Preclinical Studies with Doxorubicin Encapsulated in Polyethyleneglycol-Coated Liposomes

Abstract

Doxorubicin (DOX) has been encapsulated with high efficiency in the water phase of small-sized lipid vesicles. Plasma-induced drug leakage from these vesicles is minimal when hydrogenated phosphatidylcholine is present as the main component. A prolonged circulation time of liposome-encapsulated DOX is observed in animal models when a small fraction of polyethyleneglycol-derivatized phospholipid (PEG) is present in the liposome bilayer. Using these PEG-coated liposomes, we found that the concentration of DOX in tumor implants of the mouse M-109 carcinoma is significantly enhanced by liposome delivery. The antitumor activity of liposome-encapsulated DOX in a lung metastases model of the M-109 carcinoma is superior to that of free DOX. The minimal lethal dose of DOX to tumor-free mice was substantially increased by encapsulation in PEG-coated liposomes, indicating that toxicity is reduced. We also found that the vesicant of DOX after intradermal injection is prevented by liposome encapsulation. These preclinical observations, suggesting that encapsulation of DOX in PEG-coated liposomes may lead to a significant improvement of the therapeutic index of DOX, have led to the initiation of clinical trials in cancer patients.     

Characterization of a novel pH-sensitive peptide that enhances drug release from folate-targeted liposomes at endosomal pHs

Although liposomes have proven useful for the delivery of drugs and gene therapy vectors, their potencies are often compromised by poor unloading following uptake into their target cells. We have consequently explored the properties of a novel 29-residue amphipathic peptide that was designed by arrangement of hydrophobic and hydrophilic residues to disrupt liposomes at lower peptide concentrations than previously tested peptides. The peptide was indeed found to promote pH-dependent liposome unloading with improved efficiency. A peptide of the same sequence, but half the length, however, promoted pH-dependent permeabilization only at much higher concentrations. Further characterization of the longer peptide revealed that release of liposome contents (i) occurred at a pH of ∼6, (ii) became less efficient as the size of the encapsulated cargo increased, and (iii) was moderately suppressed in cholesterol-containing liposomes. Use of this peptide to enhance the cytotoxicity of cytosine arabinoside encapsulated in folate-targeted liposomes demonstrated an increase in drug potency of ∼30-fold. Gene expression by a serum-stable folate-targeted liposomal vector was also measurably enhanced by inclusion of the peptide. We conclude that intracellular unloading of liposomal contents can be significantly improved by co-encapsulation of an optimally designed, pH-sensitive peptide.     

Factors affecting the encapsulation of drugs within liposomes.

The reported efficiencies of drug encapsulation into liposomes range from less than 0.1% to more than 10% per micromole phospholipid, depending on the nature of the drug and of the liposome employed. We have sought to investigate some of the factors which control the efficiency of drug encapsulation. We have found that most polar drugs are sequestered within the internal aqueous compartment of the liposomes, while nonpolar drugs can bind to the liposome membrane in addition to being sequestered, thus accounting for their higher efficiencies of encapsulation. The encapsulation of nonpolar drugs, but not of polar drugs, is very sensitive to the physical characteristics of the liposome membrane; in particular, a fluid membrane favors the efficient encapsulation of nonpolar compounds. The drug cytosine arabinoside is anomalous in that this highly polar compound seems to interact with the liposome membrane at physiological conditions of pH and ionic strength, thus allowing it to be encapsulated with high efficiency.     

Temperature sensitization of liposomes using copolymers of N-isopropylacrylamide.

