Potassium-controlled synthesis of heterotopic macrocycles based on isothiosemicarbazide

The macrocyclisation reaction of 3,3′-(3,6-dioxaoctane-1,8-diyldioxy)-bis(2-hydroxybenzaldehyde) (1) with S-methylisothiosemicarbazide hydroiodide (H₂NNC(SCH₃)NH₂·HI) in the presence of potassium triflate, followed by addition of M(CH₃COO)₂·nH₂O, where M=Ni, Cu, Zn, afforded [NiLKI₃] (2), [NiLK(CF₃SO₃)] (3), [CuLK(CF₃SO₃)(CH₃OH)] (4) and [(ZnILK)₂CH₃OH] (5), respectively. Compounds 2-5 have been characterised by X-ray crystallography. IR, electronic, mass, ¹H, ¹³C{¹H} and ¹⁹F{¹H} NMR spectra are reported. Magnetic susceptibility measurements and ESR spectra of 4 indicate weak intermolecular spin-spin interactions, which are mostly dipolar in origin.     

Lanthanide(III) coordination polymers from the exo-coordination of Na: Syntheses, structures, luminescence, and decay dynamics

[Na₂[Ln₂(sal)₄(CF₃SO₃)₂(H₂O)₄](CF₃SO₃)₂]_n Ln = Nd (1) and Eu (2) were synthesized from the reaction of salicylaldehyde, lanthanide(III) triflates, and sodium hydroxide. The compounds are iso-structural and possess a 2-D supramolecular network built up from discrete dinuclear Ln(III) units [Ln₂(sal)₄(CF₃SO₃)₂(H₂O)₄] via exo-coordination of Na(CF₃SO₃). The sal ligands display μ₂-O coordination modes involving both the phenolic and carbonyl oxygen atoms while the triflates function as both μ₂ and μ₃ bridges. Each Ln(III) in the network is eight coordinate and in bicapped trigonal prism coordination geometry. Luminescence from [Na₂[Eu₂(sal)₄(CF₃SO₃)₂(H₂O)₄](CF₃SO₃)₂]_n showed temperature dependent sensitized emission with significant quadrupolar contribution and decay dynamical studies followed single exponential kinetics. Together these results indicate that in the presence of Na⁺ ions, sal, and triflate are useful ligands in the construction of Ln(III) coordination polymers with unusual luminescence and structures.     

Synthesis and properties of crown ether isocyanide silver(I) derivatives: X-ray structure of a self-assembled 22-membered diargentacycle

The crown ether isocyanide CNR (R = benzo-15-crown-5) reacts with silver(I) salts in the appropriate molar ratio to give [Ag(CNR)_n]X (n = 1, 2; X = CF₃SO₃, BF₄). X-ray diffraction studies of [Ag(CF₃SO₃)(CNR)] show the molecules associated in a dinuclear manner with an antiparallel orientation. The silver centers are tetracoordinated to the isocyanide and to three oxygens, one from the triflate anion and two from the second crown ether in the dimer. The molecular structure displays five cycles: the two 15-crown ether rings, two five-membered argentacycles and a 22-membered diargentacycle. The crown ether in these complexes is able to detect alkaline cations from M(CF₃SO₃) (M = Li, Na, K) by NMR in d₆-acetone solutions, and to distinguish Li⁺-Na⁺ from K⁺.     

Caissarolysin I (Bcs I), a new hemolytic toxin from the Brazilian sea anemone Bunodosoma caissarum: Purification and biological characterization

Two cationic proteins, C1 and C3, were purified to homogeneity from the hemolytic fraction of the venom of Bunodosoma caissarum sea anemone. The purification processes employed gel filtration followed by ion exchange chromatography, being the purity and molecular mass confirmed by SDS-PAGE and mass spectrometry. Protein C1 represented the second major peak of the hemolytic fraction and was previously believed to be a cytolysin belonging to a new class of hemolysins. The C1 protein has a molecular mass of 15495 Da and was assayed for hemolysis, PLA₂ activity and acute toxicity in crabs and mice, showing no activity in these assays. It has an amino terminal with no similarity to all known hemolysins and, therefore, should not be considered a toxin, being its function completely unknown. The protein C3 (19757 Da), that also lacks PLA₂ activity, was recognized by antiserum against Eqt II and presented high hemolytic activity to human erythrocytes (ED₅₀ of 0.270 μg/ml), being named Caissarolysin I (Bcs I). Its activity was inhibited by pre-incubation with sphingomyelin (SM) and also when in presence of erythrocytes pre-treated with the SMase P2, a phospholipase D from the brown spider Loxosceles intermedia, indicating that SM is the main target of Bcs I. Caissarolysin I is the first hemolysin purified from a sea anemone belonging to the genus Bunodosoma and belongs to the Actinoporin family of sea anemone hemolysins.     

