Analyzing protein kinase dynamics in living cells with FRET reporters

Genetically encoded reporters based on fluorescence resonance energy transfer (FRET) are being developed for analyzing spatiotemporal dynamics of kinase activities in living cells, as the activities of this class of enzymes are often dynamically regulated and spatially compartmentalized within specific signaling context. Here we describe a general modular design and engineering strategies for the development of activity reporters for kinases of interest, using A-kinase activity reporter (AKAR) as an illustrative example. Discussed here are basic structure of such reporters, design considerations, reporter gene construction, cellular and in vitro characterization. Strategies for improving specificity, dynamic range or sensitivity, reversibility and integrity of the reporter as well as basic methods for live-cell time-lapse imaging using these reporters are summarized. Discussion of using this approach in the study of MAPK cascades is also provided. These FRET-based kinase activity reporters, along with analogous probes based on alternative designs, provide real-time tracking of kinase dynamics with subcellular resolution, which should complement other methods and offer great opportunities to delineate the molecular mechanisms underlying the complex regulation of kinases.     

Near-infrared fluorescent oligodeoxyribonucleotide reporters for sensing NF-kappaB DNA interactions in vitro

Two types of reporters for optical sensing of NF-kappaB p50 protein-oligodeoxyribonucleotide (ODN) duplex interactions were designed and compared in vitro. The reporters were based on the effect of fluorescence resonance energy transfer (FRET) between the pair donor Cy5.5 near-infrared (NIR) fluorochrome and either 800CW emitting fluorescence dye acceptor (800CW-Cy), or a nonemitting QSY 21 dye quencher (QSY-Cy). The donor and the acceptor dyes were covalently linked to the complementary oligonucleotides, respectively: Cy dye was conjugated to 3'-thiol, whereas 800CW or QSY21 were conjugated to a hydrophilic internucleoside phosphate amino linker. The reporters were tested initially using recombinant NF-kappaB p50 protein binding assays. Both reporters were binding p50 protein, which protected oligonucleotide duplex from degradation in the presence of exonuclease.The incubation of 800CW-Cy reporter in the presence of control or IL-1beta treated human endothelial cells showed the uptake of the reporter in the cytoplasm and the nucleus. The measurement of NIR fluorescence ratio (i.e. Cy5.5/800CW) showed a partial loss of FRET and the increased Cy5.5 fluorescence in nontreated, control cells. Thus, the specific p50 binding to ODN duplex reporters affected the donor-acceptor fluorochrome pair. NF-kappaB p50 exhibited the protective effect on FRET between NIR fluorochromes linked to the complementary strands of the reporter duplex.     

Spectral imaging and linear un-mixing enables improved FRET efficiency with a novel GFP2-YFP FRET pair

Spectral variants of the green fluorescent protein (GFP) have been extensively used as reporters to image molecular interactions in living cells by fluorescence resonance energy transfer (FRET). However, those GFP variants which are the most efficient donor acceptor pairs for FRET measurements show a high degree of spectral overlap which has hampered in the past their use in FRET applications. Here we use spectral imaging and subsequent un-mixing to quantitatively separate highly overlapping donor and acceptor emissions in FRET measurements. We demonstrate the method in fixed and living cells using a novel GFP based FRET pair (GFP2-YFP (yellow)), which has an increased FRET efficiency compared to the most commonly used FRET pair consisting of cyan fluorescent protein and YFP. Moreover, GFP2 has its excitation maximum at 396 nm at which the YFP acceptor is excited only below the detection level and thus this FRET pair is ideal for applications involving sensitized emission.     