To obtain liposomes which release the contents in response to ambient temperature, liposomes modified with copolymers of N-isopropylacrylamide with varying lower critical solution temperatures have been designed. Poly(N-isopropylacrylamide-co-acrylamide)s with various compositions were synthesized by free-radical copolymerization. The lower critical solution temperature of the polymer increased with increasing acrylamide content in the polymer. Poly(N-isopropylacrylamide-co-acrylamide-co-N, N-didodecylacrylamide)s were also prepared via the same method as the thermosensitive polymers having anchor groups to the liposome membrane. Calcein-loaded dioleoylphosphatidylethanolamine/egg yolk phosphatidylcholine (6:4, w/w) liposomes were coated with these polymers by incubating the liposomes with aqueous solutions of the polymers. The liposomes hardly released the contents below the lower critical solution temperature of the polymer, but the release was greatly enhanced above that temperature. The liposomes were also made from a mixture of the same lipids and the polymer. The liposome revealed a more drastic release property than the liposomes prepared by the incubation with the polymer solution, because the polymer chains were bound on both surfaces of the membrane. The close relationship between lower critical solution temperatures of the polymers and temperature regions where enhancement of the release from the polymer-fixed liposomes demonstrates that the release was triggered by alteration of the polymers from a hydrophilic state to a hydrophobic state occurring at their lower critical solution temperatures.     

Radio Frequency-Activated Nanoliposomes for Controlled Combination Drug Delivery

This work was conducted in order to design, characterize, and evaluate stable liposomes containing the hydrophobic drug raloxifene HCl (RAL) and hydrophilic doxycycline HCl (DOX), two potentially synergistic agents for treating osteoporosis and other bone lesions, in conjunction with a radio frequency-induced, hydrophobic magnetic nanoparticle-dependent triggering mechanism for drug release. Both drugs were successfully incorporated into liposomes by lipid film hydration, although combination drug loading compromised liposome stability. Liposome stability was improved by reducing the drug load and by including Pluronics® (PL) in the formulations. DOX did not appear to interact with the phospholipid membranes comprising the liposomes, and its release was maximized in the presence of radio frequency (RF) heating. In contrast, differential scanning calorimetry (DSC) and phosphorus-31 nuclear magnetic resonance (³¹P-NMR) analysis revealed that RAL developed strong interactions with the phospholipid membranes, most notably with lipid phosphate head groups, resulting in significant changes in membrane thermodynamics. Likewise, RAL release from liposomes was minimal, even in the presence of RF heating. These studies may offer useful insights into the design and optimization of multidrug containing liposomes. The effects of RAL on liposome characteristics and drug release performance underscore the importance of appropriate physical-chemical analysis in order to identify and characterize drug-lipid interactions that may profoundly affect liposome properties and performance early in the formulation development process.KEY WORDS: controlled release, drug combination, liposomes, nanoparticles     

Liposomal dry powders as aerosols for pulmonary delivery of proteins

The purpose of this research was to develop liposomal dry powder aerosols for protein delivery. The delivery of stable protein formulations is essential for protein subunit vaccine delivery, which requires local delivery to macrophages in the lungs. β-Glucuronidase (GUS) was used as a model protein to evaluate dry powder liposomes as inhaled delivery vehicles. Dimyristoyl phosphatylcholine:cholesterol (7∶3) was selected as the liposome composition. The lyophilization of liposomes, micronization of the powders, aerosolization using a dry powder inhaler (DPI), and in vitro aerodynamic fine particle fraction upon collection in a twinstage liquid impinger were evaluated. After lyophilization and jet-milling, the total amount of GUS and its activity, representing encapsulation efficiency and stability, were evaluated. The GUS amount and activity were measured and compared with freshly-prepared liposomes in the presence of mannitol, 43% of initial GUS amount, 29% of GUS activity after lyophilization and 36% of GUS amount, 22% of activity after micronization were obtained. Emitted doses from dry powder inhaler were 53%, 58%, 66%, and 73% for liposome powder:mannitol carrier ratios of 1∶0, 1∶4, 1∶9, and 1∶19. Fifteen percent of the liposome particles were less than 6.4 μm in aerodynamic diameter. The results demonstrate that milled liposome powders containing protein molecules can be aerosolized effectively at a fixed flow rate. Influences of different cryoprotectants on lyophilization of protein liposome formulations are reported. The feasibility of using liposomal dry powder aerosols for protein delivery has been demonstrated but further optimization is required in the context of specific therapeutic proteins. Published: December 21, 2005     