Ligand induced PH bond formation and a comparison of the reactivity of two isomers of the carbonyl hydride [Pt2(μ-PBu2)2(H)(CO)(PBu2H)]CF3SO3

The Pt₂ ^(II) isomeric terminal hydrides [(CO)(H)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)]CF₃SO₃ (1a), and [(CO)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)(H)]CF₃SO₃ (1b), react rapidly with 1 atm of carbon monoxide to give the same mixture of two isomers of the Pt₂ ^(I) dicarbonyl [Pt₂(μ-PBu^t ₂)(CO)₂(PBu^t ₂H)₂]CF₃SO₃ (3-Pt); the solid state structure of the isomer bearing the carbonyl ligands pseudo-trans to the bridging phosphide was solved by X-ray diffraction. A remarkable difference was instead found between the reactivity of 1a and 1b towards carbon disulfide or isoprene. In both cases 1b reacts slowly to afford [Pt₂(μ-PBu^t ₂)(μ,η²,η²-CS₂)(PBu^t ₂H)₂]CF₃SO₃ (4-Pt), and [Pt₂(μ-PBu^t ₂)(μ,η²,η²-isoprene) (PBu^t ₂H)₂]CF₃SO₃ (6-Pt), respectively. In the same experimental conditions, 1a is totally inert. A common mechanism, proceeding through the preassociation of the incoming ligand followed by the PH bond formation between one of the bridging P atoms and the hydride ligand, has been suggested for these reactions.     

Dinuclear organoiridium(III) mono- and bis-intercalators with rigid bridging ligands: Synthesis, cytotoxicity and DNA binding

The DNA binding and in vitro cytotoxicity of the dinuclear Ir(III) polypyridyl complexes [{(η⁵-C₅Me₅)Ir(dppz)}₂(μ-pyz)](CF₃SO₃)₄1 and [{(η⁵-C₅Me₅)Ir(pp)}₂(μ-4,4′-bpy)](CF₃SO₃)₄2-4 (pp = dipyrido[3,2-d:2′,3′-f]quinoxaline (dpq), dipyrido[2,3-a:2′,3′-c]phenazine (dppz), benzo[i]dipyrido[3,2-a:2′,3′-c]phenazine (dppn)) with the rigid bridging ligands pyrazine (pyz) or 4,4′-bipyridine (4,4′-bpy) have been studied. Stable intercalative binding into CT DNA (calf thymus DNA) is indicated for the dppz complexes 1 and 3 by induced negative CD bands at about 300 nm and large viscosity increases, with the individual measurements being in accordance with intrastrand bis-intercalation for 3 and mono-intercalation for 1. The observed interruption of specific interresidue NOE cross peaks from the relevant nucleobase H6/H8 protons to the sugar H2′/H2″ protons of the preceding nucleotide is in accordance with bis-intercalation of complex 3 between the C3G18 and G4C17 base pairs and the T5A16 and A6T15 base pairs of the decanucleotide d(5′-CGCGTAGGCC-3′). Complexes 1 and 3 exhibit a greatly improved uptake by HT-29 (colon carcinoma) cells and significantly improved in vitro IC₅₀ values of 1.8 ± 0.1 and 3.8 ± 0.1 μM towards this cell line in comparison to the mononuclear complex [(η⁵-C₅Me₅)IrCl(dppz)](CF₃SO₃) (IC₅₀ = 7.4 ± 0.9 μM).     

Properties of an ionic liquid-tolerant <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic">amyloliquefaciens</Emphasis> CMW1 and its extracellular protease

An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF₃SO₃) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF₃SO₃). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF₃SO₃, [BMIM]Cl, [BMIM]CF₃SO₃, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0–12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.     

