Fabrication of highly porous scaffolds for tissue engineering based on star-shaped functional poly(ε-caprolactone)

The potential of novel functional star‐shaped poly(ε‐caprolactone)s of controlled molecular weight and low molecular weight distribution bearing acrylate end groups as material for biomedical applications was demonstrated in this study. The polymers were functionalized via Michael‐type addition of amino acid esters containing amino or thiol groups showing the potential for immobilization of biomolecules. Furthermore, scaffolds of different geometries were prepared by uniaxial freezing of polymer solutions followed by freeze drying. Different solvents and polymer concentrations were investigated, resulting in scaffolds with porosities between 76 and 96%. Mechanical properties of the scaffolds were investigated and the morphology was determined via scanning electron microscopy. Scaffolds with interconnected channels were prepared using benzene, 1,2‐dichloroethane or dioxane as solvent. The tubular longitudinal pores in honeycomb arrangement extend throughout the full extent of the scaffolds (typical pore sizes: 20–100 µm). Biotechnol. Bioeng. 2011; 108:694–703. © 2010 Wiley Periodicals, Inc.     

Electrospun PLGA�Csilk fibroin�Ccollagen nanofibrous scaffolds for nerve tissue engineering

Electrospun nanofibrous scaffolds varying different materials are fabricated for tissue engineering. PLGA, silk fibroin, and collagen-derived scaffolds have been proved on good biocompatibility with neurons. However, no systematic studies have been performed to examine the PLGA-silk fibroin-collagen (PLGA-SF-COL) biocomposite fiber matrices for nerve tissue engineering. In this study, different weight ratio PLGA-SF-COL (50:25:25, 30:35:35) scaffolds were produced via electrospinning. The physical and mechanical properties were tested. The average fiber diameter ranged from 280 + 26 to 168 + 21 nm with high porosity and hydrophilicity; the tensile strength was 1.76 ± 0.32 and 1.25 ± 0.20 Mpa, respectively. The results demonstrated that electrospinning polymer blending is a simple and effective approach for fabricating novel biocomposite nanofibrous scaffolds. The properties of the scaffolds can be strongly influenced by the concentration of collagen and silk fibroin in the biocomposite. To assay the cytocompatibility, Schwann cells were seeded on the scaffolds; cell attachment, growth morphology, and proliferation were studied. SEM and MTT results confirmed that PLGA-SF-COL scaffolds particularly the one that contains 50% PLGA, 25% silk fibroin, and 25% collagen is more suitable for nerve tissue engineering compared to PLGA nanofibrous scaffolds.     

Electrospun poly (ɛ-caprolactone)/silk fibroin core-sheath nanofibers and their potential applications in tissue engineering and drug release

One of the key tenets of tissue engineering is to develop scaffold materials with favorable biodegradability, surface properties, outstanding mechanical strength and controlled drug release property. In this study, we generated core-sheath nanofibers composed of poly (?-caprolactone) (PCL) and silk fibroin (SF) blends via emulsion electrospinning. Nanofibrous scaffolds were characterized by combined techniques of scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), contact angle and tensile measurements. An in vitro FITC release study was conducted to evaluate sustained release potential of the core-sheath structured nanofibers. We found that the conformation of SF contained in PCL/SF composite nanofibers was transformed from random coil to β-sheet when treated with methanol, leading to improved crystallinity and tensile strength of nanofibrous scaffolds. The hydrophobicity and diameter of nanofibers decreased when we increased the content of SF in PCL/SF composite nanofibers. Furthermore, we evaluated the potential of fabricated PCL/SF composite nanofibers as scaffold in vitro. The results confirmed that fabricated PCL/SF scaffolds improved cell attachment and proliferation. Our results demonstrated the feasibility to generate core-sheath nanofibers composed of PCL and SF using a single-nozzle technique. The produced nanofibrous scaffolds with sustained drug release have potential application in tissue engineering.     

