Folding of apocytochrome c in lipid micelles: formation of alpha-helix precedes membrane insertion.

Apocytochrome c, which in aqueous solution is largely unstructured, acquires a highly alpha-helical structure upon interaction with lipid. The alpha-helix content induced in apocytochrome c depends on the lipid system, and this folding process is driven by both electrostatic and hydrophobic lipid-protein interactions. The folding kinetic mechanism of apocytochrome c induced by zwitterionic micelles of lysophosphatidylcholine (L-PC), predominantly driven by hydrophobic lipid-protein interactions, was investigated by fluorescence stopped-flow measurements of Trp 59 and fluorescein-phosphatidylethanolamine-(FPE) labeled micelles, in combination with stopped-flow far-UV circular dichroism. It was found that formation of the alpha-helical structure of apocytochrome c precedes membrane insertion. The unfolded state in solution (U(W)) binds to the micelle surface in a helical conformation (I(S)) and is followed by insertion into the lipid micelle, i.e., formation of the final helical state H(L). Binding of apocytochrome c to the lipid micelle (U(W) --> I(S)) is concurrent with formation of a large fraction (75-100%, depending on lipid concentration) of the alpha-helical structure of the final lipid-inserted state H(L). The highly helical intermediate I(S) is formed on the time scale of 3-12 ms, depending on lipid concentration, and inserts into the lipid micelle (I(S) --> H(L)) in the time range of approximately 200 ms to >1 s, depending on lipid-to-protein ratio. The final lipid-inserted helical state H(L) in L-PC micelles has an alpha-helix content approximately 65% of that of cytochrome c in solution and has no compact stable tertiary structure as revealed by circular dichroism results.     

Surface chemical properties of homologs and analogs of lysophosphatidylcholine and lysophosphatidylethanolamine in water

Equilibrium surface tension versus concentration curves for aqueous solutions of homologs of lysophosphatidylcholine (lysoPC) and lysophosphatidylethanolamine (lysoPE) and two analogs of lysoPC, that is, alkylphosphorylcholine and partially fluorinated lysoPC were measured by the Wilhelmy plate method using a ground-glass plate. From these measurements the critical micelle concentration (cmc), the molecular area in saturated adsorption, the standard chemical potential of adsorption from the infinitely dilute solution to the saturated adsorption surface, and the standard chemical potential of micellization were obtained for each lipid. Further, the measurements of the free energy of formation of black film, the steady-state fluorescence anisotropy in the non-polar region of black film and the rate of growth of black film were performed separately for single foam films of the above lipids, together with the measurement of foam stability. By comparing these surface chemical properties among the respective lysophospholipids, the difference in foam stability between lysoPC and lysoPE is discussed in terms of these static and dynamic properties of solution surfaces and single foam films.     

A refinement protocol to determine structure,topology, and depth of insertion of membrane proteins using hybrid solution and solid-state NMR restraints

To fully describe the fold space and ultimately the biological function of membrane proteins, it is necessary to determine the specific interactions of the protein with the membrane. This property of membrane proteins that we refer to as structural topology cannot be resolved using X-ray crystallography or solution NMR alone. In this article, we incorporate into XPLOR-NIH a hybrid objective function for membrane protein structure determination that utilizes solution and solid-state NMR restraints, simultaneously defining structure, topology, and depth of insertion. Distance and angular restraints obtained from solution NMR of membrane proteins solubilized in detergent micelles are combined with backbone orientational restraints (chemical shift anisotropy and dipolar couplings) derived from solid-state NMR in aligned lipid bilayers. In addition, a supplementary knowledge-based potential, E _z (insertion depth potential), is used to ensure the correct positioning of secondary structural elements with respect to a virtual membrane. The hybrid objective function is minimized using a simulated annealing protocol implemented into XPLOR-NIH software for general use. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Integration and Oligomerization of Bax Protein in Lipid Bilayers Characterized by Single Molecule Fluorescence Study

