Heritability of grain yield,plant height and test weight of a population of winter wheat adapted to Southwestern Ontario

Summary Grain yield, plant height and test weight were studied in a population of winter wheat (Triticum aestivum L.). The population consisted of F₂ bulk populations of 42 crosses among 11 genotypes adapted to S. W. Ontario. Heritabilities were: 0.30±0.32 for yield, 0.77±0.15 for height and 0.98±0.08 for test weight. Predicted genetic gain with 10% selection intensity was 0.15 t/ha for yield, 10.1 cm for height and 3.00 kg/hl for test weight. The low heritability for yield indicates that effective selection would require pedigree information and progeny tests, while the high heritabilities for height and test weight indicate that selection for these traits using single plots would be appropriate.     

Localization of quantitative trait loci (QTL) for agronomic important characters by the use of a RFLP map in barley (Hordeum vulgare L.)

Two hundred and fifty doubled haploid lines were studied from a cross between two 2-row winter barley varieties. The lines were evaluated for several characters in a field experiment for 3 years on two locations with two replications. From a total of 431 RFLP probes 50 were found to be polymorphic and subsequently used to construct a linkage map. Quantitative trait loci (QTLs) were determined and localized for resistance against Rhynchosporium secalis and Erysiphe graminis, for lodging, stalk breaking and ear breaking tendency, for the physical state before harvest, plant height, heading date, several kernel parameters and kernel yield. The heritability of the traits ranged from 0.56 to 0.89. For each trait except for kernel thickness, QTLs have been localized that explain 5–52% of the genetic variance. Transgressive segregation occurred for all of the traits studied.     

普通玉米籽粒性状的遗传效应分析

采用二倍体种子遗传模型及其分析方法,研究了５个玉米籽粒性状的直接效应、母体效应和细胞质效应．分析结果表明,各性状的遗传同时受种子直接效应和母体效应的影响,细胞质基因对百粒重和粒宽具有极显著影响．除粒长、粒厚的直接显性效应与母体显性效应间的协方差外,直接效应与母体效应间的协方差均不显著．因此,通过母体植株的表现可对这些性状进行有效的选择．Ｓ_２２和 ８７－１是改良粒重的优良亲本．选择粒较宽的自交系作母本有利于提高后代选系及Ｆ_１的百粒重．     

Genetic information from progeny trials: a comparison between progenies generated by open pollination and by controlled crosses

When conifer progenies generated by open pollination are assessed in field tests, it is usually assumed that all progenies of the same mother are true half-sibs. This assumption may be invalid, leading to overestimation of additive genetic variation and heritability and to biased breeding values. From one Scots pine (Pinus sylvestris) and one Norway spruce (Picea abies) seed orchard, containing 28 and 36 parent clones, respectively, progenies generated by open pollination (OP) and by controlled crosses (CC) were planted in adjacent trials at two to three sites in southern Sweden. The tree height and diameter at breast height were measured, and genetic parameters based on these traits were estimated for OP and CC progenies separately, in order to enable comparisons. Narrow-sense heritability estimates for Scots pine and Norway spruce OP progenies (in the ranges 0.04–0.13 and 0.15–0.38, respectively) did not differ significantly from CC estimates (0.07–0.12 and 0.23–0.30), suggesting that OP-based heritability values were not overestimated to any great extent. Similarly, genetic correlations between OP and CC progenies were in the ranges of 0.87–0.88 and 0.74–0.77 for Scots pine and Norway spruce, respectively, being significantly lower than unity only in the case of Norway spruce. OP-based breeding values for both species should therefore correspond well with those predicted from CC progenies, albeit not perfectly for Norway spruce. In conclusion, the assumption of true half-sibs for OP progenies was not violated to the extent that genetic parameter estimates or breeding value predictions were seriously biased.     

