Alkylated derivatives of poly(ethylacrylic acid) can be inserted into preformed liposomes and trigger pH-dependent intracellular delivery of liposomal contents

Poly(ethylacrylic acid) (PEAA) is a pH-sensitive polymer that undergoes a transition from a hydrophilic to a hydrophobic form as the pH is lowered from neutral to acidic values. In this work we show that pH sensitive liposomes capable of intracellular delivery can be constructed by inserting a lipid derivative of PEAA into preformed large unilamellar vesicles (LUV) using a simple one step incubation procedure. The lipid derivatives of PEAA were synthesized by reacting a small proportion (3%) of the carboxylic groups of PEAA with C10 alkylamines to produce C10-PEAA. Incubation of C10-PEAA with preformed LUV resulted in the association of up to 8% by weight of derivatized polymer with the LUV without inducing aggregation. The resulting C10-PEAA-LUV exhibited pH-dependent fusion and leakage of LUV contents on reduction of the external pH below pH 6.0 as demonstrated by lipid mixing and release of calcein encapsulated in the LUV. In addition, C10-PEAA-LUV exhibited pH dependent intracellular delivery properties following uptake into COS-7 cells with appreciable delivery to the cell cytoplasm as evidenced by the appearance of diffuse intracellular calcein fluorescence. It is demonstrated that the cytoplasmic delivery of calcein by C10-PEAA-LUV could be inhibited by agents (bafilomycin or chloroquine) that inhibit acidification of endosomal compartments, indicating that this intracellular delivery resulted from the pH-dependent destabilization of LUV and endosomal membranes by the PEAA component of the C10-PEAA-LUV. It is concluded that C10-PEAA-LUV represents a promising intracellular delivery system for in vitro and in vivo applications.     

Alkylated derivatives of poly(ethylacrylic acid) can be inserted into preformed liposomes and trigger pH-dependent intracellular delivery of liposomal contents

Poly(ethylacrylic acid) (PEAA) is a pH-sensitive polymer that undergoes a transition from a hydrophilic to a hydrophobic form as the pH is lowered from neutral to acidic values. In this work we show that pH sensitive liposomes capable of intracellular delivery can be constructed by inserting a lipid derivative of PEAA into preformed large unilamellar vesicles (LUV) using a simple one step incubation procedure. The lipid derivatives of PEAA were synthesized by reacting a small proportion (3%) of the carboxylic groups of PEAA with C₁₀ alkylamines to produce C₁₀-PEAA. Incubation of C₁₀-PEAA with preformed LUV resulted in the association of up to 8% by weight of derivatized polymer with the LUV without inducing aggregation. The resulting C₁₀-PEAA-LUV exhibited pH-dependent fusion and leakage of LUV contents on reduction of the external pH below pH 6.0 as demonstrated by lipid mixing and release of calcein encapsulated in the LUV. In addition, C₁₀-PEAA-LUV exhibited pH dependent intracellular delivery properties following uptake into COS-7 cells with appreciable delivery to the cell cytoplasm as evidenced by the appearance of diffuse intracellular calcein fluorescence. It is demonstrated that the cytoplasmic delivery of calcein by C₁₀-PEAA-LUV could be inhibited by agents (bafilomycin or chloroquine) that inhibit acidification of endosomal compartments, indicating that this intracellular delivery resulted from the pH-dependent destabilization of LUV and endosomal membranes by the PEAA component of the C₁₀-PEAA-LUV. It is concluded that C₁₀-PEAA-LUV represents a promising intracellular delivery system for in vitro and in vivo applications.     

Effects of hemagglutinin fusion peptide on poly(ethylene glycol)-mediated fusion of phosphatidylcholine vesicles.