Characteristics of Lignin Extracted from Different Lignocellulosic Materials via Organosolv Fractionation

Among biomass-derived compounds, lignin is an underused component with potential for conversion to industrial-needed products in biorefinery. In this study, organosolv fractionation of four lignocellulosic materials including bagasse (BG), pararubber wood sawdust (PS), palm fiber (PF), and cassava fiber (CF) was studied using a ternary solvent mixture comprising methyl isobutyl ketone (MIBK), ethanol, and water in the presence of H₂SO₄ to separate high-purity lignin. The fractionation reaction was performed at 160 °C for 40 min with MIBK/ethanol/water proportion of 0.25/0.42/0.33 and 0.025 M of H₂SO₄, which led to the highest lignin removal efficiency of 88.2, 70.6, 67.3, and 71.7% (w/w) from BG, PS, PF, and CF, respectively. Physicochemical characteristics of the fractionated lignin were determined for Klason lignin and by X-ray fluorescence spectroscopy, organic elemental analysis, ¹H nuclear magnetic resonance spectroscopy, and Fourier transform infrared spectroscopy. The lignin samples were thermally depolymerized in MIBK to determine the content of specific lignin-derived chemicals. The main phenolic derivatives from BG-lignin were 4-ethylphenol and 4-vinylguaiacol, whereas those from PS-lignin were syringaldehyde and cis-isoeugenol. Phenol and bis(2-ethylhexyl) phthalate were mainly produced from depolymerization of PF-lignin while trans-isoeugenol and hexadecanoic acid were the major products from CF-lignin. This work demonstrates the potential of the fractionated lignin for production of valuable chemicals in biorefineries.     

Characterization of lignin-rich residues remaining after continuous super-critical water hydrolysis of poplar wood (Populus albaglandulosa) for conversion to fermentable sugars

Poplar wood flour (Populous albaglandulosa) was treated with sub- and super-critical water (subcritical: 325, 350 °C; super-critical: 380, 400, 425 °C) for 60 s at 220 ± 10 atm. Hydrochloric acid (0.05% v/v) was added to samples as acidic catalyst. The final products were separated into water soluble fraction and undegraded solids. The yields of undegraded solids were thoroughly dependent on temperature severity and mainly composed of lignin fragments. Average molecular weights of the lignins were between 1500 and 4400 Da, which was only 1/3-1/8-fold of poplar milled wood lignin (13,250 Da). DFRC (Derivatization Followed by Reductive Cleavage) analysis revealed that C6C3 phenols (coniferyl and sinapyl alcohol) were rarely detected in the lignins, indicating occurrence of two probable lignin reactions during SCW hydrolysis: lignin fragmentation via splitting of β-O-4 linkage and loss of propane side chains. These results were also confirmed by ¹H and ¹³C NMR spectroscopic analysis.     

Comparison of the pyrolysis behavior of lignins from different tree species

Despite the increasing importance of biomass pyrolysis, little is known about the pyrolysis behavior of lignin—one of the main components of biomass—due to its structural complexity and the difficulty in its isolation. In the present study, we extracted lignins from Manchurian ash (Fraxinus mandschurica) and Mongolian Scots pine (Pinus sylvestris var. mongolica) using the Bjorkman procedure, which has little effect on the structure of lignin. Fourier transform infrared (FTIR) spectrometry was used to characterize the microstructure of the Bjorkman lignins, i.e., milled wood lignins (MWLs), from the different tree species. The pyrolysis characteristics of MWLs were investigated using a thermogravimetric analyzer, and the release of the main volatile and gaseous products of pyrolysis were detected by FTIR spectroscopy. During the pyrolysis process, MWLs underwent thermo-degradation over a wide temperature range. Manchurian ash MWL showed a much higher thermal degradation rate than Mongolian Scots pine MWL in the temperature range from 290–430 °C. High residue yields were achieved at 37 wt.% for Mongolian Scots pine MWL and 26 wt.% for Manchurian ash MWL. In order to further investigate the mechanisms of lignin pyrolysis, we also analyzed the FTIR profiles for the main pyrolysis products (CO₂, CO, methane, methanol, phenols and formaldehyde) and investigated the variation in pyrolysis products between the different MWLs.     

