Modeling of mechanical properties and structural design of spider web

With a unique combination of strength and toughness among materials, spider silk is the model for engineering materials. This paper presents the stress-strain behavior of Nephila clavipes spider silk under tension, transverse compression, and torsional deformation obtained by a battery of micro testing equipment. The experimental results showed significantly higher toughness than the state-of-the-art fibers in tension and in transverse compression. Higher shear modulus was also observed for the spider silk comparing to other liquid crystalline fibers such as aramid fibers. On the basis of the experimental results finite element analysis is used to simulate static and dynamic properties of spider web and to explore the role of both material properties and architectural design in its structural integrity and mechanical performance.     

Hexagonal columnar liquid crystal in the cells secreting spider silk

The liquid crystallinity of spider dragline silk dope is thought to be important for both the spinning process and the extreme mechanical properties of the final thread. Although the formation of the liquid crystalline units is poorly understood, it has been suggested that spider silk proteins are secreted in a random coil and then aggregate end-to-end into rod-shaped units to form supramolecular liquid crystals. However, evidence presented here from transmission electron microscopy indicates that coat protein of the dragline silk of a Nephila spider is stored as hexagonal columnar liquid crystals within the intracellular secretory vesicles. This implies that this component is already folded into short rods within the gland cells and forms molecular rather than supramolecular liquid crystals.     

Web building and silk properties functionally covary among species of wolf spider

Although phylogenetic studies have shown covariation between the properties of spider major ampullate (MA) silk and web building, both spider webs and silks are highly plastic so we cannot be sure whether these traits functionally covary or just vary across environments that the spiders occupy. As MaSp2‐like proteins provide MA silk with greater extensibility, their presence is considered necessary for spider webs to effectively capture prey. Wolf spiders (Lycosidae) are predominantly non‐web building, but a select few species build webs. We accordingly collected MA silk from two web‐building and six non‐web‐building species found in semirural ecosystems in Uruguay to test whether the presence of MaSp2‐like proteins (indicated by amino acid composition, silk mechanical properties and silk nanostructures) was associated with web building across the group. The web‐building and non‐web‐building species were from disparate subfamilies so we estimated a genetic phylogeny to perform appropriate comparisons. For all of the properties measured, we found differences between web‐building and non‐web‐building species. A phylogenetic regression model confirmed that web building and not phylogenetic inertia influences silk properties. Our study definitively showed an ecological influence over spider silk properties. We expect that the presence of the MaSp2‐like proteins and the subsequent nanostructures improves the mechanical performance of silks within the webs. Our study furthers our understanding of spider web and silk co‐evolution and the ecological implications of spider silk properties.     

Spinning an elastic ribbon of spider silk

The Sicarid spider Loxosceles laeta spins broad but very thin ribbons of elastic silk that it uses to form a retreat and to capture prey. A structural investigation into this spider's silk and spinning apparatus shows that these ribbons are spun from a gland homologous to the major ampullate gland of orb web spiders. The Loxosceles gland is constructed from the same basic parts (separate transverse zones in the gland, a duct and spigot) as other spider silk glands but construction details are highly specialized. These differences are thought to relate to different ways of spinning silk in the two groups of spiders. Loxosceles uses conventional die extrusion, feeding a liquid dope (spinning solution) to the slit-like die to form a flat ribbon, while orb web spiders use an extrusion process in which the silk dope is processed in an elongated duct to produce a cylindrical thread. This is achieved by the combination of an initial internal draw down, well inside the duct, and a final draw down, after the silk has left the spigot. The spinning mechanism in Loxosceles may be more ancestral.     

Novel In Silico Analyses of Repetitive Spider Silk Sequences to Understand the Evolution and Mechanical Properties of Fibrous Protein Materials

The mechanical properties of spider silks have diverged as spiders have diversely speciated. Because the main components of silks are proteins, it is valuable to investigate their sequences. However, silk sequences have been regarded as difficult information to analyze due to their imbalance and imperfect tandem repeats (ITR). Here, an in silico approach is applied to systemically analyze a group of silk sequences. It is found that every time new spider groups emerge, unique trimer motifs appear. These trimer motifs are used to find additional clues of evolution and to determine relationships with mechanical properties. For the first time, crucial evidence is provided that shows silk sequences coevolved with spider species and the mechanical properties of their fibers to adapt to new living environments. This novel approach can be used as a platform for analyzing other groups of ITR‐harboring proteins and to obtain information for the design of tailor‐made fibrous protein materials.     