The effects of hemagglutinin (HA) fusion peptide (X-31) on poly(ethylene glycol)- (PEG-) mediated vesicle fusion in three different vesicle systems have been compared: dioleoylphosphatidylcholine (DOPC) small unilamellar vesicles (SUV) and large unilamellar vesicles (LUV) and palmitoyloleoylphosphatidylcholine (POPC) large unilamellar perturbed vesicles (pert. LUV). POPC LUVs were asymmetrically perturbed by hydrolyzing 2.5% of the outer leaflet lipid with phospholipase A(2) and removing hydrolysis products with BSA. The mixing of vesicle contents showed that these perturbed vesicles fused in the presence of PEG as did DOPC SUV, but unperturbed LUV did not. Fusion peptide had different effects on the fusion of these different types of vesicles: fusion was not induced in the absence of PEG or in unperturbed DOPC LUV even in the presence of PEG. Fusion was enhanced in DOPC SUV at low peptide surface occupancy but hindered at high surface occupancy. Finally, fusion was hindered in proportion to peptide concentration in perturbed POPC LUV. Contents leakage assays demonstrated that the peptide enhanced leakage in all vesicles. The peptide enhanced lipid transfer between both fusogenic and nonfusogenic vesicles. Peptide binding was detected in terms of enhanced tryptophan fluorescence or through transfer of tryptophan excited-state energy to membrane-bound diphenylhexatriene (DPH). The peptide had a higher affinity for vesicles with packing defects (SUV and perturbed LUV). Quasi-elastic light scattering (QELS) indicated that the peptide caused vesicles to aggregate. We conclude that binding of the fusion peptide to vesicle membranes has a significant effect on membrane properties but does not induce fusion. Indeed, the fusion peptide inhibited fusion of perturbed LUV. It can, however, enhance fusion between highly curved membranes that normally fuse when brought into close contact by PEG.     

Membrane solubilization by a hydrophobic polyelectrolyte: surface activity and membrane binding.

We have previously observed that the hydrophobic polyelectrolyte poly(2-ethylacrylic acid) solubilizes lipid membranes in a pH-dependent manner, and we have exploited this phenomenon to prepare lipid vesicles that release their contents in response to pH, light, or glucose (Thomas, J. L., and D. A. Tirrell. Acc. Chem. Res. 25:336-342, 1992). The physical basis for the interaction between poly(2-ethylacrylic acid) and lipid membranes has been explored using surface tensiometry and fluorimetry. Varying the polymer concentration results in changes in surface activity and membrane binding that correlate with shifts in the critical pH for membrane solubilization. Furthermore, the binding affinity is reduced as the amount of bound polymer increases. These results are consistent with a hydrophobically driven micellization process, similar to those observed with apolipoproteins, melittin, and other amphiphilic alpha-helix-based polypeptides. The absence of specific secondary structure in the synthetic polymer suggests that amphiphilicity, rather than structure, is the most important factor in membrane micellization by macromolecules.     

Retention of aqueous contents during divalent cation-induced fusion of phospholipid vesicles

The relative kinetics of intermixing and release of liposome aqueous contents during Ca²⁺-induced membrane fusion has been investigated. Fusion was monitored by the Tb-dipicolinic acid (DPA) fluorescence assay. Release was followed by the relief of self-quenching of carboxyfluorescein or by Tb fluorescence, with essentially identical results. Fusion of large unilamellar vesicles (LUV) made of phosphatidylserine (PS) in 100 mM NaCl (pH 7.4) at 25°C was initially non-leaky, whereas the fusion of small unilamellar vesicles (SUV) was accompanied by partial release of contents. After several rounds of fusion, the internal aqueous space of the vesicles collapsed. The rate of intermixing of lipids, measured by a resonance energy transfer assay, and the rate of coalescence of aqueous contents during fusion were similar over a range of Ca²⁺ concentrations. Most of the aqueous contents were retained after the fusion of SUV (PS) in 5 mM NaCl and 1 mM Ca²⁺. LUV made of a 1:1 mixture of Bacillus subtilis cardiolipin and dioleoylphosphatidylcholine went through about two rounds of fusion in the presence of Ca²⁺ at 10°C, with complete retention of contents. Similar results were obtained with vesicles composed of phosphatidate/PS/phosphatidylethanolamine/cholesterol (1:2:3:2) in the presence of Ca²⁺ and synexin at 25°C. These results emphasize the diversity of the relative kinetics of fusion and release in different phospholipid vesicle systems under various ionic conditions, and indicate that the initial events in the fusion of LUV are in general, non-leaky.     