Repetitive Arg-Gly-Asp peptide as a cell-stimulating agent on electrospun poly(ϵ-caprolactone) scaffold for tissue engineering

Electrospun scaffolds derived from poly(ϵ-caprolactone) (PCL), a well known biodegradable material, have an architecture that is suitable for hosting cells. However, their biomedical applications are restricted because these scaffolds lack the bioactivity necessary to stimulate cell responses. In this work, a repetitive Arg-Gly-Asp (rRGD) peptide was produced as a cell-stimulating agent to provide the PCL scaffold with bioactivity. DNA encoding rRGD was amplified by polymerase chain reaction using overlap primers without a DNA template, and cloned into a protein expression vector to produce a His-tag fusion peptide. In an in vitro cell adhesion assay, the purified rRGD peptide, comprising 30 RGD repeats, promoted a 1.5-fold greater cell adhesion than the commercial tripeptide RGD. The rRGD peptide was immobilized onto an electrospun PCL scaffold that had been pretreated with argon plasma and graft-polymerized with acrylic acid. Fourier transform infrared (FTIR) analysis indicated that covalently linked rRGD peptide was present on the scaffold. The PCL scaffold with immobilized rRGD showed significantly changed hydrophilic properties and an enhanced adhesion and proliferation of mouse fibroblast cells by 2.3- and 2.9-fold, respectively, compared to the PCL scaffold alone. Through its ability to promote cell adhesion and proliferation, the rRGD peptide has great potential as a stimulant for improving the suboptimal cell-matrix interaction of polymeric scaffolds for tissue engineering applications.     

Functionalized hydrophobic poly(glycerol-co-ε-caprolactone) depots for controlled drug release

A limitation to many polymer-based drug delivery systems is the lack of ability to customize a particular polymer composition for tailoring drug release kinetics to a specific clinical application. In this study, we investigated the structure-property effects of conjugating various hydrophobic biocompatible side chains to poly(glycerol-co-caprolactone) copolymers with the goal of achieving prolonged and controlled release of a chemotherapeutic agent. The choice of side chain significantly affected the resulting polymer properties including thermal transitions, relative crystallinity (ΔH(f)), and hydrophobicity. Drug-loaded films cast from solutions of polymer and 10-hydroxycamptothecin demonstrated prolonged release from four to over seven weeks depending upon side chain structure without initial burst release behavior. Use of the stearic acid-conjugated poly(glycerol-co-caprolactone) films afforded substantial anticancer activity in vitro for at least 50 days when exposed to fresh cultures of A549 human lung cancer cells over 24 h intervals, correlating well with the measured drug release kinetics.     

Biodegradable molecularly imprinted polymers based on poly(ε-caprolactone)

Novel biodegradable molecularly imprinted polymers (MIPs) based on poly(ε-caprolactone) (PCL) were prepared by combining two important properties required of ideal biomaterials, biodegradability (with biocompatibility) and molecular recognition properties. Acrylate or methacrylate end-capped PCL macromers were synthesized through the reaction of PCL diol or triol with acryloyl or methacryloyl chloride. The synthesis of acrylate or methacrylate end-capped macromers was confirmed using FT-IR and H NMR spectroscopic techniques. These macromers were used to prepare biodegradable crosslinked networks by photopolymerization with functional monomer (acrylic acid) and a model template (theophylline). The theophylline-imprinted polymer showed higher binding capacity for theophylline compared with non-imprinted polymer (NIP), and also showed selectivity for theophylline over caffeine (similar structure molecules). PCL-based MIP degraded 8% of the initial weight in 30 days in phosphate-buffered saline (PBS) solution (pH 7.4) and over 90% of the initial weight within 24 h in 1 N NaOH at 37°C.     

