Preparation and Bioavailability Assessment of SMEDDS Containing Valsartan

A self-microemulsifying drug delivery system (SMEDDS) has been developed to enhance diffusion rate and oral bioavailability of valsartan. The solubility of valsartan was checked in different oils, surfactants, and cosurfactants and ternary phase diagrams were constructed to evaluate the microemulsion domain. The valsartan SMEDDS was prepared using Capmul MCM (oil), Tween 80 (surfactant), and polyethylene glycol 400 (cosurfactant). The particle size distribution, zeta potential, and polydispersity index were determined and were found to be 12.3 nm, −0.746, and 0.138, respectively. Diffusion rate of valsartan was measured by in vitro dialysis bag method using phosphate buffer pH 6.8 as diffusion media. Developed high-performance liquid chromatography method was used to determine drug content in diffusion media. Oral bioavailability of valsartan SMEDDS was checked by using rabbit model. Results of diffusion rate and oral bioavailability of valsartan SMEDDS were compared with those of pure drug solution and of marketed formulation. Diffusion of valsartan SMEDDS showed maximum drug release when compared to pure drug solution and marketed formulation. The area under curve and time showed significant improvement as the values obtained were 607 ng h/mL and 1 h for SMEDDS in comparison to 445.36 and 1.36 h for market formulation suggesting significant increase (p < 0.01) in oral bioavailability of valsartan SMEDDS.     

Nanostructured lipid carriers as semisolid topical delivery formulations for diflucortolone valerate

Context: Topical treatment of skin disease needs to be strategic to ensure high drug concentration in the skin with minimum systemic absorption.

Objective: The aim of this study was to produce semisolid nanostructured lipid carrier (NLC) formulations, for topical delivery of the corticosteroid drug, diflucortolone valerate (DFV), with minimum systemic absorption.

Method: NLC formulations were developed using a high shear homogenization combined with sonication, using Precirol® ATO5 or Tristearin® as the solid lipid, Capryol? or isopropyl myristate as the liquid lipid and Poloxamer® 407 as surfactant. The present study addresses the influence of different formulations composition as solid lipid, liquid lipid types and concentrations on the physicochemical properties and drug release profile from NLCs.

Results and discussion: DFV-loaded NLC formulations possessed average particle size ranging from 160.40?nm to 743.7?nm with narrow polydispersity index. The encapsulation efficiency was improved by adding the lipid-based surfactants (Labrasol® and Labrafil® M1944CS) to reach 68%. The drug release from the investigated NLC formulations showed a prolonged release up to 12?h. The dermatopharmacokinetic study revealed an improvement in drug deposition in the skin with the optimized DFV-loaded NLC formulation, in contrast to a commercial formulation.

Conclusion: NLC provides a promising nanocarrier system that work as reservoir for targeting topical delivery of DFV.     

Preparation,optimization, and evaluation of Zaltoprofen-loaded microemulsion and microemulsion-based gel for transdermal delivery

Context: Zaltoprofen, a non-steroidal anti-inflammatory drug, has potent inhibitory action against nociceptive responses. However, gastrointestinal ulcer accompanied with anemia due to the bleeding are most cited side effects associated with it. Due to this, administration of Zaltoprofen is not suitable for individuals with gastric ulcer. Thus, there is unmet need to develop an alternative delivery system that will be easy to administer and can avoid ulcerogenic side effects associated with it.

Objective: Present study was aimed to prepare and evaluate microemulsion (ME) and microemulsion-based gel formulation of Zaltoprofen for transdermal delivery.

Materials and methods: Pseudo-ternary phase diagrams were utilized to prepare ME formulations. Effect of surfactant and co-surfactant mass ratio on the ME formation and permeation of ME were evaluated and formulation was optimized. Permeation studies were performed using excised pigskin was studied. Efficacy of optimized formulations was evaluated in rat model of inflammation and pain.

