 30 mV/μM sensitivity. The sensor's response was then optimized to follow in real-time the PCR amplification of c-MYC sequence from a genomic DNA sample attaining an amplification profile comparable to that of a standard real-time PCR. Owing to the small size, ease of fabrication and low-cost, the developed Ta(2)O(5) sensor may be incorporated onto a microfluidic device and then used for real-time PCR. Our approach may circumvent the practical and economical obstacles posed by current platforms that require an external fluorescence detector difficult to miniaturize and incorporate into a lab-on-chip system.     

Solid-phase time-resolved fluorescence detection of human immunodeficiency virus polymerase chain reaction amplification products.

A new assay system for the detection of polymerase chain reaction (PCR) amplification products is presented. This single-pot sandwich assay system employs solid-support oligonucleotide-coated capture beads, a rare earth metal chelate-labeled probe, and a time-resolved fluorescence detection. The new assay system was evaluated for various reaction conditions including, DNA denaturation time, hybridization salt concentration, probe concentration, and hybridization time, all of which are important in designing an assay with a high level of sensitivity for the detection of duplex DNA. This nonisotopic assay system was applied to the detection of purified human immunodeficiency virus (HIV) DNA and sensitivity was compared with agarose gel electrophoresis and slot blot hybridization using a 32P-labeled probe. We were able to detect the amplified product from one copy of HIV DNA after 35 cycles of PCR amplification in less than 30 min using this assay, which compared with one copy by gel electrophoresis after 40 cycles of PCR amplification and one copy by slot blot hybridization after 35 cycles of PCR amplification and an overnight exposure of the autoradiogram. Thus, this assay is rapid, sensitive, and easy to use.     

Dramatic increase in the signal and sensitivity of detection <Emphasis Type="Italic">via</Emphasis> self-assembly of branched DNA

In molecular testing using PCR, the target DNA is amplified via PCR and the sequence of interest is investigated via hybridization with short oligonucleotide capture probes that are either in a solution or immobilized on solid supports such as beads or glass slides. In this report, we report the discovery of assembly of DNA complex(es) between a capture probe and multiple strands of the PCR product. The DNA complex most likely has branched structure. The assembly of branched DNA was facilitated by the product of asymmetric PCR. The amount of branched DNA assembled was increased five fold when the asymmetric PCR product was denatured and hybridized with a capture probe all in the same PCR reaction mixture. The major branched DNA species appeared to contain three reverse strands (the strand complementary to the capture probe) and two forward strands. The DNA was sensitive to S1 nuclease suggesting that it had single-stranded gaps. Branched DNA also appeared to be assembled with the capture probes immobilized on the surface of solid support when the product of asymmetric PCR was hybridized. Assembly of the branched DNA was also increased when hybridization was performed in complete PCR reaction mixture suggesting the requirement of DNA synthesis. Integration of asymmetric PCR, heat denaturation and hybridization in the same PCR reaction mixture with the capture probes immobilized on the surface of solid support achieved dramatic increase in the signal and sensitivity of detection of DNA. Such a system should be advantageously applied for development of automated process for detection of DNA.     

A highly specific microarray method for point mutation detection

Improvements of microarray techniques for genotyping purposes have focused on increasing the reliability of this method. Here we report the development of a genotyping method where a microarray was spotted with stemloop probes, especially designed to optimize the hybridization specificity of complementary DNA sequences. This accurate method was used to screen for four common disease-causing mutations involved in a neurological disorder called Charcot-Marie-Tooth disease (CMT). Healthy individuals' and patients' DNA were amplified and labeled by PCR and hybridized on microarray. The spot signal intensities were 81 to 408 times greater for perfect compared with mismatched target sequences, differing by only one nucleotide (discrimination ratio) for healthy individual "homozygous" DNA. On the other hand, "heterozygous" mutant DNA samples gave rise to signal intensity ratios close to 1, as expected. The genotypes obtained by this method were perfectly consistent with those determined by direct PCR sequencing. Cross-hybridization rates were very low, resulting in further multiplexing improvements. In this study, we also demonstrated the feasibility of real-time hybridization detection of labeled synthetic oligonucleotides with concentrations as low as 2.5 nM.     