Electrospun Poly(L-lactide)/Poly(ε-caprolactone) Blend Nanofibrous Scaffold: Characterization and Biocompatibility with Human Adipose-Derived Stem Cells

The essence of tissue engineering is the fabrication of autologous cells or induced stem cells in naturally derived or synthetic scaffolds to form specific tissues. Polymer is thought as an appealing source of cell-seeded scaffold owing to the diversity of its physicochemical property and can be electrospun into nano-size to mimic natural structure. Poly (L-lactic acid) (PLLA) and poly (ε-caprolactone) (PCL) are both excellent aliphatic polyester with almost “opposite” characteristics. The controlling combination of PLLA and PCL provides varying properties and makes diverse applications. Compared with the copolymers of the same components, PLLA/PCL blend demonstrates its potential in regenerative medicine as a simple, efficient and scalable alternative. In this study, we electrospun PLLA/PCL blends of different weight ratios into nanofibrous scaffolds (NFS) and their properties were detected including morphology, porosity, degradation, ATR-FTIR analysis, stress-stain assay, and inflammatory reaction. To explore the biocompatibility of the NFS we synthesized, human adipose-derived stem cells (hASCs) were used to evaluate proliferation, attachment, viability and multi-lineage differentiation. In conclusion, the electrospun PLLA/PCL blend nanofibrous scaffold with the indicated weight ratios all supported hASCs well. However, the NFS of 1/1 weight ratio showed better properties and cellular responses in all assessments, implying it a biocompatible scaffold for tissue engineering.     

Structural and Surface Compatibility Study of Modified Electrospun Poly(ε-caprolactone) (PCL) Composites for Skin Tissue Engineering

In this study, biodegradable poly(ε-caprolactone) (PCL) nanofibers (PCL-NF), collagen-coated PCL nanofibers (Col-c-PCL), and titanium dioxide-incorporated PCL (TiO₂-i-PCL) nanofibers were prepared by electrospinning technique to study the surface and structural compatibility of these scaffolds for skin tisuue engineering. Collagen coating over the PCL nanofibers was done by electrospinning process. Morphology of PCL nanofibers in electrospinning was investigated at different voltages and at different concentrations of PCL. The morphology, interaction between different materials, surface property, and presence of TiO₂ were studied by scanning electron microscopy (SEM), Fourier transform IR spectroscopy (FTIR), contact angle measurement, energy dispersion X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). MTT assay and cell adhesion study were done to check biocompatibilty of these scaffolds. SEM study confirmed the formation of nanofibers without beads. FTIR proved presence of collagen on PCL scaffold, and contact angle study showed increment of hydrophilicity of Col-c-PCL and TiO₂-i-PCL due to collagen coating and incorporation of TiO₂, respectively. EDX and XPS studies revealed distribution of entrapped TiO₂ at molecular level. MTT assay and cell adhesion study using L929 fibroblast cell line proved viability of cells with attachment of fibroblasts over the scaffold. Thus, in a nutshell, we can conclude from the outcomes of our investigational works that such composite can be considered as a tissue engineered construct for skin wound healing.     

Photo-cross-linked biodegradable poly(ester anhydride) networks prepared from alkenylsuccinic anhydride functionalized poly(ε-caprolactone) precursors

Biodegradable poly(ester anhydride) networks based on linear and star-shaped poly(ε-caprolactone)-based precursors were synthesized with the aim of obtaining matrixes suitable for release of macromolecular active agents. The ring-opening polymerization yielded hydroxyl telechelic oligomers, which were end-functionalized with succinic anhydride or with alkenylsuccinic anhydrides containing 8, 12, or 18 carbons in their alkenyl chains. Before cross-linking, the acid-terminated oligomers were reacted with methacrylic anhydride to obtain methacrylated precursors containing labile anhydride bonds. The degrees of substitution for the acid functionalization and methacrylation were >93%. Cross-linking of the precursors was carried out with visible light at room temperature. Gel contents and cross-linking densities were higher for networks cross-linked from the star-shaped precursors than for networks prepared from the linear precursors. In in vitro erosion tests, the presence of the alkenyl chain slowed down the erosion rate. The networks exhibited characteristic surface erosion: the mass loss was linear, whereas the dimensions of the specimens decreased steadily. A macromolecular release study showed the release of the model compound to be linear and in proportion to the mass loss.     