Results: Composition of optimized formulation was 1% (w/w) Zaltoprofen, 20% (w/w) Capryol 90, 50% (w/w) Smix (2:1, Cremophor RH 40 and Transcutol P). Optimized formulation showed globule size of 22.11?nm, polydispersity index of 0.251 and zeta potential of –11.4 mV. ME gel was found safe in skin irritation study. Significant analgesic activity and anti-inflammatory activity of ME gel was observed in hot plate test and rat paw edema test, respectively.

Conclusion: In conclusion, results of present study suggest that ME could be a promising formulation for transdermal administration of Zaltoprofen.     

Controlled Topical Delivery of Hydrocortisone and Mannitol Via Select Pathways

Abstract

In an earlier report (1) we described the controlled follicular delivery of hydrophobic macromolecules from nonionic lipid-based formulations composed of glyceryl dilaurate (GDL), cholesterol (CH), and polyoxyethylene-10-stearyl ether (POE-10). However, the influence of lipid composition on topical delivery of marginally hydrophobic and hydrophilic drugs from these nonionic lipid-based systems has not been investigated. In this report we describe the effect of variation of GDL to POE-10 ratio in the nonionic lipid-based formulations on the extent and route of delivery of hydrocortisone and mannitol, a marginally hydrophobic and hydrophilic model drug, respectively, into and through hairless mouse skin mounted on Franz diffusion cells. The results indicate that the extent of hydrocortisone uptake increased with increasing GDL to POE-10 weight ratio whereas mannitol uptake was quite the opposite and decreased with increasing GDL to POE-10 weight ratio. The diametrically opposite trends for the two drug markers suggests strongly that hydrocortisone and mannitol are transported into and across skin from the nonionic lipid-based formulations via two distinctly different routes. Further, the finding from microautoradiographic studies that the delivery of hydrocortisone from nonionic lipid-based lipid melt formulations was predominantly across the transfollicular route compared to its transport across both the trans-epidermal and transfollicular pathways from nonionic lipid-based liposomes, suggests that it is possible to tailor formulations for specific and targeted delivery across a certain route.     

Design of a liquid nano-sized drug delivery system with enhanced solubility of rivaroxaban for venous thromboembolism management in paediatric patients and emergency cases

Abstract

The increasing incidence of venous thromboembolism (VTE) in paediatric population has stimulated the development of liquid anticoagulant formulations. Thus our goal is to formulate a liquid formulation of poorly-water soluble anticoagulant, rivaroxaban (RIVA), for paediatric use and to assess the possibility of its intravenous administration in emergencies. Self-nanoemulsifying drug delivery systems (SNEDDSs) were developed and characterized. SNEDDS constituents were estimated from the saturated solubility study followed by plotting the corresponding ternary phase diagrams to determine the best self-emulsified systems. Thermodynamic stability, emulsification, dispersibility, robustness to dilution tests, in vitro dissolution, particle size, and zeta potential were executed to optimize the formulations. The optimized formulation, that composed of Capryol 90:Tween 20:PEG 300 (5:45:50), increased RIVA solubility (285.7-fold than water), it formed nanoemulsion with a particle size of 16.15?nm, PDI of 0.25 and zeta potential of ?21.8. It released 100.83?±?2.78% of RIVA after 5?min. SNEDDS was robust to dilution with oral and parenteral fluids and showed safety to human RBCs. SNEDDS showed enhanced bioavailability after oral and intravenous administration than the oral drug suspension (by 1.25 and 1.26-fold, respectively). Moreover, it exhibited enhanced anticoagulant efficacy in the prevention and treatment of carrageenan-induced thrombosis rat model.     

Rice germ oil as multifunctional excipient in preparation of self-microemulsifying drug delivery system (SMEDDS) of tacrolimus