Tunable pH-sensitive liposomes composed of mixtures of cationic and anionic lipids

The pH-dependent fusion properties of large unilamellar vesicles (LUVs) composed of binary mixtures of anionic and cationic lipids have been investigated. It is shown that stable LUVs can be prepared from the ionizable anionic lipid cholesteryl hemisuccinate (CHEMS) and the permanently charged cationic lipid N,N-dioleoyl-N, N-dimethylammonium chloride (DODAC) at neutral pH values and that these LUVs undergo fusion as the pH is reduced. The critical pH at which fusion was observed (pH(f)) was dependent on the cationic lipid-to-anionic lipid ratio. LUVs prepared from DODAC/CHEMS mixtures at molar ratios of 0 to 0.85 resulted in vesicles with pH(f) values that ranged from pH 4.0 to 6.7, respectively. This behavior is consistent with a model in which fusion occurs at pH values such that the DODAC/CHEMS LUV surface charge is zero. Related behavior was observed for LUVs composed of the ionizable cationic lipid 3alpha-[N-(N',N'-dimethylaminoethane)-carbamoyl] cholesterol hydrochloride (DC-Chol) and the acidic lipid dioleoylphosphatidic acid (DOPA). Freeze-fracture and (31)P NMR evidence is presented which indicates that pH-dependent fusion results from a preference of mixtures of cationic and anionic lipid for "inverted" nonbilayer lipid phases under conditions where the surface charge is zero. It is concluded that tunable pH-sensitive LUVs composed of cationic and anionic lipids may be of utility for drug delivery applications. It is also suggested that the ability of cationic lipids to adopt inverted nonbilayer structures in combination with anionic lipids may be related to the ability of cationic lipids to facilitate the intracellular delivery of macromolecules.     

Modulation of membrane fusion by membrane fluidity: temperature dependence of divalent cation induced fusion of phosphatidylserine vesicles

We have investigated the temperature dependence of the fusion of phospholipid vesicles composed of pure bovine brain phosphatidylserine (PS) induced by Ca2+ or Mg2+. Aggregation of the vesicles was monitored by 90 degrees light-scattering measurements, fusion by the terbium/dipicolinic acid assay for mixing of internal aqueous volumes, and release of vesicle contents by carboxyfluorescein fluorescence. Membrane fluidity was determined by diphenylhexatriene fluorescence polarization measurements. Small unilamellar vesicles (SUV, diameter 250 A) or large unilamellar vesicles (LUV, diameter 1000 A) were used, and the measurements were done in 0.1 M NaCl at pH 7.4. The following results were obtained: (1) At temperatures (0-5 degrees C) below the phase transition temperature (Tc) of the lipid, LUV (PS) show very little fusion in the presence of Ca2+, although vesicle aggregation is rapid and extensive. With increasing temperature, the initial rate of fusion increases dramatically. Leakage of contents at the higher temperatures remains limited initially, but subsequently complete release occurs as a result of collapse of the internal aqueous space of the fusion products. (2) SUV (PS) are still in the fluid state down to 0 degree C, due to the effect of bilayer curvature, and fuse rapidly in the entire temperature range from 0 to 35 degrees C in the presence of Ca2+. The initial rate of leakage is low relative to the rate of fusion. At higher temperatures (15 degrees C and above), subsequent collapse of the vesicles' internal space causes complete release.(ABSTRACT TRUNCATED AT 250 WORDS)     

Destabilization and Fusion of Zwitterionic Large Unilamellar Lipid Vesicles Induced by a β-Type Structure of the Hiv-1 Fusion Peptide