Bax is a pro-apoptotic Bcl-2 family protein. The activated Bax translocates to mitochondria, where it forms pore and permeabilizes the mitochondrial outer membrane. This process requires the BH3-only activator protein (i.e. tBid) and can be inhibited by anti-apoptotic Bcl-2 family proteins such as Bcl-x_L. Here by using single molecule fluorescence techniques, we studied the integration and oligomerization of Bax in lipid bilayers. Our study revealed that Bax can bind to lipid membrane spontaneously in the absence of tBid. The Bax pore formation undergoes at least two steps: pre-pore formation and membrane insertion. The activated Bax triggered by tBid or BH3 domain peptide integrates on bilayers and tends to form tetramers, which are termed as pre-pore. Subsequent insertion of the pre-pore into membrane is highly dependent on the composition of cardiolipin in lipid bilayers. Bcl-x_L can translocate Bax from membrane to solution and inhibit the pore formation. The study of Bax integration and oligomerization at the single molecule level provides new evidences that may help elucidate the pore formation of Bax and its regulatory mechanism in apoptosis.     

Temperature dependence of the structure and electrostatics of Newton black Films: insights from computer simulations

Newton black films (NBF) can be obtained from solutions containing ionic surfactants. These thin structures have typical thickness of the order of 3 nm and are similar to biological membranes. An understanding of the NBF structure and stability is of relevance to problems concerned with the biophysics of the cell. From a practical point of view, the stability of NBFs determines the stability of dispersions and foams, which are relevant in a number of industrial areas such as foodstuffs, cosmetics or distillation. In this paper, we investigate the temperature dependence of the structure and electrostatics of sodium dodecyl sulfate (SDS) NBFs using large-scale computer simulations. We show that high temperature black films exibit a dramatic change of the film roughness. Notably, the structural changes in the film occur without a significant modification of the total thickness. The degree of polarization of the water molecules and the electrostatic fields in the NBF also show a very weak dependence on temperature, suggesting that water remains strongly ordered in the NBF even at high temperatures ( ≈ 350 K). We conclude that the anomalous dielectric response observed in NBF at ambient temperature should also be present at high temperatures.     

Conducting polymer polypyrrole supported bilayer lipid membranes

Electrochemically synthesized conducting polymer polypyrrole (PPy) film on gold electrode surface was used as a novel support for bilayer lipid membranes (BLMs). Investigations by surface plasmon resonance (SPR) suggest that dimyristoyl-L-alpha-phosphatidylcholine (DMPC) and dimyristoyl-L-alpha-phosphatidyl-L-serine (DMPS) can form BLMs on PPy film surface but dimyristoyl-L-alpha-phosphatidylglycerol (DMPG) and didodecyldimethylammonium bromide (DDAB) can not do so, indicating the formation of PPy supported bilayer lipid membranes (s-BLMs) is dependent on the chemical structure of the lipids used. The self-assembly of DMPC induces a smoother topography than the PPy layer with rms roughness decreasing from 4.484 to 2.914 nm convinced by atomic force microscopy (AFM). Impedance spectroscopy measurements confirm that the deposition of BLM substantially increases the resistance of the system indicating a very densely packed BLM structures. The little change of PPy film in capacitance shows that solvent and electrolyte ions still retain within the porous PPy film after BLM deposition. Therefore, the PPy supported BLM is to some extent comparable to conventional BLM with aqueous medium retaining at its two sides. As an example and preliminary application, horseradish peroxidase (HRP) reconstituted into the s-BLM shows the expected protein activity and can transfer electron from or to the underlying PPy support for its response to electrocatalytic reduction of hydrogen peroxide in solution. Thus the system maybe possesses potential applications to biomimetic membrane studies.     