Surmounting the constraints of limited solubilization efficiency and prime requisite of antioxidant for conventional lipid formulations, the research work explores an edge over formulation utilizing potential applicability of rice germ oil (RGO) as a multifunctional excipient. Self-microemulsifying drug delivery system (SMEDDS) of tacrolimus (TAC) was formulated with RGO, an indigenous source of gamma-oryzanol. Being the same biological source, RGO and rice bran oil (RBO) were compared and it was found that RGO have more solubilization potential for TAC (2.2-fold) as well as higher antioxidant activity (8.06-fold) than the RBO. TAC-SMEDDS was prepared using RGO/Capmul PG8 (2:3) as an oil phase, Cremophore EL as a surfactant, and Transcutol P as a cosurfactant. The approximate particle size of TAC-SMEDDS was found to be 38 nm by dynamic light scattering and 12 nm by small angle neutron scattering. The in vitro dissolution studies showed complete and rapid drug release in 30 min compared to a plain drug (<5%) and marketed capsule (<50%). AUC and C _max were found to be 45.05 ± 15.64 ng h/ml and 3.91 ± 1.2 ng/ml for TAC-SMEDDS, 12.59 ± 5.54 ng h/ml and 0.48 ± 0.12 ng/ml for plain TAC, and 30.23 ± 10.34 ng h/ml and 2.31 ± 0.68 ng/ml for marketed formulation, respectively. The improved pharmacokinetic profile of TAC-SMEDDS is correlating to the dissolution results. Thus, gamma-oryzanol-enriched RGO acts as a potential multifunctional excipient for lipid formulations.     

Vincristine-sulphate–loaded liposome-templated calcium phosphate nanoshell as potential tumor-targeting delivery system

Vincristine-sulfate–loaded liposomes were prepared with an aim to improve stability, reduce drug leakage during systemic circulation, and increase intracellular uptake. Liposomes were prepared by the thin-film hydration method, followed by coating with calcium phosphate, using the sequential addition approach. Prepared formulations were characterized for size, zeta potential, drug-entrapment efficiency, morphology by transmission electron microscopy (TEM), in vitro drug-release profile, and in vitro cell cytotoxicity study. Effect of formulation variables, such as drug:lipid ratio as well as nature and volume of hydration media, were found to affect drug entrapment, and the concentration of calcium chloride in coating was found to affect size and coating efficiency. Size, zeta potential, and TEM images confirmed that the liposomes were effectively coated with calcium phosphate. The calcium phosphate nanoshell exhibited pH-dependent drug release, showing significantly lower release at pH 7.4, compared to the release at pH 4.5, which is the pH of the tumor interstitium. The in vitro cytotoxicity study done on the lung cancer cell line indicated that coated liposomes are more cytotoxic than plain liposomes and drug solution, indicating their potential for intracellular drug delivery. The cell-uptake study done on the lung cancer cell line indicated that calcium-phosphate–coated liposomes show higher cell uptake than uncoated liposomes.     

Development of novel topical drug delivery system containing cisplatin and imiquimod for dual therapy in cutaneous epithelial malignancy

Context: Strategy of dual therapy has been proposed to minimize the amount of each drug and to achieve the synergistic effect for cancer therapies.

Objective: The aim of this study was to develop an effective drug delivery system for the simultaneous topical delivery of two anti-tumor agents, cisplatin and imiquimod.

Material and methods: The preformulation studies were carried out in terms of tests for identification, solubility profile, determination of partition coefficient and simultaneous estimation of both drugs by UV–Visible spectrophotometer and High Performance Liquid Chromatography (HPLC). Drug–drug and drug-excipients interactions were examined by thin layer chromatography, infrared spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Provesicular drug delivery system (protransfersome gel formulation) have been prepared and characterized by in vitro and in vivo parameters.

Results: The mean size, poly dispersity index (PDI) and zeta potential of transfersomal vesicles formed by protransfersome hydration were 429.5?nm, 0.631 and ?68.1 Mv, respectively. The prepared formulation showed toxicity on cutaneous squamous cell carcinoma cell line (A-431) at 200?µg (cisplatin) and 1?mg (imiquimod) concentration of drug in combination against control. The cisplatin- and imiquimod-loaded provesicular dual–drug delivery system achieved an optimal antitumor effect, increase in lifespan, antiviral, and toxicity reduction, revealing the advantage of site specific drug delivery and the modified combination therapy.

Discussion: Cisplatin delivery through protransfersome gel in combination with imiquimod may potentiate the activity against solid tumors of epidermal origin.

Conclusion: Data revealed that combination therapy considerably enhances antitumor efficacy of the drug for skin-cited malignancies.     