Abstract

The peptide HIVarg, corresponding to a sequence of 23 amino acid residues at the N-terminus of HIV-1 gp41, has the capacity to induce fusion of large unilamellar vesicles (LUV) consisting of negatively charged or zwitter-ionic phospholipids. In the present study, we further characterize this destabilization and fusion process using LUV consisting of phosphatidylcholine, phosphatidylethanolamine and cholesterol (molar ratio, 1:1:1). Evidence for fusion includes a demonstration of membrane lipid mixing as well as mixing of aqueous vesicle contents. Kinetic analysis of the overall process of vesicle aggregation and fusion revealed that the rate constant of the fusion step per se increased dramatically with the peptide-to-lipid molar ratio, indicating that the peptide acts as a true fusogen. The peptide caused the release of small molecules (Ants/DPX), whereas large solutes (Fitc-dextran, MW_av 19,600) were partly retained. The estimated critical number of peptides per vesicle necessary to release vesicle contents, M = 2-4, indicates that leakage does not involve the formation of classical pores. Infrared spectroscopy of the peptide in the presence of liposomes demonstrated that the equilibrium conformation of the membrane-bound peptide is an antiparallel β-structure. This finding supports the notion that the HTV fusion peptide in a β-conformation has the capacity to perturb vesicle bilayers, inducing initial permeabilization and subsequent membrane fusion.     

Vesicle fusion with bilayer lipid membrane controlled by electrostatic interaction

The fusion of proteoliposomes is a promising approach for incorporating membrane proteins in artificial lipid membranes. In this study, we employed an electrostatic interaction between vesicles and supported bilayer lipid membranes (s-BLMs) to control the fusion process. We combined large unilamellar vesicles (LUVs) containing anionic lipids, which we used instead of proteoliposomes, and s-BLMs containing cationic lipids to control electrostatic interaction. Anionic LUVs were never adsorbed or ruptured on the SiO₂ substrate with a slight negative charge, and selectively fused with cationic s-BLMs. The LUVs can be fused effectively to the target position. Furthermore, as the vesicle fusion proceeds and some of the positive charges are neutralized, the attractive interaction weakens and finally the vesicle fusion saturates. In other words, we can control the number of LUVs fused with s-BLMs by controlling the concentration of the cationic lipids in the s-BLMs. The fluidity of the s-BLMs after vesicle fusion was confirmed to be sufficiently high. This indicates that the LUVs attached to the s-BLMs were almost completely fused, and there were few intermediate state vesicles in the fusion process. We could control the position and amount of vesicle fusion with the s-BLMs by employing an electrostatic interaction.     

Spontaneous transfer of ganglioside GM1 from its micelles to lipid vesicles of differing size.

The spontaneous incorporation of II3-N-acetylneuraminosylgangliotetraosylceramide (GM1) from its micelles into phospholipid bilayer vesicles has been investigated to determine whether curvature-induced changes in membrane lipid packing influence ganglioside uptake. Use of conventional liquid chromatography in conjunction with technically-improved molecular sieve gels permits ganglioside micelles to be separated from phospholipid vesicles of different average size including vesicles with diameters smaller than 40 nm and, thus, allows detailed study of native ganglioside GM1 incorporation into model membranes under conditions where complicating processes like fusion are readily detected if present. At 45 degrees C, the spontaneous transfer rate of GM1 from its micelles to small unilamellar vesicles (SUVs) comprised of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) is at least 3-fold faster than that to similar composition large unilamellar vesicles (LUVs) prepared by octyl glucoside dialysis. Careful analysis of ganglioside GM1 distribution among vesicle populations of differing average size reveals that GM1 preferentially incorporates into the smaller vesicles of certain populations. This behavior is observed in SUVs as well as in LUV-SUV mixtures and actually serves as a sensitive indicator for the presence of trace quantities of SUVs in various LUV preparations. Analysis of the results shows that both differences in the diffusional collision frequency between GM1 monomers and either SUVs or LUVs and curvature-induced changes in the interfacial lipid packing in either SUVs or LUVs can dramatically influence spontaneous ganglioside uptake.(ABSTRACT TRUNCATED AT 250 WORDS)     