Synthesis and solution behavior of poly(ε-caprolactone) grafted hydroxyethyl cellulose copolymers

Trimethylsilylated hydroxyethyl cellulose (TMSHEC) was synthesized by using hexamethyldisilazane (HMDS) as silylated agent. With the partial protection of hydroxyl groups of HEC by silylation, the novel poly(?-polycaprolactone) (PCL) grafted HEC (HEC-g-PCL) copolymers were successfully prepared by homogenous ring-opening graft polymerization and deprotection procedure. The structure of HEC-g-PCL copolymers was characterized by FTIR and 1H NMR. Fluorescence spectrum of HEC-g-PCL copolymer dilute solution indicated that copolymers could associate and form hydrophobic microdomains in aqueous solution. With the increasing of grafted PCL content, the critical association concentration (cac) of HEC-g-PCL copolymers decreased. The surface tension of HEC-g-PCL copolymers decreased dramatically with the increasing of the concentration and then approached to a plateau value when concentration was above the cac of HEC-g-PCL copolymers. The hydrodynamic radius of the aggregate of copolymer in dilute solution was found to increase with the increasing of the grafted PCL content. When the concentration of copolymer was above the cac, the zero-shear viscosity of the copolymer increased sharply and became much higher than that of HEC at the same concentration.     

Lipase-catalyzed synthesis of poly(ε-caprolactone) and characterization of its solid-state properties

Abstract

Ring-opening polymerization of ε-caprolactone has been successfully conducted using an immobilized form of Candida antarctica lipase B as catalyst. The effects of enzyme concentration, reaction medium, reaction temperature and time on monomer conversion and product molecular weight were investigated. Through optimization of reaction conditions, poly(ε-caprolactone) (PCL) was obtained with 99% monomer conversion and a number-average molecular weight (M_n) of 18870 g/mol. The reaction system was then scaled up, and PCL was synthesized in 78% isolated yield, with M_n and polydispersity index of 41540 g/mol and 1.69, respectively. The solid-state properties of this sample were systematically evaluated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarized optical microscopy (POM). The product PCL showed excellent thermal stability, with degradation of the main chain in the temperature range of 280–450°C. Remarkably, this high molecular weight PCL was a typical crystalline polymer with a high degree of crystallinity observed by DSC, WAXD and POM.     

Galactose-decorated cross-linked biodegradable poly(ethylene glycol)-b-poly(ε-caprolactone) block copolymer micelles for enhanced hepatoma-targeting delivery of paclitaxel

The inferior in vivo stability of micellar drugs has been a prime challenge for their application in targeted drug delivery. Here we report on novel galactose-decorated covalently cross-linked biodegradable micelles based on photo-cross-linkable poly(ethylene glycol)-b-poly(acryloyl carbonate)-b-poly(ε-caprolactone) (PEG-PAC-PCL) and galactose-conjugated PEG-PCL (Gal-PEG-PCL) copolymers for enhanced hepatoma-targeting delivery of paclitaxel (PTX). The molecular weight of PEG in Gal-PEG-PCL was higher than that in PEG-PAC-PCL, thereby fully exposing Gal ligands at the micellar surface. These micelles, either with or without loading of PTX, were readily cross-linked by UV irradiation to afford micelles with small sizes (ca. 79-94 nm) and enhanced stability. The in vitro release studies confirmed that drug release from cross-linked micelles was significantly inhibited. Interestingly, MTT assays showed that Gal-decorated PTX-loaded cross-linked micelles retained a high antitumor activity in HepG2 cells, which was much more effective than PTX-loaded cross-linked micelles without Gal ligands and comparable to Gal-decorated PTX-loaded non-cross-linked micelles. Remarkably, the preliminary in vivo antitumor efficacy studies in SMMC-7721 tumor (human hepatoma)-bearing nude mice revealed that Gal-decorated PTX-loaded cross-linked micelles inhibited the growth of the human hepatoma more effectively than PTX-loaded cross-linked micelles as well as Gal-decorated PTX-loaded non-cross-linked micelles. These results indicate that Gal-decorated cross-linked PEG-PCL micelles have great potential in liver tumor-targeted chemotherapy.     

