快速展示糖苷水解酶活性架构单点突变导致结合力变化的电泳技术

酶分子在长期进化过程中形成一系列氨基酸残基组成的活性架构,参与底物的识别、结合与催化过程,而活性架构中相应氨基酸残基是如何影响酶分子结合底物的能力,进而影响酶分子的催化效率,一直是酶分子理性改造研究的热点.利用亲和电泳技术,可以快速展示内切纤维素酶Tr Cel12A和木聚糖酶Tl Xyn A活性架构中不同突变体的催化活性及其迁移率的变化,进而通过在不同底物浓度凝胶中蛋白质相对迁移率变化程度的定量回归分析,发现由氨基酸单点突变导致蛋白质迁移率的相对变化,可以定量表征酶分子突变前后结合底物能力的变化.亲和电泳测定的有效阻滞常数Kb值与等温滴定量热法和荧光光谱法测定的相关参数比较具有明显相关性.由于亲和电泳技术在测定酶分子与底物的结合能力时具有简便、快速、灵敏的特点,因而可作为常规生化实验室常规普筛技术来检测突变文库中系列突变体导致结合力的变化.     

Predicting Ligand Binding Affinity with Alchemical Free Energy Methods in a Polar Model Binding Site

We present a combined experimental and modeling study of organic ligand molecules binding to a slightly polar engineered cavity site in T4 lysozyme (L99A/M102Q). For modeling, we computed alchemical absolute binding free energies. These were blind tests performed prospectively on 13 diverse, previously untested candidate ligand molecules. We predicted that eight compounds would bind to the cavity and five would not; 11 of 13 predictions were correct at this level. The RMS error to the measurable absolute binding energies was 1.8 kcal/mol. In addition, we computed “relative” binding free energies for six phenol derivatives starting from two known ligands: phenol and catechol. The average RMS error in the relative free energy prediction was 2.5 kcal/mol (phenol) and 1.1 kcal/mol (catechol). To understand these results at atomic resolution, we obtained x-ray co-complex structures for nine of the diverse ligands and for all six phenol analogs. The average RMSD of the predicted pose to the experiment was 2.0 Å (diverse set), 1.8 Å (phenol-derived predictions), and 1.2 Å (catechol-derived predictions). We found that predicting accurate affinities and rank-orderings required near-native starting orientations of the ligand in the binding site. Unanticipated binding modes, multiple ligand binding, and protein conformational change all proved challenging for the free energy methods. We believe that these results can help guide future improvements in physics-based absolute binding free energy methods.     

Structural and binding studies of the three-metal center in two mycobacterial PPM Ser/Thr protein phosphatases

Phospho-Ser/Thr protein phosphatases (PPs) are dinuclear metalloenzymes classed into two large families, PPP and PPM, on the basis of sequence similarity and metal ion dependence. The archetype of the PPM family is the α isoform of human PP2C (PP2Cα), which folds into an α/β domain similar to those of PPP enzymes. The recent structural studies of three bacterial PPM phosphatases, Mycobacterium tuberculosis MtPstP, Mycobacterium smegmatis MspP, and Streptococcus agalactiae STP, confirmed the conservation of the overall fold and dinuclear metal center in the family, but surprisingly revealed the presence of a third conserved metal-binding site in the active site. To gain insight into the roles of the three-metal center in bacterial enzymes, we report structural and metal-binding studies of MtPstP and MspP. The structure of MtPstP in a new trigonal crystal form revealed a fully active enzyme with the canonical dinuclear metal center but without the third metal ion bound to the catalytic site. The absence of metal correlates with a partially unstructured flap segment, indicating that the third manganese ion contributes to reposition the flap, but is dispensable for catalysis. Studies of metal binding to MspP using isothermal titration calorimetry revealed that the three Mn²⁺-binding sites display distinct affinities, with dissociation constants in the nano- and micromolar range for the two catalytic metal ions and a significantly lower affinity for the third metal-binding site. In agreement, the structure of inactive MspP at acidic pH was determined at atomic resolution and shown to lack the third metal ion in the active site. Structural comparisons of all bacterial phosphatases revealed positional variations in the third metal-binding site that are correlated with the presence of bound substrate and the conformation of the flap segment, supporting a role of this metal ion in assisting enzyme-substrate interactions.     

