Metabolic engineering of Saccharomyces cerevisiae for bioconversion of D-xylose to D-xylonate

An NAD(+)-dependent D-xylose dehydrogenase, XylB, from Caulobacter crescentus was expressed in Saccharomyces cerevisiae, resulting in production of 17 ± 2 g D-xylonate l(-1) at 0.23 gl(-1)h(-1) from 23 g D-xylose l(-1) (with glucose and ethanol as co-substrates). D-Xylonate titre and production rate were increased and xylitol production decreased, compared to strains expressing genes encoding T. reesei or pig liver NADP(+)-dependent D-xylose dehydrogenases. D-Xylonate accumulated intracellularly to ～70 mgg(-1); xylitol to ～18 mgg(-1). The aldose reductase encoding gene GRE3 was deleted to reduce xylitol production. Cells expressing D-xylonolactone lactonase xylC from C. crescentus with xylB initially produced more extracellular D-xylonate than cells lacking xylC at both pH 5.5 and pH 3, and sustained higher production at pH 3. Cell vitality and viability decreased during D-xylonate production at pH 3.0. An industrial S. cerevisiae strain expressing xylB efficiently produced 43 g D-xylonate l(-1) from 49 g D-xylose l(-1).     

Saccharomyces cerevisiae engineered to produce D-xylonate

Saccharomyces cerevisiae was engineered to produce D-xylonate by introducing the Trichoderma reesei xyd1 gene, encoding a D-xylose dehydrogenase. D-xylonate was not toxic to S. cerevisiae, and the cells were able to export D-xylonate produced in the cytoplasm to the supernatant. Up to 3.8 g of D-xylonate per litre, at rates of 25–36 mg of D-xylonate per litre per hour, was produced. Up to 4.8 g of xylitol per litre was also produced. The yield of D-xylonate from D-xylose was approximately 0.4 g of D-xylonate per gramme of D-xylose consumed. Deletion of the aldose reductase encoding gene GRE3 in S. cerevisiae strains expressing xyd1 reduced xylitol production by 67%, increasing the yield of D-xylonate from D-xylose. However, D-xylose uptake was reduced compared to strains containing GRE3, and the total amount of D-xylonate produced was reduced. To determine whether the co-factor NADP⁺ was limiting for D-xylonate production the Escherichia coli transhydrogenase encoded by udhA, the Bacillus subtilis glyceraldehyde 3-phosphate dehydrogenase encoded by gapB or the S. cerevisiae glutamate dehydrogenase encoded by GDH2 was co-expressed with xyd1 in the parent and GRE3 deficient strains. Although each of these enzymes enhanced NADPH consumption on D-glucose, they did not enhance D-xylonate production, suggesting that NADP⁺ was not the main limitation in the current D-xylonate producing strains.     

“Use of acidophilic bacteria of the genus Acidithiobacillus to biosynthesize CdS fluorescent nanoparticles (quantum dots) with high tolerance to acidic pH”

The use of bacterial cells to produce fluorescent semiconductor nanoparticles (quantum dots, QDs) represents a green alternative with promising economic potential. In the present work, we report for the first time the biosynthesis of CdS QDs by acidophilic bacteria of the Acidithiobacillus genus. CdS QDs were obtained by exposing A. ferrooxidans, A. thiooxidans and A. caldus cells to sublethal Cd²⁺ concentrations in the presence of cysteine and glutathione. The fluorescence of cadmium-exposed cells moves from green to red with incubation time, a characteristic property of QDs associated with nanocrystals growth. Biosynthesized nanoparticles (NPs) display an absorption peak at 360 nm and a broad emission spectra between 450 and 650 nm when excited at 370 nm, both characteristic of CdS QDs. Average sizes of 6 and 10 nm were determined for green and red NPs, respectively. The importance of cysteine and glutathione on QDs biosynthesis in Acidithiobacillus was related with the generation of H₂S. Interestingly, QDs produced by acidophilic bacteria display high tolerance to acidic pH. Absorbance and fluorescence properties of QDs was not affected at pH 2.0, a condition that totally inhibits the fluorescence of QDs produced chemically or biosynthesized by mesophilic bacteria (stable until pH 4.5–5.0). Results presented here constitute the first report of the generation of QDs with improved properties by using extremophile microorganisms.     

