The Shaft of the Type 1 Fimbriae Regulates an External Force to Match the FimH Catch Bond

Type 1 fimbriae mediate adhesion of uropathogenic Escherichia coli to host cells. It has been hypothesized that due to their ability to uncoil under exposure to force, fimbriae can reduce fluid shear stress on the adhesin-receptor interaction by which the bacterium adheres to the surface. In this work, we develop a model that describes how the force on the adhesin-receptor interaction of a type 1 fimbria varies as a bacterium is affected by a time-dependent fluid flow mimicking in vivo conditions. The model combines in vivo hydrodynamic conditions with previously assessed biomechanical properties of the fimbriae. Numerical methods are used to solve for the motion and adhesion force under the presence of time-dependent fluid profiles. It is found that a bacterium tethered with a type 1 pilus will experience significantly reduced shear stress for moderate to high flow velocities and that the maximum stress the adhesin will experience is limited to ∼120 pN, which is sufficient to activate the conformational change of the FimH adhesin into its stronger state but also lower than the force required for breaking it under rapid loading. Our model thus supports the assumption that the type 1 fimbria shaft and the FimH adhesin-receptor interaction are optimized to each other, and that they give piliated bacteria significant advantages in rapidly changing fluidic environments.     

The distinct binding specificities exhibited by enterobacterial type 1 fimbriae are determined by their fimbrial shafts

Type 1 fimbriae of enterobacteria are heteropolymeric organelles of adhesion composed of FimH, a mannose-binding lectin, and a shaft composed primarily of FimA. We compared the binding activities of recombinant clones expressing type 1 fimbriae from Escherichia coli, Klebsiella pneumoniae, and Salmonella typhimurium for gut and uroepithelial cells and for various soluble mannosylated proteins. Each fimbria was characterized by its capacity to bind particular epithelial cells and to aggregate mannoproteins. However, when each respective FimH subunit was cloned and expressed in the absence of its shaft as a fusion protein with MalE, each FimH bound a wide range of mannose-containing compounds. In addition, we found that expression of FimH on a heterologous fimbrial shaft, e.g. K. pneumoniae FimH on the E. coli fimbrial shaft or vice versa, altered the binding specificity of FimH such that it closely resembled that of the native heterologous type 1 fimbriae. Furthermore, attachment to and invasion of bladder epithelial cells, which were mediated much better by native E. coli type 1 fimbriae compared with native K. pneumoniae type 1 fimbriae, were found to be dependent on the background of the fimbrial shaft (E. coli versus K. pneumoniae) rather than the background of the FimH expressed. Thus, the distinct binding specificities of different enterobacterial type 1 fimbriae cannot be ascribed solely to the primary structure of their respective FimH subunits, but are also modulated by the fimbrial shaft on which each FimH subunit is presented, possibly through conformational constraints imposed on FimH by the fimbrial shaft. The capacity of type 1 fimbrial shafts to modulate the tissue tropism of different enterobacterial species represents a novel function for these highly organized structures.     

Uncoiling mechanics of Escherichia coli type I fimbriae are optimized for catch bonds

We determined whether the molecular structures through which force is applied to receptor–ligand pairs are tuned to optimize cell adhesion under flow. The adhesive tethers of our model system, Escherichia coli, are type I fimbriae, which are anchored to the outer membrane of most E. coli strains. They consist of a fimbrial rod (0.3–1.5 μm in length) built from a helically coiled structural subunit, FimA, and an adhesive subunit, FimH, incorporated at the fimbrial tip. Previously reported data suggest that FimH binds to mannosylated ligands on the surfaces of host cells via catch bonds that are enhanced by the shear-originated tensile force. To understand whether the mechanical properties of the fimbrial rod regulate the stability of the FimH–mannose bond, we pulled the fimbriae via a mannosylated tip of an atomic force microscope. Individual fimbriae rapidly elongate for up to 10 μm at forces above 60 pN and rapidly contract again at forces below 25 pN. At intermediate forces, fimbriae change length more slowly, and discrete 5.0 ± 0.3–nm changes in length can be observed, consistent with uncoiling and coiling of the helical quaternary structure of one FimA subunit at a time. The force range at which fimbriae are relatively stable in length is the same as the optimal force range at which FimH–mannose bonds are longest lived. Higher or lower forces, which cause shorter bond lifetimes, cause rapid length changes in the fimbria that help maintain force at the optimal range for sustaining the FimH–mannose interaction. The modulation of force and the rate at which it is transmitted from the bacterial cell to the adhesive catch bond present a novel physiological role for the fimbrial rod in bacterial host cell adhesion. This suggests that the mechanical properties of the fimbrial shaft have codeveloped to optimize the stability of the terminal adhesive under flow.     