Low pH-Induced Pore Formation by the T Domain of Botulinum Toxin Type A is Dependent upon NaCl Concentration

Botulinum neurotoxins (BoNTs) undergo low pH-triggered membrane insertion, resulting in the translocation of their light (catalytic) chains into the cytoplasm. The T (translocation) domain of the BoNT heavy chain is believed to carry out translocation. Here, the behavior of isolated T domain from BoNT type A has been characterized, both in solution and when associated with model membranes. When BoNT T domain prepared in the detergent dodecylmaltoside was diluted into aqueous solution, it exhibited a low pH-dependent conformational change below pH 6. At low pH the T domain associated with, and formed pores within, model membrane vesicles composed of 30 mol% dioleoylphosphatidylglycerol/70 mol% dioleoylphosphatidylcholine. Although T domain interacted with vesicles at low (50 mM) and high (400 mM) NaCl concentrations, the interaction required much less lipid at low salt. However, even at high lipid concentrations pore formation was much more pronounced at low NaCl concentrations than at high NaCl concentration. Increasing salt concentration after insertion in the presence of 50 mM NaCl did not decrease pore formation. A similar effect of NaCl concentration upon pore formation was observed in vesicles composed solely of dioleoylphosphatidylcholine, showing that the effect of NaCl did not solely involve modulation of electrostatic interactions between protein and anionic lipids. These results indicate that some feature of membrane-bound T domain tertiary structure critical for pore formation is highly dependent upon salt concentration.     

A gelatin film procedure for the localization of proteolytic activity in Leucochloridiomorpha constantiae (Trematoda) adults

A gelatin film procedure was used to localize proteolytic activity in the lumen of the intestinal ceca of Leucochloridiomorpha constantiae (Trematoda) adults. Slides were coated with a 7·5% gelatin solution and then fixed in 10% neutral buffered formalin (NBF). Cryostat sections of isolated worms or those attached to the bursa of Fabricius of the domestic chick were affixed to the gelatin film. Experimental and control slides were incubated in a humid chamber for 30 min at 37·5 and 4°C, respectively. Slides were again fixed in NBF, and then stained for protein with mercuric bromphenol blue (MBB). In experimental slides, the lumen of the intestinal ceca was lysed and did not stain, whereas worm and host tissue and the gelatin were protein-positive. Control sections stained uniformly positive for protein. In this procedure tissue is retained on the slide and proteolytic activity can be correlated with a tissue site on the same slide.     

Interactions of fluorinated surfactants with diphtheria toxin T-domain: testing new media for studies of membrane proteins

The principal difficulty in experimental exploration of the folding and stability of membrane proteins (MPs) is their aggregation outside of the native environment of the lipid bilayer. To circumvent this problem, we recently applied fluorinated nondetergent surfactants that act as chemical chaperones. The ideal chaperone surfactant would 1), maintain the MP in solution; 2), minimally perturb the MP's structure; 3), dissociate from the MP during membrane insertion; and 4), not partition into the lipid bilayer. Here, we compare how surfactants with hemifluorinated (HFTAC) and completely fluorinated (FTAC) hydrophobic chains of different length compare to this ideal. Using fluorescence correlation spectroscopy of dye-labeled FTAC and HFTAC, we demonstrate that neither type of surfactant will bind lipid vesicles. Thus, unlike detergents, fluorinated surfactants do not compromise vesicle integrity even at concentrations far in excess of their critical micelle concentration. We examined the interaction of surfactants with a model MP, DTT, using a variety of spectroscopic techniques. Site-selective labeling of DTT with fluorescent dyes indicates that the surfactants do not interact with DTT uniformly, instead concentrating in the most hydrophobic patches. Circular dichroism measurements suggest that the presence of surfactants does not alter the structure of DTT. However, the cooperativity of the thermal unfolding transition is reduced by the presence of surfactants, especially above the critical micelle concentration (a feature of regular detergents, too). The linear dependence of DTT's enthalpy of unfolding on the surfactant concentration is encouraging for future application of (H)FTACs to determine the stability of the membrane-competent conformations of other MPs. The observed reduction in the efficiency of Förster resonance energy transfer between donor-labeled (H)FTACs and acceptor-labeled DTT upon addition of lipid vesicles indicates that the protein sheds the layer of surfactant during its bilayer insertion. We discuss the advantages of fluorinated surfactants over other types of solubilizing agents, with a specific emphasis on their possible applications in thermodynamic measurements.     