Microemulsion for topical delivery of fenoprofen calcium: in vitro and in vivo evaluation

The aim of this study was to investigate microemulsion (ME) based topical delivery system for fenoprofen calcium (FPCa) to eliminate its oral gastrointestinal adverse effects. ME was prepared by the water titration method using oleic acid as oil phase, tween 80 as a surfactant and propylene glycol as a cosurfactant. Oleic acid was selected as oil phase due to its good solubilizing capacity. ME existence region was determined using pseudo-ternary phase diagrams for preparing different formulations. Six different formulations were selected with various values of oil (25–68%), water (2–3%), and the mixture of surfactant and cosurfactant (1:1) (24–67%). The selected ME formulae were characterized for optical birefringence, transmission electron microscopy (TEM), pH, % transmittance, electronic conductivity, drug content, droplet size, rheological properties and stability evaluation. In vitro release study of FPCa from ME s through the synthetic membrane and hairless rat skin were evaluated. The optimized formula ME5 consisting of 5% w/w FPCa, 60% w/w oleic acid as oil phase, 3% w/w aqueous phase, and 32% w/w of surfactant phase containing Tween 80 and propylene glycol (1:?1) showed the highest transdermal flux and highest skin permeation rate. Finally, the % inhibition of carrageenan-induced rat paw edema of the optimized formula ME5 was highly significant (p?0.001) as compared to plain gel of FPCa. In conclusion, ME is a promising technique for topical delivery of FPCa.     

Novel Self-Nanoemulsifying Drug Delivery Systems (SNEDDS) for Oral Delivery of Cinnarizine: Design, Optimization, and In-Vitro Assessment

Due to its extreme lipophilicity, the oral delivery of cinnarizine (CN) encounters several problems such as poor aqueous solubility and pH-dependent dissolution, which result in low and erratic bioavailability. The current study aims to design self-nanoemulsifying drug delivery systems (SNEDDS) of CN that circumvent such obstacles. Equilibrium solubility of CN was determined in a range of anhydrous and diluted lipid-based formulations. Dynamic dispersion tests were carried out to investigate the efficiency of drug release and magnitude of precipitation that could occur upon aqueous dilution. Droplet sizes of selected formulations, upon (1:1,000) aqueous dilution, were presented. The optimal formulations were enrolled in subsequent dissolution studies. The results showed that increasing lipid chain length and surfactant lipophilicity raised the formulation solvent capacity, while adding co-solvents provoked a negative influence. The inclusion of mixed glycerides and/or hydrophilic surfactants improved the drug release efficiency. Generally, no significant precipitation was observed upon aqueous dilution of the formulations. Five formulations were optimal in terms of their superior self-emulsifying efficiency, drug solubility, dispersion characteristics, and lower droplet size. Furthermore, the optimal formulations showed superior dissolution profile compared to the marketed (Stugeron®) tablet. Most importantly, they could resist the intensive precipitation observed with the marketed tablet upon shifting from acidic to alkaline media. However, SNEDDS containing medium-chain mixed glycerides showed the highest drug release rate and provide great potential to enhance the oral CN delivery. Accordingly, the lipid portion seems to be the most vital component in designing CN self-nanoemulsifying systems.     

Investigation of archaeosomes as carriers for oral delivery of peptides

Oral administration of peptide and protein drugs faces a big challenge partly due to the hostile gastrointestinal (GI) environment. Lipid-based delivery systems are attractive because they offer some protection for peptides and proteins. In this context, we prepared a special lipid-based oral delivery system: archaeosomes, made of the polar lipid fraction E (PLFE) extracted from Sulfolobus acidocaldarius, and explored its potential as an oral drug delivery vehicle. Our study demonstrates that archaeosomes have superior stability in simulated GI fluids, and enable fluorescent labeled peptides to reside for longer periods in the GI tract after oral administration. Although archaeosomes have little effect on the transport of insulin across the Caco-2 cell monolayers, the in vivo experiments indicated that archaeosomes containing insulin induced lower levels of blood glucose than a conventional liposome formulation. These data indicate that archaeosomes could be a potential carrier for effective oral delivery of peptide drugs.     