Uncoiling Mechanics of Escherichia coli Type I Fimbriae Are Optimized for Catch Bonds

We determined whether the molecular structures through which force is applied to receptor–ligand pairs are tuned to optimize cell adhesion under flow. The adhesive tethers of our model system, Escherichia coli, are type I fimbriae, which are anchored to the outer membrane of most E. coli strains. They consist of a fimbrial rod (0.3–1.5 μm in length) built from a helically coiled structural subunit, FimA, and an adhesive subunit, FimH, incorporated at the fimbrial tip. Previously reported data suggest that FimH binds to mannosylated ligands on the surfaces of host cells via catch bonds that are enhanced by the shear-originated tensile force. To understand whether the mechanical properties of the fimbrial rod regulate the stability of the FimH–mannose bond, we pulled the fimbriae via a mannosylated tip of an atomic force microscope. Individual fimbriae rapidly elongate for up to 10 μm at forces above 60 pN and rapidly contract again at forces below 25 pN. At intermediate forces, fimbriae change length more slowly, and discrete 5.0 ± 0.3–nm changes in length can be observed, consistent with uncoiling and coiling of the helical quaternary structure of one FimA subunit at a time. The force range at which fimbriae are relatively stable in length is the same as the optimal force range at which FimH–mannose bonds are longest lived. Higher or lower forces, which cause shorter bond lifetimes, cause rapid length changes in the fimbria that help maintain force at the optimal range for sustaining the FimH–mannose interaction. The modulation of force and the rate at which it is transmitted from the bacterial cell to the adhesive catch bond present a novel physiological role for the fimbrial rod in bacterial host cell adhesion. This suggests that the mechanical properties of the fimbrial shaft have codeveloped to optimize the stability of the terminal adhesive under flow.     

Fast uncoiling kinetics of F1C pili expressed by uropathogenic <Emphasis Type="Italic">Escherichia coli</Emphasis> are revealed on a single pilus level using force-measuring optical tweezers

Uropathogenic Escherichia coli (UPEC) express various kinds of organelles, so-called pili or fimbriae, that mediate adhesion to host tissue in the urinary tract through specific receptor-adhesin interactions. The biomechanical properties of these pili have been considered important for the ability of bacteria to withstand shear forces from rinsing urine flows. Force-measuring optical tweezers have been used to characterize individual organelles of F1C type expressed by UPEC bacteria with respect to such properties. Qualitatively, the force-versus-elongation response was found to be similar to that of other types of helix-like pili expressed by UPEC, i.e., type 1, P, and S, with force-induced elongation in three regions, one of which represents the important uncoiling mechanism of the helix-like quaternary structure. Quantitatively, the steady-state uncoiling force was assessed as 26.4 ±1.4 pN, which is similar to those of other pili (which range from 21 pN for S_I to 30 pN for type 1). The corner velocity for dynamic response (1,400 nm/s) was found to be larger than those of the other pili (400–700 nm/s for S and P pili, and 6 nm/s for type 1). The kinetics were found to be faster, with a thermal opening rate of 17 Hz, a few times higher than S and P pili, and three orders of magnitude higher than type 1. These data suggest that F1C pili are, like P and S pili, evolutionarily selected to primarily withstand the conditions expressed in the upper urinary tract.     