Lateral pressure profile, spontaneous curvature frustration, and the incorporation and conformation of proteins in membranes

Lipid-protein interactions are an important determinant of the stability and function of integral and transmembrane proteins. In addition to local interactions at the lipid-protein interface, global interactions such as the distribution of internal lateral pressure may also influence protein conformation. It is shown here that the effects of the membrane lateral pressure profile on the conformation or insertion of proteins in membranes are equivalent to the elastic response to the frustrated spontaneous curvature, c_o, of the component lipid monolayer leaflets. The chemical potential of the protein in the membrane is predicted to depend linearly on the spontaneous curvature of the lipid leaflets, just as does the contribution of the protein to the elastic bending energy of the lipid, and to be independent of the hydrophobic tension, γ_phob, at the lipid-water interface. Analysis of the dependence of protein partitioning or conformational transitions on spontaneous curvature of the constituent lipids gives an experimental estimate for the cross-sectional intramembrane shape of the protein or its difference between conformations. Values in the region of 50-110 Å² are estimated for the effective cross-sectional shape changes on the insertion and conductance transitions of alamethicin, and on the activation of CTP:phosphocholine cytidylyltransferase or rhodopsin in lipid membranes. Much larger values are estimated for the mechanosensitive channel, MscL. Values for the change in intramembrane shape may also be used, together with determinations of lipid relative association constants, to estimate contributions of direct lipid-protein interactions to the lateral pressure experienced by the protein. Changes in chemical potential ∼12 kJ mol⁻¹ can be estimated for radial changes of 1 Å in a protein of diameter 40 Å.     

Function of the second nucleotide-binding fold in the CFTR chloride channel.

To test the role of nucleotide-binding fold (NBF) 2 and its interaction with the regulatory (R) domain in the function of the cystic fibrosis transmembrane conductance regulator (CFTR) channel, we used three deletion mutants of CFTR: DeltaR(708-835), DeltaNBF2(1185-1349) and DeltaR-DeltaNBF2. In lipid bilayers, DeltaNBF2 channel activity is ATP- and cAMP-dependent protein kinase (PKA)-dependent, but unlike wild-type (wt) CFTR, it displays a reduced activity and insensitivity to 5'-adenylylimidodiphosphate (AMP-PNP). Both DeltaR and DeltaR-DeltaNBF2 channels are PKA-independent, but DeltaR activity is reduced whereas DeltaR-DeltaNBF2 activity is increased. Deletion of NBF2 from CFTR affects protein trafficking and channel gating kinetics. The data suggest that NBF2 could have inhibitory and stimulatory roles in CFTR activity by interaction with NBF1 directly or indirectly via the R domain.     

Regulation of KATP Channel Expression and Activity by the SUR1 Nucleotide Binding Fold 1

ATP-sensitive K+ (KATP) channels are oligomeric complexes of pore-forming Kir6 subunits and regulatory Sulfonylurea Receptor (SUR) subunits. SUR, an ATP-Binding Cassette (ABC) transporter, confers Mg-nucleotide stimulation to the channel via nucleotide interactions with its two cytoplasmic domains (Nucleotide Binding Folds 1 and 2; NBF1 and NBF2). Regulation of KATP channel expression is a complex process involving subunit assembly in the ER, SUR glycosylation in the Golgi, and trafficking to the plasma membrane. Dysregulation can occur at different steps of the pathway, as revealed by disease-causing mutations. Here, we have addressed the role of SUR1 NBF1 in gating and expression of reconstituted channels. Deletion of NBF1 severely impairs channel expression and abolishes MgADP stimulation. Total SUR1 protein levels are decreased, suggestive of increased protein degradation, but they are not rescued by treatment with sulfonylureas or the proteasomal inhibitor MG-132. Similar effects of NBF1 deletion are observed in recombinant KATP channels obtained by "splitting" SUR1 into two separate polypeptides (a N-terminal "half" and a C-terminal "half"). Interestingly, the location of the "splitting point" in the vicinity of NBF1 has marked effects on the MgADP stimulation of resulting channels. Finally, ablation of the ER retention motif upstream of NBF1 (in either "split" or full-length SUR1) does not rescue expression of channels lacking NBF1. These results indicate that, in addition to NBF1 being required for MgADP stimulation of the channel, it plays an important role in the regulation of channel expression that is independent of the ER retention checkpoint and the proteasomal degradation pathway.     