Liposomes as adjuvant for anti-mycobacterial vaccine development

Mycobacteria are intracellular pathogens that invade and reside inside the macrophages. Recent advances in controlled delivery systems for vaccines such as liposomes have sparked a renewed interest in their potential application for the prevention of mycobacterial infections. The versatility of liposomes in the incorporation of hydrophilic/hydrophobic components, their non-toxic nature, biodegradability, biocompatibility, adjuvanticity, induction of cellular immunity, property of sustained release and prompt uptake by macrophages, makes them attractive candidates for the delivery of antigens. This review focuses on liposome research in the area of mycobacterial diseases and highlights how the various mycobacterial components may be exploited as powerful antigens with liposomes as adjuvants.     

Characterization of a novel pH-sensitive peptide that enhances drug release from folate-targeted liposomes at endosomal pHs

Although liposomes have proven useful for the delivery of drugs and gene therapy vectors, their potencies are often compromised by poor unloading following uptake into their target cells. We have consequently explored the properties of a novel 29-residue amphipathic peptide that was designed by arrangement of hydrophobic and hydrophilic residues to disrupt liposomes at lower peptide concentrations than previously tested peptides. The peptide was indeed found to promote pH-dependent liposome unloading with improved efficiency. A peptide of the same sequence, but half the length, however, promoted pH-dependent permeabilization only at much higher concentrations. Further characterization of the longer peptide revealed that release of liposome contents (i) occurred at a pH of approximately 6, (ii) became less efficient as the size of the encapsulated cargo increased, and (iii) was moderately suppressed in cholesterol-containing liposomes. Use of this peptide to enhance the cytotoxicity of cytosine arabinoside encapsulated in folate-targeted liposomes demonstrated an increase in drug potency of approximately 30-fold. Gene expression by a serum-stable folate-targeted liposomal vector was also measurably enhanced by inclusion of the peptide. We conclude that intracellular unloading of liposomal contents can be significantly improved by co-encapsulation of an optimally designed, pH-sensitive peptide.     

Encapsulation of Enrofloxacin in Liposomes I: Preparation and In Vitro Characterization of LUV

Liposomes are effectively used in the treatment of microbial infections. Higher cellular uptake has been reported when antibiotics are encapsulated in liposomes. In this study, enrofloxacin (ENF) was encapsulated in large unilamellar vesicles (LUVs) and the effects of formulation variables on the liposome characteristics were investigated. Liposomes were prepared using dry lipid film method. A number of variables such as molar ratios of phospholipid (DPPC; DL‐α‐phosphatidylcholine dipalmitoyl), cholesterol, ENF and amount of α‐tocopherol and the volumes of internal (chloroform) and external phases [phosphate buffered saline PBS (pH 7.4)] were studied. In vitro characterization of the liposomes including the encapsulation capacity, size and drug release properties were carried out. Using of this method, spherical LUV liposomes with high drug content could be produced. Particle size of liposomes changed between 3.12 and 4.95 µm. The molar ratios of DPPC, cholesterol and ENF affected the size of the liposome (p < 0.05). The drug encapsulation capacities were high and changed between 37.1% and 79.5%. The highest ENF encapsulation was obtained with the highest cholesterol content. An increase in the drug encapsulation capacity of the liposome was found with increasing molar ratios of DPPC, cholesterol and ENF (p < 0.05). Furthermore, the release of ENF from the liposomes decreased as the molar ratios of DPPC, cholesterol and ENF increased (p < 0.05). In conclusion, a convenient colloidal carrier for the controlled release of ENF can be prepared by changing the formulation parameters of LUVs.     

Preparation and characterization of galactose-modified liposomes by a nonaqueous enzymatic reaction

In this study, NOH (NOH?=?N-octadecyl-4-[(D-galactopyranosyl)oxy]-2,3,5,6-tetrahydroxy hexanamide) was enzymatically synthesized as a targeting molecule and incorporated into liposomes to prepare a liposome surface modified with galactose. Glycyrrhetinic-acid–loaded liposome (GA-LP) and glycyrrhetinic-acid–loaded liposome surface modified with galactose (NOH-GA-LP) were prepared by the ethanol-injection method. NOH-GA-LP was characterized by morphology, particle size, zeta potential, encapsulation efficiency, release in vitro, and stability. The size of spherical particles was in the range of 179–211?nm. Spherical particles exhibit a positive electrical charge (38.7 mV) and possess high encapsulation efficiency (91.3%) and show sustained release (72% over 48 hours) in vitro. This novel approach for the liposome surface modified with galactose by enzymatic synthesis is expected to provide potential application as a drug carrier for active targeted delivery to hepatocytes.     