Molecular characterization of transgenic shallots (Allium cepa L.) by adaptor ligation PCR (AL-PCR) and sequencing of genomic DNA flanking T-DNA borders

Genomic DNA blot hybridization is traditionally used to demonstrate that, via genetic transformation, foreign genes are integrated into host genomes. However, in large genome species, such as Allium cepa L., the use of genomic DNA blot hybridization is pushed towards its limits, because a considerable quantity of DNA is needed to obtain enough genome copies for a clear hybridization pattern. Furthermore, genomic DNA blot hybridization is a time-consuming method. Adaptor ligation PCR (AL-PCR) of genomic DNA flanking T-DNA borders does not have these drawbacks and seems to be an adequate alternative to genomic DNA blot hybridization. Using AL-PCR we proved that T-DNA was integrated into the A. cepa genome of three transgenic lines transformed with Agrobacterium tumefaciens EHA105 (pCAMBIA 1301). The AL-PCR patterns obtained were specific and reproducible for a given transgenic line. The results showed that T-DNA integration took place and gave insight in the number of T-DNA copies present. Comparison of AL-PCR and previously obtained genomic DNA blot hybridization results pointed towards complex T-DNA integration patterns in some of the transgenic plants. After cloning and sequencing the AL-PCR products, the junctions between plant genomic DNA and the T-DNA insert could be analysed in great detail. For example it was shown that upon T-DNA integration a 66bp genomic sequence was deleted, and no filler DNA was inserted. Primers located within the left and right flanking genomic DNA in transgenic shallot plants were used to recover the target site of T-DNA integration.     

Identification of repetitive, genome-specific probes in crucifer oilseed species.

Direct amplification of minisatellite DNA by PCR (DAMD PCR) was used to amplify and subsequently clone several fragments of DNA from crucifer species. The PCR-derived fragments of DNA were generated using known minisatellite core sequences as PCR primers. Southern hybridization of these putative minisatellite DNA fragments revealed that many were genome-specific; they hybridized with high affinity only to the genomic DNA of the species from which they were cloned. The DNA fragments were believed to be dispersed in the genome, based on smear-like hybridization signals on EcoRI-, BamHI-, and HindIII-digested genomic DNA. Genome-specific probes were specifically isolated from Brassica rapa (A genome), Brassica nigra (B genome), and Sinapis alba in addition to several other crucifer species. The sequence of a B. rapa specific probe (pBr17.1.3A) contained a minisatellite region that could be divided into three tandem repeats; each repeat contained between two and five subrepeats and each subrepeat shared a highly conserved core region of 29 bp. This minisatellite sequence also hybridized with high affinity to the A genome species B. napus and B. juncea. This research showed that dispersed, genome-specific probes can be isolated using DAMD PCR and that these probes could be used to detect and quantify alien DNA present in progeny from intergeneric or interspecific crosses.     

Detection of Y-bearing porcine spermatozoa by in situ hybridization using digoxigenin-labeled,porcine male-specific DNA probe produced by polymerase chain reaction

This study was carried out to determine whether Y-bearing porcine spermatozoa could be detected by in situ hybridization using a digoxigenin (Dig)-labelled DNA probe specific to the Y chromosome produced by polymerase chain reaction (PCR). A conventional PCR (with Dig-dUTP) was performed using a set of oligonucleotide primers (5′-AAGTGGTCAGCGTGTCCATA-3′ and 5′-TTTCTCCTGTATCCTCCTGC-3′) for 236 bp fragment of porcine male-specific DNA sequence and 1.25 × 10⁴ template white blood cells obtained from a boar. When fluorescence in situ hybridization with the Dig-labelled DNA probe was applied to the metaphase chromosome spreads prepared from both boar and gilts, the fluorescein signal was only detected on the long arm of the Y chromosome. In addition, immunocytochemical detection with the Dig-labelled DNA probe and alkaline phosphatase-labeled anti-Dig was applied to both sperm nuclei pretreated with dithiothreitol and white blood cells; 51% of sperm nuclei and 96% of white blood cells obtained from boar were labelled, whereas none of white blood cells obtained from gilts were labelled with the Dig-labelled DNA probe. The results indicated that in situ hybridization with porcine male-specific DNA probe produced by PCR made possible the direct visualization of Y-bearing porcine spermatozoa by in situ hybridization. © 1995 Wiley-Liss, Inc.     