The activation energy for insertion of transmembrane alpha-helices is dependent on membrane composition

The physical mechanisms that govern the folding and assembly of integral membrane proteins are poorly understood. It appears that certain properties of the lipid bilayer affect membrane protein folding in vitro, either by modulating helix insertion or packing. In order to begin to understand the origin of this effect, we investigate the effect of lipid forces on the insertion of a transmembrane alpha-helix using a water-soluble, alanine-based peptide, KKAAAIAAAAAIAAWAAIAAAKKKK-amide. This peptide binds to preformed 1,2-dioleoyl-l-alpha-phosphatidylcholine (DOPC) vesicles at neutral pH, but spontaneous transmembrane helix insertion directly from the aqueous phase only occurs at high pH when the Lys residues are de-protonated. These results suggest that the translocation of charge is a major determinant of the activation energy for insertion. Time-resolved measurements of the insertion process at high pH indicate biphasic kinetics with time constants of ca 30 and 430 seconds. The slower phase seems to correlate with formation of a predominantly transmembrane alpha-helical conformation, as determined from the transfer of the tryptophan residue to the hydrocarbon region of the membrane. Temperature-dependent measurements showed that insertion can proceed only above a certain threshold temperature and that the Arrhenius activation energy is of the order of 90 kJ mol(-1). The kinetics, threshold temperature and the activation energy change with the mole fraction of 1,2-dioleoyl-l-alpha-phosphatidylethanolamine (DOPE) introduced into the DOPC membrane. The activation energy increases with increasing DOPE content, which could reflect the fact that this lipid drives the bilayer towards a non-bilayer transition and increases the lateral pressure in the lipid chain region. This suggests that folding events involving the insertion of helical segments across the bilayer can be controlled by lipid forces.     

The Molecular Mechanism Underlying Recruitment and Insertion of Lipid-Anchored LC3 Protein into Membranes

Lipid modification of cytoplasmic proteins initiates membrane engagement that triggers diverse cellular processes. Despite the abundance of lipidated proteins in the human proteome, the key determinants underlying membrane recognition and insertion are poorly understood. Here, we define the course of spontaneous membrane insertion of LC3 protein modified with phosphatidylethanolamine using multiple coarse-grain simulations. The partitioning of the lipid anchor chains proceeds through a concerted process, with its two acyl chains inserting one after the other. Concurrently, a conformational rearrangement involving the α-helix III of LC3, especially in the three basic residues Lys⁶⁵, Arg⁶⁸, and Arg⁶⁹, ensures stable insertion of the phosphatidylethanolamine anchor into membranes. Mutational studies validate the crucial role of these residues, and further live-cell imaging analysis shows a substantial reduction in the formation of autophagic vesicles for the mutant proteins. Our study captures the process of water-favored LC3 protein recruitment to the membrane and thus opens, to our knowledge, new avenues to explore the cellular dynamics underlying vesicular trafficking.     