Quantitative trait loci for rice yield-related traits using recombinant inbred lines derived from two diverse cultivars

The thousand-grain weight and spikelets per panicle directly contribute to rice yield. Heading date and plant height also greatly influence the yield. Dissection of genetic bases of yield-related traits would provide tools for yield improvement. In this study, quantitative trait loci (QTL) mapping for spikelets per panicle, thousand-grain weight, heading date and plant height was performed using recombinant inbred lines derived from a cross between two diverse cultivars, Nanyangzhan and Chuan7. In total, 20 QTLs were identified for four traits. They were located to 11 chromosomes except on chromosome 4. Seven and five QTLs were detected for thousand-grain weight and spikelets per panicle, respectively. Four QTLs were identified for both heading date and plant height. About half the QTLs were commonly detected in both years, 2006 and 2007. Six QTLs are being reported for the first time. Two QTL clusters were identified in regions flanked by RM22065 and RM5720 on chromosome 7 and by RM502 and RM264 on chromosome 8, respectively. The parent, Nanyangzhan with heavy thousand-grain weight, carried alleles with increased effects on all seven thousand-grain weight QTL, which explained why there was no transgressive segregation for thousand-grain weight in the population. In contrast, Chuan7 with more spikelets per panicle carried positive alleles at all five spikelets per panicle QTL except qspp5. Further work on distinction between pleiotropic QTL and linked QTL is needed in two yield-related QTL clusters.     

Identification of quantitative trait loci and epistatic interactions for plant height and heading date in rice

Appropriate heading date and plant height are prerequisites for attaining the desired yield level in rice breeding programs. In this study, we analyzed the genetic bases of heading date and plant height at both single- locus and two-locus levels, using a population of 240 F_2:3 families derived from a cross between two elite rice lines. Measurements for the traits were obtained over 2 years in replicated field trials. A linkage map was constructed with 151 polymorphic marker loci, based on which interval mapping was performed using Mapmaker/QTL. The analyses detected six QTLs for plant height and six QTLs for heading date; collectively the QTLs for heading date accounted for a much greater amount of phenotypic variation than did the QTLs for plant height. Two-way analyses of variance, with all possible two-locus combinations, detected large numbers (from 101 to 257) of significant digenic interactions in the 2 years for both traits involving markers distributed in the entire genome; 22 and 39 were simultaneously detected in both years for plant height and heading date, respectively. Each of the interactions individually accounted for only a very small portion of the phenotypic variation. The majority of the significant interactions involved marker loci that did not detect significant effects by single-locus analyses, and many of the QTLs detected by single-locus analyses were involved in epistatic interactions. The results clearly demonstrated the importance of epistatic interactions in the genetic bases of heading date and plant height. Received: 5 May 2001 / Accepted: 3 August 2001     

Genetic basis of plant height and its degree of indetermination in mungbean (Vigna radiata (L.) Wilczek)

The genetic basis of plant height at various growth stages and the degree of indetermination of plant height in six mungbean genotypes (NM 92, 6601, NM 89, VC 1560D and VC 3902A) were assessed through half diallel cross. Cultivars, 6601 and NM 92, were the best general combiner for pre-flowering dry matter accumulation and minimum increase in plant height from first flower to 90% pods maturity, respectively. For these traits, the combination NM 92 x NM 89 was the best specific combiner of all the crosses. Both additive and dominant gene effects controlled the inheritance of plant height at first pod and to 90% pods maturity, degree of indetermination of plant height (DDh) from first flower to first pod maturity (DDh1), DDh from first flower to 90% pods maturity (DDh2) and DDh from first pod maturity to 90% pods maturity (DDh3). Plant height at first flower was additively inherited. The additive gene action was predominant as compared to dominant gene action for all the traits examined. High narrow and broad sense heritability estimates for DDh2 showed that better response to selection is possible for the development of mungbean genotypes with minimum increase in plant height during post-flowering development.     