Encapsulation of enrofloxacin in liposomes I: preparation and in vitro characterization of LUV

Liposomes are effectively used in the treatment of microbial infections. Higher cellular uptake has been reported when antibiotics are encapsulated in liposomes. In this study, enrofloxacin (ENF) was encapsulated in large unilamellar vesicles (LUVs) and the effects of formulation variables on the liposome characteristics were investigated. Liposomes were prepared using dry lipid film method. A number of variables such as molar ratios of phospholipid (DPPC; DL-alpha-phosphatidylcholine dipalmitoyl), cholesterol, ENF and amount of alpha-tocopherol and the volumes of internal (chloroform) and external phases [phosphate buffered saline PBS (pH 7.4)] were studied. In vitro characterization of the liposomes including the encapsulation capacity, size and drug release properties were carried out. Using of this method, spherical LUV liposomes with high drug content could be produced. Particle size of liposomes changed between 3.12 and 4.95 microm. The molar ratios of DPPC, cholesterol and ENF affected the size of the liposome (p < 0.05). The drug encapsulation capacities were high and changed between 37.1% and 79.5%. The highest ENF encapsulation was obtained with the highest cholesterol content. An increase in the drug encapsulation capacity of the liposome was found with increasing molar ratios of DPPC, cholesterol and ENF (p < 0.05). Furthermore, the release of ENF from the liposomes decreased as the molar ratios of DPPC, cholesterol and ENF increased (p < 0.05). In conclusion, a convenient colloidal carrier for the controlled release of ENF can be prepared by changing the formulation parameters of LUVs.     

Pulmonary Delivery of Liposomal Drugs

Abstract

This overview will discuss our studies of liposomes aerosols to treat diseases of the lung and will entail (i) formulation and characterization of liposome aerosols, including dry liposome powder aerosols, (ii) modulation of the pharmacokinetic profile of liposomal drugs delivered by aerosol or intratracheal instillation, (iii) liposome-alveolar macrophage interactions in vitro and in vivo, and (iv) safety of liposome aerosols in vivo in mice, sheep and healthy human volunteers. Water-soluble agents can be retained in liposomes during aerosolization with air-pressure nebulizers within certain limitations of liposome composition, size, and operating conditions. Dry powder liposome aerosols have been formulated and deliver water-soluble encapsulated substances efficiently. Pharmacokinetic profiles of liposomal drugs delivered via intratracheal instillation exhibit typical slow release plasma profiles indicating that the carrier is the rate-limiting barrier for release. Accordingly, pulmonary mean residence times are significantly prolonged and systemic concentrations remain low. Liposomes do not inhibit the phagocytic activity of alveolar macrophages in vitro and in vivo, have no apparent histopathologic effects on lung architecture even after chronic administration, and do not alter dynamic compliance, lung resistance, p_aO₂ and p_aCO₂ in awake, unanesthetized sheep and in healthy human volunteers. In conclusion, liposomes are a promising innocuous aerosol delivery system for drugs to achieve prolonged localized drug concentrations in the lung or intracellular drug targeting to alveolar macrophages.     