Development of dual receptor biosensors: an analysis of FRET pairs

The development of a dual receptor detection method for enhanced biosensor monitoring was investigated by analyzing potential fluorescent resonance energy transfer (FRET) pairs. The dual receptor scheme requires the integration of a chemical transducer system with two unique protein receptors that bind to a single biological agent. The two receptors are tagged with special molecular groups (donors and acceptors fluorophores) while the chemical transduction system relies on the well-known mechanisms of FRET. During the binding event, the two FRET labeled receptors dock at the binding sites on the surface of the biological agent. The resulting close proximity of the two fluorophores upon binding will initiate the energy transfer resulting in fluorescence. The paper focuses on the analysis and optimization of the chemical transduction system. A variety of FRET fluorophore pairs were tested in a spectrofluorimeter and promising FRET pairs were then tagged to the protein, avidin and its ligand, biotin. Due to their affinities, the FRET-tagged biomolecules combine in solution, resulting in a stable, fluorescent signal from the acceptor FRET dye with a simultaneous decrease in fluorescent signal from the donor FRET dye. The results indicate that the selected FRET pairs can be utilized in the development of dual receptor sensors.     

Pyrene-perylene as a FRET pair coupled to the N2'-functionality of 2'-amino-LNA

Detection of nucleic acid hybridization via fluorescence resonance energy transfer (FRET) using pyren-1-ylmethyl and perylen-3-ylmethyl N2'-functionalized 2'-amino-LNA nucleosides incorporated into oligonucleotides exhibited a clear distance dependence of the FRET efficiency, ranging from below 10% when the fluorophores were approximately 40A apart to approximately 90% when the fluorophores were in close proximity.     

Fluorescent nanoparticles as labels for immunometric assay of C-reactive protein using two-photon excitation assay technology

We describe the use of fluorophore-doped nanoparticles as reporters in a recently developed ArcDia TPX bioaffinity assay technique. The ArcDia TPX technique is based on the use of polymer microspheres as solid-phase reaction carrier, fluorescent bioaffinity reagents, and detection of two-photon excited fluorescence. This new assay technique enables multiplexed, separation-free bioaffinity assays from microvolumes with high sensitivity. As a model analyte we chose C-reactive protein (CRP). The assay of CRP was optimized for assessment of CRP baseline levels using a nanoparticulate fluorescent reporter, 75 nm in diameter, and the assay performance was compared to that of CRP assay based on a molecular reporter of the same fluorophore core. The results show that using fluorescent nanoparticles as the reporter provides two orders of magnitude better sensitivity (87 fM) than using the molecular label, while no difference between precision profiles of the different assay types was found. The new assay method was applied for assessment of baseline levels of CRP in sera of apparently healthy individuals.     

Bidirectional fluorescence resonance energy transfer (FRET) in mutated and chemically modified yellow fluorescent protein (YFP)

Fluorescence resonance energy transfer (FRET) using fluorescent protein variants are used for studying the associations and biomolecular motions of macromolecules inside the cell. Intramolecular FRET utilizing fluorescent chemical labels has been applied in nucleic acid chemistry for detection of specific sequence. However, the biotechnological applications of intramolecular FRET in fluorescent proteins have not been exploited. This study demonstrates the intramolecular FRET between fluorescent protein and conjugated chemical label whereby FRET occurs from inside to outside and vice versa for fluorescent protein. The fluorescent protein is modified for the attachment of chemical fluorophores and the novel FRET pairs created by conjugation are MDCC (435/475)-Citrine (516/529) and Citrine-Alexa fluor (568/603). These protein-label pairs exhibited strong intramolecular FRET and the energy transfer efficiency was determined based on the time evolution of the ratio of emission intensities of labeled and unlabeled proteins. The efficiency was found to be 0.79 and 0.89 for MDCC-Citrine and 0.24 and 0.65 for Citrine-Alexa Fluor pairs when the label is conjugated at different sites in the protein. Fo?rster distance and the average distance between the fluorophores were also determined. The bidirectional approach described here can provide new insights into designing FRET-based sensors.     