Fimbriae in Escherichia Coli Isolated from the Small Intestine of Piglets

Ninety E. coli strains, isolated from piglets which had died from neonatal diarrhea, were tested for the presence of K88, K99, 987P and type 1 fimbriae. Two or more types of fimbriae were demonstrated in 14 of the strains, a single fimbria! type in 44 strains while in 32 strains no fimbriae were detected. Of the 14 E. coli strains with more than 1 type of fimbriae, 12;, 10, 8 and 4 strains showed K88, K99, 987P and type 1, respectively. Twelve E. coli strains were isolated from piglets which had died in the neonatal period without showing signs of neonatal diarrhea at necropsy. One strain showed 987P and 3 strains showed type 1 fimbriae, while the remaining 8 strains were unfimbriated. Sixteen fimbriated E. coli strains were subcultured in order to examine the stability of fimbrial expression in the strains. The K88 and the type 1 fimbriae were regularly expressed, while the K99 and 987P were inconsistently demonstrated.     

Helical structure of Bordetella pertussis fimbriae.

The helical structures of Bordetella pertussis fimbriae of serotypes 2 and 6 were determined by optical diffraction analysis of electron micrographs of negatively stained paracrystalline bundles of purified fimbriae. The fimbrial structure is based on an axial repeat of 13 nm that contains five repeating units in two complete turns of a single-start helix. This structure was confirmed by direct measurements of mass per unit length for individual fimbriae performed by dark-field scanning transmission electron microscopy of unstained specimens. These data further established that the helically repeating unit is a monomer of fimbrial protein (Mr congruent to 22,000 for type 2 and Mr congruent to 21,500 for type 6). Radial density profiles calculated from the scanning transmission electron micrographs showed that the fimbria has peak density at its center, i.e., no axial channel, consistent with the results of conventional negative-staining electron microscopy. The radial profile gives an outermost diameter of approximately 7.5 nm, although the peripheral density is, on average, diffuse, allowing sufficient intercalation between adjacent fimbriae to give a center-to-center spacing of approximately 5.5 nm in the paracrystals. Despite serological and biochemical differences between type 2 and type 6 fimbriae, the packing arrangements of their fimbrial subunits are identical. From this observation, we infer that the respective subunits may have in common conserved regions whose packing dictates the helical geometry of the fimbria. It is plausible that a similar mechanism may underlie the phenomenon of phase variations in other systems of bacterial fimbriae.     

Identification and characterization of the genes encoding the type 3 and type 1 fimbrial adhesins of Klebsiella pneumoniae.

Strains of Klebsiella pneumoniae are known to express two morphologically and functionally distinct filaments, the type 3 and the type 1 fimbriae. The gene (mrkD) encoding the adhesion of K. pneumoniae type 3 fimbriae was identified by transcomplementation analysis with the pap fimbrial gene cluster of Escherichia coli. The nucleotide sequence of the mrkD gene was determined. In addition, the determinant coding for the K. pneumoniae type 1 fimbrial adhesion was identified, and its nucleotide sequence was deduced. The predicted amino acid sequences of the K. pneumoniae adhesion proteins are compared, and similarities with the major fimbrial structural proteins (MrkA and FimA) are discussed.     

肺炎克雷伯菌Ⅲ型菌毛的提取与鉴定

将表达Ⅲ型菌毛的肺炎克雷伯菌临床分离株Kp7在改良Minka液体培养基上传代培养,使之充分菌毛化,大量收集菌毛生长良好的细菌,利用热洗脱法分离提取菌毛,经硫酸铵沉淀、透析后进行蔗糖密度梯度离心,收集20%~30%梯度中的蛋白带,经SDS-PAGE电泳可见1条大小在20.5 ku的蛋白条带。提纯菌毛保留了甘露糖抵抗血凝特性,并与用Kp7全菌免疫家兔制备的高免血清在Western blot中反应呈阳性,证实其条带为Ⅲ型菌毛主要结构蛋白。     

A cryptic fimbrial gene in Serratia marcescens.

