A method for sequencing polymerase chain reaction products can be used to sequence Bacillus subtilis "miniprep" plasmid DNA

Several methods for sequencing double-stranded plasmid DNA isolated from E. coli have been described. These methods are usually not effective when used to sequence plasmid DNA isolated from Bacillus subtilis. In the course of developing a simplified version of a previously published protocol for polymerase chain reaction product sequencing, it was found that this protocol could be used for sequencing plasmid DNA isolated from Bacillus subtilis.     

Rapid generation of subclones for DNA sequencing using the reverse cloning procedure

A fast and reliable procedure for generating subclones necessary for sequencing long stretches of DNA has been developed. The reverse cloning procedure involves cloning a fragment of DNA into a single-stranded plasmid or phage vector containing a polycloning region; synthesizing variable lengths of double-stranded DNA using a "Universal Primer"; isolating the double-stranded DNA; and force cloning the double-stranded DNA fragments into a complementary vector with the polycloning region in the reverse orientation. The resulting clones can be sequenced, using the same Universal Primer and T7 DNA polymerase, to provide overlapping DNA sequences. The reverse cloning procedure can be used to construct deletion mutations.     

Thermal cycle dideoxy DNA sequencing

Thermal cycle dideoxy DNA sequencing eliminates the requirements for independent primer annealing and double-stranded DNA denaturation steps. The method enables sequencing from nanogram amounts of DNA from double-stranded and single-stranded PCR products, and plasmid or phage DNA templates. Thermal cycle sequencing also enables direct sequencing from bacterial colonies or phage plaques. Protocols using the Vent exo⁻ DNA polymerase, helpful suggestions, and a troubleshooting guide are also presented.     

A cost-effective plasmid purification protocol suitable for fluorescent automated DNA sequencing

A cost-effective, reliable, and reproducible method has been developed to produce good-quality, double-stranded plasmid DNA for automated sequence analysis. The method incorporates modifications to a previously described plasmid-purification protocol used in manual sequencing. The quality of the DNA produced from the present protocol is suitable for automated fluorescent sequencing. Using a dye-terminator sequencing protocol, most runs using plasmid DNA prepared using this protocol produced over 700 bases with greater than 99% base-calling accuracy.     

The production of single-stranded DNA suitable for sequencing using the polymerase chain reaction

A simple and reliable procedure for the amplification of single-stranded DNA suitable for sequencing is described. This procedure employs the polymerase chain reaction and implements modifications pertaining to the purification of the double-stranded DNA product prior to single-stranded DNA amplification. The most consistent sequencing reactions are obtained when the double-stranded DNA product is purified by centrifugation with a microconcentrator prior to single-stranded DNA amplification and the overall amount of specific primers and number of cycles used, in both single-stranded and double-stranded DNA polymerase chain reactions, are reduced.     

TempliPhi,phi29 DNA polymerase based rolling circle amplification of templates for DNA sequencing

We have developed a novel, isothermal DNA amplification strategy that employs phi29 DNA polymerase and rolling circle amplification to generate high-quality templates for DNA sequencing reactions. The TempliPhi DNA amplification kits take advantage of the fact that cloned DNA is typically obtained in circular vectors, which are readily replicated in vitro using phi29 DNA polymerase by a rolling circle mechanism. This single subunit, proofreading DNA polymerase has excellent processivity and strand displacement properties for generation of multiple, tandem double-stranded copies of the circular DNA, generating as much as 10(7)-fold amplification. Large amounts of product (1-3 microg) can be obtained in as little as 4 hours. Input DNA can be as little as 0.01 ng of purified plasmid DNA, a single bacterial colony, or a 1 microL of a saturated overnight culture. Additionally, the presence of an associated proof reading function within the phi29 DNA polymerase ensures high-fidelity amplification. Once completed, the product DNA can be used directly in sequencing reactions. Additionally, the properties of phi29 DNA polymerase and its use in applications such as amplification ofhuman genomic DNA for genotyping studies is discussed.     

PCR preparation of DNA inserts from lambda and plasmid vectors for RFLP mapping

A simplified method is described for preparing insert DNA for labelling reactions to be used in Southern hybridization. This method works with sequences cloned into both plasmid and lambda phage, and eliminates many of the steps leading to the labelling reaction. Small quantities of hostE. coli or lambda phage carrying a probe sequence are lysed and amplified via the polymerase chain reaction using standard sequencing primers. Unincorporated nucleotides are removed by ethanol precipitation or gel purification and insert DNA is ready for radio-labelling. This method reduces the time and expense associated with conventional insert preparation, and greatly simplifies the use of sequences cloned into lambda phage.     