Estudios de la viabilidad y la vitalidad frente al congelado de la levadura probiótica Saccharomyces boulardii: efecto del preacondicionamiento fisiológico

The aim of this study was to evaluate the vitality and viability of the probiotic yeast Saccharomyces boulardii after freezing/thawing and the physiological preconditioning effect on these properties. The results indicate that the specific growth rate (0.3/h^?1) and biomass (2-3 × 10⁸ cells/ml) of S. boulardii obtained in flasks shaken at 28 °C and at 37 °C were similar. Batch cultures of the yeast in bioreactors using glucose or sugar-cane molasses as carbon sources, reached yields of 0.28 g biomass/g sugar consumed, after 10 h incubation at 28 °C; the same results were obtained in fed batch fermentations. On the other hand, in batch cultures, the vitality of cells recovered during the exponential growth phase was greater than the vitality of cells from the stationary phase of growth. Vitality of cells from fed-batch fermentations was similar to that of stationary growing cells from batch fermentations. Survival to freezing at –20 °C and subsequent thawing of cells from batch cultures was 0.31% for cells in exponential phase of growth and 11.5% for cells in stationary phase. Pre-treatment of this yeast in media with water activity (a_w) 0.98 increased the survival to freezing of S. boulardii cells stored at –20 °C for 2 months by 10 fold. Exposure of the yeast to media of reduced a_w and/or freezing/thawing process negatively affected cell vitality. It was concluded that stress conditions studied herein decrease vitality of S. boulardii. Besides, the yeast strain studied presented good tolerance to bile salts even at low pH values.     

Characterization of a recombinant Escherichia coli TOP10 [pQR239] whole-cell biocatalyst for stereoselective Baeyer–Villiger oxidations

This paper describes the kinetic characterization of a recombinant whole-cell biocatalyst for the stereoselective Baeyer–Villiger type oxidation of bicyclo[3.2.0]hept-2-en-6-one to its corresponding regio-isomeric lactones (−)-(1S,5R)-2-oxabicyclo[3.3.0]oct-6-en-3-one and (−)-(1R,5S)-3-oxabicyclo[3.3.0]oct-6-en-2-one. Escherichia coli TOP10 [pQR239], expressing cyclohexanone monooxygenase (CHMO) from Acinetobacter calcoaceticus (NCIMB 9871), was shown to be suitable for this biotransformation since it expressed CHMO at a high level, was simple to produce, contained no contaminating lactone hydrolase activity and allowed the intracellular recycle of NAD(P)H necessary for the biotransformation. A small-scale biotransformation reactor (20 ml) was developed to allow rapid collection of intrinsic kinetic data. In this system, the optimized whole-cell biocatalyst exhibited a significantly lower specific lactone production activity (55–60 μmol min⁻¹ g⁻¹ dry weight) than that of sonicated cells (500 μmol min⁻¹ g⁻¹ dry weight). It was shown that this shortfall was comprised of a difference in the pH optima of the two biocatalyst forms and mass transfer limitations of the reactant and/or product across the cell barrier. Both reactant and product inhibition were evident. The optimum ketone concentration was between 0.2 and 0.4 g l⁻¹ and at product concentrations above 4.5–5 g l⁻¹ the specific activity of the whole cells was zero. These results suggest that a reactant feeding strategy and in situ product removal should be considered in subsequent process design.     

Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7

A thermophilic Bacillus sp. strain AN-7, isolated from a soil in India, produced an extracellular pullulanase upon growth on starch–peptone medium. The enzyme was purified to homogeneity by ammonium sulfate precipitation, anion exchange and gel filtration chromatography. The optimum temperature and pH for activity was 90 °C and 6.0. With half-life time longer than one day at 80 °C the enzyme proves to be thermostable in the pH range 4.5–7.0. The pullulanase from Bacillus strain lost activity rapidly when incubated at temperature higher than 105 °C or at pH lower than 4.5. Pullulanase was completely inhibited by the Hg²⁺ ions. Ca²⁺, dithiothreitol, and Mn²⁺ stimulated the pullulanase activity. Kinetic experiments at 80 °C and pH 6.0 gave V_max and K_m values of 154 U mg⁻¹ and 1.3 mg ml⁻¹. The products of pullulan were maltotriose and maltose. This proved that the purified pullulanase (pullulan-6-glucanohydrolase, EC 3.2.1.41) from Bacillus sp. AN-7 is classified under pullulanase type I. To our knowledge, this Bacillus pullulanase is the most highly thermostable type I pullulanase known to date.     