The gene coding for the mannose-sensitive hemagglutinating fimbriae in Serratia marcescens US5 was cloned into Escherichia coli K4 with a cosmid vector system. One of the transformants, US5-1, expressed two morphologically distinct fimbriae, one that was 5-nm wide and one that was 3-nm wide. The latter fimbria was morphologically and serologically indistinguishable from that of strain US5. Genetic analysis of transformant US5-1 showed that the gene responsible for the 5-nm-wide fimbriae was located more than 10 kilobases away from the gene responsible for the 3-nm-wide fimbriae. The molecular sizes of the subunits of these two fimbriae, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, were 19 kilodaltons for the 3-nm-wide fimbriae and 20 kilodaltons for the 5-nm-wide fimbriae. Serologically, the 5-nm-wide fimbriae did not cross-react with monoclonal or polyclonal antibodies raised against the mannose-sensitive hemagglutinating fimbriae of strain US5. Strain EL101, which expressed only the 5-nm-wide fimbriae, did not agglutinate chicken or human erythrocytes. These experimental results suggest that the gene for the 5-nm-wide fimbriae is cryptic in strain US5 and is expressed in E. coli K4 only after it is moved by transformation.     

Type 1 fimbria-mediated adhesion of enteric bacteria to grass roots

Type 1 fimbriae of Klebsiella pneumoniae and Enterobacter agglomerans mediated bacterial adhesion to the roots of bluegrass, Poa pratensis. Purified, radiolabeled fimbriae bound to grass roots in vitro; binding was inhibited by alpha-methyl-d-mannoside or Fab fragments to the fimbriae. Anti-type 1 fimbriae Fab fragments and alpha-methyl-d-mannoside also inhibited adhesion of type 1-fimbriated bacteria to P. pratensis roots. It is proposed that associative nitrogen fixation by Klebsiella and Enterobacter strains also involves type 1 fimbriae, in addition to the type 3 fimbriae of Klebsiella spp. (T. K. Korhonen, E. Tarkka, H. Ranta, and K. Haahtela, J. Bacteriol. 155:860-865, 1983).     

大肠杆菌K88ac菌毛操纵子fae全基因的克隆、表达及生物学活性初步研究

目的：在体外克隆和表达猪肠产毒性大肠杆菌（ETEC）K88ae菌毛操纵子,触结构基因,并检测重组菌毛的相关生物学活性。方法：利用长PCR技术以猪ETECK88ae株C83902基因组DNA为模板扩增编码K88菌毛操纵子触基因,克隆入表达质粒载体pBR322,构建和筛选重组质粒pBR322-fae,转化至不含任何菌毛的大肠杆菌EP株;电镜观察重组菌表面菌毛表达情况;用热抽提法提纯表达的重组菌毛;用纯化菌毛免疫小鼠制备高效价抗血清;用SDS-PAGE和Western blot检测重组菌毛的抗原性,用细胞黏附和黏附抑制试验检测其生物学活性。结果和结论：在电镜下观察到重组菌表面大量表达K88ae菌毛,该重组菌与兔抗K88ae菌毛单因子阳性血清、鼠抗K88ac菌毛单克隆抗体均产生凝集反应;纯化菌毛经SDS-PAGE,结构单位菌毛呈单一的相对分子质量约26×10^3的蛋白条带;纯化菌毛免疫小鼠后可制备出高效价的鼠抗血清,玻板凝集试验和Western blot结果表明体外表达的K88ae菌毛具有与K88ae野生菌毛相同的抗原性;猪小肠上皮细胞系黏附和黏附抑制实验结果表明重组EP菌和野生菌株一样具有较强的黏附猪小肠上皮细胞系的能力,而且提纯重组菌毛制备出的鼠抗血清能有效抑制上述重组菌或野生菌株对猪小肠上皮细胞系的黏附结合。     