Alternative syntheses and reactivity of platinum(II) terpyridyl acetonitrile complexes

New direct syntheses of [Pt(trpy)(NCCH₃)](CF₃SO₃)₂2 (where trpy = 2,2′:6′,2′′-terpyridine) and [Pt(tBu₃-trpy)(NCCH₃)](CF₃SO₃)₂3 (where tBu₃-trpy = 4,4′,4″-tri-tert-butyl-2,2′:6′,2″-terpyridine) via the displacement of acetonitrile from [Pt(NCCH₃)₄](CF₃SO₃)₂ have been developed. The synthetic utility of 2 was investigated in reactions with triphenylphosphine (PPh₃), 2,6-dimethylphenyl isocyanide (CN-Xyl), 2,5-dimethyl-2,5-diisocyanohexane (TM4), and tert-butyl isocyanide (CN-tBu). Whereas the expected substitution products were observed for reactions with PPh₃, CN-Xyl, and CN-tBu, dealkylation of TM4 occurred to afford [Pt(trpy)(CN)](CF₃SO₃) 6. The structures of [Pt(trpy)L]²⁺ dications show little intermolecular interactions in the solid state, with the exception of the tBu₃-trpy complex 3 which exists as head-to-tail dimers with a Pt-Pt distance of 3.29 Å. The cyano product 6 was found to stack in infinite chains of cations with a Pt-Pt distance of 3.45 Å.     

Unveiling the Structural Heterogeneity of Bamboo Lignin by In Situ HSQC NMR Technique

One of the primary challenges for efficient utilization of lignocellulosic biomass is to clarify the complicated structure of lignin. In this study, in situ heteronuclear single quantum coherence nuclear magnetic resonance (NMR) characterization of the structural heterogeneity of lignin polymers during successively treated bamboo was emphatically performed without componential separation. Specially, the NMR spectra were successfully obtained by dissolving the acetylated and non-acetylated bamboo samples in appropriate deuterated solvent (CDCl₃ and DMSO-d ₆). The heterogeneous lignin polymers in bamboo samples were demonstrated to be HGS-type and partially acylated at the ??-carbon of the side chain by p-coumarate and acetate groups. The major lignin linkages (?¨CO?C4, ?¨C??, and ?¨C5, etc.) and various lignin?Ccarbohydrate complex linkages (benzyl ether and phenyl glycoside linkages) can be assigned, and the frequencies of the major lignin linkages were quantitatively obtained. In particular, the residual enzyme lignin (REL) contained a higher amount of syringyl units and less condensed units as compared to other samples. Inspiringly, the method gives us a vision to track the structural changes of plant cell wall (e.g., lignin polymers) during the different pretreatments.     

Synthesis and biological evaluation of platinum–acridine hybrid agents modified with bipyridine non-leaving groups

The use of 2,2′-bipyridines (4,4′-R₂-2,2′-bpy; R = H, Me, OMe, CF₃) as non-leaving groups (L–L) in platinum–acridinylthiourea conjugates, [PtCl(L-L)(ACRAMTU)](NO₃)₂, has been investigated. All bpy-substituted complexes (2–5) show micromolar activity in HL-60 (leukemia) and H460 (lung) cancer cell lines but proved to be significantly less potent than the prototypical compound (1) containing aliphatic ethane-1,2-diamine. NMR and mass spectrometry data indicate that bpy accelerates the reaction of platinum with DNA nitrogen, but the resulting adducts are more labile than those formed by the prototype.     

Rhodium(I) and palladium(II) complexes with the Schiff base 2,2-bis((4S)-4-benzyl-2-oxazoline)

The Schiff base 2,2^′-bis((4S)-4-benzyl-2-oxazoline) (I) and its coordination complexes with rhodium(I) and palladium(II) (and with 1,5-cyclo-octadiene and allyl ligands) have been characterised by single-crystal X-ray diffraction, mass spectrometry, ¹³C and ¹H NMR spectroscopy: [Rh(C₂₀H₂₀N₂O₂)(C₈H₁₂)][Rh₂(C₂₀H₂₀N₂O₂)₂](CF₃SO₃)₃ · (CH₃CH₂O) (II) and [Pd(C₂₀H₂₀N₂O₂)(C₃H₅)]CF₃SO₃ (III). We discuss the reasons for the formation of two complex cations for Rh(I), [Rh(C₂₀H₂₀N₂O₂)(C₈H₁₂)]⁺ (IIa) and [Rh₂(C₂₀H₂₀N₂O₂)₂]²⁺ (IIb), and only one for Pd(II).     