Oral delivery of allopurinol niosomes in treatment of gout in animal model

Context: Gout is a painful disorder which does not have an efficient delivery system for its treatment.

Objective: Development and in vitro, in vivo evaluation of allopurinol-loaded nonionic surfactant-based niosomes was envisaged.

Materials and methods: Niosomes were prepared with Span 20 and Tween 20 (1:1 molar ratio) using ether injection method. The formulations were screened for entrapment efficiency, particle size analysis, zeta potential, release kinetics, in vivo activity, and stability studies.

Result: Stable, spherical vesicles of average particle size 304?nm with zeta-potential and entrapment efficiency of 22.2?mV and 79.44?±?0.02%, respectively, were produced. In vitro release study revealed 82.16?±?0.04% release of allopurinol within 24?h. The niosomal formulation was further evaluated for its antigout potential in monosodium urate (MSU) crystal induced gout animal model. The formulation demonstrated significant uric acid level reduction and enhanced antigout activity when compared with the pure allopurinol.

Discussion: The better antigout activity displayed by niosomal formulation could be attributed to sustained release of drug, higher drug solubility within biological fluids, better membrane interaction, smaller size, and presence of cholesterol and surfactant.

Conclusions: This study reveals that niosomes can be an efficient delivery system for the treatment of gout.     

Liposomal hydrogel formulation for transdermal delivery of pirfenidone

Context: Pirfenidone (PFD) is an anti-fibrotic and anti-inflammatory agent indicated for the treatment of idiopathic pulmonary fibrosis (IPF). The current oral administration of PFD has several limitations including first pass metabolism and gastrointestinal irritation.

Objective: The aim of this study is to investigate the feasibility of transdermal delivery of PFD using liposomal carrier system.

Materials and methods: PFD-loaded liposomes were prepared using soy phosphatidylcholine (SPC) and sodium cholate (SC). Encapsulation efficiency (EE) of PFD in liposomes was optimized using different preparation techniques including thin film hydration (TFH) method, direct injection method (DIM) and drug encapsulation using freeze–thaw cycles. In vitro drug release study was performed using dialysis membrane method. The skin permeation studies were performed using excised porcine ear skin model in a Franz diffusion cell apparatus.

Results and discussion: The average particle size and zeta-potential of liposomes were 191?±?4.1?nm and ?40.4?±?4.5?mV, respectively. The liposomes prepared by TFH followed by 10 freeze–thaw cycles showed the greatest EE of 22.7?±?0.63%. The optimized liposome formulation was incorporated in hydroxypropyl methyl cellulose (HPMC) hydrogel containing different permeation enhancers including oleic acid (OA), isopropyl myristate (IPM) and propylene glycol (PG). PFD-loaded liposomes incorporated in hydrogel containing OA and IPM showed the greatest flux of 10.9?±?1.04?μg/cm²/h across skin, which was 5-fold greater compared with free PFD. The cumulative amount of PFD permeated was 344?±?28.8?μg/cm² with a lag time of 2.3?±?1.3?h.

Conclusion: The hydrogel formulation containing PFD-loaded liposomes can be developed as a potential transdermal delivery system.     

Development and Evaluation of Buccoadhesive Controlled Release Tablets of Lercanidipine

The purpose of this research was to develop and evaluate buccal mucoadhesive controlled release tablets of lercanidipine hydrochloride using polyethylene oxide and different viscosity grades of hydroxypropyl methylcellulose individually and in combination. Effect of polymer type, proportion and combination was studied on the drug release rate, release mechanism and mucoadhesive strength of the prepared formulations. Buccal mucoadhesive tablets were made by direct compression and were characterized for content uniformity, weight variation, friability, surface pH, thickness and mechanism of release. In order to estimate the relative enhancement in bioavailability one optimized formulation was evaluated in rabbits. Further, placebo tablets were also evaluated for acceptability in human subjects. Results indicated acceptable physical characteristics of designed tablets with good content uniformity and minimum weight variation. Drug release and mucoadhesive strength were found to depend upon polymer type, proportion and viscosity. The formulations prepared using poly ethylene oxide gave maximum mucoadhesion. The release mechanism of most formulations was found to be of anomalous non-Fickian type. In vivo studies of selected formulation in rabbits demonstrated significant enhancement in bioavailability of lercanidipine hydrochloride relative to orally administered drug. Moreover, in human acceptability studies of placebo formulations, the designed tablets adhered well to the buccal mucosa for more than 4 h without causing any discomfort. It may be concluded that the designed buccoadhesive controlled release tablets have the potential to overcome the disadvantage of poor and erratic oral bioavailability associated with the presently marketed formulations of lercanidipine hydrochloride.     