Time and force dependence of the rupture of glycoprotein IIb-IIIa-fibrinogen bonds between latex spheres

We studied the shear-induced breakup of doublets of aldehyde/sulfate (A/S) latex spheres covalently linked with purified platelet GPIIb-IIIa receptor, and cross-linked by fibrinogen. Flow cytometry with fluorescein isothiocyanate-fibrinogen showed than an average of 22,500 molecules of active GPIIb-IIIa were captured per sphere, with a mean K(d) = 56 nM for fibrinogen binding. The spheres, suspended in buffered 19% Ficoll 400 containing 120 or 240 pM fibrinogen, were subjected to Couette flow in a counter-rotating cone-plate rheoscope. Doublets, formed by two-body collisions at low shear rate (G = 8 s(-1)) for < or =15 min, were subjected to shear stress from 0.6 to 2.9 Nm(-2), their rotations recorded until they broke up or were lost to view. Although breakup was time dependent, occurring mostly in the first 2 rotations after the onset of shear, the percentage of doublets broken up after 10 rotations were almost independent of normal hydrodynamic force, F(n): at 240 pN, 15.6, 16.0, and 17.0% broke up in the force range 70-150 pN, 150-230 pN, and 230-310 pN. Unexpectedly, at both [fibrinogen], the initial rate of breakup was highest in the lowest force range, and computer simulation using a stochastic model of breakup was unable to simulate the time course of breakup. When pre-sheared at low G for >15 min, no doublets broke up within 10 rotations at 70 < F(n) < 310 pN; it required >3 min shear (>1110 rotations) at F(n) = 210 pN for significant breakup to occur. Other published work has shown that binding of fibrinogen to GPIIb-IIIa immobilized on plane surfaces exhibits an initial fast reversible process with relative low affinity succeeded by transformation of GPIIb-IIIa to a stable high-affinity complex. We postulate that most doublet breakups observed within 10 rotations were from a population of young doublets having low numbers of bonds, by dissociation of the initial receptor complex relatively unresponsive to force. The remaining, older doublets with GPIIb-IIIa in the high-affinity complex were not broken up in the time or range of forces studied.     

Single-Cell Force Spectroscopy of Interaction of Lipopolysaccharides from <Emphasis Type="Italic">Yersinia pseudotuberculosis</Emphasis> and <Emphasis Type="Italic">Yersinia pestis</Emphasis> with J774 Macrophage Membrane Using Optical Tweezers

In order to investigate quantitatively the role of lipopolysaccharides (LPS) from outer bacterial membrane at the initial state of bacterium adhesion to a host cell membrane, a model system for single cell force spectroscopy was developed and used. The system comprised of an LPS-coated microsphere placed into optical trap and a J774 macrophage being approached the microsphere to initiate their binding and then moved back to rupture the bond. An “object shadow” phenomenon was discovered, manifested as large-scale variations of the signal of photodetector registering the trapped microsphere displacement, such variations emerging long before the actual interaction between the macrophage and microsphere. The theory and the measurements technique were developed for registration of the force required for detachment of bounded microsphere from the object investigated by means of optical tweezers under the “object shadow” conditions. Characteristic spectra of binding force between J774 macrophage and microspheres functionalized with various LPS, as well as LPS plus complementary antibodies preparations were obtained at the rate of detachment force application of 3–6 pN/s. Force spectrum characteristic of Yersinia pseudotuberculosis LPS possessing O-antigen had a maximum at ~14 pN with half-width of ~23 pN. The treatment of O-antigen with complementary antibodies resulted in transformation of this spectrum into a spectrum with maximum at ~10 pN and half-width of ~14 pN, being almost identical to the spectrum of Y. pestis LPS devoid of O-antigen, with a maximum at ~9 pN and half-width of ~13 pN. A possible mechanism of force spectra formation has been proposed under assumptions of nonspecific binding of O-antigen and probable receptor-type binding of LPS core region to the macrophage surface. The elastic modulus of macrophage envelope, as estimated using analysis of displacement of the contacting microsphere as an indenter, was ≈0.17 pN/nm.     