Plasmid DNA-encapsulating liposomes: Effect of a spacer between the cationic head group and hydrophobic moieties of the lipids on gene expression efficiency

We have synthesized a series of cationic amino acid-based lipids having a spacer between the cationic head group and hydrophobic moieties and examined the influence of the spacer on a liposome gene delivery system. As a comparable spacer, a hydrophobic spacer with a hydrocarbon chain composed of 0, 3, 5, 7, or 11 carbons, and a hydrophilic spacer with an oxyethylene chain (10 carbon and 3 oxygen molecules) were investigated. Plasmid DNA (pDNA)-encapsulating liposomes were prepared by mixing an ethanol solution of the lipids with an aqueous solution of pDNA. The zeta potentials and cellular uptake efficiency of the cationic liposomes containing each synthetic lipid were almost equivalent. However, the cationic lipids with the hydrophobic spacer were subject to fuse with biomembrane-mimicking liposomes. 1,5-Dihexadecyl-N-lysyl-N-heptyl-l-glutamate, having a seven carbon atom spacer, exhibited the highest fusogenic potential among the synthetic lipids. Increased fusion potential correlated with enhanced gene expression efficiency. By contrast, an oxyethylene chain spacer showed low gene expression efficiency. We conclude that a hydrophobic spacer between the cationic head group and hydrophobic moieties is a key component for improving pDNA delivery.     

Nebulization of Liposomal rh-Cu/Zn–SOD with a Novel Vibrating Membrane Nebulizer

Liposomes are potential drug carriers for pulmonary drug delivery: They can be prepared from phospholipids, which are endogenous to the respiratory tract as a component of pulmonary surfactant, and at an appropriate dose liposomes do not pose a toxicological risk to this organ. Among the various categories of drug that benefit from liposomal entrapment is the anti-inflammatory enzyme superoxide dismutase, thus prolonging its biological half-life. The delivery of liposomes by nebulization is hampered by stability problems, like physical and chemical changes that may lead to chemical degradation and leakage of the encapsulated drug. Here we present data of liposomes aerosolized with a novel electronic nebulizer based on a vibrating membrane technology (PARI eFlow?), which amends drawbacks like liposomes degradation and product release. The data acquisition included aerosol properties such as aerodynamic particle size, nebulization efficiency, and liposome leakage upon nebulization. In conclusion, this study shows the ability of the PARI eFlow? to nebulize high amounts of liposomal recombinant human superoxide dismutase with reduced vesicle disruption tested in an enclosing experimental protocol.     

Characteristics of binding of zwitterionic liposomes to water-soluble proteins

The interactions of zwitterionic phospholipids phosphatidylcholine and phosphatidylethanolamine with protein proteinase inhibitors aprotinin and Bowman-Birk soybean proteinase inhibitor have been investigated. An increase in the hydrophobicity of the liposome surface was shown to be an important factor for the formation of proteoliposomes. According to ³¹P-NMR spectra, incorporation of the proteins into the liposomes does not influence the structural organization of the surface of the liposomes. Increasing the ionic strength does not inhibit the process of proteoliposome formation. Fluorescence assay of the complexes of anthracene-labeled phospholipids with the rhodamine B-labeled protein showed that after the encapsulation into the liposomes, the protein is located inside the particles and between the bilayers. Also, the effect of phospholipids with saturated fatty acid residues on the protein-lipid interaction was studied by differential scanning calorimetry. The results indicate that water-soluble proteins efficiently interact with zwitterionic phospholipids, and the encapsulation of the proteins into the liposomes is provided by electrostatic and hydrophobic forces (in the case of aprotinin) or predominantly by hydrophobic forces (Bowman-Birk soybean proteinase inhibitor).     

Controlled release of cyclosporin A from liposomes-in-microspheres as an oral delivery system

The aim of this study was to prepare cyclosporin A-loaded liposome (CyA-Lip) as an oral delivery carrier, with their encapsulation into microspheres based on alginate or extracellular polysaccharide (EPS) p-m 10356. The main advantage of liposomes in the microspheres (LIMs) is to improve the restricted drug release property from liposomes and their stability in the stomach environment. Alginate microspheres containing CyA-Lip were prepared with a spray nozzle; CyA-Liploaded EPS microspheres were also prepared using a w/o emulsion method. The shape of the LIMs was spherical and uniform, and the particle size of the alginate-LIMs ranged from 5 to 10 μm, and that of the EPS-LIMs was about 100 μm. In a release test, release rate of CyA in simulated intestinal fluid (SIF) from the LIMs was significantly enhanced compared to that in simulated gastric fluid (SGF). In addition, the CyA release rates were slower from formulations containing the liposomes compared to the microspheres without the liposome. Therefore, alginate-and EPS-LIMs have the potential for the controlled release of CyA and as an oral delivery system.     