NMR characterization of native liquid spider dragline silk from Nephila edulis

Solid spider dragline silk is well-known for its mechanical properties. Nonetheless a detailed picture of the spinning process is lacking. Here we report NMR studies on the liquid silk within the wide sac of the major ampullate (m.a.) gland from the spider Nephila edulis. The resolution in the NMR spectra is shown to be significantly improved by the application of magic-angle spinning (MAS). From the narrow width of the resonance lines and the chemical shifts observed, it is concluded that the silk protein within the wide sac of the m.a. gland is dynamically disordered throughout the molecule in the sense that each amino acid of a given type senses an identical environment, on average. The NMR data obtained are consistent with an isotropic liquid phase.     

Microdissection of Black Widow Spider Silk-producing Glands

Modern spiders spin high-performance silk fibers with a broad range of biological functions, including locomotion, prey capture and protection of developing offspring ^1,2. Spiders accomplish these tasks by spinning several distinct fiber types that have diverse mechanical properties. Such specialization of fiber types has occurred through the evolution of different silk-producing glands, which function as small biofactories. These biofactories manufacture and store large quantities of silk proteins for fiber production. Through a complex series of biochemical events, these silk proteins are converted from a liquid into a solid material upon extrusion.Mechanical studies have demonstrated that spider silks are stronger than high-tensile steel ³. Analyses to understand the relationship between the structure and function of spider silk threads have revealed that spider silk consists largely of proteins, or fibroins, that have block repeats within their protein sequences ⁴. Common molecular signatures that contribute to the incredible tensile strength and extensibility of spider silks are being unraveled through the analyses of translated silk cDNAs. Given the extraordinary material properties of spider silks, research labs across the globe are racing to understand and mimic the spinning process to produce synthetic silk fibers for commercial, military and industrial applications. One of the main challenges to spinning artificial spider silk in the research lab involves a complete understanding of the biochemical processes that occur during extrusion of the fibers from the silk-producing glands.Here we present a method for the isolation of the seven different silk-producing glands from the cobweaving black widow spider, which includes the major and minor ampullate glands [manufactures dragline and scaffolding silk] ^5,6, tubuliform [synthesizes egg case silk] ^7,8, flagelliform [unknown function in cob-weavers], aggregate [makes glue silk], aciniform [synthesizes prey wrapping and egg case threads] ⁹ and pyriform [produces attachment disc silk] ¹⁰. This approach is based upon anesthetizing the spider with carbon dioxide gas, subsequent separation of the cephalothorax from the abdomen, and microdissection of the abdomen to obtain the silk-producing glands. Following the separation of the different silk-producing glands, these tissues can be used to retrieve different macromolecules for distinct biochemical analyses, including quantitative real-time PCR, northern- and western blotting, mass spectrometry (MS or MS/MS) analyses to identify new silk protein sequences, search for proteins that participate in the silk assembly pathway, or use the intact tissue for cell culture or histological experiments.     

Artificial skin--culturing of different skin cell lines for generating an artificial skin substitute on cross-weaved spider silk fibres

Background

In the field of Plastic Reconstructive Surgery the development of new innovative matrices for skin repair is in urgent need. The ideal biomaterial should promote attachment, proliferation and growth of cells. Additionally, it should degrade in an appropriate time period without releasing harmful substances, but not exert a pathological immune response. Spider dragline silk from Nephila spp meets these demands to a large extent.

Methodology/Principal Findings

Native spider dragline silk, harvested directly out of Nephila spp spiders, was woven on steel frames. Constructs were sterilized and seeded with fibroblasts. After two weeks of cultivating single fibroblasts, keratinocytes were added to generate a bilayered skin model, consisting of dermis and epidermis equivalents. For the next three weeks, constructs in co-culture were lifted on an originally designed setup for air/liquid interface cultivation. After the culturing period, constructs were embedded in paraffin with an especially developed program for spidersilk to avoid supercontraction. Paraffin cross- sections were stained in Haematoxylin & Eosin (H&E) for microscopic analyses.

Conclusion/Significance

Native spider dragline silk woven on steel frames provides a suitable matrix for 3 dimensional skin cell culturing. Both fibroblasts and keratinocytes cell lines adhere to the spider silk fibres and proliferate. Guided by the spider silk fibres, they sprout into the meshes and reach confluence in at most one week. A well-balanced, bilayered cocultivation in two continuously separated strata can be achieved by serum reduction, changing the medium conditions and the cultivation period at the air/liquid interphase. Therefore spider silk appears to be a promising biomaterial for the enhancement of skin regeneration.     