Covalent labeling of cell-surface proteins for in-vivo FRET studies

Fluorescence resonance energy transfer (FRET) is a powerful technique to reveal interactions between membrane proteins in live cells. Fluorescence labeling for FRET is typically performed by fusion with fluorescent proteins (FP) with the drawbacks of a limited choice of fluorophores, an arduous control of donor-acceptor ratio and high background fluorescence arising from intracellular FPs. Here we show that these shortcomings can be overcome by using the acyl carrier protein labeling technique. FRET revealed interactions between cell-surface neurokinin-1 receptors simultaneously labeled with a controlled ratio of donors and acceptors. Moreover, using FRET the specific binding of fluorescent agonists could be monitored.     

Development of a cell-based fluorescence resonance energy transfer reporter for Bacillus anthracis lethal factor protease

We report the construction of a cell-based fluorescent reporter for anthrax lethal factor (LF) protease activity using the principle of fluorescence resonance energy transfer (FRET). This was accomplished by engineering an Escherichia coli cell line to express a genetically encoded FRET reporter and LF protease. Both proteins were encoded in two different expression plasmids under the control of different tightly controlled inducible promoters. The FRET-based reporter was designed to contain a LF recognition sequence flanked by the FRET pair formed by CyPet and YPet fluorescent proteins. The length of the linker between both fluorescent proteins was optimized using a flexible peptide linker containing several Gly-Gly-Ser repeats. Our results indicate that this FRET-based LF reporter was readily expressed in E. coli cells showing high levels of FRET in vivo in the absence of LF. The FRET signal, however, decreased five times after inducing LF expression in the same cell. These results suggest that this cell-based LF FRET reporter may be used to screen genetically encoded libraries in vivo against LF.     

Fluorescent semiconductor nanocrystals (quantum dots) in protein biochips

Understanding the biological processes in cells, tissues, and organisms requires the identification and analysis of multiple biological objects and the mechanisms of their functioning and regulation. The biological chip (biochip) technique is one of the most efficient tools for these tasks. Biochips are highly efficient and can quantitatively register multiple molecules simultaneously in samples of microscopic volume. Biochips allow the parallel genomic or proteomic analysis of normal or pathologically modified cells and tissues and a comparative analysis to elucidate disease-related changes. Fluorescent dyes used for signal readout from biochips have the following disadvantages: low photostability, low brightness, and the presence of a fluorescent background. It was recently shown that these limitations can be removed if fluorescent semiconductor nanocrystals (quantum dots) are used. Individual quantum dots in the form of colloid nanocrystals (QDs) are easily registered by conventional microscopic equipment due to their high brightness; they are extremely resistant to photobleaching and provide unique opportunities for multiplexing. QDs are ideal fluorophores for information readout from biochips and allow for the detection of single molecules. The present work is aimed at developing approaches for the use of QDs in biochip-based detection systems. The possibilities of using QDs in both planar (or matrix) biochips and suspension (or liquid) biochips, which are undergoing intensive development, are demonstrated. The use of the latter in analytical systems for the simultaneous identification of multiple objects in proteomics, genomics, drug testing, and clinical diagnostics is currently increasing. These systems are based on spectrally coded elements (usually polymer microspheres). An advantage of liquid biochips over matrix planar solid biochips is the possibility of the free movement of microspheres in three-dimensional space. Organic fluorophores allow the realization of a limited number of codes, i.e., objects analyzed simultaneously (multiplexing), while semiconductor QDs make possible a significant increase in both biochip multiplexing and the photostability and sensitivity of the biochips. In addition, the use of FRET (Foerster resonance energy transfer) in liquid biochips makes possible an increase in the detection specificity. The absence of a background signal from the fluorescent labels not bound to the microparticles increases the sensitivity of the analysis and provides additional opportunities for multiplex analysis and diagnostics. Thus, a combination of the biochip technique and semiconductor QDs makes it possible to increase the method’s sensitivity and the number of objects detected (the degree of multiplexing). This combination is likely to enable a significant breakthrough in proteomics, particularly in the development of new drugs, clinical diagnostics, identification of molecular markers, and elucidation of the intracellular processes.     

