Effect of double flasking and investing methods on artificial teeth movement in complete dentures processing

doi: 10.1111/j.1741‐2358.2011.00494.x
Effect of double flasking and investing methods on artificial teeth movement in complete dentures processing Purpose: The aim of this study was to evaluate linear dimensional alterations of artificial teeth for complete dentures when using different investment and flasking techniques. Background: Dimensional changes in the vertical dimension may occur owing to changes in artificial teeth positioning caused by different investing and flasking techniques. Materials and methods: Thirty pairs of the complete dentures were manufactured and randomly divided into three groups (n = 10): (1) invested with type III stone in monomaxillary PVC flask; (2) invested with type III stone in bimaxillary PVC flask; and (3) invested with laboratory silicone in bimaxillary PVC flask. Dentures were polymerised by microwave, and 12 linear distances were measured before and after denture processing. Data were analysed by one‐way anova , considering manufacturing technique as the study factor. Tukey’s HSD was used as post hocanova (p = 0.05). Results: Most of the linear distances were comparable for all groups. All transversal maxillary and mandibular distances were higher for group 1 compared with groups 2 and 3 (p < 0.05), except the distance 3–6 for mandibular arch, in which no difference was found between groups (p < 0.05). Both maxillary diagonal distances were higher in group 1 (p < 0.05), and no differences were found among all groups for mandibular measurements. Conclusions: Double flasking technique independent on the investment material is shown to be the most effective method to reduce changes in artificial teeth positioning.     

In vitro and clinical evaluation of specific dentifrices for complete denture hygiene

Objectives: To study the physical properties of two experimental dentifrices for complete denture hygiene, their effect on denture biofilm removal and antimicrobial properties by means of a clinical trial. Materials and methods: The experimental dentifrices comprised two compositions. One was based on the addition of 1% chloramine T (D1) and the other on the presence of 0.01% fluorosurfactant (D2). Measurements of density, pH, consistency, rheological features and abrasiveness were conducted. Sixty complete denture wearers were randomly assigned to three groups and were instructed to brush their dentures with a specific toothbrush: (1) Water (control); (2) D1; or (3) D2. Each method was used for 21 days. Denture biofilm was disclosed by a 1% neutral red solution and quantified by means of digital photos taken from the internal surface. Microbiological assessment was conducted to quantify Candida sp. and mutans streptococci. Data were evaluated by one‐way anova and Tukey HSD, or Kruskal–Wallis (α = 0.05). Results: Both dentifrices decreased biofilm coverage when compared with the control group. D1 was the most efficacious treatment to reduce mutans streptococci, whereas D2 showed an intermediate outcome (anova , p < 0.040). No treatment influenced Candida albicans or non‐albicans species (Kruskal–Wallis, p = 0.163 and 0.746, respectively). Conclusion: It can be concluded that brushing complete dentures with the experimental dentifrices tested could be effective for the removal of denture biofilm.     

Effect of a denture cleanser on the concentration of volatile sulphur compounds and denture biofilm in institutionalised elderly

doi:10.1111/j.1741‐2358.2009.00341.x
Effect of a denture cleanser on the concentration of volatile sulphur compounds and denture biofilm in institutionalised elderly Objective: To determine the effectiveness of a denture cleanser in reducing the concentration of volatile sulphur compounds (VSC) and its antimicrobial action. Background: Micro‐organisms from the denture biofilm can cause local and systemic disease and halitosis. Denture cleansers are important adjuncts in oral care, but there is limited investigation on their effect in malodour compounds. Material and methods: Nineteen institutionalised elderly who wore at least an upper denture were selected; their VSC concentrations were measured and the denture biofilm was collected. In phase 1, the subjects wore their old denture and data were collected before (B₀) and after 7(A₁), 14(A₂), 28(A₃) days of continuous daily use of the denture cleanser. In phase 2, new dentures were inserted and measurements were made at 30(A_1.1), 60(A_2.2), 90(A_3.3) days of treatment. Results: The VSC concentration increased from B₀ to A₁ (p < 0.05)_, but no differences were found for the others intervals of times. Total micro‐organism data did not show a statistical difference between times in Phase I, but in Phase II, there was a statistical difference (p < 0.05) and a progressive re‐colonisation was observed. Conclusion: Within the limits of this study, it was concluded that the denture cleanser had no antimicrobial effect and VSC levels were not reduced.     

Effect of thermocycling on the flexural and impact strength of urethane-based and high-impact denture base resins

doi: 10.1111/j.1741‐2358.2011.00474.x
Effect of thermocycling on the flexural and impact strength of urethane‐based and high‐impact denture base resins Objective: Mechanical properties of the acrylic resins used for denture fabrication may be influenced by water and temperature. Thus, the aim of this study was to evaluate the effect of thermocycling on the flexural and impact strength of a high‐impact (Lucitone 199) and a urethane‐based denture material (Eclipse). Materials and methods: Flexural strength (64 × 10 × 3.3 mm) and impact strength (60 × 6 × 4 mm) specimens were made following the manufacturers’ instructions and assigned to two groups (n = 10): control (C) – not thermocycled – and T – thermocycled (5000 cycles between 5 and 55°C). Specimens were submitted to three‐point bending and Charpy impact tests. Results: Flexural strength (MPa) and impact strength (kJ/m²) data were analysed with two‐way anova (p = 0.05). The flexural strength of material Eclipse (C, 136.5; T, 130.7) was significantly higher than that of resin Lucitone 550 (C, 99.4; T, 90.1). Material Eclipse exhibited significantly higher impact strength (C, 6.9; T, 5.3) than the resin Lucitone 550 (C, 3.5; T, 3.0). For both materials, a significant decrease in flexural and impact strengths was observed when the specimens were thermocycled. Conclusion: Flexural and impact strengths were higher for Eclipse than for Lucitone 550, in both groups. Thermocycling decreased the flexural and impact strengths of Eclipse and Lucitone 550.