Measuring protein insertion areas in lipid monolayers by fluorescence correlation spectroscopy

Membrane insertion of protein domains is an important step in many membrane remodeling processes, for example, in vesicular transport. The membrane area taken up by the protein insertion influences the protein binding affinity as well as the mechanical stress induced in the membrane and thereby its curvature. To our knowledge, this is the first optical measurement of this quantity on a system in equilibrium with direct determination of the number of inserted protein and no further assumptions concerning the binding thermodynamics. Whereas macroscopic total area changes in lipid monolayers are typically measured on a Langmuir film balance, finding the number of inserted proteins without perturbing the system and quantitating any small area changes has posed a challenge. Here, we address both issues by performing two-color fluorescence correlation spectroscopy directly on the monolayer. With a fraction of the protein being fluorescently labeled, the number of inserted proteins is determined in situ without resorting to invasive techniques such as collecting the monolayer by aspiration. The second color channel is exploited to monitor a small fraction of labeled lipids to determine the total area increase. Here, we use this method to determine the insertion area per molecule of Sar1, a protein of the COPII complex, which is involved in transport vesicle formation. Sar1 has an N-terminal amphipathic helix, which is responsible for membrane binding and curvature generation. An insertion area of (3.4 ± 0.8) nm² was obtained for Sar1 in monolayers from a lipid mixture typically used in COPII reconstitution experiments, in good agreement with the expected insertion area of the Sar1 amphipathic helix. By using the two-color approach, determining insertion areas relies only on local fluorescence measurements. No macroscopic area measurements are needed, giving the method the potential to also be applied to laterally heterogeneous monolayers and bilayers.     

Size Influences the Effect of Hydrophobic Nanoparticles on Lung Surfactant Model Systems

The alveolar lung surfactant (LS) is a complex lipid protein mixture that forms an interfacial monolayer reducing the surface tension to near zero values and thus preventing the lungs from collapse. Due to the expanding field of nanotechnology and the corresponding unavoidable exposure of human beings from the air, it is crucial to study the potential effects of nanoparticles (NPs) on the structural organization of the lung surfactant system. In the present study, we investigated both, the domain structure in pure DPPC monolayers as well as in lung surfactant model systems. In the pure lipid system we found that two different sized hydrophobic polymeric nanoparticles with diameter of ∼12 nm and ∼136 nm have contrasting effect on the functional and structural behavior. The small nanoparticles inserted into fluid domains at the LE-LC phase transition are not visibly disturbing the phase transition but disrupting the domain morphology of the LE phase. The large nanoparticles led to an expanded isotherm and to a significant decrease in the line tension and thus to a drastic disruption of the domain structures at a much lower number of nanoparticles with respect to the lipid. The surface activity of the model LS films again showed drastic variations due to presence of different sized NPs illustrated by the film balance isotherms and the atomic force microscopy. AFM revealed laterally profuse multilayer protrusion formation on compression but only in the presence of 136 nm sized nanoparticles. Moreover we investigated the vesicle insertion process into a preformed monolayer. A severe inhibition was observed only in the presence of ∼136 nm NPs compared to minor effects in the presence of ∼12 nm NPs. Our study clearly shows that the size of the nanoparticles made of the same material determines the interaction with biological membranes.     

pH dependent insertion of a diphtheria toxin B fragment peptide into the lipid membrane: a conformational analysis

A peptide of diphtheria toxin B fragment (residues 147-266) has been shown to induce pore formation in lipid bilayer membranes at low pH. Such an effect was obtained at a much lower extent or not at all at pH = 7. The region localized between residues 225 and 246 is highly hydrophobic (27.3% polarity) and characterized by a high concentration of proline residues. Since proline cis-trans isomerization is highly sensitive to the pH of the medium, we investigated the capability of the cis and trans isomers to penetrate into the lipid matrix. Obviously, the cis-trans isomerization of proline 242 and 245, assumed to be imposed by a low pH, uncovers the hydrophobic region and induces its insertion into a lipid layer of dipalmitoylphosphatidylcholine. The lipid matrix destabilization resulting from this process could promote the penetration into the lipid bilayer of an amphipatic structure (153-178) similar to the transverse lipid associating domains of membrane proteins.     