Ratiometric fluorescence imaging of nuclear pH in living cells using Hoechst-tagged fluorescein

Small-molecule fluorescent sensors that allow specific measurement of nuclear pH in living cells will be valuable for biological research. Here we report that Hoechst-tagged fluorescein (hoeFL), which we previously developed as a green fluorescent DNA-staining probe, can be used for this purpose. Upon excitation at 405 nm, the hoeFL–DNA complex displayed two fluorescence bands around 460 nm and 520 nm corresponding to the Hoechst and fluorescein fluorescence, respectively. When pH was changed from 8.3 to 5.5, the fluorescence intensity ratio (F₅₂₀/F₄₆₀) significantly decreased, which allowed reliable pH measurement. Moreover, because hoeFL binds specifically to the genomic DNA in cells, it was applicable to visualize the intranuclear pH of nigericin-treated and intact living human cells by ratiometric fluorescence imaging.     

Microbial surface displaying formate dehydrogenase and its application in optical detection of formate

In the present work, NAD⁺-dependent formate dehydrogenase (FDH), encoded by fdh gene from Candida boidinii was successfully displayed on Escherichia coli cell surface using ice nucleation protein (INP) from Pseudomonas borealis DL7 as an anchoring protein. Localization of matlose binding protein (MBP)-INP-FDH fusion protein on the E. coli cell surface was characterized by SDS-PAGE and enzymatic activity assay. FDH activity was monitored through the oxidation of formate catalyzed by cell-surface-displayed FDH with its cofactor NAD⁺, and the production of NADH can be detected spectrometrically at 340 nm. After induction for 24 h in Luria-Bertani medium containing isopropyl-β-d-thiogalactopyranoside, over 80% of MBP-INP-FDH fusion protein present on the surface of E. coli cells. The cell-surface-displayed FDH showed optimal temperature of 50 °C and optimal pH of 9.0. Additionally, the cell-surface-displayed FDH retained its original enzymatic activity after incubation at 4 °C for one month with the half-life of 17 days at 40 °C and 38 h at 50 °C. The FDH activity could be inhibited to different extents by some transition metal ions and anions. Moreover, the E. coli cells expressing FDH showed different tolerance to solvents. The recombinant whole cell exhibited high formate specificity. Finally, the E. coli cell expressing FDH was used to assay formate with a wide linear range of 5–700 μM and a low limit of detection of 2 μM. It is anticipated that the genetically engineered cells may have a broad application in biosensors, biofuels and cofactor regeneration system.     

Large conductance Ca2+-activated K+ channel (BKCa) activating properties of a series of novel N-arylbenzamides: Channel subunit dependent effects

Large conductance calcium activated potassium channels (BK_Ca) are fundamental in the control of cellular excitability. Thus, compounds that activate BK_Ca channels could provide potential therapies in the treatment of pathologies of the cardiovascular and central nervous system. A series of novel N-arylbenzamide compounds, and the reference compound NS1619, were evaluated for BK_Ca channel opener properties in Human Embryonic Kidney (HEK293) cells expressing the human BK_Ca channel α-subunit alone or α + β1-subunit complex.Channel activity was determined using a non-radioactive Rb⁺ efflux assay to construct concentration effect curves for each compound. All N-arylbenzamide compounds and NS1619 evoked significant (p <0.05) concentration related increases in Rb⁺ efflux both in cells expressing α-subunit alone or α + β1-subunits. Co-expression of the β1-subunit modified the Rb⁺ efflux responses, relative to that obtained in cells expressing the α-subunit alone, for most of the N-arylbenzamide compounds, in contrast to NS1619. The EC₄₀ values of NS1619, BKMe1 and BKOEt1 were not significantly affected by the co-expression of the BK_Ca channel α + β1-subunits. In contrast, 5 other N-arylbenzamides (BKPr2, BKPr3, BKPr4, BKH1 and BKVV) showed a significant (p <0.05) 2- to 10-fold increase in EC₄₀ values when tested on the BK_Ca α + β1-subunit expressing cells compared to BK_Ca α-subunit expressing cells. Further, the E_max values for BKPr4, BKVV and BKH1 were lower in the BK_Ca channel α + β1-subunit expressing cells.In conclusion, the N-arylbenzamides studied, like NS1619, were able to activate BK_Ca channels formed of the α-subunit only. The co-expression of the β1-subunit, however, modified the ability of certain compounds to active the channel leading to differentiated pharmacodynamic profiles.     