Mapping and Isolation of Quantitative Trait Loci Controlling Plant Height and Heading Date in Rice

Quantitative trait loci (QTL) were identified for heading date and plant height in rice ( Oryza sativa L.) using a recombinant inbred line population consisting of 241 lines. Totally 4 QTLs for heading date and 4 QTLs for plant height were detected in three years. The QTL with large effects located in the interval C1023-R1440 on chromosome 7 was simultaneously detected in three years for both traits. In order to distinguished the interval whether contained one QTL with pleiotropy effect or two close linked QTLs, a recombinant line RIL50, whose genetic background was high similar to Zhenshan 97 except the regions covered the major QTL from Minghui 63, was selected to cross with Zhenshan 97. A BC1F2 population from the cross, which could be regarded as near isogenic lines (NIL) with the targeted QTL (QTL-NIL), was used to collect heading date and plant height data. The frequency distribution of the two traits in the BC1F2 population was bimodal, and their segregation ratios were in accordance with the expected Mendelian inheritance ratios. Normally, the short plants flowered early in the population, the high plants with late heading date, but the relationships between the plant height and the heading date of 6 plants conflicted with the case. The above results clearly demonstrated that QTL could be treated as single Mendelian factor. Moreover, there are two close linked genes controlling the heading date and the plant height on chromosome 7, respectively.     

Combining ability according to the traits of stem branching and plant height in linseed lines

The combining ability according to the traits of stem branching and plant height has been studied for ten pure lines of oil flax under the conditions of complete and incomplete diallel crosses. The high heritability of traits, such as plant height, the number of lateral stems and shoots, and the essential role of genes with dominant effects of interaction in genetic control of the traits of stem branching and plant height have been shown. The methods of application of certain genotypes and crossed combinations in flax breeding based on combining-ability indexes were identified. Some new complexes of habitus traits and agriculturally valuable plant characteristics were obtained as a result of individual selection from hybrid combinations.     

家蚕二化性杂交品种部分数量性状遗传参数的初步评估

采用完全随机设计法根据10头老熟幼虫体重、全茧重、茧层量、茧层率（%）、存活率、万蚕茧层量和茧丝长等指标,对两对二化性家蚕Bombyx mori L. 杂交品系（SH6×NB₄D₂和CSR₂×CSR₄）杂交一代的22个子代个体进行了遗传参数估算,以缩小优质蚕品种的候选范围,并且计算出直接筛选的参数,如遗传力和遗传进度等,使这些信息可用于以筛选高产新品种为目的的育种和选择过程中。杂交子代2, 4, 5, 6, 7, 10, 14, 16, 19和20号个体在这几个指标中表现出显著的优越性。全茧重、万蚕茧层量和茧丝长的遗传力和遗传进度较大,可以简单地从表现型的差异对这些性状进行选择并取得遗传性状改良。其他几个指标(10头老熟幼虫体重、茧层量、茧层率(%)和存活率)的遗传力和遗传进度较低,对这些性状进行直接选择来改良品种的效果较差。     

籼粳交组合培矮64S/ 日本晴F2、F3 及F6 代主要农艺性状分析

采用方差分析和相关分析等方法对籼粳交组合培矮64S/日本晴F2、F3及 F6代分蘖数、有效分蘖数和株高等7个主要农艺性状进行了研究。结果表明, 7个农艺性状在双亲之间均存在显著或极显著差异, 亲本在不同年份和不同地点表现出较大差异, 株高表现变异系数较大, 分别为14.4%和22.8%。各性状在3个世代中除了F2分蘖率、F3齐穗期和F6株高, 其余各性状均呈连续变异, 分布频率大致接近正态分布, 同时存在双向超亲分离现象。各性状不同世代相关系数有一定的变化, 但不改变其方向。这些结果可以为水稻数量性状基因座分析提供有价值的信息, 也可为水稻遗传改良提供理论依据; 本文还对选用测序水稻品种为亲本构建群体进行农艺性状研究的意义进行了讨论。     