Heterobimetallic platinum(II)-palladium(II) complexes bridged by fluorobenzenethiolates. Structure and equilibria

Synthesis of the heterobimetallic platinum(II)-palladium(II) complexes with poly fluorinated benzenethiolates as intermetallic bridges, [(dppe)Pd(μ-SR_F)₂Pt(dppe)](SO₃CF₃)₂ with SR_F = p-SC₆F₄(CF₃) (1), SC₆F₅ (2), p-SC₆HF₄ (3) and o-SC₆H₄(CF₃) (4), have been accomplished either by a redistribution reaction in mixtures of the homonuclear bimetallic species, [(dppe)Pd(μ-SR_F)₂Pd(dppe)]²⁺/[(dppe)Pt(μ-SR_F)₂Pt(dppe)]²⁺ or by assembling the monometallic building blocks [(dppe)M(μ-SR_F)₂]/[(dppe)M′(solvent)₂]²⁺, M, M′ = Pd or Pt. Both experimental systems reach an equilibrium state which is independent of the temperature within the probed range, −90 °C to +50 °C. A single crystal of the heterobimetallic compound [(dppe)Pd(μ-SC₆F₅)₂Pt(dppe)](SO₃CF₃)₂(acetone)₂ (2) was isolated and analyzed by X-ray diffraction. Comparison with the corresponding structures exhibited by the homobimetallic analogous, [Pd₂(μ-SC₆F₅)₂(dppe)₂](SO₃CF₃)₂(acetone)₂ (5) and [Pt₂(μ-SC₆F₅)₂(dppe)₂](SO₃CF₃)₂(acetone)₂ (6) shows that all three structures are isostructural in space group . All three compounds exhibit a centrosymmetric planar [M₂(μ-S)₂] ring in which the sulfur substituents are arranged in an anti configuration.     

Cp*Ru complexes of benzylideneaniline and salicylideneaniline

The reaction product of Cp*Ru(CH₃CN)₃ ⁺ OSO₂CF₃ ⁻ with salicylaldehyde yielded (1) which reacted with a series of aniline derivatives to produce air-stable solids. These products were characterized by ¹H and ¹³C NMR spectrometry and UV-Vis spectroscopy. Solvatochromism studies of these products revealed that the p-NH₂ and p-N(CH₃)₂ derivatives exhibit relatively large values of molecular hyperpolarizability and have the potential to exhibit nonlinear optical properties. These derivatives were further studied by electrochemical investigations.     

Chemosynthetic homologues of Mycoplasma pneumoniae β-glycolipid antigens for the diagnosis of mycoplasma infectious diseases

Mycoplasma pneumoniae expresses β-glycolipids (β-GGLs) in cytoplasmic membranes, which possess a unique β(1?→?6)-linked disaccharide epitope, which has high potential in biochemical and medicinal applications. In the present study, a series of β-GGLs homologues with different acyl chains (C12, C14, C16, and C18) were prepared from a common precursor. An ELISA assay using an anti-(β-GGLs) monoclonal antibody indicated that the synthetic homologues with long acyl chains had greater diagnostic potential in the order C18?>?C16?>?C14?>?C12. Toward a simultaneous detection of natural glycolipids by mass spectrometry (MS), a deuterium-labeled C16 homologue (β-GGL-C16-d₃) was prepared and applied as an internal standard for a high-resolution electrospray ionization MS (ESI-MS) analysis. The ESI-MS analysis was used to identify and quantify acyl homologues (C16/C16, C16/C18, and C18/C18) of β-GGL-C16 in cultured M. pneumoniae. A β-GGLs homologue with a 1,2-diacetyl group (C2) was also prepared as a “water soluble” glycolipid homologue and characterized by ¹H NMR spectroscopy. We envisage that each of these chemosynthetic homologues will provide promising approaches to solve medical and biological problems associated with mycoplasma infectious diseases (MIDs).     