Efficient utilization of pentoses for bioproduction of the renewable two-carbon compounds ethylene glycol and glycolate

The development of lignocellulose as a sustainable resource for the production of fuels and chemicals will rely on technology capable of converting the raw materials into useful compounds; some such transformations can be achieved by biological processes employing engineered microorganisms. Towards the goal of valorizing the hemicellulose fraction of lignocellulose, we designed and validated a set of pathways that enable efficient utilization of pentoses for the biosynthesis of notable two-carbon products. These pathways were incorporated into Escherichia coli, and engineered strains produced ethylene glycol from various pentoses, including simultaneously from D-xylose and L-arabinose; one strain achieved the greatest reported titer of ethylene glycol, 40 g/L, from D-xylose at a yield of 0.35 g/g. The strategy was then extended to another compound, glycolate. Using D-xylose as the substrate, an engineered strain produced 40 g/L glycolate at a yield of 0.63 g/g, which is the greatest reported yield to date.     

Changes in chlorophyll a fluorescence in Euglena gracilis and Chlamydomonas reinhardtii after exposure to wood-ash

Recycling of wood-ash to boreal forests has been suggested to prevent depletion of essential soil nutrient or reduce the negative effects of acidification of surface waters. The aim of this investigation was to study the effects of different concentrations of wood-ash (5, 10 and 12.5 g l⁻¹ diluted in cultivating medium) on chlorophyll a fluorescence in Euglena gracilis and Chlamydomonas reinhardtii under laboratory conditions. The green alga C. reinhardtii was more susceptible to wood-ash solutions than the flagellate E. gracilis. Two different forms of wood-ash solutions were tested. In the first solution no adjustment of pH was made and after 7 days of incubation with wood-ash the pH for the different wood-ash concentrations (5, 10 and 12.5 g l⁻¹) were 8, 9 and 11, respectively. In the second solution, the pH was adjusted to 7. The results show that no negative effect on fluorescence yield (F_v/F_m), relative electron transport rate (ETR), photochemical quenching (qP) or non-photochemical quenching (NPQ) was observed in E. gracilis. In contrast, C. reinhardtii displayed strong inhibition at concentrations of 10 and 12.5 g l⁻¹ with non-adjusted pH. The negative effects of high pH on photochemical activity in C. reinhardtii could either be related to (1) the destruction of the ΔpH across the thylakoid membranes or (2) other parts in the photosynthetic systems that are negatively affected by changing pH. The results indicate that elevated pH levels due to wood-ash application could be an environmental stress factor to phytoplankton communities and may lead to loss of diversity among primary producers in aquatic ecosystems. If wood-ash application was to become general practice in or near aquatic ecosystems a rapid change in pH induced by wood-ash must be avoided.     