Hybridization biosensor using di(2,2'-bipyridine)osmium (III) as electrochemical indicator for detection of polymerase chain reaction product of hepatitis B virus DNA

A novel hepatitis B virus (HBV) DNA biosensor was developed by immobilizing covalently single-stranded HBV DNA fragments to a gold electrode surface via carboxylate ester to link the 3(')-hydroxy end of the DNA with the carboxyl of the thioglycolic acid (TGA) monolayer. A short-stranded HBV DNA fragment (181bp) of known sequence was obtained and amplified by PCR. The surface hybridization of the immobilized single-stranded HBV DNA fragment with its complementary DNA fragment was evidenced by electrochemical methods using [Os(bpy)(2)Cl(2)](+) as a novel electroactive indicator. The formation of double-stranded HBV DNA on the gold electrode resulted in a great increase in the peak currents of [Os(bpy)(2)Cl(2)](+) in comparison with those obtained at a bare or single-stranded HBV DNA-modified electrode. The mismatching experiment indicated that the surface hybridization was specific. The difference between the responses of [Os(bpy)(2)Cl(2)](+) at single-stranded and double-stranded DNA/TGA gold electrodes suggested that the label-free hybridization biosensor could be conveniently used to monitor DNA hybridization with a high sensitivity. X-ray photoelectron spectrometry technique has been employed to characterize the immobilization of single-stranded HBV DNA on a gold surface.     

Detection of hepatopancreatic parvovirus in Thai shrimp Penaeus monodon by in situ hybridization,dot blot hybridization and PCR amplification

Hepatopancreatic parvovirus (HPV) infects the hepatopancreas in penaeid shrimp and retards their growth. The DNA sequence of HPV from Thai shrimp Penaeus monodon (HPVmon) differs from HPV of Penaeus chinensis (HPVchin) by approximately 30%. In spite of this difference, commercial PCR primers (DiagXotics) developed from HPVchin to yield a 350 bp PCR product do give a 732 bp product with HPVmon DNA template. On the other hand, the sensitivity of HPVmon detection with these primers and with hybridization probes designed for HPVchin is significantly lower than it is with HPVchin. To improve sensitivity for HPVmon detection, we used the sequence of the 732 bp HPVmon PCR amplicon described above to develop specific PCR primers (H441F and H441R) and hybridization probe. The primers could detect as little as 1 fg of purified HPVmon DNA while the 441 bp digoxygenin-labeled PCR product gave strong, specific reactions with in situ hybridization and with hybridization blots. In contrast, negative results were obtained using DNA from all other pathogens tested and from DNA of P. monodon. Supernatant solution from boiled, fresh shrimp fecal and postlarval samples homogenized in 0.025% NaOH/0.0125% SDS could be used to detect as little as 0.1 pg HPVmon DNA by the PCR reaction. By dot blot hybridization, a visible signal was obtained with purified HPVmon DNA at 0.01 pg, but detection in spiked feces and postlarval samples was only 1 and 0.1 pg, respectively.     

Defined oligonucleotide tag pools and PCR screening in signature-tagged mutagenesis of essential genes from bacteria

We describe a fast and simple method for signature-tagged mutagenesis (STM) using defined oligonucleotides for tag construction into mini-Tn5 and PCR instead of hybridization for rapid screening of bacterial mutants in vivo. A collection of 12 unique 21-mers were synthesized as complementary DNA strands to tag bacterial mutants constructed by insertional mutagenesis using pUTmini-Tn5Km2 plasmids. Tags were tested in a combination of assays by PCR and compared to hybridization for specificity and for large-scale screening. Each defined tag has the same melting temperature, an invariable region to optimize PCRs and a variable region for specific amplification by PCR. A series of "suicide" plasmids carrying mini-Tn5s, each with a specific tag, were transferred into Pseudomonas aeruginosa, giving 12 libraries of mutants; groups of 12 mutants were pooled and arrayed into 96-well microplates, representing approximately one-sixth of the P. aeruginosa 5.9-Mb genome. This simple STM method can be adapted to any bacterial system and used for genome scanning in various growth conditions.