Hybrid poly-l-lactic acid/poly(ε-caprolactone) nanofibrous scaffold can improve biochemical and molecular markers of human induced pluripotent stem cell-derived hepatocyte-like cells

A suitable alternative strategy for liver transplantation is the use of nanofibrous scaffolds together with stem cells. In this study, a random hybrid of poly-l -lactic acid (PLLA) and poly(ε-caprolactone) (PCL) was used as a three-dimensional (3D) culture for differentiation of hepatocyte-like cells and compared with routine culture (two-dimensional [2D]). The expression of the endodermal marker, forkhead box A2 (FOXA2), was assessed on Day 3 and the hepatic markers; albumin (ALB), α-1 antitrypsin (AAT), and cytokeratin-18 (CK-18) were evaluated on Day 18 using quantitative polymerase chain reaction qPCR. As well as, ALB, α-fetoprotein (AFP), and low-density lipoprotein (LDL) uptake were evaluated using immunocytochemistry; moreover, periodic acid-Schiff and Oil Red were done by cell staining. In addition, AFP and urea production were evaluated by chemiluminescence and colorimetric assays. Light and scanning electron microscopy (SEM) showed changes in the cells in 2D and 3D models. The gene expression of hepatic markers was significantly higher in the 3D cultures. In addition, immunocytochemistry and cell staining showed that ALB, AFP, LDL-uptake, periodic acid-Schiff, and Oil Red were expressed in both cells derived on 2D and 3D. Furthermore, the evaluation of AFP and urea secretion was significantly different between 2D and 3D strategies. These findings suggest that functionally cells cultured on a PLLA/PCL scaffold may be suitable for cell therapy and regenerative medicine.     

Investigation of polymer and nanoparticle properties with nicotinic acid and p-aminobenzoic acid grafted on poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) via click chemistry

In this study, the grafting of nicotinic acid and p-aminobenzoic acid (PABA) onto poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) was performed by Huisgen's 1,3-dipolar cycloaddition, also known as click chemistry. Concentrations used for grafting were 0.10, 0.20, and 0.30 molar ratios with respect to caproyl units. The grafted copolymers were successfully obtained at all ratios as confirmed by NMR, GPC, and FT-IR. According to the DSC results, the polymorphisms of these grafted copolymers were mostly changed from semicrystalline to amorphous depending on the type and the amount of grafting compounds. TGA thermograms showed different thermal stabilities of the grafted copolymers compared to the original copolymers. Cytotoxicity results from HUVEC models suggested that the toxicity of grafted nanoparticles increased with the molar ratios of grafting units. Due to differences in molecular structure between nicotinic acid and PABA, physicochemical properties (particle size and surface charge) of grafted copolymer nanoparticles were substantially different. With increasing molar ratio of the grafting units, the particle size of blank nanoparticles tended to increase, resulting from an increase in the hydrophobic fragments of the grafted copolymer. Ibuprofen was chosen as a model drug to evaluate the interaction between grafted copolymers and loaded drug. After ibuprofen loading, the particle size of the loaded nanoparticles of both grafted copolymers increased compared to that of the blank nanoparticles. Significant differences in loading capacity between nicotinic acid and PABA grafted copolymer nanoparticles were clearly shown. This is most likely a result of different compatibility between each grafting compound and ibuprofen, including hydrogen bond interaction, π-π stacking interaction, and steric hindrance.     