Predicting absolute ligand binding free energies to a simple model site

A central challenge in structure-based ligand design is the accurate prediction of binding free energies. Here we apply alchemical free energy calculations in explicit solvent to predict ligand binding in a model cavity in T4 lysozyme. Even in this simple site, there are challenges. We made systematic improvements, beginning with single poses from docking, then including multiple poses, additional protein conformational changes, and using an improved charge model. Computed absolute binding free energies had an RMS error of 1.9 kcal/mol relative to previously determined experimental values. In blind prospective tests, the methods correctly discriminated between several true ligands and decoys in a set of putative binders identified by docking. In these prospective tests, the RMS error in predicted binding free energies relative to those subsequently determined experimentally was only 0.6 kcal/mol. X-ray crystal structures of the new ligands bound in the cavity corresponded closely to predictions from the free energy calculations, but sometimes differed from those predicted by docking. Finally, we examined the impact of holding the protein rigid, as in docking, with a view to learning how approximations made in docking affect accuracy and how they may be improved.     

Thermodynamics of DNA binding and distortion by the hyperthermophile chromatin protein Sac7d

Sac7d is a hyperthermophile chromatin protein which binds non-specifically to the minor groove of duplex DNA and induces a sharp kink of 66 degrees with intercalation of valine and methionine side-chains. We have utilized the thermal stability of Sac7d and the lack of sequence specificity to define the thermodynamics of DNA binding over a wide temperature range. The binding affinity for poly(dGdC) was moderate at 25 degrees C (Ka = 3.5(+/-1.6) x 10(6) M(-1)) and increased by nearly an order of magnitude from 10 degrees C to 80 degrees C. The enthalpy of binding was unfavorable at 25 degrees C, and decreased linearly from 5 degrees C to 60 degrees C. A positive binding heat at 25 degrees C is attributed in part to the energy of distorting DNA, and ensures that the temperature of maximal binding affinity (75.1+/-5.6 degrees C) is near the growth temperature of Sulfolobus acidocaldarius. Truncation of the two intercalating residues to alanine led to a decreased ability to bend and unwind DNA at 25 degrees C with a small decrease in binding affinity. The energy gained from intercalation is slightly greater than the free energy penalty of bending duplex DNA. Surprisingly, reduced distortion from the double alanine substitution did not lead to a significant decrease in the heat of binding at 25 degrees C. In addition, an anomalous positive DeltaCp of binding was observed for the double alanine mutant protein which could not be explained by the change in polar and apolar accessible surface areas. Both the larger than expected binding enthalpy and the positive heat capacity can be explained by a temperature dependent structural transition in the protein-DNA complex with a Tm of 15-20 degrees C and a DeltaH of 15 kcal/mol. Data are discussed which indicate that the endothermic transition in the complex is consistent with DNA distortion.     

Thermodynamic penalty arising from burial of a ligand polar group within a hydrophobic pocket of a protein receptor

Here, we examine the thermodynamic penalty arising from burial of a polar group in a hydrophobic pocket that forms part of the binding-site of the major urinary protein (MUP-I). X-ray crystal structures of the complexes of octanol, nonanol and 1,8 octan-diol indicate that these ligands bind with similar orientations in the binding pocket. Each complex is characterised by a bridging water molecule between the hydroxyl group of Tyr120 and the hydroxyl group of each ligand. The additional hydroxyl group of 1,8 octan-diol is thereby forced to reside in a hydrophobic pocket, and isothermal titration calorimetry experiments indicate that this is accompanied by a standard free energy penalty of +21 kJ/mol with respect to octanol and +18 kJ/mol with respect to nonanol. Consideration of the solvation thermodynamics of each ligand enables the "intrinsic" (solute-solute) interaction energy to be determined, which indicates a favourable enthalpic component and an entropic component that is small or zero. These data indicate that the thermodynamic penalty to binding derived from the unfavourable desolvation of 1,8 octan-diol is partially offset by a favourable intrinsic contribution. Quantum chemical calculations suggest that this latter contribution derives from favourable solute-solute dispersion interactions.     