Lipid mixing during membrane aggregation and fusion: why fusion assays disagree

The kinetics of lipid mixing during membrane aggregation and fusion was monitored by two assays employing resonance energy transfer between N-(7-nitro-2,1,3-benzoxadiazol-4-yl)phosphatidylethanolamine (NBD-PE) and N-(lissamine Rhodamine B sulfonyl)phosphatidylethanolamine (Rh-PE). For the "probe mixing" assay, NBD-PE and Rh-PE were incorporated into separate populations of phospholipid vesicles. For the "probe dilution" assay, both probes were incorporated into one population of vesicles, and the assay monitored the dilution of the molecules into the membrane of unlabeled vesicles. The former assay was found to be very sensitive to aggregation, even when the internal aqueous contents of the vesicles did not intermix. Examples of this case were large unilamellar vesicles (LUV) composed of phosphatidylserine (PS) in the presence of Mg2+ and small unilamellar vesicles (SUV) composed of phosphatidylserine in the presence of high concentrations of Na+. No lipid mixing was detected in these cases by the probe dilution assay. Under conditions where membrane fusion (defined as the intermixing of aqueous contents with concomitant membrane mixing) was observed, such as LUV (PS) in the presence of Ca2+, the rate of probe mixing was faster than that of probe dilution, which in turn was faster than the rate of contents mixing. Two assays monitoring the intermixing of aqueous contents were also compared. The Tb/dipicolinic acid assay reported slower fusion rates than the 1-aminonaphthalene-3,6,8-trisulfonic acid/N,N'-p-xylylene-bis(pyridinium bromide) assay for PS LUV undergoing fusion in the presence of Ca2+. These observations point to the importance of utilizing contents mixing assays in conjunction with lipid mixing assays to obtain the rates of membrane destabilization and fusion.(ABSTRACT TRUNCATED AT 250 WORDS)     

Enhancing membrane disruption by targeting and multivalent presentation of antimicrobial peptides

In order to enhance the membrane disruption of antimicrobial peptides both targeting and multivalent presentation approaches were explored. The antimicrobial peptides anoplin and temporin L were conjugated via click chemistry to vancomycin and to di- and tetravalent dendrimers. The vancomycin unit led to enhanced membrane disruption of large unilamellar vesicles (LUVs) displaying the vancomycin target lipid II, but only for temporin L and not for anoplin. The multivalent presentation led to enhanced LUV membrane disruption in the case of anoplin but not for temporin L.     

Ovalbumin-induced fusion of acidic phospholipid vesicles at low pH

The interactions of ovalbumin (OA) with large unilamellar vesicles (LUV) of phosphatidylserine (PS) and PS/phosphatidylethanolamine (PE) were studied. It was observed that OA induces aggregation, destabilization, and fusion of these LUV composed of acidic phospholipids at low pH levels. The fusion of LUV by OA was monitored by measuring the intermixing of internal aqueous contents of vesicles, by resonance energy transfer assay which follows the mixing of the membrane components, and by thin-sectioning electron microscopy. The pH profile of fusion was found to be similar to the pH-dependent binding of OA to the same phospholipid vesicles. Proteolytic digestion and hydrophobic labeling with dansyl chloride and photoreactive phosphatidylcholine (PC) of the OA-vesicle complex showed that a segment of OA with a molecular weight of approximately 2,500 penetrates the bilayer. The amino acid composition of this segment indicated that it is the 291-322 fragment and not the putative signal sequence.     