Preparation and characterization of galactose-modified liposomes by a nonaqueous enzymatic reaction

In this study, NOH (NOH?=?N-octadecyl-4-[(D-galactopyranosyl)oxy]-2,3,5,6-tetrahydroxy hexanamide) was enzymatically synthesized as a targeting molecule and incorporated into liposomes to prepare a liposome surface modified with galactose. Glycyrrhetinic-acid-loaded liposome (GA-LP) and glycyrrhetinic-acid-loaded liposome surface modified with galactose (NOH-GA-LP) were prepared by the ethanol-injection method. NOH-GA-LP was characterized by morphology, particle size, zeta potential, encapsulation efficiency, release in vitro, and stability. The size of spherical particles was in the range of 179-211?nm. Spherical particles exhibit a positive electrical charge (38.7 mV) and possess high encapsulation efficiency (91.3%) and show sustained release (72% over 48 hours) in vitro. This novel approach for the liposome surface modified with galactose by enzymatic synthesis is expected to provide potential application as a drug carrier for active targeted delivery to hepatocytes.     

Essential oils encapsulated in liposomes: a review

Abstract

In the recent years there has been an increased interest toward the biological activities of essential oils. However, essential oils are unstable and susceptible to degradation in the presence of oxygen, light and temperature. So, attempts have been made to preserve them through encapsulation in various colloidal systems such as microcapsules, microspheres, nanoemulsions and liposomes. This review focuses specifically on encapsulation of essential oils into liposomes. First, we present the techniques used to prepare liposomes encapsulating essential oils. The effects of essential oils and other factors on liposome characteristics such as size, encapsulation efficiency and thermal behavior of lipid bilayers are then discussed. The composition of lipid vesicles membrane, especially the type of phospholipids, cholesterol content, the molar ratio of essential oils to lipids, the preparation method and the kind of essential oil may affect the liposome size and the encapsulation efficiency. Several essential oils can decrease the size of liposomes, homogenize the liposomal dispersions, increase the fluidity and reduce the oxidation of the lipid bilayer. Moreover, liposomes can protect the fluidity of essential oils and are stable at 4–5?°C for 6 months at least. The applications of liposomes incorporating essential oils are also summarized in this review. Liposomes encapsulating essential oils are promising agents that can be used to increase the anti-microbial activity of the essential oils, to study the effect of essential oils on cell membranes, and to provide alternative therapeutic agents to treat several diseases.     

Development of a liposome formulation for D-cycloserine local delivery

Multilamellar liposomes loaded with D-cycloserine (D-CS) were prepared by a thin layer evaporation technique, followed by freezing and thawing cycles. Charged components and bioadhesive material, such as distearolylphosphatitylethanolamine covalently coupled with methoxypolyethyleneglycol, were used to prepare liposomes with different physico-chemical and technological properties. Negatively charged liposomes showed higher D-CS encapsulation efficiency (about 37%, w/w) than neutral and positively charged liposomes (about 5 and 17%, w/w, respectively). All formulations showed in vitro, after a burst effect, a prolonged release of the encapsulated drug. Lipid vesicles made of dipalmitoylphosphatidylcholine (DPPC) were used as a biomembrane model to evaluate in vitro the interaction of D-CS with biological membranes. Differential scanning calorimetry was used as a simple and noninvasive technique of analysis. D-CS was distributed in the aqueous compartments of liposomes for interaction with the phospholipid polar head-groups (enhancement of Delta H value). However, due to its high diffusibility the drug was also able to freely permeate through DPPC liposomes, altering during this passage the hydrophobic domains of the bilayers. Stability studies were performed at different temperatures and pH values to assay the integrity of the drug during the liposome production steps. D-CS was rapidly degraded at acidic pH, but no significant hydrolysis was observed at pH 7.4 after 7 days.