Multithermal titration calorimetry: a rapid method to determine binding heat capacities

Herein a new method that allows binding DeltaCp to be determined with a single experiment is presented. Multithermal titration calorimetry (MTC) is a simple extension of isothermal titration calorimetry (ITC) that explicitly takes into account the thermal dependences of DeltaH and the binding constant. Experimentally, this is accomplished by performing a single stepwise titration with ITC equipment, allowing temperature re-adjustments of the system at intermediate states of the titration process. Thus, from the resulting multitherm, DeltaCp can also be determined. The experimental feasibility of MTC was tested by using the well-characterized lysozyme-chitotriose complex as a model system.     

Isothermal titration calorimetric procedure to determine protein-metal ion binding parameters in the presence of excess metal ion or chelator

Determination of binding parameters for metal ion binding to proteins usually requires preceding steps to remove protein-bound metal ions. Removal of bound metal ions from protein is often associated with decreased stability and inactivation. We present two simple isothermal titration calorimetric procedures that eliminate separate metal ion removal steps and directly monitor the exchange of metal ions between buffer, protein, and chelator. The concept is to add either excess chelator or metal ion to the protein under investigation and subsequently titrate with metal ion or chelator, respectively. It is thereby possible in the same experimental trial to obtain both chelator-metal ion and protein-metal ion binding parameters due to the different thermodynamic "fingerprints" of chelator and protein. The binding models and regression routines necessary to analyze the corresponding binding isotherms have been constructed. Verifications of the models have been done by titrations of mixtures of calcium chelators (BAPTA, HEDTA, and EGTA) and calcium ions and they were both able to account satisfactorily for the observed binding isotherms. Therefore, it was possible to determine stoichiometric and thermodynamic binding parameters. In addition, the concept has been tested on a recombinant alpha-amylase from Bacillus halmapalus where it proved to be a consistent procedure to obtain calcium binding parameters.     

Probing the sensory rhodopsin II binding domain of its cognate transducer by calorimetry and electrophysiology

Sensory rhodopsin II, a repellent phototaxis receptor from Natronobacterium pharaonis (NpSRII) forms a tight complex with its cognate transducer (NpHtrII). Light excitation of the receptor triggers conformational changes in both proteins, thereby activating the cellular two-component signalling cascade. In membranes, the two proteins form a 2:2 complex, which dissociates to a 1:1 heterodimer in micelles. Complexed to the transducer sensory rhodopsin II is no longer capable of light-driven proton pumping. In order to elucidate the dimerisation and the size of the receptor-binding domain of the transducer, isothermal titration calorimetry and electrophysiological experiments have been carried out. It is shown, that an N-terminal sequence of 114 amino acid residues is sufficient for tight binding (K(d)=240nM; DeltaH=-17.6kJmol(-1)) and for inhibiting the proton transfer. These data and results obtained from selected site-directed mutants indicate a synergistic interplay of transducer transmembrane domain (1-82) and cytoplasmic peptide (83-114) leading to an optimal and specific interaction between receptor and transducer.     

More than a Simple Lipophilic Contact: A Detailed Thermodynamic Analysis of Nonbasic Residues in the S1 Pocket of Thrombin

The field of medicinal chemistry aims to design and optimize small molecule leads into drug candidates that may positively interfere with pathological disease situations in humans or combat the growth of infective pathogens. From the plethora of crystal structures of protein-inhibitor complexes we have learned how molecules recognize each other geometrically, but we still have rather superficial understanding of why they bind to each other. This contribution surveys a series of 26 thrombin inhibitors with small systematic structural differences to elucidate the rationale for their widely deviating binding affinity from 185 μM to 4 nM as recorded by enzyme kinetic measurements. Five well-resolved (resolution 2.30 - 1.47 Å) crystal structures of thrombin-inhibitor complexes and an apo-structure of the uncomplexed enzyme (1.50 Å) are correlated with thermodynamic data recorded by isothermal titration calorimetry with 12 selected inhibitors from the series. Taking solubility data into account, the variation in physicochemical properties allows conclusions to be reached about the relative importance of the enthalpic binding features as well as to estimate the importance of the parameters more difficult to capture, such as residual ligand entropy and desolvation properties. The collected data reveal a comprehensive picture of the thermodynamic signature that explains the so far poorly understood attractive force experienced by m-chloro-benzylamides to thrombin.     