Biodegradation of poly(ε-caprolactone) (PCL) by a new Penicillium oxalicum strain DSYD05-1

In this study, fungi isolated from soil were screened for their ability to form clear zones on agar plates with emulsified poly(ε-caprolactone) (PCL). The most active strain, designated as DSYD05, was identified as Penicillium oxalicum on the basis of morphological characteristics and phylogenetic analysis. Mutant DSYD05-1, obtained by ultraviolet-light mutagenesis from strain DSYD05, was more effective in PCL degradation. In liquid cultures of the mutant strain with PCL emulsion, DSYD05-1 showed the highest PCL-degrading activity after 4?days of cultivation. The products of PCL degradation were analysed by mass spectrometry; the results indicated that 6-hydroxyhexanoic acid was produced and assimilated during cultivation. The degradation of PCL film by DSYD05-1 was observed by scanning electron microscopy, and was indicative of a three-stage degradation process. The degradation of amorphous parts of the film preceded that of the crystalline center and then the peripheral crystalline regions. In addition, DSYD05-1 showed a wide range of substrate specificity, with capability to degrade PCL, poly(β-hydroxybutyrate), and poly(butylene succinate), but not poly(lactic acid), indicating that the strain could have potential for application in the treatment or recycling of bio-plastic wastes.     

Synthesis of poly(lactide-co-glycolide-co-ε-caprolactone)-graft-mannosylated poly(ethylene oxide) copolymers by combination of "clip" and "click" chemistries

Poly(lactide-co-glycolide) (PLGA) is extensively used in pharmaceutical applications, for example, in targeted drug delivery, because of biocompatibility and degradation rate, which is easily tuned by the copolymer composition. Nevertheless, synthesis of sugar-labeled amphiphilic copolymers with a PLGA backbone is quite a challenge because of high sensitivity to hydrolytic degradation. This Article reports on the synthesis of a new amphiphilic copolymer of PLGA grafted by mannosylated poly(ethylene oxide) (PEO). A novel building block, that is, α-methoxy-ω-alkyne PEO-clip-N-hydroxysuccinimide (NHS) ester, was prepared on purpose by photoreaction of a diazirine containing molecular clip. This PEO block was mannosylated by reaction of the NHS ester groups with an aminated sugar, that is, 2-aminoethyl-α-d-mannopyroside. Then, the alkyne ω-end-group of PEO was involved in a copper alkyne- azide coupling (CuAAC) with the pendent azides of the aliphatic copolyester. The targeted mannose-labeled poly(lactide-co-glycolide-co-ε-caprolactone)-graft-poly(ethylene oxide) copolymer was accordingly formed. Copolymerization of d,l-lactide and glycolide with α-chloro-ε-caprolactone, followed by substitution of chlorides by azides provided the azido-functional PLGA backbone. Finally, micelles of the amphiphilic mannosylated graft copolymer were prepared in water, and their interaction with Concanavalin A (ConA), a glyco-receptor protein, was studied by quartz crystal microbalance. This study concluded to the prospect of using this novel bioconjugate in targeted drug delivery.     

Preparation and characterization of chitosan and trimethyl-chitosanmodified poly-(ε-caprolactone) nanoparticles as DNA carriers

The purpose of this research was to prepare poly-(ε-caprolactone) (PCL) particles by an emulsion-diffusion-evaporation method using a blend of poly-(vinyl alcohol) and chitosan derivatives as stabilizers. The chitosan derivatives used were chitosan hydrochloride and trimethyl chitosans (TMC) with varying degrees of quaternization. Particle characteristics-size, zeta potential, surface morphology, cytotoxicity, and transfection efficiency-were investigated. The developed method yields PCL nanoparticles in the size range of 250 to 300 nm with a positive surface charge (2.5 to 6.8 mV). The cytotoxicity was found to be moderate and virtually independent of the stabilizers' concentration with the exception of the highly quaternized TMC (degree of substitution 66%) being significantly more toxic. In immobilization experiments with gel electrophoresis, it could be shown that these cationic nanoparticles (NP) form stable complexes with DNA at a NP:DNA ratio of 3:1. These nanoplexes showed a significantly higher transfection efficiency on COS-1 cells than naked DNA. Published: August 10, 2005     

Thermally controlled release of anticancer drug from self-assembled γ-substituted amphiphilic poly(ε-caprolactone) micellar nanoparticles