Novel flexible vesicles based topical formulation of levocetirizine: in vivo evaluation using oxazolone-induced atopic dermatitis in murine model

Background: Levocetirizine, an active enantiomer of cetirizine is third generation antihistaminic agent used for treating various allergies like atopic dermatitis, chronic idiopathic urticaria and allergic rhinitis.

Objective: Development of novel topical formulation of levocetirizine based on flexible vesicles (FVs) with an aim to have targeted peripheral antihistaminic effect.

Materials and methods: The FVs were prepared by thin film hydration method and characterized for drug content, entrapment efficiency, pH, vesicular size, spreadability, morphological characteristics and drug leakage studies. Franz diffusion cell assembly was used to carry out the ex vivo permeation studies through mice skin and the permeation profile of the developed FV formulation was compared with conventional formulations of levocetirizine.

Results and discussion: The ex vivo permeation studies revealed 1.78-fold increase in percent permeation of levocetirizine from FV formulation as compared to conventional formulations of levocetirizine in 8?h. Further, oxazolone induced atopic dermatitis murine model was selected to study the in vivo pharmacodynamic activity. The developed formulation was evaluated for scratching score, erythema score and histological evaluation. There was marked reduction in scratching score from 15.25 scratches/20?min with conventional levocetirizine cream to 6.75 scratches/20?min with application of levocetirizine FV formulation. Also, there was significant reduction in erythema score as well as dermal eosinophil count. Results of skin sensitivity and toxicity studies suggest that the developed formulation was dermally safe and nontoxic.

Conclusion: A novel FVs based topical formulation of levocetirizine was successfully developed for treatment of atopic dermatitis.     

Chronotherapeutically Modulated Pulsatile System of Valsartan Nanocrystals—an <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

The objective was to improve the dissolution of valsartan by developing valsartan nanocrystals and design a pulsed release system for the chronotherapy of hypertension. Valsartan nanocrystals were prepared by sonication—anti-solvent precipitation method and lyophilized to obtain dry powder. Nanocrystals were directly compressed to minitablets and coated to achieve pulsatile valsartan release. Pharmacokinetic profiles of optimized and commercial formulations were compared in rabbit model. The mean particle size and PDI of the optimized nanocrystal batch V4 was reported as 211 nm and 0.117, respectively. DSC and PXRD analysis confirmed the crystalline nature of valsartan in nanocrystals. The dissolution extent of valsartan was markedly enhanced with both nanocrystals and minitablets as compared to pure valsartan irrespective of pH of the medium. Core minitablet V4F containing 5% w/w polyplasdone XL showed quickest release of valsartan, over 90% within 15 min. Coated formulation CV4F showed two spikes in release profile after successive lag times of 235 and 390 min. The pharmacokinetic study revealed that the bioavailability of optimized formulation (72.90%) was significantly higher than the commercial Diovan tablet (30.18%). The accelerated stability studies showed no significant changes in physicochemical properties, release behavior, and bioavialability of CV4F formulation. The formulation was successfully designed to achieve enhanced bioavailability and dual pulsatile release. Bedtime dosing will more efficiently control the circadian spikes of hypertension in the morning.     