Simultaneous saccharification and fermentation of kraft pulp by recombinant Escherichia coli for phenyllactic acid production

Simultaneous saccharification and fermentation (SSF) of renewable cellulose for the production of 3-phenyllactic acid (PhLA) by recombinant Escherichia coli was investigated. Kraft pulp recovered from biomass fractionation processes was used as a model cellulosic feedstock and was hydrolyzed using 10–50 filter paper unit (FPU) g⁻¹ kraft pulp of a commercial cellulase mixture, which increased the glucose yield from 21% to 72% in an enzyme dose-dependent manner. PhLA fermentation of the hydrolyzed kraft pulp by a recombinant E. coli strain expressing phenylpyruvate reductase from Wickerhamia fluorescens TK1 produced 1.9 mM PhLA. The PhLA yield obtained using separate hydrolysis and fermentation was enhanced from 5.8% to 42% by process integration into SSF of kraft pulp (20 g L⁻¹) in a complex medium (pH 7.0) at 37 °C. The PhLA yield was negatively correlated with the initial glucose concentration, with a five-fold higher PhLA yield observed in culture medium containing 10 g L⁻¹ glucose compared to 100 g L⁻¹. Taken together, these results suggest that the PhLA yield from cellulose in kraft pulp can be improved by SSF under glucose-limited conditions.     

A stable immobilized d-psicose 3-epimerase for the production of d-psicose in the presence of borate

Maximal activity of the immobilized d-psicose 3-epimerase from Agrobacterium tumefaciens on Duolite A568 beads was achieved at pH 9.0 and 55 °C with borate, and at pH 8.5 and 50 °C without borate. The half-lives of the immobilized enzyme at 50 °C with and without borate were increased 4.2- and 128-fold compared to that of the free enzyme without borate, respectively. The immobilized enzyme with borate produced 441 g l^?1 psicose from 700 g l^?1 fructose at pH 9.0 and 55 °C, whereas 193 g l^?1 psicose was produced without borate at pH 8.5 and 50 °C after 120 min in a batch reaction. The immobilized enzyme in a packed-bed bioreactor without borate was produced continuously 325 g l^?1 psicose from 500 g l^?1 fructose at a dilution rate of 1.62 h^?1 over a 236 h period with productivity of 527 g l^?1 h^?1 while that without borate produced 146 g l^?1 psicose at 4.15 h^?1 over a 384-h period with productivity of 606 g l^?1 h^?1. The operational half-lives of the enzyme with and without borate in the bioreactor were 601 and 645 h, respectively. In the present study, psicose was produced stably with high productivity using the immobilized d-psicose 3-epimerase in the presence of borate.     

Purification and partial characterization of a 36-kDa chitinase from Bacillus thuringiensis subsp. colmeri,and its biocontrol potential

Chitinase A (ChiA) produced by Bacillus thuringiensis subsp. colmeri 15A3 (Bt. 15A3) was expressed in Escherichia coli XL-Blue. The ChiA was purified using Sephadex G-200 and its molecular mass was estimated to be 36 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Detection of chitinase activity on SDS-PAGE after protein renaturation indicated that the molecular mass of the protein band expressing chitinase activity was approximately 72 kDa. This suggests that the dimeric form of ChiA is the enzymatically active form when glycol chitin is used as a substrate. ChiA has optimal activity at 50 °C and retains most of its activity between 20 and 60 °C. The optimum pH for ChiA activity is pH 5.0, and the enzyme is active between pH 4.0 and 8.0. The enzyme activity was significantly inhibited by Ag⁺ and Zn²⁺. ChiA significantly inhibited the spore germination of four species of fungi. The median inhibitory concentrations (IC₅₀) of ChiA on the spore germination of Penicillium glaucum and Sclerotinia fuckelian were 11.27 and 10.57 μg/ml, respectively. In surface contamination bioassays, the crude ChiA protein (12.6 mU) reduced the LC₅₀ (50% lethal concentration) of the crystal protein of Bt. 15A3 against the larvae of Spodoptera exigua and Helicoverpa armigera.     

pH alters the swimming behaviors of the raphidophyte Heterosigma akashiwo: Implications for bloom formation in an acidified ocean