Promotion of acid-induced membrane fusion by basic peptides. Amino acid and phospholipid specificities

The ability of oligo- and polymers of the basic amino acids L-lysine, L-arginine, L-histidine and L-ornithine to induce lipid intermixing and membrane fusion among vesicles containing various anionic phospholipids has been investigated. Among vesicle consisting of either phosphatidylinositol or mixtures of phosphatidic acid and phosphatidylethanolamine rapid and extensive lipid intermixing, but not complete fusion, was induced at neutral pH by poly-L-ornithine or L-lysine peptides of five or more residues. When phosphatidylcholine was included in the vesicles, the lipid intermixing was severely inhibited. Such lipid intermixing was also much less pronounced among phosphatidylserine vesicles. Poly-L-arginine provoked considerable leakage from the various anionic vesicles and caused significantly less lipid intermixing than L-lysine peptides at neutral pH. When the addition of basic amino acid polymer was followed by acidification to pH 5-6, vesicle fusion was induced. Fusion was more pronounced among vesicles containing phosphatidylserine or phosphatidic acid than among those containing phosphatidylinositol, and occurred also with vesicles whose composition resembles that of cellular membranes (i.e., phosphatidylcholine/phosphatidylethanolamine/phosphatidylserine, 50:30:20, by mol). Liposomes with this composition are resistant to fusion by Ca2+ or by acidification after lectin-mediated contact. The tight interaction among vesicles at neutral pH, resulting in lipid intermixing, does not seem to be necessary for the fusion occurring after acidification, but the basic peptides nevertheless appear to play a more active role in the fusion process than simply bringing the vesicles in contact. However, protonation of the polymer side chains and transformation of the polymer into a polycation does not explain the need for acidification, since the pH-dependence was quite similar for poly(L-histidine)- and poly(L-lysine)-mediated fusion.     

Identification and characterization of the putative fusion peptide of the severe acute respiratory syndrome-associated coronavirus spike protein

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) is a newly identified member of the family Coronaviridae and poses a serious public health threat. Recent studies indicated that the SARS-CoV viral spike glycoprotein is a class I viral fusion protein. A fusion peptide present at the N-terminal region of class I viral fusion proteins is believed to initiate viral and cell membrane interactions and subsequent fusion. Although the SARS-CoV fusion protein heptad repeats have been well characterized, the fusion peptide has yet to be identified. Based on the conserved features of known viral fusion peptides and using Wimley and White interfacial hydrophobicity plots, we have identified two putative fusion peptides (SARS(WW-I) and SARS(WW-II)) at the N terminus of the SARS-CoV S2 subunit. Both peptides are hydrophobic and rich in alanine, glycine, and/or phenylalanine residues and contain a canonical fusion tripeptide along with a central proline residue. Only the SARS(WW-I) peptide strongly partitioned into the membranes of large unilamellar vesicles (LUV), adopting a beta-sheet structure. Likewise, only SARS(WW-I) induced the fusion of LUV and caused membrane leakage of vesicle contents at peptide/lipid ratios of 1:50 and 1:100, respectively. The activity of this synthetic peptide appeared to be dependent on its amino acid (aa) sequence, as scrambling the peptide rendered it unable to partition into LUV, assume a defined secondary structure, or induce both fusion and leakage of LUV. Based on the activity of SARS(WW-I), we propose that the hydrophobic stretch of 19 aa corresponding to residues 770 to 788 is a fusion peptide of the SARS-CoV S2 subunit.     

Membrane fusion and the lamellar-to-inverted-hexagonal phase transition in cardiolipin vesicle systems induced by divalent cations.