Silk production in a spider involves acid bath treatment

We studied physiological conditions during the spinning of dragline silk by the garden cross spider, Araneus diadematus. Silk is converted from the liquid feedstock in the gland into a solid thread via a tapering tubular duct and exits at a spigot. The distal part of the tubule appears specialized for ion transport and the management of the pH inside the lumen. Thus, it appears that spider silk in vivo, like some industrial polymers in vitro, is spun through an acid bath.     

Liquid crystals and flow elongation in a spider's silk production line

Our observations on whole mounted major ampullate silk glands suggested that the thread is drawn from a hyperbolic die using a pre-orientated lyotropic liquid crystalline feedstock. Polarizing microscopy of the gland''s duct revealed two liquid crystalline optical textures: a curved pattern in the feedstock within the ampulla of the gland and, later in the secretory pathway, the cellular texture previously identified in synthetic nematic liquid crystals. The behaviour of droplet inclusions within the silk feedstock indicated that elongational flow at a low shear rate occurs in the gland''s duct and may be important in producing an axial molecular orientation before the final thread is drawn. Our observations suggested that the structure of the spider''s silk production pathway and the liquid crystalline feedstock are both involved in defining the exceptional mechanical properties of spider dragline silk.     

Structural conformation of spidroin in solution: a synchrotron radiation circular dichroism study

Spider silk is made and spun in a complex process that tightly controls the conversion from soluble protein to insoluble fiber. The mechanical properties of the silk fiber are modulated to suit the needs of the spider by various factors in the animal's spinning process. In the major ampullate (MA) gland, the silk proteins are secreted and stored in the lumen of the ampulla. A particular structural fold and functional activity is determined by the spidroins' amino acid sequences as well as the gland's environment. The transition from this liquid stage to the solid fiber is thought to involve the conversion of a predominantly unordered structure to a structure rich in beta-sheet as well as the extraction of water. Circular dichroism provides a quick and versatile method for examining the secondary structure of silk solutions and studying the effects of various conditions. Here we present the relatively novel technique of synchrotron radiation based circular dichroism as a tool for investigating biomolecular structures. Specifically we analyze, in a series of example studies on structural transitions induced in liquid silk, the type of information accessible from this technique and any artifacts that might arise in studying self-assembling systems.     

Ultrastructure of spider thread anchorages

Spiders attach silken threads to substrates by means of glue-coated nanofibers (piriform silk), spun into disc-like structures. The organization and ultrastructure of this nano-composite silk are largely unknown, despite their implications for the biomechanical function and material properties of thread anchorages. In this work, the ultrastructure of silken attachment discs was studied in representatives of four spider families with Transmission Electron Microscopy to facilitate a mechanistic understanding of piriform silk function across spiders. Based on previous findings from comparative studies of piriform silk gland morphology, we hypothesized that the fibre-glue proportion of piriform silk differs in different spiders, while the composition of fibre and glue fractions is consistent. Results confirmed large differences in the relative proportion of glue with low amounts in the orb weaver Nephila senegalensis (Araneidae) and the hunting spider Cupiennius salei (Ctenidae), larger amounts in the cobweb spider Parasteatoda tepidariorum (Theridiidae) and a complete reduction of the fibrous component in the haplogyne spider Pholcus phalangioides (Pholcidae). We rejected our hypothesis that glue ultrastructure is consistent. The glue is a colloid with polymeric and fluid fractions that strongly differ in proportions and assembly. We further confirmed that in all species studied both dragline and piriform silk fibres do not make contact with the environmental substrate. Instead, adhesion is established by a thin dense skin layer of the piriform glue. These results advance our understanding of piriform silk function and the interspecific variation of its properties, which is significant for spider biology, web function and the bioengineering of silk.     