A directed nucleotide-sequencing approach for single-stranded vectors based on recloning intermediates of a progressive DNA synthesis reaction

A simple method for site-directed nucleotide sequencing is presented that uses a novel procedure for generating nested 'deletions' within inserts of single-stranded clones. In this method, single-stranded template, sequencing primer, and the Klenow fragment of Escherichia coli DNA polymerase I are used to initiate progressive DNA synthesis of the entire insert of the clone. By time-dependent sampling and pooling of intermediates from the synthesis reaction a series of nested double-stranded DNA subfragments of the insert can be created. Nested subclones are then produced by S1-endonuclease treatment and oriented subcloning methods. First, smaller quantities of template DNA can be used, equivalent to a fraction of a small DNA sequencing prep. Second, it works with single-stranded M13 phage DNA rather than requiring the preparation of double-stranded replicative form DNA as in ExoIII-based methods. Third, the 'deletions' it generates can span areas of simple nucleotide sequence or secondary structure that often halt digestion in the single-stranded exonuclease-based method. Last, the method is adaptable to a larger variety of insert cloning sites than the ExoIII-based method. The main disadvantage of the method is that, due to the lower efficiency of subcloning larger DNA fragments, subclone inserts larger than 3 kb are generated only infrequently.     

Large scale sequencing projects using rapidly prepared double-stranded plasmid DNA.

We have developed a simple rapid plasmid DNA mini-preparation method which yields DNA of sufficient quality to be used in large scale sequencing projects. The method, which is a modification of the alkaline method of Birnboim and Doly (1979), requires less than two hours. We have eliminated the use of organic extractions, RNase digestion and alkaline denaturation of the DNA for annealing of the primer. The proportion of supercoiled plasmid DNA obtained is close to 100%. Greater than 80% of the clones yield at least 500 bp of sequence information per primer. The sequencing reactions from these double-stranded templates can be done on both strands using the universal and reverse sequence primers with the usual two reactions per primer, one to read close to the primer and one to read far from it. Thus, each clone yields at least 1 kb of sequence information. The preparation of the templates and the sequencing reactions can be done in less than three hours so that the sequencing gel can be run the same day.     

DNA-dependent RNA polymerases from Drosophila melanogaster adults: Isolation and partial characterization

In preparation for the isolation and biochemical characterization of putative RNA polymerase mutants, DNA-dependent RNA polymerases of Drosophila melanogaster adults were isolated and partially characterized. Approximately 70% of the female adult RNA polymerase is located in ovaries. Multiple forms of ovarian RNA polymerases I and II are separable by DEAE-Sephadex chromatography. The two forms of RNA polymerase II differ in ammonium sulfate optima. RNA polymerase IIA is more active with double-stranded DNA as template, whereas RNA polymerase IIB transcribes single-stranded DNA most efficiently. Rechromatography of RNA polymerase IIA on DEAE-Sephadex results in the loss of ability of this form to transcribed double-stranded DNA most efficiently. Ovariectomized carcasses have two forms of RNA polymerase I and one form of RNA polymerase II and each transcribes single-stranded DNA most efficiently. As judged by gel filtration chromatography, female adult extracts have forms of RNA polymerase II that differ in molecular weight and template preference.Supported by Grants GM23456 from the NIH and 11259 from the City University Research Foundation.     

New insights into the QuikChangeTM process guide the use of Phusion DNA polymerase for site-directed mutagenesis

The QuikChange^TM site-directed mutagenesis method is popular but imperfect. An improvement by using partially overlapping primers has been reported several times; however, it is incompatible with the proposed mechanism. The QuikChange^TM method using complementary primers is proposed to linearly amplify a target plasmid with the products annealing to produce double-stranded DNA molecules with 5′-overhangs. The overhang annealing is supposed to form circular plasmids with staggered breaks, which can be repaired in Escherichia coli after transformation. Here, we demonstrated that the PCR enzyme fills the 5′-overhangs in the early cycles, and the product is then used as the template for exponential amplification. The linear DNA molecules with homologous ends are joined to generate the plasmid with the desired mutations through homologous recombination in E. coli. The correct understanding is important to method improvements, guiding us to use partially overlapping primers and Phusion DNA polymerase for site-directed mutagenesis. Phusion did not amplify a plasmid with complementary primers but used partially overlapping primers to amplify the plasmid, producing linear DNA molecules with homologous ends for site-directed mutagenesis.     

High-throughput plasmid DNA purification for 3 cents per sample

To accommodate the increasingly rapid rates of DNA sequencing we have developed and implemented an inexpensive, expeditious method for the purification of double-stranded plasmid DNA clones. The robust nature, high throughput, low degree of technical difficulty and extremely low cost have made it the plasmid DNA preparation method of choice in both our expressed sequence tag (EST) and genome sequencing projects. Here we report the details of the method and describe its application in the generation of more than 700 000 ESTs at a rate exceeding 16 000 per week.     

Elimination of band compression in sequencing gels by the use of N4-methyl-2'-deoxycytidine 5'-triphosphate.

Taq DNA polymerase, Sequenase, and the large fragment of E.coli polymerase I effectively utilize N4-methyl-2'-deoxycytidine 5'-triphosphate (N4-methyl-dCTP) in the place of dCTP in dideoxynucleotide terminator sequencing reactions on single-stranded templates. When the resulting fragment mixtures are resolved on sequencing gels, they are found to be free of band compressions even in cases where such compressions remain unresolved by the substitution of 7-deaza-dGTP for dGTP. Sequencing reactions using N4-methyl-dCTP instead of dCTP are somewhat more prone to false stops than are sequencing reactions using 7-deaza-dGTP instead of dGTP; this difference is more pronounced when sequencing with Sequenase at 37 degrees C than when sequencing with Taq DNA polymerase at 72 degrees C. For the three polymerases investigated, replacement of dCTP by N4-methyl-dCTP does not fundamentally change the characteristic variations in band intensities seen in the C-lane. N4-methyl-dCTP can also be used for sequencing double-stranded DNA and for DNA amplification by the polymerase chain reaction.     