The polymorphic phase behavior of bovine heart cardiolipin (CL) in the presence of different divalent cations and the kinetics of CL vesicle fusion induced by these cations have been investigated. (31)P-NMR measurements of equilibrium cation-CL complexes showed the lamellar-to-hexagonal (L(alpha)-H(II)) transition temperature (T(H)) to be 20-25 degrees C for the Sr(2+) and Ba(2+) complexes, whereas in the presence of Ca(2+) or Mg(2+) the T(H) was below 0 degrees C. In the presence of Sr(2+) or Ba(2+), CL large unilamellar vesicles (LUVs) (0.1 microm diameter) showed kinetics of destabilization, as assessed by determination of the release of an aqueous fluorescent dye, which strongly correlated with the L(alpha)-H(II) transition of the final complex: at temperatures above the T(H), fast and extensive leakage, mediated by vesicle-vesicle contact, was observed. On the other hand, mixing of vesicle contents was limited and of a highly transient nature. A different behavior was observed with Ca(2+) or Mg(2+): in the temperature range of 0-50 degrees C, where the H(II) configuration is the thermodynamically favored phase, relatively nonleaky fusion of the vesicles occurred. Furthermore, with increasing temperature the rate and extent of leakage decreased, with a concomitant increase in fusion. Fluorescence measurements, involving incorporation of N-NBD-phosphatidylethanolamine in the vesicle bilayer, demonstrated a relative delay in the L(alpha)-H(II) phase transition of the CL vesicle system in the presence of Ca(2+). Freeze-fracture electron microscopy of CL LUV interaction products revealed the exclusive formation of H(II) tubes in the case of Sr(2+), whereas with Ca(2+) large fused vesicles next to H(II) tubes were seen. The extent of binding of Ca(2+) to CL in the lamellar phase, saturating at a binding ratio of 0.35 Ca(2+) per CL, was close to that observed for Sr(2+) and Ba(2+). It is concluded that CL LUVs in the presence of Ca(2+) undergo a transition that favors nonleaky fusion of the vesicles over rapid collapse into H(II) structures, despite the fact that the equilibrium Ca(2+)-CL complex is in the H(II) phase. On the other hand, in the presence of Sr(2+) or Ba(2+) at temperatures above the T(H) of the respective cation-CL complexes, CL LUVs rapidly convert to H(II) structures with a concomitant loss of vesicular integrity. This suggests that the nature of the final cation-lipid complex does not primarily determine whether CL vesicles exposed to the cation will initially undergo a nonleaky fusion event or collapse into nonvesicular structures.     

Osmotic properties of large unilamellar vesicles prepared by extrusion.

We have examined the morphology and osmotic properties of large unilamellar vesicles (LUVs) prepared by extrusion. Contrary to expectations, we observe by cryo-electron microscopy that such vesicles, under isoosmotic conditions, are non-spherical. This morphology appears to be a consequence of vesicle passage through the filter pores during preparation. As a result when such LUVs are placed in a hypoosmotic medium they are able to compensate, at least partially, for the resulting influx of water by "rounding up" and thereby increasing their volume with no change in surface area. The increase in vesicle trapped volume associated with these morphological changes was determined using the slowly membrane-permeable solute [3H]-glucose. This allowed calculation of the actual osmotic gradient experienced by the vesicle membrane for a given applied differential. When LUVs were exposed to osmotic differentials of sufficient magnitude lysis occurred with the extent of solute release being dependent on the size of the osmotic gradient. Surprisingly, lysis was not an all-or-nothing event, but instead a residual osmotic differential remained after lysis. This differential value was comparable in magnitude to the minimum osmotic differential required to trigger lysis. Further, by comparing the release of solutes of differing molecular weights (glucose and dextran) a lower limit of about 12 nm diameter can be set for the bilayer defect created during lysis. Finally, the maximum residual osmotic differentials were compared for LUVs varying in mean diameter from 90 to 340 nm. This comparison confirmed that these systems obey Laplace's Law relating vesicle diameter and lysis pressure. This analysis also yielded a value for the membrane tension at lysis of 40 dyn cm-1 at 23 degrees C, which is in reasonable agreement with previously published values for giant unilamellar vesicles.     