Assessing adhesion forces of type I and type IV pili of Xylella fastidiosa bacteria by use of a microfluidic flow chamber

Xylella fastidiosa, a bacterium responsible for Pierce's disease in grapevines, possesses both type I and type IV pili at the same cell pole. Type IV pili facilitate twitching motility, and type I pili are involved in biofilm development. The adhesiveness of the bacteria and the roles of the two pili types in attachment to a glass substratum were evaluated using a microfluidic flow chamber in conjunction with pilus-defective mutants. The average adhesion force necessary to detach wild-type X. fastidiosa cells was 147 +/- 11 pN. Mutant cells possessing only type I pili required a force of 204 +/- 22 pN for removal, whereas cells possessing only type IV pili required 119 +/- 8 pN to dislodge these cells. The experimental results demonstrate that microfluidic flow chambers are useful and convenient tools for assessing the drag forces necessary for detaching bacterial cells and that with specific pilus mutants, the role of the pilus type can be further assessed.     

Characterization of the type 3 fimbriae with different MrkD adhesins: possible role of the MrkD containing an RGD motif

Four novel mrkD alleles namely mrkD(V1), mrkD(V2), mrkD(V3), and mrkD(V4) were identified in seventeen Klebsiella pneumoniae meningitis strains using PCR-RFLP and sequence determination. Comparative analysis revealed a most variable region containing an RGD motif in the receptor domain of MrkD(V3). In order to determine if the sequence confers the K. pneumoniae mrkD(V3) the highest level of the fimbrial activity, a type 3 fimbriae display system was constructed in Escherichia coli. The E. coli JM109[pmrkABCD(V3)F] displaying meshwork-like fimbriae also had the most fimbrial activity, supporting a possible role of the varied sequences. In a dose-dependent manner, the GRGDSP hexapeptide appeared to inhibit the adhesion of the E. coli JM109[pmrkABCD(V3)F] to HCT-8, an ileocecal epithelial cell line. In addition, the adhesion activity was reduced by the addition of anti-alpha5beta1 integrin monoclonal antibody, indicating that the RGD containing region in MrkD(V3) is responsible for the binding of type 3 fimbriae to integrin.     

Fragmentation of Escherichia coli type 1 fimbriae exposes cryptic D-mannose-binding sites.

Cells of the gram-negative bacterium Escherichia coli are able to attach to various host cells by means of a mannose-specific adhesin associated with type 1 fimbriae. Here we show that fragmentation of type 1 fimbriae by freezing and thawing results in increased mannose-binding activity as demonstrated by increased hemagglutination, increased stimulation of human lymphocyte proliferation, and increased binding of the mannose-containing enzyme horseradish peroxidase. Increased activity in all three assays was mannose sensitive and was not exhibited by FimH- mutant type 1 fimbriae lacking the adhesin. Scatchard analysis of the data from peroxidase binding assays showed that unfrozen and frozen fimbriae contain binding sites displaying two classes of affinity. Frozen and thawed fimbriae expressed an increase in the number of high-affinity binding sites. These results show that fragmentation of the fimbrial structure exposes cryptic mannose-binding activity associated with type 1 fimbriae, presumably that of internally located adhesin molecules. Our data support earlier observations that adhesin moieties of type 1 fimbriae are located both at the tips and at intervals along the length of the fimbriae. In addition, our data suggest that only the adhesin moieties that are located at the fimbrial tips are functional in binding mannose. Adhesins located along the length of the fimbriae have their mannose-binding activity buried within the fimbrial structure and hence are not functional. We propose an updated model for the structure of type 1 fimbriae that is in agreement with the above observations.