Micro- and nanoparticles of condensed DNA Formed in PCR with <Emphasis Type="Italic">Taq</Emphasis> polymerase and plasmid DNA as a template

Formation of micro- and nanoparticles of condensed DNA during PCR with microbial genomic DNA or plasmid DNA as templates was reported previously. Initially, the microparticles were formed using a thermostable KlenTaq polymerase, which is a deletion variant of Taq polymerase. The present work shows that Taq polymerase is also capable of efficient formation of micro- and nanoparticles of condensed DNA in PCR. Electron microscopy revealed a number of morphological types (more than four) of microparticles produced in PCR with different reaction buffers in the presence of Taq polymerase and different plasmid DNAs as a template. In the case of some kinds of amplicons, an increase in the number of thermal cycles was shown to result in production of numerous nanowires and electron-dense spherical nanoparticles. The PCR conditions for preferential formation of discs (or ellipsoids) a few micrometers in diameter and several dozens of nanometers in thickness were determined. The structure of microparticles formed in the presence of Taq polymerase was found to depend on the level of synthesis of single-stranded DNA fragments in PCR. Experiments with nuclease S1 revealed that, along with double-stranded DNAs of the amplicon, micro- and nano-particles contained single-stranded DNA fragments, which were absolutely necessary for their formation. In light of these data, the molecular mechanism of micro- and nanoparticle formation in the course of PCR is discussed.     

CircumVent thermal cycle sequencing and alternative manual and automated DNA sequencing protocols using the highly thermostable VentR (exo-) DNA polymerase.

CircumVent thermal cycle and standard DNA sequencing protocols utilizing the cloned and highly thermostable VentR (exo-) DNA polymerase are described. The thermal cycle sequencing procedures are advantageous because they allow fast and simple semiautomation of the sequencing reaction; make possible the direct DNA sequencing of PCR products, bacterial colonies and phage plaques; require only femtomoles of template DNA; eliminate the requirement of an independent primer annealing step; remove the requirement of denatured plasmids for sequencing double-stranded templates; and use a highly thermostable DNA polymerase for sequencing through potential recalcitrant secondary structure domains and large linear double-stranded DNA templates such as lambda derivatives. More standard methods of DNA sequencing (i.e., a one-step protocol and a labeling-termination protocol) are also presented. For each protocol, alternatives for choice of label and method of labeling are presented, including the use of 5' biotinylated primers for chemiluminescent DNA sequencing and fluorinated primers for automated sequencing using the BaseStation Automated DNA Sequencer.     

A cloning vehicle suitable for strand separation

A new plasmid has been constructed which contains a poly(A) : poly(dT) duplex segment of length approx. 100 base pairs (bp) inserted into the PvuII site of pBR322. This plasmid, pKH47, has all the other restriction sites of pBR322 available for insertion of foreign DNA, and has the same drug resistance genes as does the parental plasmid. The complementary strands of the linearized denatured plasmid DNA can be separated rapidly an efficiently by affinity chromatography with oligo(dA)- and oligo(dT)-cellulose columns in series. More than 90% of the input DNA is recovered as separated strands which can be annealed to form full length double-stranded molecules. One of the applications of the plasmid is to prepare separated complementary strands for sequencing by the chain-terminator technique using DNA primers. This application is illustrated by a sequencing example for a Drosophila DNA insert carrying a tRNA gene.     

Method enabling pyrosequencing on double-stranded DNA

Pyrosequencing is a new nonelectrophoretic, single-tube DNA sequencing method that takes advantage of co-operativity between four enzymes to monitor DNA synthesis (M. Ronaghi, M. Uhlén, and P. Nyrén, Science 281, 363-365). Pyrosequencing has so far only been performed on single-stranded DNA. In this paper different enzymatic strategies for template preparation enabling pyrosequencing on double-stranded DNA were studied. High quality data were obtained with several different enzyme combinations: (i) shrimp alkaline phosphatase and exonuclease I, (ii) calf intestine alkaline phosphatase and exonuclease I, (iii) apyrase and inorganic pyrophosphatase together with exonuclease I, and (iv) apyrase and ATP sulfurylase together with exonuclease I. In many cases, when the polymerase chain reaction was efficient exonuclease I could be omitted. In certain cases, additives such as dimethyl sulfoxide, single-stranded DNA-binding protein, and Klenow DNA polymerase improved the sequence quality. Apyrase was the fastest and most efficient of the three different nucleotide degrading enzymes tested. The data quality obtained on double-stranded DNA was comparable with that on single-stranded DNA. Pyrosequencing data for more than 30 bases could be generated on both long and short templates, as well as on templates with high GC content.