Prediction of progeny variation in oat from parental genetic relationships

Summary The ability to predict agronomic performance of progeny from a cross would be a great benefit to plant breeders in selecting parents. The predictive value of parental genetic relationships estimating F₁ progeny means and F₄ family variances of nine argronomic traits was tested in 76 oat crosses, using genetic distance measures based on coefficients-of-parentage, quantitatively inherited morphological characters, and discretely inherited biochemical and morphological characters. Coefficients-of-parentage were better predictors of F₁ performance than similarity measures derived from plant morphology or discretely inherited characters. Combined distance measures were better estimators of F₁ specific combining ability (SCA) effects than any single measure. Among cultivars of similar adaptation and quantitative morphology, crosses between parents with high coefficients-of-parentage gave higher SCA effect values than crosses of distantly related parents for grain yield and total biomass. The opposite was found for crosses among cultivars of different adaptation or quantitative morphology. The best predictor of trait variances among F₄ families was coefficients-of-parentage. Crosses between more distantly related parents produced larger variances among families than crosses between closely related parents for plant biomass. For grain yield, test weight, heading date, grain filling period, and maturity date, crosses between more closely related parents produced larger among-family variances than crosses of distantly related parents. Crosses between more distantly related parents involved at least one parent unadapted to central New York, and resulted in most of the progeny being generally unadapted. This, in part, may account for the low genetic variances for heading date, test weight, and grain yield in crosses of distantly related parents.     

Inheritance of height and maturity in crosses between pearl millet landraces and inbred Tift 85DB

Summary Over 300 landraces of pearl millet were collected in Burkina Faso and grown at the Coastal Plain Experiment Station in Tifton/GA. At Tifton, these landraces are predominantly tall and late-maturing. The photoperiod requirements of these landraces hinder evaluation of their performance in the field and their use in breeding programs. A conversion program has been initiated to transfer genes for dwarf stature and early flowering into the tall, late-maturing landraces. The inbred Tift 85DB is being used as a donor of genes for the dwarf and early characteristics, and was crossed to nine randomly selected landraces from Burkina Faso. The parents, F₁, F₂, and backcrosses to each parent were grown in the field and evaluated for plant height at anthesis and time in days from planting to anthesis. In general, plant height of F₁s was taller than the tallest parent, and in all crosses the maturity of F₁s was intermediate between the parents. Numbers of loci conferring height varied among crosses, ranging from 0 to 9.6, and averaged 1.6. Estimated numbers of loci conferring maturity ranged from 0 to 12.8 and averaged 3.4. Broad-sense heritability estimates for height and maturity averaged 60.2 and 65.7%, respectively. Corresponding narrow-sense estimates averaged 23.8 and 48.2%. Joint scaling tests revealed that additive-genetic effects were highly significant for both traits, but dominance and epistatic-genetic effects contributed to the inheritance of each trait in some crosses. The low gene numbers, high heritability estimates, and preponderance of additive-genetic effects suggest that selection for these traits should be effective.     

Egg shell quality in Japanese quail: characteristics,heritabilities and genetic and phenotypic relationships

The objective of the present study was to estimate heritabilities as well as genetic and phenotypic correlations for egg weight, specific gravity, shape index, shell ratio, egg shell strength, egg length, egg width and shell weight in Japanese quail eggs. External egg quality traits were measured on 5864 eggs of 934 female quails from a dam line selected for two generations. Within the Bayesian framework, using Gibbs Sampling algorithm, a multivariate animal model was applied to estimate heritabilities and genetic correlations for external egg quality traits. The heritability estimates for external egg quality traits were moderate to high and ranged from 0.29 to 0.81. The heritability estimates for egg and shell weight of 0.81 and 0.76 were fairly high. The genetic and phenotypic correlations between egg shell strength with specific gravity, shell ratio and shell weight ranging from 0.55 to 0.79 were relatively high. It can be concluded that it is possible to determine egg shell quality using the egg specific gravity values utilizing its high heritability and fairly high positive correlation with most of the egg shell quality traits. As a result, egg specific gravity may be the choice of selection criterion rather than other external egg traits for genetic improvement of egg shell quality in Japanese quails.     