New ruthenium(II) precursors with the tetradentate sulfur macrocycles tetrathiacyclododecane ([12]aneS4) and tetrathiacyclohexadecane ([16]aneS4) for the construction of metal-mediated supramolecular assemblies

The preparation and structural characterization of several new Ru(II) complexes in which four coordination positions are occupied by the sulfur atoms of a macrocycle, either 1,4,7,10-tetrathiacyclododecane ([12]aneS4) or 1,5,9,13-tetrathiacyclohexadecane ([16]aneS4), and the two others by relatively labile ligands (Cl⁻, , H₂O, dmso-S), are described:cis-[Ru([12]aneS4)(dmso-S)(H₂O)](CF₃SO₃)₂ (2a), cis-[Ru([12]aneS4)(dmso-S)(ONO₂)](NO₃) (2b), cis-[Ru([16]aneS4)Cl₂] (4), and trans-[Ru([16]aneS4)(dmso-S)(H₂O)](CF₃SO₃)₂ (5).The complexes of the larger [16]aneS4 macrocycle have a flexible coordination geometry, either cis or trans, that makes them unsuited for being used as precursors in metal-driven self-assembly processes.On the contrary, the [12]aneS4 complexes cis-[Ru([12]aneS4)(dmso-S)Cl]Cl (1) and, above all, its chlorido free derivatives cis-[Ru([12]aneS4)(dmso-S)(H₂O)](CF₃SO₃)₂ (2a) and cis-[Ru([12]aneS4)(dmso-S)(ONO₂)](NO₃) (2b) are potential precursors of the geometrically stable 90° bis-acceptor fragment cis-[Ru([12]aneS4)]²⁺.Preliminary results of their reactivity towards the linear linker pyrazine (pyz) showed that the nature of the isolated product depends on that of the counter-anion.When treated with pyz 2b afforded the dinuclear complex [{Ru([12]aneS4)(ONO₂)}₂(μ-pyz)](NO₃)₂ (8), while 2a gave the molecular triangle [{cis-Ru([12]aneS4)(μ-pyz)}₃](CF₃SO₃)₆ (9), both in low yields.The X-ray structures of compounds 2a, 2b, 4, 5, [{Ru([12]aneS4)Cl}₂(μ-pyz)]Cl₂ (7), 9, and of the sandwich complex[Ru([12]aneS3-S)₂](CF₃SO₃)₂ (3), in which only three sulfur atoms of each macrocycle are bound to ruthenium, are also described.     

Allelic isoforms of the chicken and duck histone H1.a

Two isoforms of the erythrocyte histone H1.a were identified in two conservative flocks of Rhode Island Red chickens and six conservative flocks of ducks. The H1.a1 and H1.a2 isoforms formed three phenotypes (a1, a2 and a1a2) and were electrophoretically similar in the two species. The frequency of phenotype and histone H1.a allele occurrence varied within the genetic groups of birds, but the relatively rare allele a ² was only detected in chicken and duck strains with colored feathers. Using mass spectrometry, we established that the difference between the measured masses of the duck H1.a isoforms was 156 Da. Since this value corresponds to the mass of the arginine residue alone or to the combined mass of the valine and glycine residues, we believe that the polymorphism of duck histone H1.a might have originated from sequence variation. A mass difference of 1 Da observed between chicken H1.a isoforms corresponded well to the previously detected Glu/Lys substitution (0.9414 Da) at position 117.     

Synthesis and structural characterization of the adducts of silver(I) perchlorate and nitrate with triphenylphosphine and bis(pyrazolyl)methane ligands of 1:1:1 stoichiometry

Six new adducts of the form AgX:PPh₃:H₂C(pz^x)₂ (1:1:1) (H₂C(pz^x)₂ = H₂C(pz)₂ = bis(pyrazolyl)methane or H₂C(pz^Me2)₂ = bis(3,5-dimethylpyrazolyl)methane; X = ClO₄, NO₃, SO₃CF₃) have been synthesized and characterized by analytical, spectroscopic (IR, far-IR, ¹H and ³¹P NMR) and two of them also by single crystal X-ray diffraction studies for comparison with counterpart adducts with 2,2′-bipyridyl (‘bpy’) derivatives reported in a previous paper, the bpy-derived ligands forming five-membered chelate rings, while the present H₂C(pz^x)₂ should, potentially, form six-membered rings. Such is the case, the two adducts exhibiting quasi-planar N₂AgP coordination environments, perturbed by the approach of the oxyanion, unidentate in the case of the perchlorate but, in the case of the nitrate, an interesting disordered aggregate of differing unidentate modes.