Effect of formulation factors on in vitro transcorneal permeation of gatifloxacin from aqueous drops

The purpose of this research was to optimize the formulation factors for maximum in vitro permeation of gatifloxacin from aqueous drops through excised goat cornea and to evaluate the permeation characteristics of drug from selected marketed eyedrop formulations. Permeation studies were conducted by putting 1 mL of formulation on the cornea (0.67 cm²) fixed between the donor and receptor compartments of an all-glass modified Franz diffusion cell and measuring gatifloxacin concentration in the receptor (containing normal saline under stirring) by spectrophotometry at 291.5 nm, after 120 minutes. Raising the drug concentration of the drops increased the drug permeation but decreased the percent permeation and the in vitro ocular availability. Raising the pH of the formulation from pH 5 to 7.2 increased both the drug permeation and the in vitro ocular availability. Eyedrops containing benzalkonium chloride (BAK; 0.01% wt/vol) and disodium edetate (EDTA; 0.01% wt/vol) showed maximum permeation, followed by Zymar, BAK (0.01% wt/vol), Gatilox, Gatiquin, and Gate (statistically significantP<.05 compared with control). In vitro titration of the formulations with 0.1N NaOH indicated the presence of a buffer in Zymar (pH 6) and Gate (pH 5.8), which may cause irritation and induce lacrimation, resulting in reduced ocular availability in vivo. Thus, formulation with BAK and EDTA, which is unbuffered, has a better likelihood of being absorbed in vivo. The BAK-EDTA formulation significantly (P<.05) increased the permeation of gatifloxacin through paired excised corneas of goat, sheep, and buffalo, compared with the control formulation. The goat cornea showed the greatest increase in permeation, followed by the sheep and buffalo corneas. Published: July 7, 2006     

Enhancement of Bioavailability of Cefpodoxime Proxetil Using Different Polymeric Microparticles

Poorly water-soluble drugs such as cefpodoxime proxetil (400 μg/ml) offer a challenging problem in drug formulation as poor solubility is generally associated with poor dissolution characteristics and thus poor oral bioavailability. According to these characteristics, preparation of cefpodoxime proxetil microparticle has been achieved using high-speed homogenization. Polymers (methylcellulose, sodium alginate, and chitosan) were precipitated on the surface of cefpodoxime proxetil using sodium citrate and calcium chloride as salting-out agents. The pure drug and the prepared microparticles with different concentrations of polymer (0.05–1.0%) were characterized in terms of solubility, drug content, particle size, thermal behavior (differential scanning calorimeter), surface morphology (scanning electron microscopy), in vitro drug release, and stability studies. The in vivo performance was assessed by pharmacokinetic study. The dissolution studies demonstrate a marked increase in the dissolution rate in comparison with pure drug. The considerable improvement in the dissolution rate of cefpodoxime proxetil from optimized microparticle was attributed to the wetting effect of polymers, altered surface morphology, and micronization of drug particles. The optimized microparticles exhibited excellent stability on storage at accelerated condition. The in vivo studies revealed that the optimized formulations provided improved pharmacokinetic parameter in rats as compared with pure drug. The particle size of drug was drastically reduced during formulation process of microparticles.     

Statistical optimization of gastric floating system for oral controlled delivery of calcium

The development of an optimized gastric floating drug delivery system is described. Statistical experimental design and data analysis using response surface methodology is also illustrated. A central, composite Box-Wilson design for the controlled release of calcium was used with 3 formulation variables: X₁ (hydroxypropyl methylcellulose [HPMC] loading), X₂ (citric acid loading), and X₃ (magnesium stearate loading). Twenty formulations were prepared, and dissolution studies and floating kinetics were performed on these formulations. The dissolution data obtained were then fitted to the Power Law, and floating profiles were analyzed. Diffusion exponents obtained by Power Law were used as targeted response variables, and the constraints were placed on other response variables. All 3 formulation variables were found to be significant for the release properties (P<,05), while only HPMC loading was found to be significant for floating properties. Optimization of the formulations was achieved by applying the constrained optimization. The optimized formulation delivered calcium at the release rate of 40 mg/hr, with predicted n and T_50% values at 0.93 and 3.29 hours, respectively. Experimentally, calcium was observed to release from the optimized formulation with n and T_50% values of 0.89 (±0.10) and 3.20 (±0.21) hours, which showed an excellent agreement. The quadratic mathematical model developed could be used to further predict formulations with desirable release and floating properties.