Combining ability for the traits of stem branching and plant height in linseed lines

Combining ability for the traits of stem branching and plant height has been studied in ten pure lines of flax under complete and incomplete diallel crosses. High heritability of the traits "plant height", "the number of lateral stems" and "the number of lateral shoots" and essential role of genes with dominant effects of interaction in genetic control of the traits of stem branching and plant height have been shown. On the basis of combining ability indexes the ways for usage of certain genotypes and crossing combinations in flax breeding were defined. As a result of individual selection from hybrid combinations some new complexes of habit traits and agriculturally valuable plant characteristics were obtained.     

Genetic studies on tissue culture response and some agronomical traits in Egyptian bread wheat

The main effort of wheat breeder is the detection of genes and to merge them in a particular genotype using most suitable combination. Five Egyptian cultivars of bread wheat (Triticum aestivum L.) were crossed in a half diallel mating design to produce 10 crosses. The genetic potential of embryogenic callus (EC%), plant regeneration (RGP%) response and its association with heading date (HD) and grain yield per plant (GY/P) were investigated. The results showed that GY/P was significantly and positively correlated with EC% and RGP%. The combining ability analysis showed that the magnitudes of general combining ability (GCA) were higher than those of specific combining ability (SCA) for both tissue culture response and agronomic traits. The promising crosses which exhibited desirable SCA effects, showed also high useful heterosis for all studied traits. The magnitudes of additive genetic variance (σ²A) were larger than those of non-additive ones (σ²D) for all studied traits except for number of days to heading. The estimates of narrow sense heritability were 84.56%, 82.13%, 43.46% and 70.28% for the percentage of EC%, RGP%, HD and GY/P, respectively. The genetic similarity percents based on RAPD markers ranged from 76% to 93% between the cultivars. The UPGMA cluster analysis revealed that the cultivars could be divided into two main clusters. The range of Euclidean distances based on morphological characters among the cultivars was relatively wide (4.37–27.87), indicating relatively high amount of phenotypic variation. A significant positive correlation between Euclidean distance and RAPD distance (0.72⁷) was found.     

云南红花种质资源主要农艺性状的遗传多样性分析

为加强红花种质资源的研究利用,对筛选出的66份云南红花优异种质资源16个形态性状进行聚类分析与主成分分析。结果表明:云南红花种质资源具有丰富的遗传多样性,多样性指数最高的是果球着粒数,其次是株高、最末分枝高度和千粒重;性状变异系数最大的是分枝总数,其次分别是单株有效果球数和第一分枝高度,最小的为顶果球直径;基于各种质间形态性状的遗传差异,把66份红花种质聚类并划分为6大类群。第Ⅰ类群可作为有增产潜力的亲本材料,第Ⅲ类群可作为高产量目标选育的亲本,第Ⅳ类群可作为大粒型选育亲本,第Ⅴ类群可作为高含油量选育目标亲本,第Ⅵ类群既是大粒型又是高含油量双重选育目标亲本。11个数量性状的主成分分析结果表明,前4个主成分累计贡献率达82.59%,第一主成分反映植株高度,第二主成分反映产量构成因子,第三、第四主成分分别反映千粒重和果球着粒数。研究结果表明云南红花地方种质资源的变异较大,遗传较丰富。     

Genetic parameters in a rubber tree population: heritabilities,genotype-by-environment interactions and multi-trait correlations