A thermo-responsive poly{γ-2-[2-(2-methoxyethoxy)ethoxy]ethoxy-ε-caprolactone}-b-poly(γ-octyloxy-ε-caprolactone) (PMEEECL-b-POCTCL) diblock copolymer was synthesized by ring-opening polymerization using tin octanoate (Sn(Oct)(2)) catalyst and a fluorescent dansyl initiator. The PMEEECL-b-POCTCL had a lower critical solution temperature (LCST) of 38 °C, and it was employed to prepare thermally responsive micelles. Nile Red and Doxorubicin (DOX) were loaded into the micelles, and the micellar stability and drug carrying ability were investigated. The size and the morphology of the cargo-loaded micelles were determined by DLS, AFM, and TEM. The Nile-Red-loaded polymeric micelles were found to be stable in the presence of both fetal bovine serum and bovine serum albumin over a 72 h period and displayed thermo-responsive in vitro drug release. The blank micelles showed a low cytotoxicity. As comparison, the micelles loaded with DOX showed a much higher in vitro cytotoxicity against MCF-7 human breast cancer cell line when the incubation temperature was elevated above the LCST. Confocal laser scanning microscopy was used to study the cellular uptake and showed that the DOX-loaded micelles were internalized into the cells via an endocytosis pathway.     

Tissue engineering skin flaps: which vascular carrier, arteriovenous shunt loop or arteriovenous bundle, has more potential for angiogenesis and tissue generation?

This study was designed to clarify which vascular carrier, the arteriovenous shunt loop or the arteriovenous bundle, has more potential as a vascular carrier for an artificial skin flap in rats. An arteriovenous shunt loop was constructed between the femoral artery and vein using an interpositional artery (group I) or vein (group II) graft. For arteriovenous bundle groups, the femoral artery and vein were used and subdivided into two groups: distal ligation type (group III) and flow-through type (group IV). The vascular pedicle was wrapped with an artificial dermis and implanted beneath the inguinal skin for 4 weeks. For the control group, a folded sheet of artificial dermis without any vascular carrier was embedded. In experiment 1, the volumes of generated tissue within the artificial dermis were measured in the experimental and control groups (n = 5 in each group). In experiment 2, the origin of new blood vessels sprouting from the arteriovenous shunt loop and arteriovenous bundle were evaluated histologically. The volume of generated tissue in the shunt groups was significantly greater than that in the bundle groups (p < 0.01). However, the bundle groups also showed a great potential for producing new tissue. Serial histological studies showed that new capillaries were derived not only from the vasa vasorum of the femoral vessels but directly from the femoral vein in both the shunt and the bundle groups. This "sprouting" was extensively exhibited in the group III. Although the arteriovenous shunt loop showed a greater potential for producing new tissue and capillaries, the distal ligation type of bundle was thought to be an effective and practical vascular carrier for producing a tissue-engineered skin flap.     

Synthesis of poly(ε-caprolactone) by an immobilized lipase coated with ionic liquids in a solvent-free condition

Polycaprolactone (PCL) was synthesized by ring-opening polymerization of ε-caprolactone through two different enzymatic processes. The lipase from Candida antarctica B, immobilized on macroporous acrylic acid beads, was employed either untreated or coated with small amounts of ionic liquids (ILs). Monocationic ionic liquids, [C _n MIm][NTf₂] (n = 2, 6, 12), as well as a dicationic ionic liquid, ([C₄(C₆Im)₂][NTf₂]₂), were used to coat the immobilized lipase and also as the reaction medium. In both methods, the polarity, anion of the ILs concentration and viscosity strongly influenced the reaction. Coating the immobilized enzyme with ILs improved catalytic activity and less ILs was required to produce PCL with a higher molecular weight and reaction yield. At 60 °C and ILs/Novozyme-435 coating ratio of 3:1 (w/w) for 48 h, the highest M _w and reaction yield of PCL were 35,600 g/mol and 62 % in the case of [C₁₂MIm][NTf₂], while the M _w and reaction yield of PCL was 20,300 g/mol and 54 % with [C₁₂MIm][NTf₂] and catalyzed by untreated lipase.