Imaging protein-protein interactions using fluorescence resonance energy transfer microscopy

Fluorescence resonance energy transfer (FRET) detects the proximity of fluorescently labeled molecules over distances >100 A. When performed in a fluorescence microscope, FRET can be used to map protein-protein interactions in vivo. We here describe a FRET microscopy method that can be used to determine whether proteins that are colocalized at the level of light microscopy interact with one another. This method can be implemented using digital microscopy systems such as a confocal microscope or a wide-field fluorescence microscope coupled to a charge-coupled device (CCD) camera. It is readily applied to samples prepared with standard immunofluorescence techniques using antibodies labeled with fluorescent dyes that act as a donor and acceptor pair for FRET. Energy transfer efficiencies are quantified based on the release of quenching of donor fluorescence due to FRET, measured by comparing the intensity of donor fluorescence before and after complete photobleaching of the acceptor. As described, this method uses Cy3 and Cy5 as the donor and acceptor fluorophores, but can be adapted for other FRET pairs including cyan fluorescent protein and yellow fluorescent protein.     

Probing complexes with single fluorophores: factors contributing to dispersion of FRET in DNA/RNA duplexes

Single molecule fluorescent microscopy is a method for the analysis of the dynamics of biological macromolecules by detecting the fluorescence signal produced by fluorophores associated with the macromolecule. Two fluorophores located in a close proximity may result in Förster resonance energy transfer (FRET), which can be detected at the single molecule level and the efficiency of energy transfer calculated. In most cases, the experimentally observed distribution of FRET efficiency exhibits a significant width corresponding to 0.07–0.2 (on a scale of 0–1). Here, we present a general approach describing the analysis of experimental data for a DNA/RNA duplex. We have found that for a 15 bp duplex with Cy3 and Cy5 fluorophores attached to the opposite ends of the helix, the width of the energy transfer distribution is mainly determined by the photon shot noise and the orientation factor, whereas the variation of inter-dye distances plays a minor role.     

Construction and optimization of a family of genetically encoded metabolite sensors by semirational protein engineering

A family of genetically-encoded metabolite sensors has been constructed using bacterial periplasmic binding proteins (PBPs) linearly fused to protein fluorophores. The ligand-induced conformational change in a PBP allosterically regulates the relative distance and orientation of a fluorescence resonance energy transfer (FRET)-compatible protein pair. Ligand binding is transduced into a macroscopic FRET observable, providing a reagent for in vitro and in vivo ligand-measurement and visualization. Sensors with a higher FRET signal change are required to expand the dynamic range and allow visualization of subtle analyte changes under high noise conditions. Various observations suggest that factors other than inter-fluorophore separation contribute to FRET transfer efficiency and the resulting ligand-dependent spectral changes. Empirical and rational protein engineering leads to enhanced allosteric linkage between ligand binding and chromophore rearrangement; modifications predicted to decrease chromophore rotational averaging enhance the signal change, emphasizing the importance of the rotational freedom parameter kappa2 to FRET efficiency. Tighter allosteric linkage of the PBP and the fluorophores by linker truncation or by insertion of chromophores into the binding protein at rationally designed sites gave rise to sensors with improved signal change. High-response sensors were obtained with fluorescent proteins attached to the same binding PBP lobe, suggesting that indirect allosteric regulation during the hinge-bending motion is sufficient to give rise to a FRET response. The optimization of sensors for glucose and glutamate, ligands of great clinical interest, provides a general framework for the manipulation of ligand-dependent allosteric signal transduction mechanisms.     