蜘蛛丝的组成结构与生物学功能

蜘蛛是纺丝种类最多的一种节肢动物,目前共发现有8种丝腺,各纺出具有不同生物学功能的丝纤维,可分别用于织网、捕食、逃避、扩散、织制卵袋等行为活动。蜘蛛丝是一种天然的动物蛋白纤维,是随蜘蛛4亿年进化的结果,也是为蜘蛛的生存与繁殖所设计的,蜘蛛丝的适应与进化使蜘蛛丝具有多样化的生物学功能。但蜘蛛不是唯一能纺丝的节肢动物,除蛛形纲以外,还有其它很多节肢动物,如昆虫纲和多足纲的动物都有具有丝腺,能纺出一种或多种丝蛋白纤维。本文将以昆虫作为比较来概述蜘蛛丝腺的起源与种类,蜘蛛丝的化学组成、结构、种类与其生物学功能。     

蜘蛛丝蛋白研究进展

由于蜘蛛丝蛋白分子高度重复的一级结构、特殊的溶解特性和分子折叠行为以及具有形成非凡力学特性丝纤维的能力而引人注目。本文从蛛丝蛋白基因、天然蛛丝形成过程、蛛丝蛋白的基因工程生产及蛛丝蛋白的应用前景等几个方面着重介绍了近20年来对蛛丝蛋白的研究进展。围绕蛛丝蛋白展开的研究将有助于揭示蛋白质一级结构、蛋白质分子折叠与蛋白质大分子特性之间的内在联系。     

Design of superior spider silk: from nanostructure to mechanical properties

Spider dragline silk is of practical interest because of its excellent mechanical properties. However, the structure of this material is still largely unknown. In this article, we report what we believe is a new model of the hierarchical structure of silk based on scanning electron microscope and atomic force microscope images. This hierarchical structure includes beta-sheet, polypeptide chain network, and silk fibril. It turns out that an exceptionally high strength of the spider dragline silk can be obtained by decreasing the size of the crystalline nodes in the polypeptide chain network while increasing the degree of orientation of the crystalline nodes. Based on this understanding, how the reeling speed affects mechanical properties of spider dragline silk can be understood properly. Hopefully, the understanding obtained in this study will shed light on the formation of spider silk, and consequently, on the principles for the design of ultrastrong silk.     

Amyloidogenic nature of spider silk.

In spiders soluble proteins are converted to form insoluble silk fibres, stronger than steel. The final fibre product has long been the subject of study; however, little is known about the conversion process in the silk-producing gland of the spider. Here we describe a study of the conversion of the soluble form of the major spider-silk protein, spidroin, directly extracted from the silk gland, to a beta-sheet enriched state using circular dichroism (CD) spectroscopy. Combined with electron microscopy (EM) data showing fibril formation in the beta-sheet rich region of the gland and amino-acid sequence analyses linking spidroin and amyloids, these results lead us to suggest that the refolding conversion is amyloid like. We also propose that spider silk could be a valuable model system for testing hypotheses concerning beta-sheet formation in other fibrilogenic systems, including amyloids.     

利用生物工程技术生产蜘蛛丝的研究进展

蜘蛛丝是一种高分子蛋白纤维,具有高强度、高弹性等许多重要的优良特性,在军事、医学、工业、建筑、纺织等领域具有广泛而巨大的应用。然而蜘蛛的产丝量小,且无法高密度养殖以获取大量的蜘蛛丝,难以满足实际应用的需要。于是人们只能着眼于生物工程方法,即将蜘蛛丝蛋白基因转入其它生物体来表达生产蜘蛛丝蛋白,经过多年的研究,已取得很多重要的进展。对蜘蛛丝蛋白在微生物、植物、哺乳动物及家蚕等不同生物载体中表达的研究进展进行重点阐述,并探讨了已有研究的不足和今后研究展望,为进一步探索和研发蜘蛛丝的规模化生产方法提供借鉴与参考。     

Spider silks: recombinant synthesis,assembly, spinning,and engineering of synthetic proteins

Since thousands of years humans have utilized insect silks for their own benefit and comfort. The most famous example is the use of reeled silkworm silk from Bombyx mori to produce textiles. In contrast, despite the more promising properties of their silk, spiders have not been domesticated for large-scale or even industrial applications, since farming the spiders is not commercially viable due to their highly territorial and cannibalistic nature. Before spider silks can be copied or mimicked, not only the sequence of the underlying proteins but also their functions have to be resolved. Several attempts to recombinantly produce spider silks or spider silk mimics in various expression hosts have been reported previously. A new protein engineering approach, which combines synthetic repetitive silk sequences with authentic silk domains, reveals proteins that closely resemble silk proteins and that can be produced at high yields, which provides a basis for cost-efficient large scale production of spider silk-like proteins.