We investigated the effects of pH on movement behaviors of the harmful algal bloom causing raphidophyte Heterosigma akashiwo. Motility parameters from >8000 swimming tracks of individual cells were quantified using 3D digital video analysis over a 6-h period in 3 pH treatments reflecting marine carbonate chemistry during the pre-industrial era, currently, and the year 2100. Movement behaviors were investigated in two different acclimation-to-target-pH conditions: instantaneous exposure and acclimation of cells for at least 11 generations. There was no negative impairment of cell motility when exposed to elevated PCO₂ (i.e., low pH) conditions but there were significant behavioral responses. Irrespective of acclimation condition, lower pH significantly increased downward velocity and frequency of downward swimming cells (p < 0.001). Rapid exposure to lower pH resulted in 9% faster downward vertical velocity and up to 19% more cells swimming downwards (p < 0.001). Compared to pH-shock experiments, pre-acclimation of cells to target pH resulted in ~30% faster swimming speed and up to 46% faster downward velocities (all p < 0.001). The effect of year 2100 PCO₂ levels on population diffusivity in pre-acclimated cultures was >2-fold greater than in pH-shock treatments (2.2 × 10⁵ μm² s⁻¹ vs. 8.4 × 10⁴ μm² s⁻¹). Predictions from an advection-diffusion model, suggest that as PCO₂ increased the fraction of the population aggregated at the surface declined, and moved deeper in the water column. Enhanced downward swimming of H. akashiwo at low pH suggests that these behavioral responses to elevated PCO₂ could reduce the likelihood of dense surface slick formation of H. akashiwo through reductions in light exposure or growth independent surface aggregations. We hypothesize that the HAB alga's response to higher PCO₂ may exploit the signaling function of high PCO₂ as indicative of net heterotrophy in the system, thus indicative of high predation rates or depletion of nutrients.     

Sulfate reduction and microbial community of autotrophic biocathode in response to acidity

Microbial electrolysis cells (MECs) with autotrophic biocathode are a promising technology for removal of pollutants in wastewater. The aim of this study was to investigate the effect of initial acidity of wastewater on performance of sulfate-reducing biocathodes. MECs with biocathodes were operated with initial pH values of catholyte ranged from 3.0 to 7.0. The optimum initial pH value was 6.0 with a maximum sulfate reductive rate and biomass of 57 mg L⁻¹ d⁻¹ and 2.1 ± 0.4 mg g⁻¹, respectively. With initial pH 7.0, the pH value of catholyte increased to 9.8 ± 0.2 after an operation cycle, which resulted in low performance of the biocathode. A considerable sulfate reductive rate of 31 ± 0.85 mg L⁻¹ d⁻¹ was achieved with initial pH 3.0. Desulfovibrio sp. grew dominantly with abundance of 46%–66% in the cathode biofilm with initial pH values from 3.0 to 6.0 and contributed to the sulfate reduction. Clostridium and Parapedobacter also had high abundance in pH 6.0 cathode, indicated that interspecies electron transfer between electrochemical active and sulfate-reducing bacteria could play an important role in sulfate removal. The results suggest that acidity of catholyte is an important factor to be considered to utilize autotrophic biocathode MECs for wastewater treatment.     

Characterization of a recombinant N-acetylgalactosamine-6-sulfate sulfatase produced in E. coli for enzyme replacement therapy of Morquio A disease

Mucopolysaccharidosis IVA (MPS IVA) is a lysosomal storage disease caused by the deficiency of N-acetylgalactosamine-6-sulfate sulfatase (GALNS) enzyme. Currently, specific therapies are not available for MPS IVA patients. In this study, a biologically active recombinant GALNS enzyme (rGALNS) produced in Escherichia coli was purified through a two-step chromatography process. The effect of temperature and pH on purified rGALNS stability was evaluated, as well as the stability in human serum. Finally, the uptake of rGALNS by HEK 293 cells and MPS IVA fibroblasts was evaluated. The use of a semi-continuous process allowed the production of an active extracellular rGALNS, which was used for protein purification. The purified rGALNS showed a specific activity of 0.29 U mg^?1 and a production yield of 0.78 mg L^?1. The rGALNS presented an optimal pH of 5.5 and was stable for 8 days at 4 °C. In human serum it was stable for up to 6 h. rGALNS was not taken up by the cultured cells, suggesting that N-linked oligosaccharides are not necessary for the production of an active enzyme or enzyme stability but for the cell uptake of protein. This study shows the first characterization of rGALNS produced by E. coli, and provides important information about purification, stability, and glycosylations effect for this type of enzymes.     