Fluorogenic ‘click-on’ dendrimer reporter for rapid profiling of cell proliferation

The application of small molecule fluorescent reporters to monitor biological systems is limited by their poor water solubility and background fluorescence of these reporters. Herein, we describe the synthesis and testing of a fluorogenic ‘click’ dendrimer reporter to monitor cellular processes. The reporter system consists of a polyamidoamine (PAMAM) dendrimer conjugated with 3-azido-7-hydroxy coumarin. After the copper(I)-catalyzed azide–alkyne cycloaddition reaction (‘click’ reaction) with alkyne-derivatized target molecules, the natively non-fluorescent construct has a strong enhancement in fluorescence. This fluorogenic dendrimer reporter can be used to efficiently monitor biological processes and the specificity afforded by the ‘click’ reaction greatly reduces background noise and enhances assay flexibility. We used this fluorogenic dendrimer reporter to monitor incorporation of 5-ethynyl-2′-deoxyuridine (EdU) into newly synthesized DNA, as a surrogate marker of cellular proliferation. We anticipate that this new class of fluorogenic reporter can be used to monitor a wide array of molecules and lends itself to high-throughput profiling of biological systems.     

Immunofluorescent labeling using covalently linked anti-phycoerythrin antibodies and phycoerythrin polymers

We have developed methods for covalently attaching anti-phycoerythrin (PE) MAbs to other antibodies, and for using PE or polymers of PE in conjunction with these conjugates to rapidly produce specific, high intensity fluorescent labeling of antigens. The performance of these systems was examined on the surface of microspheres and on the cell surface. The noncovalent means by which PE is incorporated into the label complex in this method makes it possible to use crude algal homogenate successfully as a source of PE in immunofluorescence assays. The intensity of labeling achieved using this method is comparable to, or in some cases better than, that obtained using a direct PE conjugate. With the aim of amplifying the intensity of fluorescence obtained, we produced two types of covalently linked complexes. These were an anti-PE MAb, designated PE6, linked to itself (i.e., PE6-PE6), and PE linked to itself (i.e., PE-PE). When used in a two-stage procedure in place of monomeric PE alone, these complexes increased the intensity of fluorescence obtained on the surface of microspheres by more than fourfold. On the cell surface, the performance of this system varied from one antigen to the next but in most cases was restricted to, at best, a 60% increase in the intensity of fluorescence and in many cases only about a 30% increase.     

Development of FRET biosensors for mammalian and plant systems

Genetically encoded biosensors are increasingly used in visualising signalling processes in different organisms. Sensors based on green fluorescent protein technology are providing a great opportunity for using Förster resonance energy transfer (FRET) as a tool that allows for monitoring dynamic processes in living cells. The development of these FRET biosensors requires careful selection of fluorophores, substrates and recognition domains. In this review, we will discuss recent developments, strategies to create and optimise FRET biosensors and applications of FRET-based biosensors for use in the two major eukaryotic kingdoms and elaborate on different methods for FRET detection.     

Automated live cell imaging of green fluorescent protein degradation in individual fibroblasts.

To accurately interpret the data from fluorescent proteins as reporters of gene activation within living cells, it is important to understand the kinetics of the degradation of the reporter proteins. We examined the degradation kinetics over a large number (>1,000) of single, living cells from a clonal population of NIH3T3 fibroblasts that were stably transfected with a destabilized, enhanced green fluorescent protein (eGFP) reporter driven by the tenascin-C promoter. Data collection and quantification of the fluorescence protein within a statistically significant number of individual cells over long times (14 h) by automated microscopy was facilitated by culturing cells on micropatterned arrays that confined their migration and allowed them to be segmented using phase contrast images. To measure GFP degradation rates unambiguously, protein synthesis was inhibited with cycloheximide. Results from automated live cell microscopy and image analysis indicated a wide range of cell-to-cell variability in the GFP fluorescence within individual cells. Degradation for this reporter was analyzed as a first order rate process with a degradation half-life of 2.8 h. We found that GFP degradation rates were independent of the initial intensity of GFP fluorescence within cells. This result indicates that higher GFP abundance in some cells is likely due to higher rates of gene expression, because it is not due to systematically lower rates of protein degradation. The approach described in this study will assist the quantification and understanding of gene activity within live cells using fluorescent protein reporters.     