Folding is not required for bilayer insertion: replica exchange simulations of an alpha-helical peptide with an explicit lipid bilayer

We implement the replica exchange molecular dynamics algorithm to study the interactions of a model peptide (WALP-16) with an explicitly represented DPPC membrane bilayer. We observe the spontaneous, unbiased insertion of WALP-16 into the DPPC bilayer and its folding into an alpha-helix with a transbilayer orientation. The free energy surface suggests that the insertion of the peptide into the DPPC bilayer precedes secondary structure formation. Although the peptide has some propensity to form a partially helical structure in the interfacial region of the DPPC/water system, this state is not a productive intermediate but rather an off-pathway trap for WALP-16 insertion. Equilibrium simulations show that the observed insertion/folding pathway mirrors the potential of mean force (PMF). Calculation of the enthalpic and entropic contributions to this PMF show that the surface bound conformation of WALP-16 is significantly lower in energy than other conformations, and that the insertion of WALP-16 into the bilayer without regular secondary structure is enthalpically unfavorable by 5-10 kcal/mol/residue. The observed insertion/folding pathway disagrees with the dominant conceptual model, which is that a surface-bound helix is an obligatory intermediate for the insertion of alpha-helical peptides into lipid bilayers. In our simulations, the observed insertion/folding pathway is favored because of a large (>100 kcal/mol) increase in system entropy that occurs when the unstructured WALP-16 peptide enters the lipid bilayer interior. The insertion/folding pathway that is lowest in free energy depends sensitively on the near cancellation of large enthalpic and entropic terms. This suggests the possibility that intrinsic membrane peptides may have a diversity of insertion/folding behaviors depending on the exact system of peptide and lipid under consideration.     

More Than a Pore: The Interplay of Pore-Forming Proteins and Lipid Membranes

Pore-forming proteins (PFPs) punch holes in their target cell membrane to alter their permeability. Permeabilization of lipid membranes by PFPs has received special attention to study the basic molecular mechanisms of protein insertion into membranes and the development of biotechnological tools. PFPs act through a general multi-step mechanism that involves (i) membrane partitioning, (ii) insertion into the hydrophobic core of the bilayer, (iii) oligomerization, and (iv) pore formation. Interestingly, PFPs and membranes show a dynamic interplay. As PFPs are usually produced as soluble proteins, they require a large conformational change for membrane insertion. Moreover, membrane structure is modified upon PFPs insertion. In this context, the toroidal pore model has been proposed to describe a pore architecture in which not only protein molecules but also lipids are directly involved in the structure. Here, we discuss how PFPs and lipids cooperate and remodel each other to achieve pore formation, and explore new evidences of protein-lipid pore structures.     

Membrane insertion pathway of annexin B12: thermodynamic and kinetic characterization by fluorescence correlation spectroscopy and fluorescence quenching

Experimental determination of the free energy stabilizing the structure of membrane proteins in their native lipid environment is undermined by the lack of appropriate methods and suitable model systems. Annexin B12 (ANX) is a soluble protein which reversibly inserts into lipid membranes under mildly acidic conditions, which makes it a good experimental model for thermodynamic studies of folding and stability of membrane proteins. Here we apply fluorescence correlation spectroscopy for quantitative analysis of ANX partitioning into large unilamellar vesicles containing either 25% or 75% anionic lipids. Membrane binding of ANX results in changes of autocorrelation time and amplitude, both of which are used in quantitative analysis. The thermodynamic scheme describing acid-induced membrane interactions of ANX considers two independent processes: pH-dependent formation of a membrane-competent form near the membrane interface and its insertion into the lipid bilayer. Our novel fluorescence lifetime topology method demonstrates that the insertion proceeds via an interfacial refolded intermediate state, which can be stabilized by anionic lipids. Lipid titration measurements are used to determine the free energy of both transmembrane insertion and interfacial penetration, which are found to be similar, approximately -10-12 kcal/mol. The formation of the membrane-competent form, examined in a lipid saturation experiment, was found to depend on the local proton concentration near the membrane interface, occurring with pK = 4.3 and involving the protonation of two residues. Our results demonstrate that fluorescence correlation spectroscopy is a convenient tool for the quantitative characterization of the energetics of transmembrane insertion and that pH-triggered ANX insertion is a useful model for studying the thermodynamic stability of membrane proteins.