Modeling of matrix vesicle biomineralization using large unilamellar vesicles

Stable, large unilamellar vesicles (LUV) have been constructed that model matrix vesicles (MV) in inducing de novo mineral formation when incubated in synthetic cartilage lymph (SCL). Using a dialysis method for incorporation of predetermined pure lipid, electrolyte and protein constituents, the detergent n-octyl beta-D-glucopyranoside enabled formation of stable, impermeable LUV with a diameter ( approximately 300 nm), lipid composition (phosphatidylcholine-phosphatidylserine-cholesterol, 7:2:2, molar ratio) and enclosed inorganic phosphate level (25-100 mM) similar to that of native MV. Mineral formation by these LUVs was measured by 45Ca(2+) uptake and FTIR analysis following incubation in SCL. Addition of the ionophore A23187 to SCL enabled 45Ca(2+) uptake comparable to that of native MV. FTIR analysis revealed that crystalline mineral formed in the LUV during incubation in SCL, but not in the absence of ionophore. This mineral had an IR absorption spectrum like that of the acid-phosphate-rich, octacalcium phosphate-like mineral formed by native MV. Perturbing the LUV membrane with either detergents or phospholipase A(2) following prior incubation in SCL enabled egress of mineral crystallites from the vesicle lumen, stimulating further mineral formation. Annexin V, a major protein in native MV with known Ca(2+) channel activity, incorporated into the LUV lumen or added to the external medium, induced only limited 45Ca(2+) uptake. This indicates that additional factors are required for annexin V to form Ca(2+) channels. Nevertheless for the first time, stable LUVs have been constructed with MV-like lipid, electrolyte, and protein composition and size that induce formation of mineral like that formed by native MV.     

Influence of molecular weight and pH on adsorption of chitosan at the surface of large and giant vesicles

This paper describes the mechanisms of adsorption of chitosan, a positively charged polyelectrolyte, on the DOPC lipid membrane of large and giant unilamellar vesicles (respectively, LUVs and GUVs). We observe that the variation of the zeta potential of LUVs as a function of chitosan concentration is independent on the chitosan molecular weight (Mw). This result is interpreted in terms of electrostatic interactions, which induce a flat adsorption of the chitosan on the surface of the membrane. The role of electrostatic interactions is further studied by observing the variation of the zeta potential as a function of the chitosan concentration for two different charge densities tuned by the pH. Results show a stronger chitosan-membrane affinity at pH 6 (lipids are negatively charged, and 40% chitosan amino groups are protonated) than at pH 3.4 (100% of protonated amino groups but zwitterionic lipids are positively charged) which confirms that adsorption is of electrostatic origin. Then, we investigate the stability of decorated LUVs and GUVs in a large range of pH (6.0 < pH < 12.0) in order to complete a previous study made in acidic conditions [Quemeneur et al. Biomacromolecules 2007, 8, 2512-2519]. A comparative study of the variation of the zeta potential as a function of the pH (2.0 < pH < 12.0) reveals a difference in behavior between naked and chitosan-decorated LUVs. This result is further confirmed by a comparative observation by optical microscopy of naked and chitosan-decorated GUVs in basic conditions (6.0 < pH < 12.0): at pH > 10.0, in the absence of chitosan, the vesicles present complex shapes, contrary to the chitosan-decorated vesicles which remain spherical, confirming thus that chitosan remains adsorbed on vesicles in basic conditions up to pH = 12.0. These results, in addition with our previous data, show that the chitosan-decorated vesicles are stable over a very broad range of pH (2.0 < pH < 12.0), which holds promise for their in vivo applications. Finally, the quantification of the chitosan adsorption on a LUV membrane is performed by zeta potential and fluorescence measurements. The fraction of membrane surface covered by chitosan is estimated to be lower than 40 %, which corresponds to the formation of a flat layer of chitosan on the membrane surface on an electrostatic basis.     

Uptake of adriamycin into large unilamellar vesicles in response to a pH gradient

Previous work has shown that adriamycin can be accumulated into large unilamellar vesicle (LUV) systems in response to K⁺ diffusion potential established by valinomycin. It is demonstrated here that adriamycin can also be rapidly and efficiently accumulated into egg phosphatidylcholine (egg PC) and egg PC-cholesterol (1:1) LUVs in response to a transmembrane pH gradient (interior acidic) in the absence of ionophores. This ‘active’ loading gives rise to trapping efficiencies as high as 98%, interior drug concentrations as high as 100 mM and significantly enhances drug retention within the vesicles. This procedure may be of general utility for loading liposomal systems for in vivo drug delivery.