Magnesium uptake of Arabidopsis transporters,AtMRS2-10 and AtMRS2-11, expressed in Escherichia coli mutants: Complementation and growth inhibition by aluminum

Magnesium (Mg^2 +) plays a critical role in many physiological processes. Mg^2 + transport systems in Salmonella have been well documented, but those in Escherichia coli have not been fully elucidated. We examined the effects of corA, mgtA, yhiD and corC gene deletion on Mg^2 + transport in E. coli. We obtained every combination of double, triple and quadruple mutants. The corA and mgtA double mutant required addition of 10 mM Mg^2 + to Luria-Bertani (LB) medium for growth, and the corA, mgtA and yhiD triple mutant TM2 required a higher Mg^2 + concentration. The Mg^2 + requirement of the quadruple mutant was similar to that of TM2. The results demonstrated that either CorA or MgtA is necessary for normal E. coli growth in LB medium and that YhiD plays a role in Mg^2 + transport under high Mg^2 + growth conditions in E. coli. The Arabidopsis Mg^2 + transporters, AtMRS2-10 and AtMRS2-11, were heterologously expressed in TM2 cells. TM2 cells expressing AtMRS2-10 and AtMRS2-11 could grow in LB medium that had been supplemented with 1 mM Mg^2 + and without Mg^2 + supplementation, respectively, and cell growth was inhibited by 2 mM AlCl₃. The results indicated that the growth of TM2 expressing AtMRS2-10 and AtMRS2-11 reflected these AtMRS2 function for Mg^2 + and aluminum. The E. coli TM2 cells are useful for functional analysis of Arabidopsis MRS2 proteins.     

Native-State Heterogeneity of β2-Microglobulin as Revealed by Kinetic Folding and Real-Time NMR Experiments

The kinetic folding of β₂-microglobulin from the acid-denatured state was investigated by interrupted-unfolding and interrupted-refolding experiments using stopped-flow double-jump techniques. In the interrupted unfolding, we first unfolded the protein by a pH jump from pH 7.5 to pH 2.0, and the kinetic refolding assay was carried out by the reverse pH jump by monitoring tryptophan fluorescence. Similarly, in the interrupted refolding, we first refolded the protein by a pH jump from pH 2.0 to pH 7.5 and used a guanidine hydrochloride (GdnHCl) concentration jump as well as the reverse pH jump as unfolding assays. Based on these experiments, the folding is represented by a parallel-pathway model, in which the molecule with the correct Pro32 cis isomer refolds rapidly with a rate constant of 5–6 s^? 1, while the molecule with the Pro32 trans isomer refolds more slowly (pH 7.5 and 25 °C). At the last step of folding, the native-like trans conformer produced on the latter pathway isomerizes very slowly (0.001–0.002 s^? 1) into the native cis conformer. In the GdnHCl-induced unfolding assays in the interrupted refolding, the native-like trans conformer unfolded remarkably faster than the native cis conformer, and the direct GdnHCl-induced unfolding was also biphasic, indicating that the native-like trans conformer is populated at a significant level under the native condition. The one-dimensional NMR and the real-time NMR experiments of refolding further indicated that the population of the trans conformer increases up to 7–9% under a more physiological condition (pH 7.5 and 37 °C).     

Integrated biooxidation and acid dehydration process for monohydroxylation of aromatics

We examined the performance of an integrated biooxidation and acid dehydration process for aromatic monohydroxylation using the production of o-cresol from toluene as the model conversion. A toluene cis-glycol dehydrogenase gene (todD)-disrupted mutant of Pseudomonas putida T-57 was employed as the whole cell biocatalyst for oxidizing toluene to toluene cis-glycol (TCG). After bioconversion of toluene to TCG, o-cresol was produced by adding HCl to the culture medium, since it was found that TCG became unstable at a low pH and underwent spontaneous dehydration. When the todD-disrupted mutant cells were grown in a two-liquid-phase culture system with oleyl alcohol as the organic solvent, this integrated process produced 40 g l⁻¹ of o-cresol in the organic solvent phase at 30 h. The total concentration of o-cresol in the two-liquid-phase culture reached 6.6 g l⁻¹ at 30 h, which was approximately four-fold greater than that in the single-liquid-phase culture.