Rubber tree breeding programs are mainly driven by selection of individuals with high yield and quality of rubber. Data from 51 open-pollinated progenies tested on six sites in Brazil were analyzed over several traits to estimate the following: genetic parameters such as narrow-sense heritability and additive genetic variance in single- and multi-site analyses, type B correlations to determine the relevance of genotype-by-environment interactions and its effects on alternative selection strategies, additive genetic repeatability correlation for rubber yield based on three consecutive yearly measurements, and type A correlations to evaluate trait-to-trait genetic associations for all measured traits. Average rubber yield (RYm) showed an estimated narrow-sense heritability of 0.31, with an estimated type B correlation of 0.84, indicating low levels of genotype-by-environment interaction. The trait survival and number of latex vessel rings (RG) showed larger genotype-by-environment interaction and the lowest heritabilites. High to moderate type B correlation was found for most traits, with a value of 0.85 between diameter (or girth) and RYm; therefore, it is possible to achieve interesting rubber yield genetic gains (over 3 years of measurements) from indirect selection based on diameter at age 2.     

Prediction of testcross means and variances among F3 progenies of F1 crosses from testcross means and genetic distances of their parents in maize

 Prediction of the means and genetic variances in segregating generations could help to assess the breeding potential of base populations. In this study, we investigated whether the testcross (TC) means and variances of F₃ progenies from F₁ crosses in European maize can be predicted from the TC means of their parents and F₁ crosses and four measures of parental genetic divergence: genetic distance (GD) determined by 194 RFLP or 691 AFLP^{TM 1} markers, mid-parent heterosis (MPH), and absolute difference between the TC means of parents (∣P₁−P₂∣). The experimental materials comprised six sets of crosses; each set consisted of four elite inbreds from the flint or dent germplasm and the six possible F₁ crosses between them, which were evaluated for mid-parent heterosis. Testcross progenies of these materials and 20 random F₃ plants per F₁ cross were produced with a single-cross tester from the opposite heterotic group and evaluated in two environments. The characters studied were plant height, dry matter content and grain yield. The genetic distance between parent lines ranged between 0.17 and 0.70 for RFLPs and between 0.14 and 0.57 for AFLPs in the six sets. Testcross-means of parents, F₁ crosses, and F₃ populations averaged across the six crosses in a particular set generally agreed well for all three traits. Bartlett’s test revealed heterogeneous TC variances among the six crosses in all sets for plant height, in four sets for grain yield and in five sets for dry matter content. Correlations among the TC means of the parents, F₁ crosses, and F₃ populations were highly significant and positive for all traits. Estimates of the TC variance among F₃ progenies for the 36 crosses showed only low correlations with the four measures of parental genetic divergence for all traits. The results demonstrated that for our material, the TC means of the parents or the parental F₁ cross can be used as predictors for the TC means of F₃ populations. However, the prediction of the TC variance remains an unsolved problem. Received: 4 August 1997 / Accepted: 17 November 1997     

Agronomic performance of lines derived from anther culture, maize pollination and single-seed descent in a spring wheat cross

Anther culture and maize hybridization are two frequently used techniques for doubled haploid production in wheat (Triticum aestivum L.). Information on the field performance of lines derived from these techniques is limited. This study was conducted to compare the performance of F_4:6 lines obtained by single-seed descent with lines obtained by anther culture and maize (Zea mays L.) pollination from the same cross of spring wheat, ’Chris’/MN 7529. Thirty-three lines derived from each of those techniques were evaluated in six environments for grain yield, protein content, test weight, heading date, kernel weight and plant height. Mean performance of the single-seed descent lines exceeded performance of the anther culture lines for grain yield, kernel weight and plant height with no apparent differences for grain protein content, test weight and heading date. No differences between trait means for the single-seed descent and maize pollination lines were found except for plant height. The best 5 lines from each method for grain yield, protein content and test weight were similar in performance except that the protein content was higher for the maize pollination lines than for the single-seed descent lines. Acceptable levels of agronomic performance could be found among lines from each method. Wide acceptance of the doubled haploid technique for pure line production in breeding programs may, however, be limited by the often poor efficiency of doubled haploid line production, resulting in smaller population sizes for selection of desirable traits in comparison to the single-seed descent method. Received: 31 July 1998 / Accepted: 28 November 1998