Fluorescence-tagged monolignols: synthesis, and application to studying in vitro lignification

Fluorescence-tagged coniferyl alcohols, coniferyl alcohol γ-coupled by ethylenediamine spacers to dimethylaminocoumarin or nitrobenzofuran fluorophores, were tested as photoprobes to study the oxidase-mediated polymerization of monolignols. The fluorescent coniferyl alcohol derivatives readily underwent peroxidase-catalyzed in vitro copolymerization with coniferyl alcohol to yield fluorescent dehydrogenation polymers, the backbone polymers of which were structurally indistinguishable from polymers formed solely from coniferyl alcohol. To illustrate the use of the photoprobes, we successfully monitored in real time the complexation of coniferyl alcohol with horseradish apoperoxidase by Fo?rster resonance energy transfer (FRET) using the protein-tryptophan near the active site and a dimethylaminocoumarin moiety as donor and acceptor fluorophores. Furthermore, mixtures of fluorescence-tagged and normal coniferyl alcohols readily diffused into isolated maize cell walls and reacted with wall-bound peroxidases to form in muro artificial lignins that could be visualized by fluorescence microscopy. Thus we anticipate that fluorescence-tagged monolignols will be useful for in vitro and in vivo studies of cell wall lignification.     

Fluorescence-based glucose sensors

There is an urgent need to develop technology for continuous in vivo glucose monitoring in subjects with diabetes mellitus. Problems with existing devices based on electrochemistry have encouraged alternative approaches to glucose sensing in recent years, and those based on fluorescence intensity and lifetime have special advantages, including sensitivity and the potential for non-invasive measurement when near-infrared light is used. Several receptors have been employed to detect glucose in fluorescence sensors, and these include the lectin concanavalin A (Con A), enzymes such as glucose oxidase, glucose dehydrogenase and hexokinase/glucokinase, bacterial glucose-binding protein, and boronic acid derivatives (which bind the diols of sugars). Techniques include measuring changes in fluorescence resonance energy transfer (FRET) between a fluorescent donor and an acceptor either within a protein which undergoes glucose-induced changes in conformation or because of competitive displacement; measurement of glucose-induced changes in intrinsic fluorescence of enzymes (e.g. due to tryptophan residues in hexokinase) or extrinsic fluorophores (e.g. using environmentally sensitive fluorophores to signal protein conformation). Non-invasive glucose monitoring can be accomplished by measurement of cell autofluorescence due to NAD(P)H, and fluorescent markers of mitochondrial metabolism can signal changes in extracellular glucose concentration. Here we review the principles of operation, context and current status of the various approaches to fluorescence-based glucose sensing.     

Quantitative time domain analysis of lifetime‐based Förster resonant energy transfer measurements with fluorescent proteins: Static random isotropic fluorophore orientation distributions

Förster resonant energy transfer (FRET) measurements are widely used to obtain information about molecular interactions and conformations through the dependence of FRET efficiency on the proximity of donor and acceptor fluorophores. Fluorescence lifetime measurements can provide quantitative analysis of FRET efficiency and interacting population fraction. Many FRET experiments exploit the highly specific labelling of genetically expressed fluorescent proteins, applicable in live cells and organisms. Unfortunately, the typical assumption of fast randomization of fluorophore orientations in the analysis of fluorescence lifetime‐based FRET readouts is not valid for fluorescent proteins due to their slow rotational mobility compared to their upper state lifetime. Here, previous analysis of effectively static isotropic distributions of fluorophore dipoles on FRET measurements is incorporated into new software for fitting donor emission decay profiles. Calculated FRET parameters, including molar population fractions, are compared for the analysis of simulated and experimental FRET data under the assumption of static and dynamic fluorophores and the intermediate regimes between fully dynamic and static fluorophores, and mixtures within FRET pairs, is explored. Finally, a method to correct the artefact resulting from fitting the emission from static FRET pairs with isotropic angular distributions to the (incorrect) typically assumed dynamic FRET decay model is presented.