Binding Kinetics of Histone Chaperone Chz1 and Variant Histone H2A.Z-H2B by Relaxation Dispersion NMR Spectroscopy

The genome of eukaryotic cells is packed into a compact structure called chromatin that consists of DNA as well as histone and non-histone proteins. Histone chaperones associate with histone proteins and play important roles in the assembly of chromatin structure and transport of histones in the cell. The recently discovered histone chaperone Chz1 associates with the variant histone H2A.Z of budding yeast and plays a critical role in the exchange of the canonical histone pair H2A-H2B for the variant H2A.Z-H2B. Here, we present an NMR approach that provides accurate estimates for the rates of association and dissociation of Chz1 and H2A.Z-H2B. The methodology exploits the fact that in a 1:1 mixture of Chz1 and H2A.Z-H2B, the small amounts of unbound proteins that are invisible in spectra produce line broadening of signals from the complex that can be quantified in terms of the thermodynamics and kinetics of the exchange process. The dissociation rate constant measured, 22 ± 2 s^− 1, provides an upper bound for the rate of transfer of H2A.Z-H2B to the chromatin remodeling complex, and the faster-than-diffusion association rate, 10⁸ ± 10⁷ M^− 1 s^− 1, establishes the importance of attractive electrostatic interactions that form the chaperone-histone complex.     

Kinetics and energetics of ligand binding determined by microcalorimetry: insights into active site mobility in a psychrophilic alpha-amylase

A new microcalorimetric method for recording the kinetic parameters k(cat), K(m) and K(i) of alpha-amylases using polysaccharides and oligosaccharides as substrates is described. This method is based on the heat released by glycosidic bond hydrolysis. The method has been developed to study the active site properties of the cold-active alpha-amylase produced by an Antarctic psychrophilic bacterium in comparison with its closest structural homolog from pig pancreas. It is shown that the psychrophilic alpha-amylase is more active on large macromolecular substrates and that the higher rate constants k(cat) are gained at the expense of a lower affinity for the substrate. The active site is able to accommodate larger inhibitory complexes, resulting in a mixed-type inhibition of starch hydrolysis by maltose. A method for recording the binding enthalpies by isothermal titration calorimetry in a low-affinity system has been developed, allowing analysis of the energetics of weak ligand binding using the allosteric activator chloride. It is shown that the low affinity of the psychrophilic alpha-amylase for chloride is entropically driven. The high enthalpic and entropic contributions of activator binding suggest large structural fluctuations between the free and the bound states of the cold-active enzyme. The kinetic and thermodynamic data for the psychrophilic alpha-amylase indicate that the strictly conserved side-chains involved in substrate binding and catalysis possess an improved mobility, responsible for activity in the cold, and resulting from the disappearance of stabilizing interactions far from the active site.     

Differential regulation of hexameric and dodecameric hemocyanin from A. leptodactylus

The oxygen binding properties of hemocyanins are regulated on a short time scale by effectors such as l-lactate, urate and protons, and on longer time scales by expression of the different types of subunits. For Astacus leptodactylus it was shown previously that acclimation to higher temperatures leads to increased levels of a 6-meric hemocyanin species, whereas at lower temperatures the 12-meric form prevails. Here we show that the temperature dependence of the two forms supports the idea, that the maintenance of high affinity towards oxygen is the driving force for the differential expression of these hemocyanins. Furthermore, the two different types of hemocyanin differ not only in the affinity to oxygen, but also with respect to their interaction with l-lactate: while the 12-meric form displays a normal shift in oxygen affinity upon the addition of l-lactate this allosteric regulation is absent in the 6-meric form. Exclusive binding of l-lactate to the 12-meric form was supported by isothermal titration calorimetry. These results indicate that l-lactate binds either at the interface between the two hexamers or at subunit α′ which is responsible for the formation of the 12-mers and is not present in the 6-meric form. Urate has a comparable effect on the oxygen affinity of 6-meric and 12-meric forms and also binds to a similar extent to the oxygenated state as determined by isothermal titration calorimetry. Thus, urate and l-lactate do not seem to share the same binding sites. Interestingly, urate binding sites with no allosteric effect seem to exist, which is unusual. This article is part of a Special Issue entitled: Oxygen Binding and Sensing Proteins.